Pull dmaengine fixes from Vinod Koul:
 "Here are hopefully last set of fixes for 4.1. This time we have:

   - fixing pause capability reporting on both dmaengine pause & resume
     support by Krzysztof

   - locking fix fir at_xdmac by Ludovic

   - slave configuration fix for at_xdmac by Ludovic"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: Fix choppy sound because of unimplemented resume
  dmaengine: at_xdmac: rework slave configuration part
  dmaengine: at_xdmac: lock fixes

Pull NTB fixes from Jon Mason:
 "I apologize for the tardiness of this request.  Here are a couple of
  last minute NTB bug fixes for v4.1:

  NTB bug fixes to address issues in unmapping the MW reg base and
  vbase, and an uninitialized variable on Atom platforms"

* tag 'ntb-4.1' of git://github.com/jonmason/ntb:
  ntb: initialize max_mw for Atom before using it
  ntb: iounmap MW reg and vbase in error path

Pull more MIPS fixes from Ralf Baechle:
 "Another round of 4.1 MIPS fixes, one fix to a MIPS-specific #if
  condition in lib/mpi, one fix to the MIPS GIC irqchip driver and one
  SSB fix.

  Details:
   - fix handling of clock in chipco SSB driver.
   - fix two MIPS-specific #if conditions to correctly work for GCC 5.1.
   - fix damage to R6 pgtable bits done by XPA support.
   - fix possible crash due to unloading modules that contain statically
     defined platform devices.
   - fix disabling of the MSA ASE on context switch to also work
     correctly when a new thread/process has the CPU for the very first
     time.

  This is part of linux-next and has been beaten to death on
  Imagination's test farm.

  While things are not looking too grim this pull request also means the
  rate of fixes for 4.1 remains nearly constant so I'd not be unhappy if
  you'd delay the release"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MPI: MIPS: Fix compilation error with GCC 5.1
  IRQCHIP: mips-gic: Don't nest calls to do_IRQ()
  MIPS: MSA: bugfix - disable MSA correctly for new threads/processes.
  MIPS: Loongson: Do not register 8250 platform device from module.
  MIPS: Cobalt: Do not build MTD platform device registration code as module.
  SSB: Fix handling of ssb_pmu_get_alp_clock()
  MIPS: pgtable-bits: Fix XPA damage to R6 definitions.

Pull irqchip fix from Thomas Gleixner:
 "A single fix for an off by one bug in the sunxi irqchip driver"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: sunxi-nmi: Fix off-by-one error in irq iterator

Pull lockdep fix from Ingo Molnar:
 "A lockdep/modules unload race fix that can oops"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep: Fix a race between /proc/lock_stat and module unload

Pull perf fixes from Ingo Molnar:
 "A regression fix for a crash, and a Intel HSW uncore PMU driver fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "perf/x86/intel/uncore: Move uncore_box_init() out of driver initialization"
  perf/x86/intel/uncore: Fix CBOX bit wide and UBOX reg on Haswell-EP

Pull sound fixes from Takashi Iwai:
 "Most of commits are regression fixes for HD-audio: a few corner case
  fixes for regmap transition, and i915 binding issues.

  In addition, a quirk for another USB-audio device supporting DSD"

* tag 'sound-4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Abort the probe without i915 binding for HSW/BDW
  ALSA: hda - Re-add the lost fake mute support
  ALSA: hda - Continue probing even if i915 binding fails
  ALSA: hda - Don't actually write registers for caps overwrites
  ALSA: hda - fix number of devices query on hotplug
  ALSA: usb-audio: add native DSD support for JLsounds I2SoverUSB

This patch fixes mips compilation error:

lib/mpi/generic_mpih-mul1.c: In function 'mpihelp_mul_1':
lib/mpi/longlong.h:651:2: error: impossible constraint in 'asm'
Signed-off-by: NJaedon Shin <jaedon.shin@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/10546/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The GIC chained handlers use do_IRQ() to call the subhandlers.  This
means that irq_enter() calls get nested, which leads to preempt count
looking like we're in nested interrupts, which in turn leads to all
system time being accounted as IRQ time in account_system_time().

