Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 02 6月, 2007 1 次提交
  3. 30 5月, 2007 2 次提交
  5. 17 5月, 2007 1 次提交
  7. 10 5月, 2007 7 次提交
    • L
      acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC commands · 00eb43a1
      由 Lennart Poettering 提交于 
      The ACPI EC that is used in MSI laptops knows some non-standard
commands for changing the screen brighntess and a few other things,
which are used by the msi-laptop.c driver. Unfortunately for these
commands no GPE events for IBF and OBF are triggered. Since nowadays
the EC code uses the ec_intr=1 mode by default, this causes these
operations to timeout, although they don't fail. In result, all
operations that you can do with the msi-laptop.c driver take more or
less 1s to complete, which is awfully slow.

In one of the more recent kernels (2.6.20?) the EC subsystem has been
revamped. With that change the EC timeout has been increased. before
that increase the MSI EC accesses were slow -- but not *that* slow,
hence I took notice of this limitation of the MSI EC hardware only very
recently.

The standard EC operations on the MSI EC as defined in the ACPI spec
support GPE events properly.

The following patch adds a new argument "force_poll" to the
ec_transaction() function (and friends). If set to 1, the function
will poll for IBF/OBF even if ec_intr=1 is enabled. If set to 0 the
current behaviour is used. The msi-laptop driver is modified to make
use of this new flag, so that OBF/IBF is polled for the special MSI EC
transactions -- but only for them.
Signed-off-by: NLennart Poettering <mzxreary@0pointer.de>
Acked-by: NAlexey Starikovskiy <aystarik@gmail.com>
Signed-off-by: NLen Brown <len.brown@intel.com>
      00eb43a1
    • L
      ACPICA: Lindent · fd350943
      由 Len Brown 提交于 
      Signed-off-by: NLen Brown <len.brown@intel.com>
      fd350943
    • A
      ACPI: created a dedicated workqueue for notify() execution · 88db5e14
      由 Alexey Starikovskiy 提交于 
      HP nx6125/nx6325/... machines have a _GPE handler with an infinite
loop sending Notify() events to different ACPI subsystems.

Notify handler in ACPI driver is a C-routine, which may call ACPI
interpreter again to get access to some ACPI variables
(acpi_evaluate_xxx).
On these HP machines such an evaluation changes state of some variable
and lets the loop above break.

In the current ACPI implementation Notify requests are being deferred
to the same kacpid workqueue on which the above GPE handler with
infinite loop is executing. Thus we have a deadlock -- loop will
continue to spin, sending notify events, and at the same time
preventing these notify events from being run on a workqueue. All
notify events are deferred, thus we see increase in memory consumption
noticed by author of the thread. Also as GPE handling is bloked,
machines overheat. Eventually by external poll of the same
acpi_evaluate, kacpid is released and all the queued notify events are
free to run, thus 100% cpu utilization by kacpid for several seconds
or more.

To prevent all these horrors it's needed to not put notify events to
kacpid workqueue by either executing them immediately or putting them
on some other thread. It's dangerous to execute notify events in
place, as it will put several ACPI interpreter stacks on top of each
other (at least 4 in case of nx6125), thus causing kernel  stack
overflow.

First attempt to create a new thread was done by Peter Wainwright
He created a bunch of threads, which were stealing work from a kacpid
workqueue.
This patch appeared in 2.6.15 kernel shipped with Ubuntu 6.06 LTS.

Second attempt was done by me, I created a new thread for each Notify
event. This worked OK on HP nx machines, but broke Linus' Compaq
n620c, by producing threads with a speed what they stopped the machine
completely. Thus this patch was reverted from 18-rc2 as I remember.
I re-made the patch to create second workqueue just for notify events,
thus hopping it will not break Linus' machine. Patch was tested on the
same HP nx machines in #5534 and #7122, but I did not received reply
from Linus on a test patch sent to him.
Patch went to 19-rc and was rejected with much fanfare again.
There was 4th patch, which inserted schedule_timeout(1) into deferred
execution of kacpid, if we had any notify requests pending, but Linus
decided that it was too complex (involved either changes to workqueue
to see if it's empty or atomic inc/dec).
Now you see last variant which adds yield() to every GPE execution.

http://bugzilla.kernel.org/show_bug.cgi?id=5534
http://bugzilla.kernel.org/show_bug.cgi?id=8385Signed-off-by: NAlexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>
      88db5e14
    • L
      Revert "ACPICA: fix AML mutex re-entrancy" · 262a7a28
      由 Len Brown 提交于 
      This reverts commit c0d127b5.

These changes to AML locking were made to allow
Notify handlers to be called on the stack
and not deadlock.  However, that scheme turns
out to be flawed and was reverted by the previous commit,
so this commit restores the locking to it previous design.
Signed-off-by: NLen Brown <len.brown@intel.com>
      262a7a28
    • L
      Revert "Execute AML Notify() requests on stack." · 40d07080
      由 Len Brown 提交于 
      This reverts commit 5f7748cf.

While that change fixed the HP
http://bugzilla.kernel.org/show_bug.cgi?id=5534

it broke the ACER:
http://bugzilla.kernel.org/show_bug.cgi?id=8385
which as AML that caused Linux go recursive
and stack fault.

