Fixes the oops in cpufreq_stats with acpi_cpufreq driver.  The issue was
that the frequency was reported as 0 in acpi-cpufreq.c.  The bug is due to
different indicies for freq_table and ACPI perf table.

Also adds a check in cpufreq_stats to check for error return from
freq_table_get_index() and avoid using the error return value.

Patch fixes the issue reported at
http://www.ussg.iu.edu/hypermail/linux/kernel/0611.2/0629.html
and also other similar issue here
http://bugme.osdl.org/show_bug.cgi?id=7383 comment 53
Signed-off-by: NDhaval Giani <dhaval.giani@gmail.com>
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDave Jones <davej@redhat.com>

Make x86_64 ACPI_CPU_FREQ select CPU_FREQ_TABLE like other methods do.
(although we should still eliminate as much use of 'select' as possible)
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDave Jones <davej@redhat.com>

Some gcc's are more anal than others about empty switch labels.
error: label at end of compound statement
Signed-off-by: NDave Jones <davej@redhat.com>

C7's are centrino speedstep-alike.
Signed-off-by: NDave Jones <davej@redhat.com>

Check the correct variable and set policy->cur upon acpi-cpufreq
initialization to allow the userspace governor to be used as default.
Signed-off-by: NMattia Dongili <malattia@linux.it>
Acked-by: N"Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDave Jones <davej@redhat.com>

Small cleanup in acpi-cpufreq.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NDave Jones <davej@redhat.com>

This patch fixes a typo in cpufreq.c

From: Dhaval Giani <dhaval.giani@gmail.com>
Signed-off-by: NDave Jones <davej@redhat.com>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] kprobe clears qp bits for special instructions
  [IA64] enable trap code on slot 1
  [IA64] Take defensive stance on ia64_pal_get_brand_info()
  [IA64] fix possible XPC deadlock when disconnecting
  [IA64] - Reduce overhead of FP exception logging messages
  [IA64] fix arch/ia64/mm/contig.c:235: warning: unused variable `nid'
  [IA64] s/termios/ktermios/ in simserial.c
  [IA64] kexec/kdump: tidy up declaration of relocate_new_kernel_t
  [IA64] Kexec/Kdump: honour non-zero crashkernel offset.
  [IA64] CONFIG_KEXEC/CONFIG_CRASH_DUMP permutations
  [IA64] Do not call SN_SAL_SET_CPU_NUMBER twice on cpu 0

* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart:
  [AGPGART] VIA and SiS AGP chipsets are x86-only
  [AGPGART] agp-amd64: section mismatches with HOTPLUG=n
  [AGPGART] Fix up misprogrammed bridges with incorrect AGPv2 rates.

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IPoIB: Make sure struct ipoib_neigh.queue is always initialized
  IB/iser: Use the new verbs DMA mapping functions
  IB/srp: Use new verbs IB DMA mapping functions
  IPoIB: Use the new verbs DMA mapping functions
  IB/core: Use the new verbs DMA mapping functions
  IB/ipath: Implement new verbs DMA mapping functions
  IB: Add DMA mapping functions to allow device drivers to interpose
  RDMA/cma: Export rdma cm interface to userspace
  RDMA/cma: Add support for RDMA_PS_UDP
  RDMA/cma: Allow early transition to RTS to handle lost CM messages
  RDMA/cma: Report connect info with connect events
  RDMA/cma: Remove unneeded qp_type parameter from rdma_cm
  IB/ipath: Fix IRQ for PCI Express HCAs
  RDMA/amso1100: Fix memory leak in c2_qp_modify()
  IB/iser: Remove unused "write-only" variables
  IB/ipath: Remove unused "write-only" variables
  IB/fmr: ib_flush_fmr_pool() may wait too long

* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:
  Fix inotify maintainers entry
  Fix typo in new debug options.
  Jon needs a new shift key.
  fs: Convert kmalloc() + memset() to kzalloc() in fs/.
  configfs.h: Remove dead macro definitions.
  kconfig: Standardize "depends" -> "depends on" in Kconfig files
  e100: replace kmalloc with kcalloc
  um: replace kmalloc+memset with kzalloc
  fix typo in net/ipv4/ip_fragment.c
  include/linux/compiler.h: reject gcc 3 < gcc 3.2
  Kconfig: fix spelling error in config KALLSYMS help text
  Remove duplicate "have to" in comment
  Fix small typo in drivers/serial/icom.c
  Use consistent casing in help message
  EXT{2,3,4}_FS: remove outdated part of the help text

* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] pcwd_usb.c generic HID include file
  [WATCHDOG] watchdog miscdevice patch
  [WATCHDOG] rm9k_wdt: fix interrupt handler arguments
  [WATCHDOG] rm9k_wdt: fix compilation

There's no point in troubling the Alpha, IA-64, PowerPC and PARISC
people with SiS and VIA options.  Andrew thinks it helps find bugs,
but there's no evidence of that.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NDave Jones <davej@redhat.com>

When CONFIG_HOTPLUG=n, agp_amd64_resume() calls nforce3_agp_init(),
which is __devinit == __init, so has been discarded and is not
usable for resume.

