For nested virtualization L0 KVM is managing a bit of state for L2 guests,
this state can not be captured through the currently available IOCTLs. In
fact the state captured through all of these IOCTLs is usually a mix of L1
and L2 state. It is also dependent on whether the L2 guest was running at
the moment when the process was interrupted to save its state.

With this capability, there are two new vcpu ioctls: KVM_GET_NESTED_STATE
and KVM_SET_NESTED_STATE. These can be used for saving and restoring a VM
that is in VMX operation.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NJim Mattson <jmattson@google.com>
[karahmed@ - rename structs and functions and make them ready for AMD and
             address previous comments.
           - handle nested.smm state.
           - rebase & a bit of refactoring.
           - Merge 7/8 and 8/8 into one patch. ]
Signed-off-by: NKarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If the vCPU enters system management mode while running a nested guest,
RSM starts processing the vmentry while still in SMM.  In that case,
however, the pages pointed to by the vmcs12 might be incorrectly
loaded from SMRAM.  To avoid this, delay the handling of the pages
until just before the next vmentry.  This is done with a new request
and a new entry in kvm_x86_ops, which we will be able to reuse for
nested VMX state migration.

Extracted from a patch by Jim Mattson and KarimAllah Ahmed.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

APM_DO_POP_SEGS does not restore fs/gs which were zeroed by
APM_DO_ZERO_SEGS. Trying to access __preempt_count with
zeroed fs doesn't really work.

Move the ibrs call outside the APM_DO_SAVE_SEGS/APM_DO_RESTORE_SEGS
invocations so that fs is actually restored before calling
preempt_enable().

Fixes the following sort of oopses:
[    0.313581] general protection fault: 0000 [#1] PREEMPT SMP
[    0.313803] Modules linked in:
[    0.314040] CPU: 0 PID: 268 Comm: kapmd Not tainted 4.16.0-rc1-triton-bisect-00090-gdd84441a #19
[    0.316161] EIP: __apm_bios_call_simple+0xc8/0x170
[    0.316161] EFLAGS: 00210016 CPU: 0
[    0.316161] EAX: 00000102 EBX: 00000000 ECX: 00000102 EDX: 00000000
[    0.316161] ESI: 0000530e EDI: dea95f64 EBP: dea95f18 ESP: dea95ef0
[    0.316161]  DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[    0.316161] CR0: 80050033 CR2: 00000000 CR3: 015d3000 CR4: 000006d0
[    0.316161] Call Trace:
[    0.316161]  ? cpumask_weight.constprop.15+0x20/0x20
[    0.316161]  on_cpu0+0x44/0x70
[    0.316161]  apm+0x54e/0x720
[    0.316161]  ? __switch_to_asm+0x26/0x40
[    0.316161]  ? __schedule+0x17d/0x590
[    0.316161]  kthread+0xc0/0xf0
[    0.316161]  ? proc_apm_show+0x150/0x150
[    0.316161]  ? kthread_create_worker_on_cpu+0x20/0x20
[    0.316161]  ret_from_fork+0x2e/0x38
[    0.316161] Code: da 8e c2 8e e2 8e ea 57 55 2e ff 1d e0 bb 5d b1 0f 92 c3 5d 5f 07 1f 89 47 0c 90 8d b4 26 00 00 00 00 90 8d b4 26 00 00 00 00 90 <64> ff 0d 84 16 5c b1 74 7f 8b 45 dc 8e e0 8b 45 d8 8e e8 8b 45
[    0.316161] EIP: __apm_bios_call_simple+0xc8/0x170 SS:ESP: 0068:dea95ef0
[    0.316161] ---[ end trace 656253db2deaa12c ]---

Fixes: dd84441a ("x86/speculation: Use IBRS if available before calling into firmware")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Cc:  David Woodhouse <dwmw@amazon.co.uk>
Cc:  "H. Peter Anvin" <hpa@zytor.com>
Cc:  x86@kernel.org
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180709133534.5963-1-ville.syrjala@linux.intel.com

All copy_to_user() implementations need to be prepared to handle faults
accessing userspace. The __memcpy_mcsafe() implementation handles both
mmu-faults on the user destination and machine-check-exceptions on the
source buffer. However, the memcpy_mcsafe() wrapper may silently
fallback to memcpy() depending on build options and cpu-capabilities.

