Originally vfs_getxattr would pull the security xattr variable using
the inode getxattr handle and then proceed to clobber it with a subsequent call
to the LSM.

This patch reorders the two operations such that when the xattr requested is
in the security namespace it first attempts to grab the value from the LSM
directly.

If it fails to obtain the value because there is no module present or the
module does not support the operation it will fall back to using the inode
getxattr operation.

In the event that both are inaccessible it returns EOPNOTSUPP.
Signed-off-by: NDavid P. Quigley <dpquigl@tycho.nsa.gov>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Chris Wright <chrisw@sous-sol.org>
Acked-by: NJames Morris <jmorris@namei.org>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch modifies the interface to inode_getsecurity to have the function
return a buffer containing the security blob and its length via parameters
instead of relying on the calling function to give it an appropriately sized
buffer.

Security blobs obtained with this function should be freed using the
release_secctx LSM hook.  This alleviates the problem of the caller having to
guess a length and preallocate a buffer for this function allowing it to be
used elsewhere for Labeled NFS.

The patch also removed the unused err parameter.  The conversion is similar to
the one performed by Al Viro for the security_getprocattr hook.
Signed-off-by: NDavid P. Quigley <dpquigl@tycho.nsa.gov>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Chris Wright <chrisw@sous-sol.org>
Acked-by: NJames Morris <jmorris@namei.org>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After making dirty a 100M file, the normal behavior is to start the
writeback for all data after 30s delays.  But sometimes the following
happens instead:

	- after 30s:    ~4M
	- after 5s:     ~4M
	- after 5s:     all remaining 92M

Some analyze shows that the internal io dispatch queues goes like this:

		s_io            s_more_io
		-------------------------
	1)	100M,1K         0
	2)	1K              96M
	3)	0               96M
1) initial state with a 100M file and a 1K file

2) 4M written, nr_to_write <= 0, so write more

3) 1K written, nr_to_write > 0, no more writes(BUG)

nr_to_write > 0 in (3) fools the upper layer to think that data have all
been written out.  The big dirty file is actually still sitting in
s_more_io.  We cannot simply splice s_more_io back to s_io as soon as s_io
becomes empty, and let the loop in generic_sync_sb_inodes() continue: this
may starve newly expired inodes in s_dirty.  It is also not an option to
draw inodes from both s_more_io and s_dirty, an let the loop go on: this
might lead to live locks, and might also starve other superblocks in sync
time(well kupdate may still starve some superblocks, that's another bug).

We have to return when a full scan of s_io completes.  So nr_to_write > 0
does not necessarily mean that "all data are written".  This patch
introduces a flag writeback_control.more_io to indicate that more io should
be done.  With it the big dirty file no longer has to wait for the next
kupdate invokation 5s later.

In sync_sb_inodes() we only set more_io on super_blocks we actually
visited.  This avoids the interaction between two pdflush deamons.

Also in __sync_single_inode() we don't blindly keep requeuing the io if the
filesystem cannot progress.  Failing to do so may lead to 100% iowait.
Tested-by: NMike Snitzer <snitzer@gmail.com>
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Michael Rubin <mrubin@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since I_SYNC was split out from I_LOCK, the concern in commit
4b89eed9 ("Write back inode data pages
even when the inode itself is locked") is not longer valid.

We should revert to the original behavior: in __writeback_single_inode(),
when we find an I_SYNC-ed inode and we're not doing a data-integrity sync,
skip writing entirely.  Otherwise, we are double calling do_writepages()
Signed-off-by: NQi Yong <qiyong@fc-cn.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Joern Engel <joern@wohnheim.fh-wedel.de>
Cc: WU Fengguang <wfg@mail.ustc.edu.cn>
Cc: Michael Rubin <mrubin@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes a sles9 system hang in start_this_handle from a customer
with some heavy workload where all tasks are waiting on kjournald to commit
the transaction, but kjournald waits on t_updates to go down to zero (it
never does).