Fix it by using generic_handle_irq().  Since these same functions are
used in some systems (if cpu_has_veic) from a low-level vectored
interrupt handler which does not go throught do_IRQ(), we need to do it
conditionally.
Signed-off-by: NRabin Vincent <rabin.vincent@axis.com>
Reviewed-by: NAndrew Bresticker <abrestic@chromium.org>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Patchwork: https://patchwork.linux-mips.org/patch/10545/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Pull networking fixes from David Miller:

 1) Fix uninitialized struct station_info in cfg80211_wireless_stats(),
    from Johannes Berg.

 2) Revert commit attempt to fix ipv6 protocol resubmission, it adds
    regressions.

 3) Endless loops can be created in bridge port lists, fix from Nikolay
    Aleksandrov.

 4) Don't WARN_ON() if sk->sk_forward_alloc is non-zero in
    sk_clear_memalloc, it is a legal situation during swap deactivation.
    Fix from Mel Gorman.

 5) Fix order of disabling interrupts and unlocking NAPI in enic driver
    to avoid a race.  From Govindarajulu Varadarajan.

 6) High and low register writes are swapped when programming the start
    of periodic output in igb driver.  From Richard Cochran.

 7) Fix device rename handling in mpls stack, from Robert Shearman.

 8) Do not trigger compaction synchronously when optimistically trying
    to allocate an order 3 page in alloc_skb_with_frags() and
    skb_page_frag_refill().  From Shaohua Li.

 9) Authentication with COOKIE_ECHO is not handled properly in SCTP, fix
    from Marcelo Ricardo Leitner.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  Doc: networking: Fix URL for wiki.wireshark.org in udplite.txt
  sctp: allow authenticating DATA chunks that are bundled with COOKIE_ECHO
  net: don't wait for order-3 page allocation
  mpls: handle device renames for per-device sysctls
  net: igb: fix the start time for periodic output signals
  enic: fix memory leak in rq_clean
  enic: check return value for stat dump
  enic: unlock napi busy poll before unmasking intr
  net, swap: Remove a warning and clarify why sk_mem_reclaim is required when deactivating swap
  bridge: fix multicast router rlist endless loop
  tipc: disconnect socket directly after probe failure
  Revert "ipv6: Fix protocol resubmission"
  cfg80211: wext: clear sinfo struct before calling driver

This patch fix URL (http to https) for wiki.wireshark.org.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, we can ask to authenticate DATA chunks and we can send DATA
chunks on the same packet as COOKIE_ECHO, but if you try to combine
both, the DATA chunk will be sent unauthenticated and peer won't accept
it, leading to a communication failure.

This happens because even though the data was queued after it was
requested to authenticate DATA chunks, it was also queued before we
could know that remote peer can handle authenticating, so
sctp_auth_send_cid() returns false.

The fix is whenever we set up an active key, re-check send queue for
chunks that now should be authenticated. As a result, such packet will
now contain COOKIE_ECHO + AUTH + DATA chunks, in that order.
Reported-by: NLiu Wei <weliu@redhat.com>
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NVlad Yasevich <vyasevich@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull block layer fixes from Jens Axboe:
 "Remember about a week ago when I sent the last pull request for 4.1?
  Well, I lied.  Now, I don't want to shift the blame, but Dan, Ming,
  and Richard made a liar out of me.

  Here are three small patches that should go into 4.1.  More
  specifically, this pull request contains:

   - A Kconfig dependency for the pmem block driver, so it can't be
     selected if HAS_IOMEM isn't availble.  From Richard Weinberger.

   - A fix for genhd, making the ext_devt_lock softirq safe.  This makes
     lockdep happier, since we also end up grabbing this lock on release
     off the softirq path.  From Dan Williams.

   - A blk-mq software queue release fix from Ming Lei.

  Last two are headed to stable, first fixes an issue introduced in this
  cycle"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: pmem: Add dependency on HAS_IOMEM
  block: fix ext_dev_lock lockdep report
  blk-mq: free hctx->ctxs in queue's release handler

Pull three more md fixes from Neil Brown:
 "Hasn't been a good cycle for md has it :-(

  The main issue fixed here is a rare race which can result in two
  reshape threads running at once, which doesn't end well.