Force copy_to_user_mcsafe() to always use __memcpy_mcsafe() when
available, and otherwise disable all of the copy_to_user_mcsafe()
infrastructure when __memcpy_mcsafe() is not available, i.e.
CONFIG_X86_MCE=n.

This fixes crashes of the form:
    run fstests generic/323 at 2018-07-02 12:46:23
    BUG: unable to handle kernel paging request at 00007f0d50001000
    RIP: 0010:__memcpy+0x12/0x20
    [..]
    Call Trace:
     copyout_mcsafe+0x3a/0x50
     _copy_to_iter_mcsafe+0xa1/0x4a0
     ? dax_alive+0x30/0x50
     dax_iomap_actor+0x1f9/0x280
     ? dax_iomap_rw+0x100/0x100
     iomap_apply+0xba/0x130
     ? dax_iomap_rw+0x100/0x100
     dax_iomap_rw+0x95/0x100
     ? dax_iomap_rw+0x100/0x100
     xfs_file_dax_read+0x7b/0x1d0 [xfs]
     xfs_file_read_iter+0xa7/0xc0 [xfs]
     aio_read+0x11c/0x1a0
Reported-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Tested-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Fixes: 8780356e ("x86/asm/memcpy_mcsafe: Define copy_to_iter_mcsafe()")
Link: http://lkml.kernel.org/r/153108277790.37979.1486841789275803399.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The IPI hypercalls depend on being able to map the Linux notion of CPU ID
to the hypervisor's notion of the CPU ID. The array hv_vp_index[] provides
this mapping. Code for populating this array depends on the IPI functionality.
Break this circular dependency.

[ tglx: Use a proper define instead of '-1' with a u32 variable as pointed
  	out by Vitaly ]

Fixes: 68bb7bfb ("X86/Hyper-V: Enable IPI enlightenments")
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NMichael Kelley <mikelley@microsoft.com>
Cc: gregkh@linuxfoundation.org
Cc: devel@linuxdriverproject.org
Cc: olaf@aepfle.de
Cc: apw@canonical.com
Cc: jasowang@redhat.com
Cc: hpa@zytor.com
Cc: sthemmin@microsoft.com
Cc: Michael.H.Kelley@microsoft.com
Cc: vkuznets@redhat.com
Link: https://lkml.kernel.org/r/20180703230155.15160-1-kys@linuxonhyperv.com

native_save_fl() is marked static inline, but by using it as
a function pointer in arch/x86/kernel/paravirt.c, it MUST be outlined.

paravirt's use of native_save_fl() also requires that no GPRs other than
%rax are clobbered.

Compilers have different heuristics which they use to emit stack guard
code, the emittance of which can break paravirt's callee saved assumption
by clobbering %rcx.

Marking a function definition extern inline means that if this version
cannot be inlined, then the out-of-line version will be preferred. By
having the out-of-line version be implemented in assembly, it cannot be
instrumented with a stack protector, which might violate custom calling
conventions that code like paravirt rely on.

The semantics of extern inline has changed since gnu89. This means that
folks using GCC versions >= 5.1 may see symbol redefinition errors at
link time for subdirs that override KBUILD_CFLAGS (making the C standard
used implicit) regardless of this patch. This has been cleaned up
earlier in the patch set, but is left as a note in the commit message
for future travelers.

Reports:
 https://lkml.org/lkml/2018/5/7/534
 https://github.com/ClangBuiltLinux/linux/issues/16

Discussion:
 https://bugs.llvm.org/show_bug.cgi?id=37512
 https://lkml.org/lkml/2018/5/24/1371