This was reported as a lowmem shortage deadlock but when checking the debug
data I noticed the VM wasn't under pressure at all (well it was really
under vm pressure, because lots of tasks hanged in the VM prune_dcache
methods trying to flush dirty inodes, but no task was hanging in GFP_NOFS
mode, the holder of the journal handle should have if this was a vm issue
in the first place).

No task was apparently holding the leftover handle in the committing
transaction, so I deduced t_updates was stuck to 1 because a journal_stop
was never run by some path (this turned out to be correct).  With a debug
patch adding proper reverse links and stack trace logging in ext3 deployed
in production, I found journal_stop is never run because
mark_inode_dirty_sync is called inside release_task called by do_exit.
(that was quite fun because I would have never thought about this
subtleness, I thought a regular path in ext3 had a bug and it forgot to
call journal_stop)

do_exit->release_task->mark_inode_dirty_sync->schedule() (will never
come back to run journal_stop)

The reason is that shrink_dcache_parent is racy by design (feature not
a bug) and it can do blocking I/O in some case, but the point is that
calling shrink_dcache_parent at the last stage of do_exit isn't safe
for self-reaping tasks.

I guess the memory pressure of the unbalanced highmem system allowed
to trigger this more easily.

Now mainline doesn't have this line in iput (like sles9 has):

    	     if (inode->i_state & I_DIRTY_DELAYED)
	     			mark_inode_dirty_sync(inode);

so it will probably not crash with ext3, but for example ext2 implements an
I/O-blocking ext2_put_inode that will lead to similar screwups with
ext2_free_blocks never coming back and it's definitely wrong to call
blocking-IO paths inside do_exit.  So this should fix a subtle bug in
mainline too (not verified in practice though).  The equivalent fix for
ext3 is also not verified yet to fix the problem in sles9 but I don't have
doubt it will (it usually takes days to crash, so it'll take weeks to be
sure).

An alternate fix would be to offload that work to a kernel thread, but I
don't think a reschedule for this is worth it, the vm should be able to
collect those entries for the synchronous release_task.
Signed-off-by: NAndrea Arcangeli <andrea@suse.de>
Cc: Jan Kara <jack@ucw.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make /proc/ page monitoring configurable

This puts the following files under an embedded config option:

/proc/pid/clear_refs
/proc/pid/smaps
/proc/pid/pagemap
/proc/kpagecount
/proc/kpageflags

[akpm@linux-foundation.org: Kconfig fix]
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This makes a subset of physical page flags available to userspace. Together
with /proc/pid/kpagemap, this allows tracking of a wide variety of VM behaviors.

Exported flags are decoupled from the kernel's internal flags. This
allows us to reorder flag bits, and synthesize any bits that get
redefined in terms of other bits.

[akpm@linux-foundation.org: remove unneeded access_ok()]
[akpm@linux-foundation.org: s/0/NULL/]
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This makes physical page map counts available to userspace. Together
with /proc/pid/pagemap and /proc/pid/clear_refs, this can be used to
monitor memory usage on a per-page basis.

[akpm@linux-foundation.org: remove unneeded access_ok()]
[bunk@stusta.de: make struct proc_kpagemap static]
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This interface provides a mapping for each page in an address space to its
physical page frame number, allowing precise determination of what pages are
mapped and what pages are shared between processes.

New in this version:

- headers gone again (as recommended by Dave Hansen and Alan Cox)
- 64-bit entries (as per discussion with Andi Kleen)
- swap pte information exported (from Dave Hansen)
- page walker callback for holes (from Dave Hansen)
- direct put_user I/O (as suggested by Rusty Russell)

This patch folds in cleanups and swap PTE support from Dave Hansen
<haveblue@us.ibm.com>.
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reorder source so that all the code and data for each interface is together.
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This puts all the clear_refs code where it belongs and probably lets things
compile on MMU-less systems as well.
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This pulls the shared map display code out of show_map and puts it in
show_smap where it belongs.
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the generic pagewalker for smaps and clear_refs
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The "proportional set size" (PSS) of a process is the count of pages it has
in memory, where each page is divided by the number of processes sharing
it.  So if a process has 1000 pages all to itself, and 1000 shared with one
other process, its PSS will be 1500.

