Currently the msbits constraints requires to specify a specific sample
format width for which the constraint should be applied. But often the
number of most significant bits is not sample format specific, but rather a
absolute limit. E.g. the PCM interface might accept 32-bit and 24-bit
samples, but the DAC has a 16-bit resolution and throws away the LSBs. In
this case for both 32-bit and 24-bit format msbits should be set to 16. This
patch extends snd_pcm_hw_constraint_msbits() so that a wildcard constraint
can be setup that is applied for all formats with a sample width larger than
the specified msbits. Choosing the wildcard constraint is done by setting
the sample width parameter of the function to 0.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If the sound card is made up of discrete components, each with their own
driver (e.g. like in the ASoC case), we might end up with multiple msbits
constraint rules installed. Currently this will result in msbits being set
to whatever the last rule set it to.

This patch updates the behavior of the rule to choose the minimum (other
than zero) of all the installed rules.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALSA PCM core has a mechanism tracking the PCM hwptr updates for
analyzing XRUNs.  But its log is limited (up to 10) and its log output
is a kernel message, which is hard to handle.

In this patch, the hwptr logging is moved to the tracing
infrastructure instead of its own.  Not only the hwptr updates but
also XRUN and hwptr errors are recorded on the trace log, so that user
can see such events at the exact timing.

The new "snd_pcm" entry will appear in the tracing events:
  # ls -F /sys/kernel/debug/tracing/events/snd_pcm
  enable  filter  hw_ptr_error/  hwptr/  xrun/

The hwptr is for the regular hwptr update events.  An event trace
looks like:

  aplay-26187 [004] d..3  4012.834761: hwptr: pcmC0D0p/sub0: POS: pos=488, old=0, base=0, period=1024, buf=16384

"POS" shows the hwptr update by the explicit position update call and
"IRQ" means the hwptr update by the interrupt,
i.e. snd_pcm_period_elapsed() call.  The "pos" is the passed
ring-buffer offset by the caller, "old" is the previous hwptr, "base"
is the hwptr base position, "period" and "buf" are period- and
buffer-size of the target PCM substream.
(Note that the hwptr position displayed here isn't the ring-buffer
 offset.  It increments up to the PCM position boundary.)

The XRUN event appears similarly, but without "pos" field.
The hwptr error events appear with the PCM identifier and its reason
string, such as "Lost interrupt?".

The XRUN and hwptr error reports on kernel message are still left, can
be turned on/off via xrun_debug proc like before.  But the bit 3, 4, 5
and 6 bits of xrun_debug proc are dropped by this patch.  Also, along
with the change, the message strings have been reformatted to be a bit
more consistent.

Last but not least, the hwptr reporting is enabled only when
CONFIG_SND_PCM_XRUN_DEBUG is set.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

While converting to dev_*(), the message showing the invalid PCM
position was wrongly tagged as if an XRUN although it's actually a
BUG.  This patch corrects the message again.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The calculated frame size was wrong because snd_pcm_format_physical_width()
actually returns the number of bits, not bytes.

Use snd_pcm_format_size() instead, which not only returns bytes, but also
simplifies the calculation.

Fixes: 8bea869c ("ALSA: PCM midlevel: improve fifo_size handling")
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Changing an interval boundary to a multiple of the step size makes that
boundary exact.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The min parameter was not used by any caller.  And if it were used,
underflows in the calculations could lead to incorrect results.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: http://bugs.launchpad.net/bugs/1305480

The kerneloops-daemon scans dmesg for common crash signatures, among
which is 'BUG:'. The message emitted by the PCM library is really a
warning, so the most expedient thing to do seems to be to change the
string.
Signed-off-by: NTim Gardner <tim.gardner@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Allow modules to use it, fixing a build failure when the newly added
ADAU1977 driver is built as a module.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NMark Brown <broonie@linaro.org>
Acked-by: NTakashi Iwai <tiwai@suse.de>

Use dev_err() & co as much as possible.  If not available (no device
assigned at the calling point), use pr_xxx() helpers instead.

For simplicity, introduce new helpers for pcm stream, pcm_err(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the process is sleeping at the SNDRV_PCM_STATE_PAUSED
state from the wait_for_avail function, the sleep process will be woken by
timeout(10 seconds). Even if the sleep process wake up by timeout, by this
patch, the process will continue with sleep and wait for the other state.
Signed-off-by: NJongHo Kim <furmuwon@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The use of snd_printd_ratelimit() supresses superfluous output from
printk_ratelimit() when CONFIG_SND_DEBUG is not defined. For example,

[   43.753692] snd_pcm_update_hw_ptr0: 26 callbacks suppressed
[   48.822131] snd_pcm_update_hw_ptr0: 25 callbacks suppressed
[   53.894953] snd_pcm_update_hw_ptr0: 25 callbacks suppressed
[   58.997761] snd_pcm_update_hw_ptr0: 25 callbacks suppressed
[   64.100952] snd_pcm_update_hw_ptr0: 25 callbacks suppressed

fills the log even when no debug output is actually produced.

Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Yacine Belkadi <yacine.belkadi.1@gmail.com>
Signed-off-by: NTim Gardner <tim.gardner@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ops field of the snd_pcm_substream struct is never modified inside the ALSA
core. Making it const allows drivers to declare their snd_pcm_ops struct as
const.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

script/kernel-doc reports the following type of warnings (when run in verbose
mode):

Warning(sound/core/init.c:152): No description found for return value of
'snd_card_create'

To fix that:
- add missing descriptions of function return values
- use "Return:" sections to describe those return values

Along the way:
- complete some descriptions
- fix some typos
Signed-off-by: NYacine Belkadi <yacine.belkadi.1@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALSA did not provide any direct means to infer the audio time for A/V
sync and system/audio time correlations (eg. PulseAudio).
Applications had to track the number of samples read/written and
add/subtract the number of samples queued in the ring buffer.  This
accounting led to small errors, typically several samples, due to the
two-step process.  Computing the audio time in the kernel is more
direct, as all the information is available in the same routines.

Also add new .audio_wallclock routine to enable fine-grain synchronization
between monotonic system time and audio hardware time.
Using the wallclock, if supported in hardware, allows for a
much better sub-microsecond precision and a common drift tracking for
all devices sharing the same wall clock (master clock).
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Keep track of boundary crossing when hw_ptr
exceeds boundary limit and wraps-around. This
will help keep track of total number
of frames played/received at the kernel level
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A few files have been slipped from the previous commit to add MONO
channel type.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In general, mono streams have no dedicated speaker assignment, thus
they should be rather marked as UNKNOWN position.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The VOLATILE flag was added to control elements by
snd_pcm_add_chmap_ctls() just because I didn't want to have a
side-effect of "alsactl restore".  But now the set operation doesn't
allow to change the value unless the PCM stream is in PREAPRED state,
there is no reason to keep this flag.  Let's rip it off.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch implements the basic data types for the standard channel
mapping API handling.

- The definitions of the channel positions and the new TLV types are
  added in sound/asound.h and sound/tlv.h, so that they can be
  referred from user-space.

- Introduced a new helper function snd_pcm_add_chmap_ctls() to create
  control elements representing the channel maps for each PCM
  (sub)stream.

- Some standard pre-defined channel maps are provided for
  convenience.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

They aren't modified by the core so the drivers can declare them const.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Group read of hw_ptr, tstamp and jiffies in a sequence
for better correlation. Previous code took timestamp at the
end, which could introduce delays between audio time and
system time.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the PCM read/write loop, the driver calls snd_pcm_update_hw_ptr()
at each time at the beginning of the loop.  Russell King reported that
this hogs CPU significantly.

The current code assumes that the pointer callback is very fast and
cheap, also not too much fine grained.  It's not true in all cases.
When the pointer advances short samples while the read/write copy has
been performed, the driver updates the hw_ptr and gets avail > 0
again.  Then it tries to read/write these small chunks.  This repeats
until the avail really gets to zero.

For avoiding this situation, a simple workaround is to call
snd_pcm_update_hw_ptr() only once at starting the loop, assuming that
the read/write copy is performed fast enough.  If the available count
becomes short, it goes to snd_pcm_wait_avail() anyway, and this
processes right.
Tested-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Allows the constraint lists to be declared const by drivers which seems
reasonable; there's plenty of other constification we could do if we were
being complete but this was easy and quick.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These aren't modules, but they do make use of these macros, so
they will need export.h to get that definition.  Previously,
they got it via the implicit module.h inclusion.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Add a helper function to allow drivers to disable hardware resampling
when the application has specified the SNDRV_PCM_HW_PARAMS_NORESAMPLE
flag.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

wait_for_avail() in pcm_lib.c has a race in it (observed in practice by an
Intel validation group).

The function is supposed to return once space in the buffer has become
available, or if some timeout happens.  The entity that creates space (irq
handler of sound driver and some such) will do a wake up on a waitqueue
that this function registers for.

However there are two races in the existing code

1) If space became available between the caller noticing there was no
   space and this function actually sleeping, the wakeup is missed and the
   timeout condition will happen instead

2) If a wakeup happened but not sufficient space became available, the
   code will loop again and wait for more space.  However, if the second
   wake comes in prior to hitting the schedule_timeout_interruptible(), it
   will be missed, and potentially you'll wait out until the timeout
   happens.

The fix consists of using more careful setting of the current state (so
that if a wakeup happens in the main loop window, the schedule_timeout()
falls through) and by checking for available space prior to going into the
schedule_timeout() loop, but after being on the waitqueue and having the
state set to interruptible.

[tiwai: the following changes have been added to Arjan's original patch:
 - merged akpm's fix for waitqueue adding order into a single patch
 - reduction of duplicated code of avail check
]
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Formatting a PCM name is useful for module debug too.
Add snd_prefix when making function public.

