The struct v4l2_plane32 should set m.userptr as well. The same
happens in v4l2_buffer32 and v4l2-compliance tests for this.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Cc: <stable@vger.kernel.org>      # for v4.15 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Instead of doing sizeof(struct foo) use sizeof(*up). There even were
cases where 4 * sizeof(__u32) was used instead of sizeof(kp->reserved),
which is very dangerous when the size of the reserved array changes.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Cc: <stable@vger.kernel.org>      # for v4.15 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

These helper functions do not really help. Move the code to the
__get/put_v4l2_format32 functions.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Cc: <stable@vger.kernel.org>      # for v4.15 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The indentation of this source is all over the place. Fix this.
This patch only changes whitespace.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Cc: <stable@vger.kernel.org>      # for v4.15 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The result of the VIDIOC_PREPARE_BUF ioctl was never copied back
to userspace since it was missing in the switch.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Cc: <stable@vger.kernel.org>      # for v4.15 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

If the ioctl returned -ENOTTY, then don't bother copying
back the result as there is no point.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Cc: <stable@vger.kernel.org>      # for v4.15 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Don't duplicate the buffer type checks in enum/g/s/try_fmt.
The check_fmt function does that already.

It is hard to keep the checks in sync for all these functions and
in fact the check for VBI was wrong in the _fmt functions as it
allowed SDR types as well. This caused a v4l2-compliance failure
for /dev/swradio0 using vivid.

This simplifies the code and keeps the check in one place and
fixes the SDR/VBI bug.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Cc: <stable@vger.kernel.org>      # for v4.15 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

If the framebuffer is enabled and error injection is disabled, then
creating the controls for the video output device would fail with an
error.

This is because the Clear Framebuffer control uses the 'vivid control
class' and that control class isn't added if error injection is disabled.

In addition, this control was added to e.g. vbi devices as well, which
makes no sense.

Move this control to its own control handler and handle it correctly.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Cc: <stable@vger.kernel.org>      # for v4.15 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Do some cleanup of debug messages, making them cleaner and
easier to be used to analyze what's going on.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

When a packet discontinuity happens, it is not just the payload
that was lost. The headers are lost too. So, the max size is not
184 but, instead 188.

Also, while printing warnings, make a distinction between
MPEG-TS indicated discontinuity and detected one.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The XC2028_I2C_FLUSH only needs to be implemented on a few
devices. Others can safely ignore it.

That prevents filling the dmesg with lots of messages like:

	dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0

Cc: stable@vger.kernel.org
Fixes: 4d37ece7 ("[media] tuner/xc2028: Add I2C flush callback")
Reported-by: NEnrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Before this patch, when compiled for arm32, the signal strength
were reported as:

Lock   (0x1f) Signal= 4294908.66dBm C/N= 12.79dB

Because of a 32 bit integer overflow. After it, it is properly
reported as:

	Lock   (0x1f) Signal= -58.64dBm C/N= 12.79dB

Cc: stable@vger.kernel.org
Fixes: 0f91c9d6 ("[media] TS2020: Calculate tuner gain correctly")
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When built on a platform without gpiolib support, we run into
a couple of compile errors in ov7740, including:

drivers/media/i2c/ov7740.c: In function 'ov7740_set_power':
drivers/media/i2c/ov7740.c:307:4: error: implicit declaration of function 'gpiod_direction_output'; did you mean 'gpio_direction_output'? [-Werror=implicit-function-declaration]
    gpiod_direction_output(ov7740->pwdn_gpio, 0);
drivers/media/i2c/ov7740.c:914:4: error: 'GPIOD_OUT_HIGH' undeclared (first use in this function); did you mean 'GPIOF_INIT_HIGH'?

Changing it to use the correct header file solves the problem.

Fixes: 39c5c447 ("media: i2c: Add the ov7740 image sensor driver")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add nop variant of media_entity_cleanup. This allows calling
media_entity_cleanup whether or not Media controller is enabled,
simplifying driver code.

Also drop #ifdefs on a few drivers around media_entity_cleanup().
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Time to time, stream on is failing with a strange positive error.
Error code is returned erroneously by ov5640_set_ctrl_exposure()
due to ov5640_get_vts() return value wrongly treated as error.
Fix this by forcing ret to 0 after ov5640_get_vts() success call,
in order that ret is set to success for rest of code sequence.
Signed-off-by: NHugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

With "pages" initialized to vb length + 1 pages, the condition
check if(!pages--) will break at one more page than intended,
this can result in out-of-bound access to b->lop[i][j] when setting
the last dummy page.

Fixes: c7cbef1f ("media: intel-ipu3: cio2: fix a crash with out-of-bounds access")
Signed-off-by: NYong Zhi <yong.zhi@intel.com>
Signed-off-by: NCao Bing Bu <bingbu.cao@intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

My earlier patch missed two functions, these must be __maybe_unused
as well:

drivers/media/pci/intel/ipu3/ipu3-cio2.c:1867:12: error: 'cio2_runtime_resume' defined but not used [-Werror=unused-function]
drivers/media/pci/intel/ipu3/ipu3-cio2.c:1849:12: error: 'cio2_runtime_suspend' defined but not used [-Werror=unused-function]

Fixes: 2086dd35 ("media: intel-ipu3: cio2: mark PM functions as __maybe_unused")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This directory contains the videobuf2 framework, so name the
directory accordingly.

