- 21 10月, 2010 40 次提交
-
-
由 Martin Rubli 提交于
This patch removes the sysadmin requirements for UVCIOC_CTRL_MAP (and the stub implementation of UVCIOC_CTRL_ADD). This requirement no longer makes sense with the new XU control access mechanisms since XU controls can be accessed without adding control mappings first. A maximum number (currently 1024) of control mappings per device is enforced to avoid excess memory consumption caused by careless user space applications. Signed-off-by: NMartin Rubli <martin_rubli@logitech.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Devices advertise XU controls using a bitmask, in which each bit corresponds to a control. The control selector, used to query the control, isn't available in the USB descriptors. All known UVC devices use control selectors equal to the control bit index plus one. Hardcode that relationship in the driver, making the UVCIOC_CTRL_ADD ioctl obsolete. All necessary information about XU controls can be obtained by the driver at enumeration time. The UVCIOC_CTRL_ADD ioctl is still supported for compatibility reasons, but now always returns -EEXIST. Finally, control mappings are now on a per-device basis and no longer global. As this changes the userspace interface, bump the driver version number to 1.0.0 (it was about time). Signed-off-by: NMartin Rubli <martin_rubli@logitech.com> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Increase the sequence number of the v4l2_buffer structure regardless of any buffer states, so that discontinuous sequence numbers allow applications to detect lost video frames. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The bandwidth estimate computed with the FIX_BANDIWDTH quirk is too low for many cameras. Don't use maximum packet sizes lower than 1024 bytes to try and work around the problem. According to measurements done on two different camera models, the value is high enough to get most resolutions working while not preventing two simultaneous VGA streams at 15 fps. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Instead of printing the query hex value in error messages, print its name to make the messages more readable. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
They're not modified by the function, make them const. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The Hercules Dualpix Exchange (06f8:3005) camera expose an absolute zoom that is not implemented. Blacklist it. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Don't hold the lock before unregistering the device, since when the device is unregistered the datastruct containing the lock may be freed (if the refcount went to 0). Also fixed the framework documentation that erroneously suggested the wrong locking order as well. Reported-by: NDavid Ellingsworth <david@identd.dyndns.org> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Acked-by: NDavid Ellingsworth <david@identd.dyndns.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Use new RC core instead of old legacy RC implementation. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Button is PIP => KEY_NEW http://www.linuxtv.org/wiki/index.php/Remote_ControllersSigned-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Button is PIP => KEY_NEW http://www.linuxtv.org/wiki/index.php/Remote_Controllers Thanks to Cart. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Fix power button mappings as defined in http://www.linuxtv.org/wiki/index.php/Remote_ControllersSigned-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Rename remote controller driver I added earlier. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Imported from af9015.h. Initial keytable was from Jose Alberto Reguero <jareguero@telefonica.net> and Felipe Morales Moreno <felipe.morales.moreno@gmail.com> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Digittrade DVB-T USB Stick remote controller. Imported from af9015.h. Initial keytable was from Alain Kalker <miki@dds.nl> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Imported from af9015.h. Initial keytable was from Marc Schneider <macke@macke.org> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
MSI DIGIVOX mini III remote controller. Uses NEC extended 0x61d6. This remote seems to be same as rc-kworld-315u.c. Anyhow, add new remote since rc-kworld-315u.c lacks NEC extended address byte. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
TerraTec slim remote, 7 rows, 4 columns. Uses NEC extended 0x02bd. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Variable is don't care in that case. No need to set value. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Yann E. MORIN 提交于
The AVerTV Red HD+ (A850T) is basically the same as the existing AVerTV Volar Black HD (A850), but is specific to the french market. The A850T identifies itself as a A850, but has its own PID. It even suffers from the same EEPROM deficiencies. This is based off a collection of information gathered from the french support forums for Ubuntu, which I tried to properly format into this patch: http://forum.ubuntu-fr.org/viewtopic.php?pid=3322825Signed-off-by: N"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Demod + tuner specific RF AGC and IF AGC limit values are read from demod memory in every signal strength query. Cache those to reduce I2C traffic. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Precalculate coefficients register values. This reduces text size around 300 bytes. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