Thanks to the many folks that participated in the discussion.
Debugged-by: NAlistair Strachan <astrachan@google.com>
Debugged-by: NMatthias Kaehlcke <mka@chromium.org>
Suggested-by: NArnd Bergmann <arnd@arndb.de>
Suggested-by: NH. Peter Anvin <hpa@zytor.com>
Suggested-by: NTom Stellar <tstellar@redhat.com>
Reported-by: NSedat Dilek <sedat.dilek@gmail.com>
Tested-by: NSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: NNick Desaulniers <ndesaulniers@google.com>
Acked-by: NJuergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@redhat.com
Cc: akataria@vmware.com
Cc: akpm@linux-foundation.org
Cc: andrea.parri@amarulasolutions.com
Cc: ard.biesheuvel@linaro.org
Cc: aryabinin@virtuozzo.com
Cc: astrachan@google.com
Cc: boris.ostrovsky@oracle.com
Cc: brijesh.singh@amd.com
Cc: caoj.fnst@cn.fujitsu.com
Cc: geert@linux-m68k.org
Cc: ghackmann@google.com
Cc: gregkh@linuxfoundation.org
Cc: jan.kiszka@siemens.com
Cc: jarkko.sakkinen@linux.intel.com
Cc: joe@perches.com
Cc: jpoimboe@redhat.com
Cc: keescook@google.com
Cc: kirill.shutemov@linux.intel.com
Cc: kstewart@linuxfoundation.org
Cc: linux-efi@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Cc: manojgupta@google.com
Cc: mawilcox@microsoft.com
Cc: michal.lkml@markovi.net
Cc: mjg59@google.com
Cc: mka@chromium.org
Cc: pombredanne@nexb.com
Cc: rientjes@google.com
Cc: rostedt@goodmis.org
Cc: thomas.lendacky@amd.com
Cc: tweek@google.com
Cc: virtualization@lists.linux-foundation.org
Cc: will.deacon@arm.com
Cc: yamada.masahiro@socionext.com
Link: http://lkml.kernel.org/r/20180621162324.36656-4-ndesaulniers@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

i386 and x86-64 uses different registers for arguments; make them
available so we don't have to #ifdef in the actual code.

Native size and specified size (q, l, w, b) versions are provided.
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: NNick Desaulniers <ndesaulniers@google.com>
Reviewed-by: NSedat Dilek <sedat.dilek@gmail.com>
Acked-by: NJuergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@redhat.com
Cc: akataria@vmware.com
Cc: akpm@linux-foundation.org
Cc: andrea.parri@amarulasolutions.com
Cc: ard.biesheuvel@linaro.org
Cc: arnd@arndb.de
Cc: aryabinin@virtuozzo.com
Cc: astrachan@google.com
Cc: boris.ostrovsky@oracle.com
Cc: brijesh.singh@amd.com
Cc: caoj.fnst@cn.fujitsu.com
Cc: geert@linux-m68k.org
Cc: ghackmann@google.com
Cc: gregkh@linuxfoundation.org
Cc: jan.kiszka@siemens.com
Cc: jarkko.sakkinen@linux.intel.com
Cc: joe@perches.com
Cc: jpoimboe@redhat.com
Cc: keescook@google.com
Cc: kirill.shutemov@linux.intel.com
Cc: kstewart@linuxfoundation.org
Cc: linux-efi@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Cc: manojgupta@google.com
Cc: mawilcox@microsoft.com
Cc: michal.lkml@markovi.net
Cc: mjg59@google.com
Cc: mka@chromium.org
Cc: pombredanne@nexb.com
Cc: rientjes@google.com
Cc: rostedt@goodmis.org
Cc: thomas.lendacky@amd.com
Cc: tstellar@redhat.com
Cc: tweek@google.com
Cc: virtualization@lists.linux-foundation.org
Cc: will.deacon@arm.com
Cc: yamada.masahiro@socionext.com
Link: http://lkml.kernel.org/r/20180621162324.36656-3-ndesaulniers@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This reverts the following commits:

  1ea66554 ("x86/mm: Mark p4d_offset() __always_inline")
  046c0dbe ("x86: Mark native_set_p4d() as __always_inline")

p4d_offset(), native_set_p4d() and native_p4d_clear() were marked
__always_inline in attempt to move __pgtable_l5_enabled into __initdata
section.

It was required as KASAN initialization code is a user of
USE_EARLY_PGTABLE_L5, so all pgtable_l5_enabled() translated to
__pgtable_l5_enabled there. This includes pgtable_l5_enabled() called
from inline p4d helpers.

If compiler would decided to not inline these p4d helpers, but leave
them standalone, we end up with section mismatch.

We don't need __always_inline here anymore. __pgtable_l5_enabled moved
back to be __ro_after_init. See the following commit:

  51be1335 ("Revert "x86/mm: Mark __pgtable_l5_enabled __initdata"")
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180626100341.49910-1-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When the P4D page table layer is folded at runtime, the p4d_free()
should do nothing, the same as in <asm-generic/pgtable-nop4d.h>.

