Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NET]: dev.c comment fixes
  [IPV6] ROUTE: Don't try less preferred routes for on-link routes.
  [IRDA]: *_DONGLE should depend on IRTTY_SIR
  [MAINTAINERS]: Add entry for netem

Noticed that dev_alloc_name() comment was incorrect, and more spellung
errors.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In addition to the real on-link routes, NONEXTHOP routes
should be considered on-link.

Problem reported by Meelis Roos <mroos@linux.ee>.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: NMeelis Roos <mroos@linux.ee>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix section mismatch warnings:
WARNING: drivers/net/wireless/arlan.o - Section mismatch: reference to
.init.text:arlan_probe from .text between 'init_module' (at offset
0x3526) and 'cleanup_module'
WARNING: drivers/net/wireless/arlan.o - Section mismatch: reference to
.init.text:init_arlan_proc from .text between 'init_module' (at offset
0x3539) and 'cleanup_module'
WARNING: drivers/net/wireless/arlan.o - Section mismatch: reference to
.exit.text:cleanup_arlan_proc from .text between 'cleanup_module' (at
offset 0x356c) and 'arlan_diagnostic_info_string'
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Fix section mismatch warning:
WARNING: drivers/net/wireless/wavelan.o - Section mismatch: reference to
.init.text: from .text between 'init_module' (at offset 0x371e) and
'cleanup_module'
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The TPM chip on the ThinkPad T60 and Z60 machines is returning 0xFFFF for
the vendor ID which is a check the driver made to double check it was
actually talking to the memory mapped space of a TPM.  This patch removes
the check since it isn't absolutely necessary and was causing device
discovery to fail on these machines.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

WARNING: drivers/i2c/busses/scx200_acb.o - Section mismatch: reference to
.init.text: from .text after 'scx200_add_cs553x' (at offset 0x528)
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix compile bug with the S3C24XX SPI driver when CONFIG_PM is set.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

For a very long time, echoing 'standby' or 'mem' into /sys/power/state has
killed the machine on powerpc.  This patch fixes that.

This patch adds the .valid callback to pm_ops on PowerMac so that only the
suspend to disk state can be entered.  Note that just returning 0 would
suffice since the upper layers don't pass PM_SUSPEND_DISK down, but we
handle it there regardless just in case that changes.
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If affs_bread() fails, the exit path calls mark_buffer_dirty_inode() with a
NULL argument.

Coverity CID: 312.
Signed-off-by: NFlorin Malita <fmalita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This improves accuracy of the touchscreen and hwmon sensor readings,
addressing an issue noted by Imre Deak: there's an extra bit written before
the sample (12 bits) gets written out.

It also catches up to various comments, and makes the /proc/interrupts
entry sensible again.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Imre Deak <imre.deak@nokia.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Dmitry Torokhov <dtor_core@ameritech.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some driver wants to use CMSPAR, but it was missing on alpha and powerpc.
This adds it, with the same value as every other architecture uses.

(akpm: fixes the build of an upcoming gregkh USB patch)
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

otherwise we get nasty messages about locks not being released.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mthca: Fix posting lists of 256 receive requests to SRQ for Tavor

If a SIR dongle is built in the kernel while IRTTY_SIR is built
as a module, kernel compilation will fail.
Thus, the SIR dongle config should depend on the IRTTY_SIR.

Closes kernel bug# 6512
(http://bugzilla.kernel.org/show_bug.cgi?id=6512)
Signed-off-by: NSamuel Ortiz <samuel@sortiz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It gets enough reports, that there ought to be a MAINTAINER entry.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add missing parentheses for type cast to u64.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Mixing "depends on I2C" and "select I2C" within the media subsystem
leads to the following problem:
Warning! Found recursive dependency: I2C DVB_BUDGET DVB_BUDGET_PATCH
DVB_AV7110 VIDEO_SAA7146_VV VIDEO_SAA7146 I2C
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NManu Abraham <manu@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If we post a list of length exactly a multiple of 256, nreq in
doorbell gets set to 256 which is wrong: it should be encoded by 0.
This is because we only zero it out on the next WR, which may not be
there.  The solution is to ring the doorbell after posting a WQE, not
before posting the next one.

This is the same bug that we just fixed for QPs with non-shared RQ.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ipath: deref correct pointer when using kernel SMA
  IB/ipath: fix null deref during rdma ops
  IB/ipath: register as IB device owner
  IB/ipath: enable PE800 receive interrupts on user ports
  IB/ipath: enable GPIO interrupt on HT-460
  IB/ipath: fix NULL dereference during cleanup
  IB/ipath: replace uses of LIST_POISON
  IB/ipath: fix reporting of driver version to userspace
  IB/ipath: don't modify QP if changes fail
  IB/ipath: fix spinlock recursion bug

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  JFS: Fix multiple errors in metapage_releasepage

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] libata: add pio flush for via atapi (was: Re: TR: ASUS A8V Deluxe, x86_64)

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  [PATCH] sky2: fix jumbo packet support

md->disk was being used in a debug message before it was allocated.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It looks like metapage_releasepage was making in invalid assumption that
the releasepage method would not be called on a dirty page.  Instead of
issuing a warning and releasing the metapage, it should return 0, indicating
that the private data for the page cannot be released.