WARNING: drivers/char/agp/amd64-agp.o - Section mismatch: reference to .init.text: from .text between 'agp_amd64_resume' (at offset 0x249) and 'amd64_tlbflush'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NDave Jones <davej@redhat.com>

Move the initialization of ipoib_neigh's skb_queue into
ipoib_neigh_alloc(), since commit 2745b5b7 ("IPoIB: Fix skb leak when
freeing neighbour") will make iterate over the skb_queue to free any
packets left over when freeing the ipoib_neigh structure.

This fixes a crash when freeing ipoib_neigh structures allocated in
ipoib_mcast_send(), which otherwise don't have their skb_queue
initialized.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Now that the generic HID layer created include/linux/hid.h
we can use the HID_REQ_SET_REPORT and HID_DT_REPORT defines
directly from that include file.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Conflicts:

	drivers/cpufreq/cpufreq.c

Support for CN400 northbridge when ACPI C3 isn't available.
Tested on Epia SP13000. Thanks to Robert for testing it.
Signed-off-by: NRafa Bilski <rafalbilski@interia.pl>
Signed-off-by: NDave Jones <davej@redhat.com>

On board of Epia SP13000 is 10x133Mhz VIA Nehemiah. It is reported
as 10x200MHz. This patch is fixing this issue.
Signed-off-by: NRafa Bilski <rafalbilski@interia.pl>
Signed-off-by: NDave Jones <davej@redhat.com>

Convert iSER to use the new verbs DMA mapping functions for kernel
verbs consumers.
Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Convert SRP to use the new verbs DMA mapping functions for kernel
verbs consumers.
Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Convert IPoIB to use the new DMA mapping functions
for kernel verbs consumers.
Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Support for Core CPUs was broken in two ways in speedstep-lib: for x86_64,
we missed a MSR definition; for both x86_64 and i386, the FSB calculation
was wrong by four (it's a quad-pumped bus). Also increase the accuracy
of the calculation.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NDave Jones <davej@redhat.com>

Convert code in core/ to use the new DMA mapping functions for kernel
verbs consumers.
Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This patch implements the interposing DMA mapping functions to allow
support for IOMMUs and remove the dependence on phys_to_virt() and
bus_to_virt().
Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The QLogic InfiniPath HCAs use programmed I/O instead of HW DMA.
This patch allows a verbs device driver to interpose on DMA mapping
function calls in order to avoid relying on bus_to_virt() and
phys_to_virt() to undo the mappings created by dma_map_single(),
dma_map_sg(), etc.
Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NDave Jones <davej@redhat.com>

Fix the bug in duplicate states elimination in acpi-cpufreq.

Bug: Due to duplicate state elimiation in the loop earlier, the number
of valid_states can be less than perf->state_count, in which case
freq_table was ending up with some garbage/uninitialized entries
in the table.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
From:  Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: NDave Jones <davej@redhat.com>

On some systems there could be bits set in the upper half of
the control value provided by the _PSS object.  These bits are
only relevant for cpufreq drivers that use IO ports which are not
currently supported by the speedstep-centrino driver.  The current
MSR oriented code assumes that upper bits are not set and thus
fails to work correctly when they are.  e.g. the control and status
value equality check failed on the IBM x3650 even though the ACPI
spec allows inequality.
Signed-off-by: NGary Hade <garyhade@us.ibm.com>
Signed-off-by: NDave Jones <davej@redhat.com>

We don't need a temporary variable to get the PCI revision ID.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NDave Jones <davej@redhat.com>

On IA64 there exists some special instructions which
always need to be executed regradless of qp bits, such
as com.crel.unc, tbit.trel.unc etc.
This patch clears qp bits when inserting kprobe trap code
and disables probepoint on slot 1 for these special
instructions.
Signed-off-by: Nbibo,mao <bibo.mao@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Because slot 1 of one instr bundle crosses border of two consecutive
8-bytes, kprobe on slot 1 is disabled. This patch enables kprobe on
slot1, it only replaces higher 8-bytes of the instruction bundle and
changes the exception code to ignore the low 12 bits of the break
number (which is across the border in the lower 8-bytes of the bundle).

For those instructions which must execute regardless qp bits,
kprobe on slot 1 is still disabled.
Signed-off-by: Nbibo,mao <bibo.mao@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Stephane thought he saw a problem here (but was just confused
by the return value from ia64_pal_get_brand_info()).  But we
should be more defensive here in case an prototype PAL for
a future processor doesn't implement this PAL call.
Signed-off-by: NTony Luck <tony.luck@intel.com>

Export the rdma cm interfaces to userspace via a misc device.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Allow the use of UD QPs through the rdma_cm, in order to provide
address translation services for resolving IB addresses for datagram
messages using SIDR.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

During connection establishment, the passive side of a connection can
receive messages from the active side before the connection event has
been delivered to the user.  Allow the passive side to send messages
in response to received data before the event is delivered.  To handle
the case where the connection messages are lost, a new rdma_notify()
function is added that users may invoke to force a connection into the
established state.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Connection information was never given to the recipient of a
connection request or reply message.  Only the event was delivered.
Report the connection data with the event to allows user to
reject the connection based on the requested parameters, or adjust
their resources to match the request.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The qp_type parameter into the rdma_cm is unneeded, and can be
misleading.  The QP type should be determined from the port space.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>