Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.  Also use
human-time conversion functions instead of hard-coded HZ division to avoid
rounding errors.
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Cc: <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix new kernel-doc errors in vmalloc.c.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Docs for ramfs, rootfs, and initramfs.
Signed-off-by: NRob Landley <rob@landley.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch splits dentry locking documentation from
Documentation/filesystems/vfs.txt to a separate file.  The dentry locking
bits are useful but do not fit into the VFS overview document as is.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch updates the Documentation/filesystems/vfs.txt document.  I
rearranged and rewrote parts of the introduction chapter and added better
headings for each section.  I also added a description for the inode
rename() operation which was missing and added links to some useful
external VFS documentation.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Convert to proper kernel-doc format.

Some have extra blank lines (not allowed immed.  after the function name)
or need blank lines (after all parameters).  Function summary must be only
one line.

Colon (":") in a function description does weird things (causes kernel-doc
to think that it's a new section head sadly).
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Various core kernel-doc cleanups:
- add missing function parameters in ipc, irq/manage, kernel/sys,
  kernel/sysctl, and mm/slab;
- move description to just above function for kernel_restart()
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Put text into < 80 columns.  No other changes.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix various warnings in kernel-doc:

Warning(linux-2614-rc4//include/linux/net.h:89): Enum value 'SOCK_DCCP' not described in enum 'sock_type'

usercopy.c: should use !E instead of !I for exported symbols:
Warning(linux-2614-rc4//arch/i386/lib/usercopy.c): no structured comments found

fs.h does not need to use !E since it has no exported symbols:
Warning(linux-2614-rc4//include/linux/fs.h:1182): No description found for parameter 'find_exported_dentry'
Warning(linux-2614-rc4//include/linux/fs.h): no structured comments found

irq/manage.c should use !E for its exported symbols:
Warning(linux-2614-rc4//kernel/irq/manage.c): no structured comments found

macmodes.c should use !E for its exported symbols:
Warning(linux-2614-rc4//drivers/video/macmodes.c): no structured comments found
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add structure fields kernel-doc for 2 fields in struct journal_s.

Warning(/var/linsrc/linux-2614-rc4//include/linux/jbd.h:808): No description found for parameter 'j_wbuf'
Warning(/var/linsrc/linux-2614-rc4//include/linux/jbd.h:808): No description found for parameter 'j_wbufsize'

Convert fs/jbd/recovery.c non-static functions to kernel-doc format.

fs/jbd/recovery.c doesn't export any symbols, so it should use
!I instead of !E to eliminate this warning message:

Warning(/var/linsrc/linux-2614-rc4//fs/jbd/recovery.c): no structured comments found
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up typos, kernel function interfaces, acronyms, add whitespace,
improve readability.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update ksymoops related documentation to reflect current 2.6 reality.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I've recently added this documentation, Alasdair gave some corrections, and
here are some further corrections on top of his work (partly style issue,
partly a technical error due to different past experience, partly a note
which I've added - i.e.  transient snapshots are lighter).

Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The current init code sets hiprilvl to 0 and maxhipri to 5.  According to the
specs those values are illegal on both G200 and G400.  It also causes
distortions on the TV-out at least when CRTC2 is in YUV mode as is the case
with DirectFB.  This patch resets both values to 0.
Signed-off-by: NVille Syrjälä <syrjala@sci.fi>
Signed-off-by: NPetr Vandrovec <petr@vandrovec.name>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

No point in spamming the logs with a message about xres rounding.
Signed-off-by: NVille Syrjl <syrjala@sci.fi>
Signed-off-by: NPetr Vandrovec <petr@vandrovec.name>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use the CACHEFLUSH register on all chip types.  The register is listed in all
other specs except 2064W.  However I have verified that the register does work
on a 2064W despite being marked reserved in the specs.  There were no
noticeable side effects after writing to the register.
Signed-off-by: NVille Syrjälä <syrjala@sci.fi>
Signed-off-by: NPetr Vandrovec <petr@vandrovec.name>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add new entries for Mystique AGP with the PCI ID 0x051e.

I don't actually have such boards but according to google they do exist.
Curiosly X.Org doesn't recognize that PCI ID.  And what's even more
interesting is that Matrox's own Windows drivers don't recognize it either.
After going through about a dozen different versions I did find one older
driver that does list this particular ID.  It is also listed in the pci.ids
file.