               - lwn.net: "ELC: How much memory are applications really using?"

The PSS proposed by Matt Mackall is a very nice metic for measuring an
process's memory footprint.  So collect and export it via
/proc/<pid>/smaps.

Matt Mackall's pagemap/kpagemap and John Berthels's exmap can also do the
job.  They are comprehensive tools.  But for PSS, let's do it in the simple
way.

Cc: John Berthels <jjberthels@gmail.com>
Cc: Bernardo Innocenti <bernie@codewiz.org>
Cc: Padraig Brady <P@draigBrady.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allow sticky directory mount option for hugetlbfs.  This allows admin
to create a shared hugetlbfs mount point for multiple users, while
prevent accidental file deletion that users may step on each other.
It is similiar to default tmpfs mount option, or typical option used
on /tmp.
Signed-off-by: NKen Chen <kenchen@google.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: David Gibson <hermes@gibson.dropbear.id.au>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The constructor for buffer_head slabs was removed recently.  We need the
constructor back in slab defrag in order to insure that slab objects always
have a definite state even before we allocated them.

I think we mistakenly merged the removal of the constuctor into a cleanup
patch.  You (ie: akpm) had a test that showed that the removal of the
constructor led to a small regression.  The prior state makes things easier
for slab defrag.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Checking if an address is a vmalloc address is done in a couple of places.
Define a common version in mm.h and replace the other checks.

Again the include structures suck.  The definition of VMALLOC_START and
VMALLOC_END is not available in vmalloc.h since highmem.c cannot be included
there.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Simplify page cache zeroing of segments of pages through 3 functions

zero_user_segments(page, start1, end1, start2, end2)

        Zeros two segments of the page. It takes the position where to
        start and end the zeroing which avoids length calculations and
	makes code clearer.

zero_user_segment(page, start, end)

        Same for a single segment.

zero_user(page, start, length)

        Length variant for the case where we know the length.

We remove the zero_user_page macro. Issues:

1. Its a macro. Inline functions are preferable.

2. The KM_USER0 macro is only defined for HIGHMEM.

   Having to treat this special case everywhere makes the
   code needlessly complex. The parameter for zeroing is always
   KM_USER0 except in one single case that we open code.

Avoiding KM_USER0 makes a lot of code not having to be dealing
with the special casing for HIGHMEM anymore. Dealing with
kmap is only necessary for HIGHMEM configurations. In those
configurations we use KM_USER0 like we do for a series of other
functions defined in highmem.h.

Since KM_USER0 is depends on HIGHMEM the existing zero_user_page
function could not be a macro. zero_user_* functions introduced
here can be be inline because that constant is not used when these
functions are called.

Also extract the flushing of the caches to be outside of the kmap.

[akpm@linux-foundation.org: fix nfs and ntfs build]
[akpm@linux-foundation.org: fix ntfs build some more]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Steven French <sfrench@us.ibm.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: David Chinner <dgc@sgi.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Steven French <sfrench@us.ibm.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is the new timerfd API as it is implemented by the following patch:

int timerfd_create(int clockid, int flags);
int timerfd_settime(int ufd, int flags,
		    const struct itimerspec *utmr,
		    struct itimerspec *otmr);
int timerfd_gettime(int ufd, struct itimerspec *otmr);

The timerfd_create() API creates an un-programmed timerfd fd.  The "clockid"
parameter can be either CLOCK_MONOTONIC or CLOCK_REALTIME.

The timerfd_settime() API give new settings by the timerfd fd, by optionally
retrieving the previous expiration time (in case the "otmr" parameter is not
NULL).

The time value specified in "utmr" is absolute, if the TFD_TIMER_ABSTIME bit
is set in the "flags" parameter.  Otherwise it's a relative time.

The timerfd_gettime() API returns the next expiration time of the timer, or
{0, 0} if the timerfd has not been set yet.