It seems this bug should cause double-free in efi_call_phys_epilog(),
but I don't know how to trigger that code path, so I can't confirm that
by testing.
Signed-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org # 4.17
Fixes: 98219dda ("x86/mm: Fold p4d page table layer at runtime")
Link: http://lkml.kernel.org/r/20180625102427.15015-1-aryabinin@virtuozzo.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch extends the checks done prior to a nested VM entry.
Specifically, it extends the check_vmentry_prereqs function with checks
for fields relevant to the VM-entry event injection information, as
described in the Intel SDM, volume 3.

This patch is motivated by a syzkaller bug, where a bad VM-entry
interruption information field is generated in the VMCS02, which causes
the nested VM launch to fail. Then, KVM fails to resume L1.

While KVM should be improved to correctly resume L1 execution after a
failed nested launch, this change is justified because the existing code
to resume L1 is flaky/ad-hoc and the test coverage for resuming L1 is
sparse.
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NMarc Orr <marcorr@google.com>
[Removed comment whose parts were describing previous revisions and the
 rest was obvious from function/variable naming. - Radim]
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Mark Rutland noticed that GCC optimization passes have the potential to elide
necessary invocations of the array_index_mask_nospec() instruction sequence,
so mark the asm() volatile.

Mark explains:

"The volatile will inhibit *some* cases where the compiler could lift the
 array_index_nospec() call out of a branch, e.g. where there are multiple
 invocations of array_index_nospec() with the same arguments:

        if (idx < foo) {
                idx1 = array_idx_nospec(idx, foo)
                do_something(idx1);
        }

        < some other code >

        if (idx < foo) {
                idx2 = array_idx_nospec(idx, foo);
                do_something_else(idx2);
        }

 ... since the compiler can determine that the two invocations yield the same
 result, and reuse the first result (likely the same register as idx was in
 originally) for the second branch, effectively re-writing the above as:

        if (idx < foo) {
                idx = array_idx_nospec(idx, foo);
                do_something(idx);
        }

        < some other code >

        if (idx < foo) {
                do_something_else(idx);
        }

 ... if we don't take the first branch, then speculatively take the second, we
 lose the nospec protection.

 There's more info on volatile asm in the GCC docs:

   https://gcc.gnu.org/onlinedocs/gcc/Extended-Asm.html#Volatile
 "
Reported-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: babdde26 ("x86: Implement array_index_mask_nospec")
Link: https://lkml.kernel.org/lkml/152838798950.14521.4893346294059739135.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The changes to automatically test for working stack protector compiler
support in the Kconfig files removed the special STACKPROTECTOR_AUTO
option that picked the strongest stack protector that the compiler
supported.

That was all a nice cleanup - it makes no sense to have the AUTO case
now that the Kconfig phase can just determine the compiler support
directly.

HOWEVER.

It also meant that doing "make oldconfig" would now _disable_ the strong
stackprotector if you had AUTO enabled, because in a legacy config file,
the sane stack protector configuration would look like

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  # CONFIG_CC_STACKPROTECTOR_NONE is not set
  # CONFIG_CC_STACKPROTECTOR_REGULAR is not set
  # CONFIG_CC_STACKPROTECTOR_STRONG is not set
  CONFIG_CC_STACKPROTECTOR_AUTO=y

and when you ran this through "make oldconfig" with the Kbuild changes,
it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had
been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just
CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version
used to be disabled (because it was really enabled by AUTO), and would
disable it in the new config, resulting in:

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
  CONFIG_CC_STACKPROTECTOR=y
  # CONFIG_CC_STACKPROTECTOR_STRONG is not set
  CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

That's dangerously subtle - people could suddenly find themselves with
the weaker stack protector setup without even realizing.

The solution here is to just rename not just the old RECULAR stack
protector option, but also the strong one.  This does that by just
removing the CC_ prefix entirely for the user choices, because it really
is not about the compiler support (the compiler support now instead
automatially impacts _visibility_ of the options to users).