  Also a minor issue with a write to a sysfs file returning the wrong
  value.  Backports to 4.0-stable are indicated"

* tag 'md/4.1-rc7-fixes' of git://neil.brown.name/md:
  md: make sure MD_RECOVERY_DONE is clear before starting recovery/resync
  md: Close race when setting 'action' to 'idle'.
  md: don't return 0 from array_state_store

Pull VT-d hardware workarounds from David Woodhouse:
 "This contains a workaround for hardware issues which I *thought* were
  never going to be seen on production hardware.  I'm glad I checked
  that before the 4.1 release...

  Firstly, PASID support is so broken on existing chips that we're just
  going to declare the old capability bit 28 as 'reserved' and change
  the VT-d spec to move PASID support to another bit.  So any existing
  hardware doesn't support SVM; it only sets that (now) meaningless bit
  28.

  That patch *wasn't* imperative for 4.1 because we don't have PASID
  support yet.  But *even* the extended context tables are broken — if
  you just enable the wider tables and use none of the new bits in them,
  which is precisely what 4.1 does, you find that translations don't
  work.  It's this problem which I thought was caught in time to be
  fixed before production, but wasn't.

  To avoid triggering this issue, we now *only* enable the extended
  context tables on hardware which also advertises "we have PASID
  support and we actually tested it this time" with the new PASID
  feature bit.

  In addition, I've added an 'intel_iommu=ecs_off' command line
  parameter to allow us to disable it manually if we need to"

* git://git.infradead.org/intel-iommu:
  iommu/vt-d: Only enable extended context tables if PASID is supported
  iommu/vt-d: Change PASID support to bit 40 of Extended Capability Register

Although the extended tables are theoretically a completely orthogonal
feature to PASID and anything else that *uses* the newly-available bits,
some of the early hardware has problems even when all we do is enable
them and use only the same bits that were in the old context tables.

For now, there's no motivation to support extended tables unless we're
going to use PASID support to do SVM. So just don't use them unless
PASID support is advertised too. Also add a command-line bailout just in
case later chips also have issues.

The equivalent problem for PASID support has already been fixed with the
upcoming VT-d spec update and commit bd00c606 ("iommu/vt-d: Change
PASID support to bit 40 of Extended Capability Register"), because the
problematic platforms use the old definition of the PASID-capable bit,
which is now marked as reserved and meaningless.

So with this change, we'll magically start using ECS again only when we
see the new hardware advertising "hey, we have PASID support and we
actually tested it this time" on bit 40.

The VT-d hardware architect has promised that we are not going to have
any reason to support ECS *without* PASID any time soon, and he'll make
sure he checks with us before changing that.

In the future, if hypothetical new features also use new bits in the
context tables and can be seen on implementations *without* PASID support,
we might need to add their feature bits to the ecs_enabled() macro.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

MD_RECOVERY_DONE is normally cleared by md_check_recovery after a
resync etc finished.  However it is possible for raid5_start_reshape
to race and start a reshape before MD_RECOVERY_DONE is cleared.  This
can lean to multiple reshapes running at the same time, which isn't
good.

To make sure it is cleared before starting a reshape, and also clear
it when reaping a thread, just to be safe.
Signed-off-by: NNeilBrown  <neilb@suse.de>

Checking ->sync_thread without holding the mddev_lock()
isn't really safe, even after flushing the workqueue which
ensures md_start_sync() has been run.

While this code is waiting for the lock, md_check_recovery could reap
the thread itself, and then start another thread (e.g. recovery might
finish, then reshape starts).  When this thread gets the lock
md_start_sync() hasn't run so it doesn't get reaped, but
MD_RECOVERY_RUNNING gets cleared.  This allows two threads to start
which leads to confusion.