Like the previous timerfd API implementation, read(2) and poll(2) are
supported (with the same interface).  Here's a simple test program I used to
exercise the new timerfd APIs:

http://www.xmailserver.org/timerfd-test2.c

[akpm@linux-foundation.org: coding-style cleanups]
[akpm@linux-foundation.org: fix ia64 build]
[akpm@linux-foundation.org: fix m68k build]
[akpm@linux-foundation.org: fix mips build]
[akpm@linux-foundation.org: fix alpha, arm, blackfin, cris, m68k, s390, sparc and sparc64 builds]
[heiko.carstens@de.ibm.com: fix s390]
[akpm@linux-foundation.org: fix powerpc build]
[akpm@linux-foundation.org: fix sparc64 more]
Signed-off-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As Roland pointed out, we have the very old problem with exec.  de_thread()
sets SIGNAL_GROUP_EXIT, kills other threads, changes ->group_leader and then
clears signal->flags.  All signals (even fatal ones) sent in this window
(which is not too small) will be lost.

With this patch exec doesn't abuse SIGNAL_GROUP_EXIT.  signal_group_exit(),
the new helper, should be used to detect exit_group() or exec() in progress.
It can have more users, but this patch does only strictly necessary changes.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Robin Holt <holt@sgi.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It was dumb to make get_task_comm() return void.  Change it to return a
pointer to the resulting output for caller convenience.

Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On Sat, 2008-01-05 at 13:35 -0800, Davide Libenzi wrote:

> I remember I talked with Arjan about this time ago. Basically, since 1)
> you can drop an epoll fd inside another epoll fd 2) callback-based wakeups
> are used, you can see a wake_up() from inside another wake_up(), but they
> will never refer to the same lock instance.
> Think about:
>
> 	dfd = socket(...);
> 	efd1 = epoll_create();
> 	efd2 = epoll_create();
> 	epoll_ctl(efd1, EPOLL_CTL_ADD, dfd, ...);
> 	epoll_ctl(efd2, EPOLL_CTL_ADD, efd1, ...);
>
> When a packet arrives to the device underneath "dfd", the net code will
> issue a wake_up() on its poll wake list. Epoll (efd1) has installed a
> callback wakeup entry on that queue, and the wake_up() performed by the
> "dfd" net code will end up in ep_poll_callback(). At this point epoll
> (efd1) notices that it may have some event ready, so it needs to wake up
> the waiters on its poll wait list (efd2). So it calls ep_poll_safewake()
> that ends up in another wake_up(), after having checked about the
> recursion constraints. That are, no more than EP_MAX_POLLWAKE_NESTS, to
> avoid stack blasting. Never hit the same queue, to avoid loops like:
>
> 	epoll_ctl(efd2, EPOLL_CTL_ADD, efd1, ...);
> 	epoll_ctl(efd3, EPOLL_CTL_ADD, efd2, ...);
> 	epoll_ctl(efd4, EPOLL_CTL_ADD, efd3, ...);
> 	epoll_ctl(efd1, EPOLL_CTL_ADD, efd4, ...);
>
> The code "if (tncur->wq == wq || ..." prevents re-entering the same
> queue/lock.

Since the epoll code is very careful to not nest same instance locks
allow the recursion.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Drivers that register a ->fault handler, but do not range-check the
offset argument, must set VM_DONTEXPAND in the vm_flags in order to
prevent an expanding mremap from overflowing the resource.

I've audited the tree and attempted to fix these problems (usually by
adding VM_DONTEXPAND where it is not obvious).
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fcntl(F_GETLK,..) can return pid of process for not current pid namespace
(if process is belonged to the several namespaces).  It is true also for
pids in /proc/locks.  So correct behavior is saving pointer to the struct
pid of the process lock owner.
Signed-off-by: NVitaliy Gusev <vgusev@openvz.org>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

interruptible_sleep_on_locked() is just an open-coded
wait_event_interruptible_timeout(), with the one difference that
interruptible_sleep_on_locked() doesn't bother to check the condition on
which it is waiting, depending instead on the BKL to avoid the case
where it blocks after the wakeup has already been called.