This results in "make oldconfig" actually asking the user for their
choice, so that we don't have any silent subtle security model changes.
The end result would generally look like this:

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
  CONFIG_STACKPROTECTOR=y
  CONFIG_STACKPROTECTOR_STRONG=y
  CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

where the "CC_" versions really are about internal compiler
infrastructure, not the user selections.
Acked-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The functions that were used in the emulation of fxrstor, fxsave, sgdt and
sidt were originally meant for task switching, and as such they did not
check privilege levels.  This is very bad when the same functions are used
in the emulation of unprivileged instructions.  This is CVE-2018-10853.

The obvious fix is to add a new argument to ops->read_std and ops->write_std,
which decides whether the access is a "system" access or should use the
processor's CPL.

Fixes: 129a72a0 ("KVM: x86: Introduce segmented_write_std", 2017-01-12)
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Currently the PTE special supports is turned on in per architecture
header files.  Most of the time, it is defined in
arch/*/include/asm/pgtable.h depending or not on some other per
architecture static definition.

This patch introduce a new configuration variable to manage this
directly in the Kconfig files.  It would later replace
__HAVE_ARCH_PTE_SPECIAL.

Here notes for some architecture where the definition of
__HAVE_ARCH_PTE_SPECIAL is not obvious:

arm
 __HAVE_ARCH_PTE_SPECIAL which is currently defined in
arch/arm/include/asm/pgtable-3level.h which is included by
arch/arm/include/asm/pgtable.h when CONFIG_ARM_LPAE is set.
So select ARCH_HAS_PTE_SPECIAL if ARM_LPAE.

powerpc
__HAVE_ARCH_PTE_SPECIAL is defined in 2 files:
 - arch/powerpc/include/asm/book3s/64/pgtable.h
 - arch/powerpc/include/asm/pte-common.h
The first one is included if (PPC_BOOK3S & PPC64) while the second is
included in all the other cases.
So select ARCH_HAS_PTE_SPECIAL all the time.

sparc:
__HAVE_ARCH_PTE_SPECIAL is defined if defined(__sparc__) &&
defined(__arch64__) which are defined through the compiler in
sparc/Makefile if !SPARC32 which I assume to be if SPARC64.
So select ARCH_HAS_PTE_SPECIAL if SPARC64

There is no functional change introduced by this patch.

Link: http://lkml.kernel.org/r/1523433816-14460-2-git-send-email-ldufour@linux.vnet.ibm.comSigned-off-by: NLaurent Dufour <ldufour@linux.vnet.ibm.com>
Suggested-by: NJerome Glisse <jglisse@redhat.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <albert@sifive.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Christophe LEROY <christophe.leroy@c-s.fr>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

apic_ack_edge() is explicitely for handling interrupt affinity cleanup when
interrupt remapping is not available or disable.

Remapped interrupts and also some of the platform specific special
interrupts, e.g. UV, invoke ack_APIC_irq() directly.

To address the issue of failing an affinity update with -EBUSY the delayed
affinity mechanism can be reused, but ack_APIC_irq() does not handle
that. Adding this to ack_APIC_irq() is not possible, because that function
is also used for exceptions and directly handled interrupts like IPIs.

Create a new function, which just contains the conditional invocation of
irq_move_irq() and the final ack_APIC_irq().

Reuse the new function in apic_ack_edge().

Preparatory change for the real fix.

Fixes: dccfe314 ("x86/vector: Simplify vector move cleanup")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NSong Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Link: https://lkml.kernel.org/r/20180604162224.471925894@linutronix.de

The AMD document outlining the SSBD handling
124441_AMD64_SpeculativeStoreBypassDisable_Whitepaper_final.pdf
mentions that if CPUID 8000_0008.EBX[24] is set we should be using
the SPEC_CTRL MSR (0x48) over the VIRT SPEC_CTRL MSR (0xC001_011f)
for speculative store bypass disable.

This in effect means we should clear the X86_FEATURE_VIRT_SSBD
flag so that we would prefer the SPEC_CTRL MSR.

See the document titled:
   124441_AMD64_SpeculativeStoreBypassDisable_Whitepaper_final.pdf

A copy of this document is available at
   https://bugzilla.kernel.org/show_bug.cgi?id=199889Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Cc: kvm@vger.kernel.org
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: andrew.cooper3@citrix.com
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20180601145921.9500-3-konrad.wilk@oracle.com

The AMD document outlining the SSBD handling
124441_AMD64_SpeculativeStoreBypassDisable_Whitepaper_final.pdf
mentions that the CPUID 8000_0008.EBX[26] will mean that the
speculative store bypass disable is no longer needed.

