- 20 4月, 2005 4 次提交
-
-
由 Hugh Dickins 提交于
ia64 and sparc64 hurriedly had to introduce their own variants of pgd_addr_end, to leapfrog over the holes in their virtual address spaces which the final clear_page_range suddenly presented when converted from pgd_index to pgd_addr_end. But now that free_pgtables respects the vma list, those holes are never presented, and the arch variants can go. Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hugh Dickins 提交于
ia64 and ppc64 had hugetlb_free_pgtables functions which were no longer being called, and it wasn't obvious what to do about them. The ppc64 case turns out to be easy: the associated tables are noted elsewhere and freed later, safe to either skip its hugetlb areas or go through the motions of freeing nothing. Since ia64 does need a special case, restore to ppc64 the special case of skipping them. The ia64 hugetlb case has been broken since pgd_addr_end went in, though it probably appeared to work okay if you just had one such area; in fact it's been broken much longer if you consider a long munmap spanning from another region into the hugetlb region. In the ia64 hugetlb region, more virtual address bits are available than in the other regions, yet the page tables are structured the same way: the page at the bottom is larger. Here we need to scale down each addr before passing it to the standard free_pgd_range. Was about to write a hugely_scaled_down macro, but found htlbpage_to_page already exists for just this purpose. Fixed off-by-one in ia64 is_hugepage_only_range. Uninline free_pgd_range to make it available to ia64. Make sure the vma-gathering loop in free_pgtables cannot join a hugepage_only_range to any other (safe to join huges? probably but don't bother). Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hugh Dickins 提交于
There's only one usage of MM_VM_SIZE(mm) left, and it's a troublesome macro because mm doesn't contain the (32-bit emulation?) info needed. But it too is only needed because we ignore the end from the vma list. We could make flush_pgtables return that end, or unmap_vmas. Choose the latter, since it's a natural fit with unmap_mapping_range_vma needing to know its restart addr. This does make more than minimal change, but if unmap_vmas had returned the end before, this is how we'd have done it, rather than storing the break_addr in zap_details. unmap_vmas used to return count of vmas scanned, but that's just debug which hasn't been useful in a while; and if we want the map_count 0 on exit check back, it can easily come from the final remove_vm_struct loop. Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hugh Dickins 提交于
Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 19 4月, 2005 11 次提交
-
-
由 Michal Ostrowski 提交于
- Fix prototypes for debugfs functions (in configurations where debugfs is disabled). Signed-off-by: NMichal Ostrowski <mostrows@speakeasy.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Roland Dreier 提交于
The current <linux/debugfs.h> include file is a little fragile in that it is not self-contained and hence may cause compile warnings or errors depending on the files included before it, the kernel config and the architecture. This patch makes things a little more robust by: - including <linux/types.h> to get definitions of u32, mode_t, and so on. - forward declaring struct file_operations. - including <linux/err.h> when CONFIG_DEBUG_FS is not set The last change is particularly useful, as a kernel developer is likely to build with debugfs always enabled and never see the build breakage cased if debugfs is disabled. Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kay Sievers 提交于
sysfs: allow changing the permissions for already created attributes Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This is the first of a few installments of PM API updates to match the recent switch to "pm_message_t". This installment primarily affects USB device drivers (for USB interfaces), and it changes the handful of drivers which currently implement suspend methods: - <linux/usb.h> and usbcore, signature change - Some drivers only changed the signature, net effect this just shuts up "sparse -Wbitwise": * hid-core * stir4200 - Two network drivers did that, and also grew slightly more featureful suspend code ... they now properly shut down their activities. (As should stir4200...) * pegasus * usbnet Note that the Wake-On-Lan (WOL) support in pegasus doesn't yet work; looks to me like it's missing a request to turn it on, vs just configuring it. The ASIX code in usbnet also has WOL hooks that are ready to use; untested. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/net/irda/stir4200.c ===================================================================
-
由 akpm@osdl.org 提交于
With older gcc's: In file included from drivers/usb/class/cdc-acm.c:63: include/linux/usb_cdc.h:117: field `bDetailData' has incomplete type Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> diff -puN include/linux/usb_cdc.h~usb_cdc-build-fix include/linux/usb_cdc.h
-
由 David S. Miller 提交于
Like Alpha, sparc64's struct stat was defined before we had the nanosecond et al. fields added. So like Alpha I have to cons up a struct stat64 to get this stuff. I'll work on the glibc bits soon. Also, we were forgetting to fill in the nanosecond fields in the sparc compat stat64 syscalls. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
This patch removes volatile qualifier from scsi_device->device_busy, Scsi_Host->host_busy and ->host_failed as the volatile qualifiers don't serve any purpose now. While at it, convert those fields from unsigned short to unsigned int as suggested by Christoph. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