I also realized that metapage_releasepage had the return code all wrong.  If
it is successful in releasing the private data, it should return 1, otherwise
it needs to return 0.

Lastly, there is no need to call wait_on_page_writeback, since
try_to_release_page will not call us with a page in writback state.
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>

Backport the "pio flush" from the libata major update to 2.6.17 for via atapi.
Signed-off-by: NAlbert Lee <albertcc@tw.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The truncate threshold calculation to prevent receiver from getting stuck
was incorrect, and it didn't take into account the upper limit on bits
in the register so the jumbo packet support was broken.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Bridge will OOPS on removal if other application has the SAP open.
The bridge SAP might be shared with other usages, so need
to do reference counting on module removal rather than explicit
close/delete.

Since packet might arrive after or during removal, need to clear
the receive function handle, so LLC only hands it to user (if any).
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If kmalloc fails, error path leaks data allocated from asn1_oid_decode().
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When parsing unknown sequence extensions the "son"-pointer points behind
the last known extension for this type, don't try to interpret it.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The condition "> H323_ERROR_STOP" can never be true since H323_ERROR_STOP
is positive and is the highest possible return code, while real errors are
negative, fix the checks. Also only abort on real errors in some spots
that were just interpreting any return value != 0 as error.

Fixes crashes caused by use of stale data after a parsing error occured:

BUG: unable to handle kernel paging request at virtual address bfffffff
 printing eip:
c01aa0f8
*pde = 1a801067
*pte = 00000000
Oops: 0000 [#1]
PREEMPT
Modules linked in: ip_nat_h323 ip_conntrack_h323 nfsd exportfs sch_sfq sch_red cls_fw sch_hfsc  xt_length ipt_owner xt_MARK iptable_mangle nfs lockd sunrpc pppoe pppoxx
CPU:    0
EIP:    0060:[<c01aa0f8>]    Not tainted VLI
EFLAGS: 00210646   (2.6.17-rc4 #8)
EIP is at memmove+0x19/0x22
eax: d77264e9   ebx: d77264e9   ecx: e88d9b17   edx: d77264e9
esi: bfffffff   edi: bfffffff   ebp: de6a7680   esp: c0349db8
ds: 007b   es: 007b   ss: 0068
Process asterisk (pid: 3765, threadinfo=c0349000 task=da068540)
Stack: <0>00000006 c0349e5e d77264e3 e09a2b4e e09a38a0 d7726052 d7726124 00000491
       00000006 00000006 00000006 00000491 de6a7680 d772601e d7726032 c0349f74
       e09a2dc2 00000006 c0349e5e 00000006 00000000 d76dda28 00000491 c0349f74
Call Trace:
 [<e09a2b4e>] mangle_contents+0x62/0xfe [ip_nat]
 [<e09a2dc2>] ip_nat_mangle_tcp_packet+0xa1/0x191 [ip_nat]
 [<e0a2712d>] set_addr+0x74/0x14c [ip_nat_h323]
 [<e0ad531e>] process_setup+0x11b/0x29e [ip_conntrack_h323]
 [<e0ad534f>] process_setup+0x14c/0x29e [ip_conntrack_h323]
 [<e0ad57bd>] process_q931+0x3c/0x142 [ip_conntrack_h323]
 [<e0ad5dff>] q931_help+0xe0/0x144 [ip_conntrack_h323]
...

Found by the PROTOS c07-h2250v4 testsuite.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

At this point, the core QP structure hasn't been initialized, so what's
in there isn't valid.  Get the same information elsewhere.
Signed-off-by: NBryan O'Sullivan <bos@pathscale.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The problem was that node A's sending thread, which handles sending RDMA
read response data, would write the trigger word, the last packet would
be sent, node B would send a new RDMA read request, node A's interrupt
handler would initialize s_rdma_sge, then node A's sending thread would
update s_rdma_sge.  This didn't happen very often naturally but was more
frequent with 1 byte RDMA reads.  Rather than adding more locking or
increasing the QP structure size and copying sge data, I modified the
copy routine to update the pointers before writing the trigger word to
avoid the update race.
Signed-off-by: NRalph Campbell <ralphc@pathscale.com>
Signed-off-by: NBryan O'Sullivan <bos@pathscale.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This fixes an oops.
Signed-off-by: NBryan O'Sullivan <bos@pathscale.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Fixed so it works on the PE-800.  It had not previously been updated to
match PE-800 receive interrupt differences from HT-400.
Signed-off-by: NBryan O'Sullivan <bos@pathscale.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This is required for even semi-decent performance on OpenIB.
Signed-off-by: NBryan O'Sullivan <bos@pathscale.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Fix NULL deref due to pcidev being clobbered before dd->ipath_f_cleanup()
was called.
Signed-off-by: NBryan O'Sullivan <bos@pathscale.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>