A copy of this document is available at:
    https://bugzilla.kernel.org/show_bug.cgi?id=199889Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Cc: kvm@vger.kernel.org
Cc: andrew.cooper3@citrix.com
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/20180601145921.9500-2-konrad.wilk@oracle.com

The vector_alloc tracepont reversed the reserved and ret aggs, that made
the trace print wrong. Exchange them.

Fixes: 8d1e3dca ("x86/vector: Add tracepoints for vector management")
Signed-off-by: NDou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: hpa@zytor.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180601065031.21872-1-douly.fnst@cn.fujitsu.com

AMD SME claims one bit from physical address to indicate whether the
page is encrypted or not. To achieve that we clear out the bit from
__PHYSICAL_MASK.

The capability to adjust __PHYSICAL_MASK is required beyond AMD SME.
For instance for upcoming Intel Multi-Key Total Memory Encryption.

Factor it out into a separate feature with own Kconfig handle.

It also helps with overhead of AMD SME. It saves more than 3k in .text
on defconfig + AMD_MEM_ENCRYPT:

	add/remove: 3/2 grow/shrink: 5/110 up/down: 189/-3753 (-3564)

We would need to return to this once we have infrastructure to patch
constants in code. That's good candidate for it.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NTom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180518113028.79825-1-kirill.shutemov@linux.intel.com

When CONFIG_OPTIMIZE_INLINING is enabled, the function native_set_p4d()
may not be fully inlined into the caller, resulting in a false-positive
warning about an access to the __pgtable_l5_enabled variable from a
non-__init function, despite the original caller being an __init function:

WARNING: vmlinux.o(.text.unlikely+0x1429): Section mismatch in reference from the function native_set_p4d() to the variable .init.data:__pgtable_l5_enabled
WARNING: vmlinux.o(.text.unlikely+0x1429): Section mismatch in reference from the function native_p4d_clear() to the variable .init.data:__pgtable_l5_enabled

The function native_set_p4d() references the variable __initdata
__pgtable_l5_enabled.  This is often because native_set_p4d lacks a
__initdata annotation or the annotation of __pgtable_l5_enabled is wrong.

Marking the native_set_p4d function and its caller native_p4d_clear()
avoids this problem.

I did not bisect the original cause, but I assume this is related to the
recent rework that turned pgtable_l5_enabled() into an inline function,
which in turn caused the compiler to make different inlining decisions.

Fixes: ad3fe525 ("x86/mm: Unify pgtable_l5_enabled usage in early boot code")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Link: https://lkml.kernel.org/r/20180605113715.1133726-1-arnd@arndb.de

According to the Intel Software Developers' Manual, Vol. 4, Order No.
335592, these macros have been reversed since they were added in the
initial turbostat commit. The reversed definitions were presumably
copied from turbostat.c to this file.

Fixes: 9c63a650 ("tools/power/x86/turbostat: share kernel MSR #defines")
Signed-off-by: NMatt Turner <mattst88@gmail.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Instead of globally disabling > 32bit DMA using the arch_dma_supported
hook walk the PCI bus under the actually affected bridge and mark every
device with the dma_32bit_limit flag.  This also gets rid of the
arch_dma_supported hook entirely.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

Implement HvFlushVirtualAddress{List,Space} hypercalls in a simplistic way:
do full TLB flush with KVM_REQ_TLB_FLUSH and kick vCPUs which are currently
IN_GUEST_MODE.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Hyper-V TLB flush hypercalls definitions will be required for KVM so move
them hyperv-tlfs.h. Structures also need to be renamed as '_pcpu' suffix is
irrelevant for a general-purpose definition.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Signed-off-by: NHuaisheng Ye <yehs1@lenovo.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Changing the VMCS12 layout will break save/restore compatibility with
older kvm releases once the KVM_{GET,SET}_NESTED_STATE ioctls are
accepted upstream. Google has already been using these ioctls for some
time, and we implore the community not to disturb the existing layout.