The name 'videobuf' typically refers to the old and deprecated
videobuf version 1 framework so that was confusing.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The cobalt sound driver has a dependency on ALSA, but not
on the PCM helper code, so this can lead to an extremely
rare link error in randconfig builds:

ERROR: "snd_pcm_period_elapsed" [drivers/media/pci/cobalt/cobalt.ko] undefined!
ERROR: "_snd_pcm_stream_lock_irqsave" [drivers/media/pci/cobalt/cobalt.ko] undefined!
ERROR: "snd_pcm_hw_constraint_integer" [drivers/media/pci/cobalt/cobalt.ko] undefined!
ERROR: "snd_pcm_set_ops" [drivers/media/pci/cobalt/cobalt.ko] undefined!
ERROR: "snd_pcm_stream_unlock_irqrestore" [drivers/media/pci/cobalt/cobalt.ko] undefined!
ERROR: "snd_pcm_lib_ioctl" [drivers/media/pci/cobalt/cobalt.ko] undefined!
ERROR: "snd_pcm_new" [drivers/media/pci/cobalt/cobalt.ko] undefined!

The other audio drivers select 'SND_PCM' for this, so let's
do the same.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Without CONFIG_DMA_SHARED_BUFFER we run into a link error for the
dma_buf_* APIs:

ERROR: "dma_buf_map_attachment" [drivers/staging/media/tegra-vde/tegra-vde.ko] undefined!
ERROR: "dma_buf_attach" [drivers/staging/media/tegra-vde/tegra-vde.ko] undefined!
ERROR: "dma_buf_get" [drivers/staging/media/tegra-vde/tegra-vde.ko] undefined!
ERROR: "dma_buf_put" [drivers/staging/media/tegra-vde/tegra-vde.ko] undefined!
ERROR: "dma_buf_detach" [drivers/staging/media/tegra-vde/tegra-vde.ko] undefined!
ERROR: "dma_buf_unmap_attachment" [drivers/staging/media/tegra-vde/tegra-vde.ko] undefined!
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NDmitry Osipenko <digetx@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Mention the maximum voltages of the CEC and HPD lines. Since in the example
these lines are connected to a Raspberry Pi and the Rpi GPIO lines are 3.3V
it is a good idea to warn against directly connecting the HPD to the Raspberry
Pi's GPIO line.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Cc: <stable@vger.kernel.org>      # for v4.15
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

As warned:
   drivers/media/i2c/dw9714.c: warning: incorrect type in initializer (different base types):  => 64:19
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The client field in driver's struct is redundant. Remove it.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: NRajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Call pm_runtime_idle() at the end of the driver's probe() function to
enable the device to reach low power state once probe() finishes.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: NRajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The rc5 protocol does not have a leading pulse or space, but we encode
the first bit using a single leading pulse. For other protocols, the
leading pulse or space does not represent any bit. So, don't remove the
first bit if a leading pulse is present.

Cc: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The IR rc6 encoder sends the header using manchester encoding using 0
bits, which causes the following:

UBSAN: Undefined behaviour in drivers/media/rc/rc-ir-raw.c:247:6
shift exponent 4294967295 is too large for 64-bit type 'long long unsigned int'

So, allow the leader code to send a pulse and space and remove the unused
pulse_space_start field.

Cc: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The ioctl change the current mode or return the current mode; they
do not tell you which modes are possible (use the lirc features
ioctl for that).
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Since commit 9b619258 ("media: lirc: implement scancode sending"),
and commit de142c32 ("media: lirc: implement reading scancode")
the lirc features ioctl for raw IR devices advertises two modes for
sending and receiving.

The lirc daemon now fails to detect a raw IR device, both for transmit
and receive.

To fix this, do not advertise the scancode mode in the lirc features
for raw IR devices (however do keep it for scancode devices). The mode
can still be used via the LIRC_SET_{REC,SEND}_MODE ioctl.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Since commit a60d64b1 ("media: lirc: lirc interface should not be
a raw decoder"), there is no lirc_dev module any more. On Ubuntu 16.10,
the /etc/init.d/lirc startup script attempts to load the lirc_dev module.

Since this module does not exist any more, this script fails. Add an alias
so the correct module is loaded.

Fixes: a60d64b1 ("media: lirc: lirc interface should not be a raw decoder")
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The current error exit path if ir_raw_encode_scancode fails is via the
label out_kfree which kfree's an uninitialized pointer txbuf. Fix this
by exiting via a new exit path that does not kfree txbuf.  Also exit
via this new exit path for a failed allocation of txbuf to avoid a
redundant kfree on a NULL pointer (to save a bunch of CPU cycles).

Detected by: CoverityScan, CID#1463070 ("Uninitialized pointer read")

Fixes: f81a8158 ("media: lirc: release lock before sleep")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add RGB565 (LE & BE) and YUV422 YUYV format in addition
to existing YUV422 UYVY format.
Signed-off-by: NHugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add support of DVP parallel mode in addition of
existing MIPI CSI mode. The choice between two modes
and configuration is made through device tree.
Signed-off-by: NHugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Refine CSI-2 endpoint documentation and add bindings
for DVP parallel interface support.
Signed-off-by: NHugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Verify that chip identifier is correct when probing.
Signed-off-by: NHugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Switch gpiod_set_value to gpiod_set_value_cansleep to avoid
warnings when powering sensor.
Signed-off-by: NHugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The mt9m111 has the test pattern generator features.  This makes use of
it through V4L2_CID_TEST_PATTERN control.

Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The mt9m111 driver requires clocks property for the master clock to the
sensor, but there is no description for that.  This adds it.

Cc: Rob Herring <robh@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Create a source pad and set the media controller type to the sensor.

Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Set the V4L2_SUBDEV_FL_HAS_DEVNODE flag for the subdevice so that the
subdevice device node is created.

Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The ov7740 (color) image sensor is a high performance VGA CMOS
image snesor, which supports for output formats: RAW RGB and YUV
and image sizes: VGA, and QVGA, CIF and any size smaller.
Signed-off-by: NSongjun Wu <songjun.wu@microchip.com>
Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>