We have a DID_IMM_RETRY to require a retry at once, but we could do with a DID_REQUEUE to instruct the mid-layer to treat this command in the same manner as QUEUE_FULL or BUSY (i.e. halt the submission until another command returns ... or the queue pressure builds if there are no outstanding commands). Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
scsi_cmnd->serial_number_at_timeout doesn't serve any purpose anymore. All serial_number == serial_number_at_timeout tests are always true in abort callbacks. Kill the field. Also, as ->pid always equals ->serial_number and ->serial_number doesn't have any special meaning anymore, update comments above ->serial_number accordingly. Once we remove all uses of this field from all lldd's, this field should go. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
scsi_cmnd->internal_timeout field doesn't have any meaning anymore. Kill the field. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
Adapted from a patch in SuSE's kernel SRPM. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 18 4月, 2005 1 次提交
-
-
由 David S. Miller 提交于
We were flushing the D-cache excessively for ptrace() processing and this makes debugging threads so slow as to be totally unusable. All process page accesses via ptrace() go via access_process_vm(). This routine, for each process page, uses get_user_pages(). That in turn does a flush_dcache_page() on the child pages before we copy in/out the ptrace request data. Therefore, all we need to do after the data movement is: 1) Flush the D-cache pages if the kernel maps the page to a different color than userspace does. 2) If we wrote to the page, we need to flush the I-cache on older cpus. Previously we just flushed the entire cache at the end of a ptrace() request, and that was beyond stupid. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 24 次提交
-
-
由 Russell King 提交于
Fix debug EBSA285 and RiscPC debugging macros to detect whether the MMU is enabled. Signed-off-by: NRussell King <rmk@arm.linux.org.uk>
-
由 Russell King 提交于
Fix show_regs() to provide a backtrace. Provide a new __show_regs() function which implements the common subset of show_regs() and die(). Add prototypes to asm-arm/system.h Signed-off-by: NRussell King <rmk@arm.linux.org.uk>
-
We have a DID_IMM_RETRY to require a retry at once, but we could do with a DID_REQUEUE to instruct the mid-layer to treat this command in the same manner as QUEUE_FULL or BUSY (i.e. halt the submission until another command returns ... or the queue pressure builds if there are no outstanding commands). Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
scsi_cmnd->serial_number_at_timeout doesn't serve any purpose anymore. All serial_number == serial_number_at_timeout tests are always true in abort callbacks. Kill the field. Also, as ->pid always equals ->serial_number and ->serial_number doesn't have any special meaning anymore, update comments above ->serial_number accordingly. Once we remove all uses of this field from all lldd's, this field should go. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
scsi_cmnd->internal_timeout field doesn't have any meaning anymore. Kill the field. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
Adapted from a patch in SuSE's kernel SRPM. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- add a comment to the device structure that the device_busy field is now protected by the request_queue->queue_lock - null out sdev->request_queue after the queue is released to trap any (and there shouldn't be any) use after the queue is freed. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
The current problem seen is that the queue lock is actually in the SCSI device structure, so when that structure is freed on device release, we go boom if the queue tries to access the lock again. The fix here is to move the lock from the scsi_device to the queue. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Coywolf Qi Hunt 提交于
This patch hides reparent_to_init(). reparent_to_init() should only be called by daemonize(). Signed-off-by: NCoywolf Qi Hunt <coywolf@lovecn.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benoit Boissinot 提交于
gcc-4 warns with include/linux/cpuset.h:21: warning: type qualifiers ignored on function return type cpuset_cpus_allowed is declared with const extern const cpumask_t cpuset_cpus_allowed(const struct task_struct *p); First const should be __attribute__((const)), but the gcc manual explains that: "Note that a function that has pointer arguments and examines the data pointed to must not be declared const. Likewise, a function that calls a non-const function usually must not be const. It does not make sense for a const function to return void." The following patch remove const from the function declaration. Signed-off-by: NBenoit Boissinot <benoit.boissinot@ens-lyon.org> Acked-by: NPaul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 James Bottomley 提交于
In the new io infrastructure, all of our operators are expecting the underlying device to be little endian (because the PCI bus, their main consumer, is LE). However, there are a fair few devices and busses in the world that are actually Big Endian. There's even evidence that some of these BE bus and chip types are attached to LE systems. Thus, there's a need for a BE equivalent of our io{read,write}{16,32} operations. The attached patch adds this as io{read,write}{16,32}be. When it's in, I'll add the first consume (the 53c700 SCSI chip driver). Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul E. McKenney 提交于