Move the four most recently added fields to preserve the offsets of
the previously defined fields and reserve locations for the vmread and
vmwrite bitmaps, which will be used in the virtualization of VMCS
shadowing (to improve the performance of double-nesting).
Signed-off-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[Kept the SDM order in vmcs_field_to_offset_table. - Radim]
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Given the fact that the ACPI "EINJ" (error injection) facility is not
universally available, implement software infrastructure to validate the
memcpy_mcsafe() exception handling implementation.

For each potential read exception point in memcpy_mcsafe(), inject a
emulated exception point at the address identified by 'mcsafe_inject'
variable. With this infrastructure implement a test to validate that the
'bytes remaining' calculation is correct for a range of various source
buffer alignments.

This code is compiled out by default. The CONFIG_MCSAFE_DEBUG
configuration symbol needs to be manually enabled by editing
Kconfig.debug. I.e. this functionality can not be accidentally enabled
by a user / distro, it's only for development.

Cc: <x86@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

The Hyper-V APIC code is built when CONFIG_HYPERV is enabled but the actual
code in that file is guarded with CONFIG_X86_64. There is no point in doing
this. Neither is there a point in having the CONFIG_HYPERV guard in there
because the containing directory is not built when CONFIG_HYPERV=n.

Further for the hv_init_apic() function a stub is provided only for
CONFIG_HYPERV=n, which is pointless as the callsite is not compiled at
all. But for X86_32 the stub is missing and the build fails.

Clean that up:

  - Compile hv_apic.c only when CONFIG_X86_64=y
  - Make the stub for hv_init_apic() available when CONFG_X86_64=n

Fixes: 6b48cb5f ("X86/Hyper-V: Enlighten APIC access")
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Michael Kelley <mikelley@microsoft.com>

The x86 platform operations are fairly isolated, so it's easy to change
them from using timespec to timespec64. It has been checked that all the
users and callers are safe, and there is only one critical function that is
broken beyond 2106:

  pvclock_read_wallclock() uses a 32-bit number of seconds since the epoch
  to communicate the boot time between host and guest in a virtual
  environment. This will work until 2106, but fixing this is outside the
  scope of this change, Add a comment at least.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: NRadim Krčmář <rkrcmar@redhat.com>
Acked-by: NJan Kiszka <jan.kiszka@siemens.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: jailhouse-dev@googlegroups.com
Cc: Borislav Petkov <bp@suse.de>
Cc: kvm@vger.kernel.org
Cc: y2038@lists.linaro.org
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: xen-devel@lists.xenproject.org
Cc: John Stultz <john.stultz@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Link: https://lkml.kernel.org/r/20180427201435.3194219-1-arnd@arndb.de

Consolidate the allocation of the hypercall input page.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NMichael Kelley <mikelley@microsoft.com>
Cc: olaf@aepfle.de
Cc: sthemmin@microsoft.com
Cc: gregkh@linuxfoundation.org
Cc: jasowang@redhat.com
Cc: Michael.H.Kelley@microsoft.com
Cc: hpa@zytor.com
Cc: apw@canonical.com
Cc: devel@linuxdriverproject.org
Cc: vkuznets@redhat.com
Link: https://lkml.kernel.org/r/20180516215334.6547-5-kys@linuxonhyperv.com

Support enhanced IPI enlightenments (to target more than 64 CPUs).
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NMichael Kelley <mikelley@microsoft.com>
Cc: olaf@aepfle.de
Cc: sthemmin@microsoft.com
Cc: gregkh@linuxfoundation.org
Cc: jasowang@redhat.com
Cc: Michael.H.Kelley@microsoft.com
Cc: hpa@zytor.com
Cc: apw@canonical.com
Cc: devel@linuxdriverproject.org
Cc: vkuznets@redhat.com
Link: https://lkml.kernel.org/r/20180516215334.6547-3-kys@linuxonhyperv.com

Hyper-V supports hypercalls to implement IPI; use them.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NMichael Kelley <mikelley@microsoft.com>
Cc: olaf@aepfle.de
Cc: sthemmin@microsoft.com
Cc: gregkh@linuxfoundation.org
Cc: jasowang@redhat.com
Cc: Michael.H.Kelley@microsoft.com
Cc: hpa@zytor.com
Cc: apw@canonical.com
Cc: devel@linuxdriverproject.org
Cc: vkuznets@redhat.com
Link: https://lkml.kernel.org/r/20180516215334.6547-2-kys@linuxonhyperv.com