While here, documment that VBI may need changes, based on video STD, and do some cleanup at device init, to be sure that VBI init will happen all the times, and to remove a duplicated video standard call. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Dmitry Belimov 提交于
Rework audio. Add SECAM-DK, move SECAM to SECAM-B | SECAM-G. Add some new audio standards and tricks for future, see tm6000_set_audio_std. For SECAM-DK it works. Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
The better is to remove the audio init from tm6000-core and add a separate per-standard set of tables. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Those locking issues affect tvtime, causing a kernel oops/panic, due to a race condition. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Instead of doing its own lock, use core-assisted one. As a bonus, it will do the proper unlock during queue wait events. This fixes a long-standing bug where softwares like tvtime would hang if you try to use cx231xx-alsa. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
This file came originally from cx23885 driver. Some functions aren't used. Now that they are declared as static, we have those errors: drivers/media/video/cx231xx/cx231xx-417.c:615: warning: ‘mc417_gpio_set’ defined but not used drivers/media/video/cx231xx/cx231xx-417.c:625: warning: ‘mc417_gpio_clear’ defined but not used drivers/media/video/cx231xx/cx231xx-417.c:635: warning: ‘mc417_gpio_enable’ defined but not used As they're not used, just remove them. If needed, they can be restored from the git logs or from the cx23885 driver. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/video/cx23885/built-in.o: In function `mc417_memory_write': /home/v4l/v4l/patchwork/drivers/media/video/cx23885/cx23885-417.c:482: multiple definition of `mc417_memory_write' drivers/media/video/cx231xx/built-in.o:/home/v4l/v4l/patchwork/drivers/media/video/cx231xx/cx231xx-417.c:477: first defined here drivers/media/video/cx23885/built-in.o: In function `mc417_gpio_set': /home/v4l/v4l/patchwork/drivers/media/video/cx23885/cx23885-417.c:636: multiple definition of `mc417_gpio_set' drivers/media/video/cx231xx/built-in.o:/home/v4l/v4l/patchwork/drivers/media/video/cx231xx/cx231xx-417.c:615: first defined here drivers/media/video/cx23885/built-in.o: In function `mc417_gpio_enable': /home/v4l/v4l/patchwork/drivers/media/video/cx23885/cx23885-417.c:656: multiple definition of `mc417_gpio_enable' drivers/media/video/cx231xx/built-in.o:/home/v4l/v4l/patchwork/drivers/media/video/cx231xx/cx231xx-417.c:635: first defined here drivers/media/video/cx23885/built-in.o: In function `mc417_memory_read': /home/v4l/v4l/patchwork/drivers/media/video/cx23885/cx23885-417.c:546: multiple definition of `mc417_memory_read' drivers/media/video/cx231xx/built-in.o:/home/v4l/v4l/patchwork/drivers/media/video/cx231xx/cx231xx-417.c:541: first defined here drivers/media/video/cx23885/built-in.o: In function `mc417_gpio_clear': /home/v4l/v4l/patchwork/drivers/media/video/cx23885/cx23885-417.c:646: multiple definition of `mc417_gpio_clear' drivers/media/video/cx231xx/built-in.o:/home/v4l/v4l/patchwork/drivers/media/video/cx231xx/cx231xx-417.c:625: first defined here drivers/media/video/cx23885/built-in.o: In function `mc417_register_read': /home/v4l/v4l/patchwork/drivers/media/video/cx23885/cx23885-417.c:388: multiple definition of `mc417_register_read' drivers/media/video/cx231xx/built-in.o:/home/v4l/v4l/patchwork/drivers/media/video/cx231xx/cx231xx-417.c:401: first defined here drivers/media/video/cx23885/built-in.o: In function `mc417_register_write': /home/v4l/v4l/patchwork/drivers/media/video/cx23885/cx23885-417.c:324: multiple definition of `mc417_register_write' drivers/media/video/cx231xx/built-in.o:/home/v4l/v4l/patchwork/drivers/media/video/cx231xx/cx231xx-417.c:343: first defined here Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
gcc didn't like to have i++ inside a complex operation: drivers/media/video/cx231xx/cx231xx-417.c: In function ‘cx231xx_load_firmware’: drivers/media/video/cx231xx/cx231xx-417.c:1059: warning: operation on ‘i’ may be undefined drivers/media/video/cx231xx/cx231xx-417.c:1061: warning: operation on ‘i’ may be undefined drivers/media/video/cx231xx/cx231xx-417.c:1063: warning: operation on ‘i’ may be undefined Btw, I agree with gcc, as we're using i and i++ at the same operation and, depending on how optimization may occur, it may produce a wrong code. While here, fix CodingStyle issues on the changed code. Acked-by: NSri Deevi <Srinivasa.Deevi@conexant.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
The patches received from the vendor contained a lot of CodingStyle issues. Cleans the style issues reported by checkpatch.pl on those drivers. It is better to do such style fixes when merging a big set of changes than latter. Of course, the better is to receive patches already cleaned ;) Acked-by: NSri Deevi <Srinivasa.Deevi@conexant.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Acked-by: NSri Deevi <Srinivasa.Deevi@conexant.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-