I'm not sure if non-220 AGP chips exist.  I left the chip revision check
intact for AGP chips nonetheless.
Signed-off-by: NVille Syrjl <syrjala@sci.fi>
Signed-off-by: NPetr Vandrovec <petr@vandrovec.name>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

wait_event_event_interruptible() uses a private wait queue entry so there's no
need for the caller to initialize one.
Signed-off-by: NVille Syrjl <syrjala@sci.fi>
Signed-off-by: NPetr Vandrovec <petr@vandrovec.name>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Here's the PCI ID for the ATI RN50 chip.
Signed-off-by: NJake Moilanen <moilanen@austin.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@hotpop.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Convert i810fb, nvidiafb and savagefb to use the fb_find_best_display helper
when searching for the initial video mode.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add new helper, fb_find_best_display(), which will search the modelist for the
best mode for the attached display.  This requires an EDID block that is
converted to struct fb_monspecs and a private modelist.  The search will be
done in this manner:

- if 1st detailed timing is preferred, use that
- else if dimensions of the display are known, use that to estimate xres and
- else if modelist has detailed timings, use the first detailed timing
- else, use the very first entry from the modelist
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Rearrange mode database entries such that preferred timings are entered first,
and less preferred timings are entered last.  (Detailed, VESA,
established/standard).
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I converted the "rl" console font from the kbd utility to be a built-in font
for the framebuffer console, and I was wondering if you would be OK with
including it.  I've generated a font_rl.c file and related minor
modifications.  I find it's the most visually appealing of the kbd fonts which
is why I use it and selected it for conversion.  I believe the font is GPL'd.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix following compile error (From Kernel Bugzilla Bug 5427):

include/linux/console_struct.h:53: error: field `vt_mode' has incomplete type
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- The functions for reading the 1st and 2nd bus are essentially the same,
  except for the register.  Consolidate them all.

- According to Nicolas Boichat, there is an undocumented 3rd i2c bus for
  attaching daughter cards.  Add support for this.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

vesafb occassionally gets the size wrong when setting the mtrr.  When X or DRI
attempts to set the mtrr, it will fail due to range overlap significantly
affecting their performance.  Disable mtrr and let the user explicitly enable
it with the mtrr:n option.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initialise the .owner field, so that if the driver is built as a module, the
system has a link to the owner
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently the fb_find_nearest_mode() function finds a mode with screen
resolution closest to that described by the 'var' argument and with some
arbitrary refresh rate (eg.  in the following sequence of refresh rates: 70 60
53 85 75, 53 is selected).

This patch fixes the function so that it looks for the closest mode as far as
both resolution and refresh rate are concerned.  The function's first argument
is changed to fb_videomode so that the refresh rate can be specified by the
caller, as fb_var_screeninfo doesn't have any fields that could directly hold
this data.
Signed-off-by: NMichal Januszewski <spock@gentoo.org>
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use do {} while(0) for empty reverse_order() macro.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some EDID blocks set the flag "prefer first detailed timing" without providing
any detailed timing at all.  Clear this flag if the block does not provide
detailed timings.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Attached is a small patch which configures the correct memory clock and
timings on the Elsa Winner 2000 Office pm2 based card.  This is necessary when
the card is used on a platform which does not support PC style BIOS
initialization.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use MMIO registers instead of banging the VGA IO registers.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Reported by: Jean-Philippe Guérard (Bugzilla Bug 1782)

"I've tried with video=atyfb:debug and video=atyfb:debug,mode:1280x600, \
nomtrr.

In both case, the screen stays black, but seems divided into 4 vertical bands.
 Some white lines pop up randomly on each vertical band."

The problem is a combination of an incorrect xclk plus lack of timing
information.  The adapter is attached to an LCD device that can do 1280x600
(which is not a standard resolution).  The global mode database does not have
an entry for it.  Fortunately, the Video BIOS contains the complete timing
info for this display, however, atyfb is not making use of it.

Add support to get the timing information from the BIOS, if available.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix out-of-bounds bug.  The pseudopalette has room only for 16 entries, thus,
write only the first 16 entries to the pseudopalette.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove software clipping from imageblit, fillrect and copyarea.  Clipping is
not needed because the console layer assures that reads/writes doest not
happen beyond the extents of the framebuffer.  And software clipping tends to
hide bugs, if they do exist.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If machine has more than 1 driver installed, and they all drive the same
hardware, it's possible that the driver's fb_release() method will attempt to
restore the hardware state to the initial state.  This will leave the new
driver in an undefined state.  To prevent this problem, initialize the new
driver by calling fb_set_par() when the old driver is released by fbcon.

Signed-off-by: Antonino Daplas<adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Instead of manually filling up the fields in struct fb_var_screeninfo, use the
display_to_var() helper.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>