Hyper-V supports MSR based APIC access; implement
the enlightenment.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NMichael Kelley <mikelley@microsoft.com>
Cc: olaf@aepfle.de
Cc: sthemmin@microsoft.com
Cc: gregkh@linuxfoundation.org
Cc: jasowang@redhat.com
Cc: Michael.H.Kelley@microsoft.com
Cc: hpa@zytor.com
Cc: apw@canonical.com
Cc: devel@linuxdriverproject.org
Cc: vkuznets@redhat.com
Link: https://lkml.kernel.org/r/20180516215334.6547-1-kys@linuxonhyperv.com

__pgtable_l5_enabled shouldn't be needed after system has booted, we can
mark it as __initdata, but it requires preparation.

KASAN initialization code is a user of USE_EARLY_PGTABLE_L5, so all
pgtable_l5_enabled() translated to __pgtable_l5_enabled there, including
the one in p4d_offset().

It may lead to section mismatch, if a compiler would not inline
p4d_offset(), but leave it as a standalone function: p4d_offset() is not
marked as __init.

Marking p4d_offset() as __always_inline fixes the issue.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180518103528.59260-7-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

pgtable_l5_enabled is defined using cpu_feature_enabled() but we refer
to it as a variable. This is misleading.

Make pgtable_l5_enabled() a function.

We cannot literally define it as a function due to circular dependencies
between header files. Function-alike macros is close enough.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180518103528.59260-4-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Usually pgtable_l5_enabled is defined using cpu_feature_enabled().
cpu_feature_enabled() is not available in early boot code. We use
several different preprocessor tricks to get around it. It's messy.

Unify them all.

If cpu_feature_enabled() is not yet available, USE_EARLY_PGTABLE_L5 can
be defined before all includes. It makes pgtable_l5_enabled rely on
__pgtable_l5_enabled variable instead. This approach fits all early
users.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180518103528.59260-3-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The "336996 Speculative Execution Side Channel Mitigations" from
May defines this as SSB_NO, hence lets sync-up.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Since non atomic readq() and writeq() were added some of the drivers
would like to use it in a manner of:

 #include <io-64-nonatomic-lo-hi.h>
 ...
 pr_debug("Debug value of some register: %016llx\n", readq(addr));

However, lo_hi_readq() always returns __u64 data, while readq()
on x86_64 defines it as unsigned long. and thus compiler warns
about type mismatch, although they are both 64-bit on x86_64.

Convert readq() and writeq() on x86 to operate on deterministic
64-bit type. The most of architectures in the kernel already are using
either unsigned long long, or u64 type for readq() / writeq().
This change propagates consistency in that sense.

While this is not an issue per se, though if someone wants to address it,
the anchor could be the commit:

  797a796a ("asm-generic: architecture independent readq/writeq for 32bit environment")

where non-atomic variants had been introduced.

Note, there are only few users of above pattern and they will not be
affected because they do cast returned value. The actual warning has
been issued on not-yet-upstreamed code.

Potentially we might get a new warnings if some 64-bit only code
assigns returned value to unsigned long type of variable. This is
assumed to be addressed on case-by-case basis.
Reported-by: Nlkp <lkp@intel.com>
Tested-by: NSohil Mehta <sohil.mehta@intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180515115211.55050-1-andriy.shevchenko@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

KVM_HINTS_DEDICATED seems to be somewhat confusing:

Guest doesn't really care whether it's the only task running on a host
CPU as long as it's not preempted.

And there are more reasons for Guest to be preempted than host CPU
sharing, for example, with memory overcommit it can get preempted on a
memory access, post copy migration can cause preemption, etc.

Let's call it KVM_HINTS_REALTIME which seems to better
match what guests expect.

Also, the flag most be set on all vCPUs - current guests assume this.
Note so in the documentation.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Expose the new virtualized architectural mechanism, VIRT_SSBD, for using
speculative store bypass disable (SSBD) under SVM.  This will allow guests
to use SSBD on hardware that uses non-architectural mechanisms for enabling
SSBD.

[ tglx: Folded the migration fixup from Paolo Bonzini ]
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>