locks_block_on_timeout() is only used in one place, so it's actually
simpler to inline it into its caller.
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

For such a short function (with such a long comment),
posix_locks_deadlock() seems to cause a lot of confusion.  Attempt to
make it a bit clearer:

	- Remove the initial posix_same_owner() check, which can never
	  pass (since this is only called in the case that block_fl and
	  caller_fl conflict)
	- Use an explicit loop (and a helper function) instead of a goto.
	- Rewrite the comment, attempting a clearer explanation, and
	  removing some uninteresting historical detail.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

s/litle/little
Signed-off-by: NOhad Ben-Cohen <ohad@bencohen.org>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>

Signed-off-by: NPaulius Zaleckas <pauliusz@yahoo.com>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>

Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>

Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>

It's possible for a RPC to outlive the lockd daemon that created it, so
we need to make sure that all RPC's are killed when lockd is coming
down. When nlm_shutdown_hosts is called, kill off all RPC tasks
associated with the host. Since we need to wait until they have all gone
away, we might as well just shut down the RPC client altogether.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Neil Brown points out that we're checking buf[size-1] in a couple places
without first checking whether size is zero.

Actually, given the implementation of simple_transaction_get(), buf[-1]
is zero, so in both of these cases the subsequent check of the value of
buf[size-1] will catch this case.

But it seems fragile to depend on that, so add explicit checks for this
case.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Acked-by: NNeilBrown <neilb@suse.de>

Wendy Cheng noticed that function name doesn't agree here.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Cc: Wendy Cheng <wcheng@redhat.com>

Neither EPERM and ENOENT map to valid errors for PUTROOTFH according to
rfc 3530, and, if anything, ENOENT is likely to be slightly more
informative; so don't bother mapping ENOENT to EPERM.  (Probably this
was originally done because one likely cause was that there is an fsid=0
export but that it isn't permitted to this particular client.  Now that
we allow WRONGSEC returns, this is somewhat less likely.)

In the long term we should work to make this situation less likely,
perhaps by turning off nfsv4 service entirely in the absence of the
pseudofs root, or constructing a pseudofilesystem root ourselves in the
kernel as necessary.

Thanks to Benny Halevy <bhalevy@panasas.com> for pointing out this
problem.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Cc: Benny Halevy <bhalevy@panasas.com>

Create a transport independent version of the svc_sock_names function.

The toclose capability of the svc_sock_names service can be implemented
using the svc_xprt_find and svc_xprt_close services.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Update the write handler for the portlist file to allow creating new
listening endpoints on a transport. The general form of the string is:

<transport_name><space><port number>

For example:

echo "tcp 2049" > /proc/fs/nfsd/portlist

This is intended to support the creation of a listening endpoint for
RDMA transports without adding #ifdef code to the nfssvc.c file.

Transports can also be removed as follows:

'-'<transport_name><space><port number>

For example:

echo "-tcp 2049" > /proc/fs/nfsd/portlist

Attempting to add a listener with an invalid transport string results
in EPROTONOSUPPORT and a perror string of "Protocol not supported".

Attempting to remove an non-existent listener (.e.g. bad proto or port)
results in ENOTCONN and a perror string of
"Transport endpoint is not connected"
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Add a new svc function that allows a service to query whether a
transport instance has already been created. This is used in lockd
to determine whether or not a transport needs to be created when
a lockd instance is brought up.

Specifying 0 for the address family or port is effectively a wild-card,
and will result in matching the first transport in the service's list
that has a matching class name.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Move sk_list and sk_ready to svc_xprt. This involves close because these
lists are walked by svcs when closing all their transports. So I combined
the moving of these lists to svc_xprt with making close transport independent.

The svc_force_sock_close has been changed to svc_close_all and takes a list
as an argument. This removes some svc internals knowledge from the svcs.

This code races with module removal and transport addition.

Thanks to Simon Holm Thøgersen for a compile fix.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Cc: Simon Holm Thøgersen <odie@cs.aau.dk>

Modify the various kernel RPC svcs to use the svc_create_xprt service.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>