So this commit by itself will restore the ACER
and again break the HP, which we'll fix another way.
Signed-off-by: NLen Brown <len.brown@intel.com>
      40d07080
    • L
      Revert "ACPICA: revert "acpi_serialize" changes" · 4d2acd9e
      由 Len Brown 提交于 
      This reverts commit a8f4af6d.
Thus restoring ACPICA's new acpi_serialize code.

This commit by itself may cause a regression, but
it is reverted in this order so that subsequent
reverts reverts under this one can be made
without conflict.
Signed-off-by: NLen Brown <len.brown@intel.com>
      4d2acd9e
    • R
      PM: Separate hibernation code from suspend code · a3d25c27
      由 Rafael J. Wysocki 提交于 
      [ With Johannes Berg <johannes@sipsolutions.net> ]

Separate the hibernation (aka suspend to disk code) from the other suspend
code.  In particular:

 * Remove the definitions related to hibernation from include/linux/pm.h
 * Introduce struct hibernation_ops and a new hibernate() function to hibernate
   the system, defined in include/linux/suspend.h
 * Separate suspend code in kernel/power/main.c from hibernation-related code
   in kernel/power/disk.c and kernel/power/user.c (with the help of
   hibernation_ops)
 * Switch ACPI (the only user of pm_ops.pm_disk_mode) to hibernation_ops
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a3d25c27
  9. 09 5月, 2007 6 次提交
  11. 08 5月, 2007 1 次提交
  13. 03 5月, 2007 1 次提交
    • J
      [PATCH] x86: Log reason why TSC was marked unstable · 5a90cf20
      由 john stultz 提交于 
      Change mark_tsc_unstable() so it takes a string argument, which holds the
reason the TSC was marked unstable.

This is then displayed the first time mark_tsc_unstable is called.

This should help us better debug why the TSC was marked unstable on certain
systems and allow us to make sure we're not being overly paranoid when
throwing out this troublesome clocksource.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
      5a90cf20
  15. 01 5月, 2007 3 次提交
    • L
      ACPI: delete un-reliable concept of cooling mode · eaca2d3f
      由 Len Brown 提交于 
      The scheme where the thermal driver displayed the
cooling mode /proc/acpi/thermal_zone/*/cooling_mode
was flawed in two ways.

First, the success of _SCP doesn't actually mean
that the BIOS moved any trip points.
On many BIOS, _SCP is present, but does nothing.
So displaying what _SCP executed actually
was wrong more times than it was right.

Second, examining the relative position of the
trip points when the thermal_zone is added
is insufficient -- as the BIOS reserves the right
to change the trip points at run-time.

The only reliable way for the user to determine if
the thermal zone is in active, passive, or critical
mode is to examine the relative position of the trip points.
The user can do this without the kernel doing it
for them by looking in /proc/acpi/thermal_zone/*/trip_points

New contents for /proc/acpi/thermal_zone/*/cooling_mode:

If _SCP available:
"0 - Active; 1 - Passive\n"

If _SCP unavailable:
"<setting not supported>\n"
Signed-off-by: NLen Brown <len.brown@intel.com>
      eaca2d3f
    • L
      ACPI: thermal trip points are read-only · 11ccc0f2
      由 Len Brown 提交于 
      /proc/acpi/thermal_zone/*/trip_points displays
what the kernel reads from the BIOS via ACPI.

If you echo a string of ':' deliminted numbers to this file
then it will change what it displays.

But it shouldn't, since the kernel has no way to communicate
these changes to ACPI thermal zones.  ACPI thermal zone
trip points are read-only.

The kernel does have the opportunity to ask the BIOS to change
the trip points with _SCP - Set Cooling Policy.

Request Active Cooling Mode:
# echo 0 > /proc/acpi/thermal_zone/*/cooling_policy

Request Passive Cooling Mode:
# echo 1 > /proc/acpi/thermal_zone/*/cooling_policy

However, in practice it is quite rare for the BIOS
to support the optional _SCP, and it is even more rare
for the BIOS to export an _SCP that actually changes
the trip points.
Signed-off-by: NLen Brown <len.brown@intel.com>
      11ccc0f2
    • J
      power management: implement pm_ops.valid for everybody · e8c9c502
      由 Johannes Berg 提交于 
      Almost all users of pm_ops only support mem sleep, don't check in .valid and
don't reject any others in .prepare so users can be confused if they check
/sys/power/state, especially when new states are added (these would then
result in s-t-r although they're supposed to be something different).

This patch implements a generic pm_valid_only_mem function that is then
exported for users and puts it to use in almost all existing pm_ops.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: NPavel Machek <pavel@ucw.cz>
Cc: linux-pm@lists.linux-foundation.org
Cc: Len Brown <lenb@kernel.org>
Acked-by: NRussell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e8c9c502
  17. 29 4月, 2007 1 次提交
  19. 27 4月, 2007 1 次提交
  21. 26 4月, 2007 5 次提交
  23. 24 4月, 2007 1 次提交
  25. 31 3月, 2007 1 次提交
  27. 29 3月, 2007 1 次提交
  29. 26 3月, 2007 6 次提交
  31. 24 3月, 2007 1 次提交
  33. 23 3月, 2007 1 次提交