[minor coding-style fixes by tiwai]
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the PCM period size is set larger than 10 seconds, currently the
PCM core may abort the operation with DMA-error due to the fixed timeout
for 10 seconds.  A similar problem is seen in the drain operation that
has a fixed timeout of 10 seconds, too.

This patch fixes the timeout length depending on the period size and
rate, also including the consideration of no_period_wakeup flag.
Reported-by: NRaymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The xrun_log function was augmented with the in_interrupt parameter whereas the
empty macro definition used when xrun logging is disabled was not.

Add a third parameter to the empty macro definition so as to not cause compiler
errors when xrun logging (CONFIG_SND_PCM_XRUN_DEBUG) is disabled.
Signed-off-by: NBen Gardiner <bengardiner@nanometrics.ca>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When debugging pcm drivers I found the "period" or "hw" prefix printed
by either XRUN_DEBUG_PERIODUPDATE or XRUN_DEBUG_PERIODUPDATE events,
respectively to be very useful is observing the interplay between
interrupt-context updates and syscall-context updates.

Similarly, when debugging overruns with XRUN_DEBUG_LOG it is useful to
see the context of the last 10 positions.

Add an in_interrupt member to hwptr_log_entry which stores the value of
the in_interrupt parameter of snd_pcm_update_hw_ptr0 when the log entry
is created. Print a "[Q]" prefix when dumping the log entries if
in_interrupt was true.
Signed-off-by: NBen Gardiner <bengardiner@nanometrics.ca>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When period interrupts are disabled, snd_pcm_update_hw_ptr0() compares
the current time against the time estimated for the current hardware
pointer to detect xruns.  The somewhat fuzzy threshold in the while loop
makes it possible that hdelta becomes negative; the comparison being
done with unsigned types then makes the loop go through the entire 263
negative range, and, depending on the value, never reach an unsigned
value that is small enough to stop the loop.  Doing this with interrupts
disabled results in the machine locking up.

To prevent this, ensure that the loop condition uses signed types for
both operands so that the comparison is correctly done.

Many thanks to Kelly Anderson for debugging this.
Reported-by: NNix <nix@esperi.org.uk>
Reported-by: N"Christopher K." <c.krooss@googlemail.com>
Reported-and-tested-by: NKelly Anderson <kelly@silka.with-linux.com>
Signed-off-by: NKelly Anderson <kelly@silka.with-linux.com>
[cl: remove unneeded casts; use a temp variable]
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Cc: 2.6.38 <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Coverity checker spotted that we do not always remember to call
va_end() on 'args' in failure paths in snd_pcm_hw_rule_add().
Here's a patch to fix that up (compile tested only) - it also removes
some annoying trailing whitespace that caught my eye while I was in the
area..
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a lightweight condition on top of the xrun checking so that we can
avoid the division when the application is calling the update function
often enough.
Suggested-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When period wakeups are disabled, successive calls to the pointer update
function do not have a maximum allowed distance, so xruns cannot be
detected with the pointer value only.

To detect xruns, compare the actually elapsed time with the time that
should have theoretically elapsed since the last update.  When the
hardware pointer has wrapped around due to an xrun, the actually elapsed
time will be too big by about hw_ptr_buffer_jiffies.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch allows to disable period interrupts which are
not needed when the application relies on a system timer
to wake-up and refill the ring buffer. The behavior of
the driver is left unchanged, and interrupts are only
disabled if the application requests this configuration.
The behavior in case of underruns is slightly different,
instead of being detected during the period interrupts the
underruns are detected when the application calls
snd_pcm_update_avail, which in turns forces a refresh of the
hw pointer and shows the buffer is empty.

More specifically this patch makes a lot of sense when
PulseAudio relies on timer-based scheduling to access audio
devices such as HDAudio or Intel SST. Disabling interrupts
removes two unwanted wake-ups due to period elapsed events
in low-power playback modes. It also simplifies PulseAudio
voice modules used for speech calls.

To quote Lennart "This patch looks very interesting and
desirable. This is something have long been waiting for."

Support for this in hardware drivers is optional.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@intel.com>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The current code in pcm_lib.c do all checks using only the position
in the ring buffer. Unfortunately, where the interrupts gets delayed or
merged into one, we need another timing source to check when the
buffer size boundary overlaps to avoid the wrong updating of the
ring buffer pointers.

This code uses jiffies to check the right time window without any
performance impact.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The current code in pcm_lib.c do all checks using only the position
in the ring buffer. Unfortunately, where the interrupts gets delayed or
merged into one, we need another timing source to check when the
buffer size boundary overlaps to avoid the wrong updating of the
ring buffer pointers.

This code uses jiffies to check the right time window without any
performance impact.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In situation when appl_ptr is far greater then hw_ptr, the hw_avail value
can be greater than buffer_size. Check for this.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>