The hlist_for_each_entry_rcu() comment block refers to a nonexistent hlist_add_rcu() API, needs to change to hlist_add_head_rcu(). Signed-off-by: NPaul E. McKenney <paulmck@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Hellwig 提交于
These have been deprecated since ->compat_ioctl when in, thus only a short deprecation period. There's four users left: i2o_config, s390/z90crypy, s390/dasd and s390/zfcp and for the first two patches are about to be submitted to get rid of it. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pavel Machek 提交于
This fixes u32 vs. pm_message_t confusion in remaining places. Fortunately there's few of them. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pavel Machek 提交于
This fixes pm_message_t vs. u32 confusion in ppc and aty (I *hope* that's basically radeon code...). I was not able to test most of these, but I'm not really changing anything, so it should be okay. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pavel Machek 提交于
This fixes drivers/pci (mostly pcie stuff). Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pavel Machek 提交于
I thought I'm done with fixing u32 vs. pm_message_t ... unfortunately that turned out not to be the case as Russel King pointed out. Here are fixes for Documentation and common code (mainly system devices). Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Yoshinori Sato 提交于
- page.h: fix build error - unistd.h: _syscall macro cleanup. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
This will allow hotplug CPU in the future and in general cleans up a lot of crufty code. It also should plug some races that the old hackish way introduces. Remove one old race workaround in NMI watchdog setup that is not needed anymore. I removed the old total sum of bogomips reporting code. The brag value of BogoMips has been greatly devalued in the last years on the open market. Real CPU hotplug will need some more work, but the infrastructure for it is there now. One drawback: the new TSC sync algorithm is less accurate than before. The old way of zeroing TSCs is too intrusive to do later. Instead the TSC of the BP is duplicated now, which is less accurate. akpm: - sync_tsc_bp_init seems to have the sense of `init' inverted. - SPIN_LOCK_UNLOCKED is deprecated - use DEFINE_SPINLOCK. Cc: <rusty@rustcorp.com.au> Cc: <mingo@elte.hu> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
It was confusingly named. Signed-off-by: NAndi Kleen <ak@suse.de> DESC x86_64: Switch SMP bootup over to new CPU hotplug state machine EDESC From: "Andi Kleen" <ak@suse.de> This will allow hotplug CPU in the future and in general cleans up a lot of crufty code. It also should plug some races that the old hackish way introduces. Remove one old race workaround in NMI watchdog setup that is not needed anymore. I removed the old total sum of bogomips reporting code. The brag value of BogoMips has been greatly devalued in the last years on the open market. Real CPU hotplug will need some more work, but the infrastructure for it is there now. One drawback: the new TSC sync algorithm is less accurate than before. The old way of zeroing TSCs is too intrusive to do later. Instead the TSC of the BP is duplicated now, which is less accurate. Cc: <rusty@rustcorp.com.au> Cc: <mingo@elte.hu> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Appended patch adds the support for Intel dual-core detection and displaying the core related information in /proc/cpuinfo. It adds two new fields "core id" and "cpu cores" to x86 /proc/cpuinfo and the "core id" field for x86_64("cpu cores" field is already present in x86_64). Number of processor cores in a die is detected using cpuid(4) and this is documented in IA-32 Intel Architecture Software Developer's Manual (vol 2a) (http://developer.intel.com/design/pentium4/manuals/index_new.htm#sdm_vol2a) This patch also adds cpu_core_map similar to cpu_sibling_map. Slightly hacked by AK. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Calling a notifier three times in the debug handler does not make much sense, because a debugger can figure out the various conditions by itself. Remove the additional calls to DIE_DEBUG and DIE_DEBUGSTEP completely. This matches what i386 does now. This also makes sure interrupts are always still disabled when calling a debugger, which prevents: BUG: using smp_processor_id() in preemptible [00000001] code: tpopf/1470 caller is post_kprobe_handler+0x9/0x70 Call Trace:<ffffffff8024f10f>{smp_processor_id+191} <ffffffff80120e69>{post_kpro be_handler+9} <ffffffff80120f7a>{kprobe_exceptions_notify+58} <ffffffff80144fc0>{notifier_call_chain+32} <ffffffff80110daf>{do_debug+335} <ffffffff8010f513>{debug+127} <EOE> on preemptible debug kernels with kprobes when single stepping in user space. This was probably a bug even on non preempt kernels, this function was supposed to be running with interrupts off according to a comment there. Note to third part debugger maintainers: please double check your debugger can still single step. Cc: <prasanna@in.ibm.com> Cc: <jbeulich@novell.com> Cc: <kaos@sgi.com> Cc: <jim.houston@ccur.com> Cc: <jfv@bluesong.net> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Look for gaps in the e820 memory map to put PCI resources in. This hopefully fixes problems with the PCI code assigning 32bit BARs MMIO resources which are >32bit. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-