So don't both if MD_RECOVERY_RUNNING isn't set, but if it is do
the flush and the test and the reap all under the mddev_lock to
avoid any race with md_check_recovery.
Signed-off-by: NNeilBrown <neilb@suse.de>
Fixes: 6791875e ("md: make reconfig_mutex optional for writes to md sysfs files.")
Cc: stable@vger.kernel.org (v4.0+)

Returning zero from a 'store' function is bad.
The return value should be either len length of the string
or an error.

So use 'len' if 'err' is zero.

Fixes: 6791875e ("md: make reconfig_mutex optional for writes to md sysfs files.")
Signed-off-by: NNeilBrown <neilb@suse.de>
Cc: stable@vger.kernel (v4.0+)

Some drivers implement only pause operation (no resuming). Example is
pl330 where pause is needed for getting residuum. pl330 does not support
resume operation, transfer must be stopped after pause.

However for slaves this is exposed always as "pause and resume" which
introduces subtle errors on Odroid U3 board (Exynos4412 with pl330).
After adding pause function to pl330 driver the audio playback
(utilizing DMA) gets choppy after some time (approximately 24 hours).

Fix this by exposing "cmd_pause" if and only if pause and resume are
implemented.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reported-by: gabriel@unseen.is
Reported-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Cc: <stable@vger.kernel.org>
Fixes: 88987d2c ("dmaengine: pl330: add DMA_PAUSE feature")
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The previous patch tried to continue the probe if i915 binding fails.
For for simplicity reason, we haven't implemented abort even for
controller chips that are dedicated for HDMI/DP on HSW and BDW.
However, Mengdong suggested that this can be dangerous; BIOS may
disable gfx power well although the PCI entry for HD-audio is left,
and this may result in the unexpected behavior, kernel errors, etc.

For avoiding this situation, abort the probe at i915 binding failure
only for HSW/BDW chips selectively.  For other chips, it still
continues.

Fixes: bf06848b ('ALSA: hda - Continue probing even if i915 binding fails')
Reported-by: NMengdong Lin <mengdong.lin@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Pull drm fixes from Dave Airlie:
 "i915 and radeon fixes:

  i915:
      fix for connector oops regression
      DDC probing fix

  radeon:
      two radeon reverts, along with a freeze workaround and a fix"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: Make sure radeon_vm_bo_set_addr always unreserves the BO
  Revert "drm/radeon: adjust pll when audio is not enabled"
  Revert "drm/radeon: don't share plls if monitors differ in audio support"
  drm/radeon: fix freeze for laptop with Turks/Thames GPU.
  drm/i915: Fix DDC probe for passive adapters
  drm/i915: Properly initialize SDVO analog connectors

We saw excessive direct memory compaction triggered by skb_page_frag_refill.
This causes performance issues and add latency. Commit 5640f768
introduces the order-3 allocation. According to the changelog, the order-3
allocation isn't a must-have but to improve performance. But direct memory
compaction has high overhead. The benefit of order-3 allocation can't
compensate the overhead of direct memory compaction.

This patch makes the order-3 page allocation atomic. If there is no memory
pressure and memory isn't fragmented, the alloction will still success, so we
don't sacrifice the order-3 benefit here. If the atomic allocation fails,
direct memory compaction will not be triggered, skb_page_frag_refill will
fallback to order-0 immediately, hence the direct memory compaction overhead is
avoided. In the allocation failure case, kswapd is waken up and doing
compaction, so chances are allocation could success next time.

alloc_skb_with_frags is the same.

The mellanox driver does similar thing, if this is accepted, we must fix
the driver too.

V3: fix the same issue in alloc_skb_with_frags as pointed out by Eric
V2: make the changelog clearer

Cc: Eric Dumazet <edumazet@google.com>
Cc: Chris Mason <clm@fb.com>
Cc: Debabrata Banerjee <dbavatar@gmail.com>
Signed-off-by: NShaohua Li <shli@fb.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix for the regression Linus called out, and another for probing
dongles.

* tag 'drm-intel-fixes-2015-06-11' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Fix DDC probe for passive adapters
  drm/i915: Properly initialize SDVO analog connectors

Two regression reverts, and two fixes, one for a dpm boot freeze.

* 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: Make sure radeon_vm_bo_set_addr always unreserves the BO
  Revert "drm/radeon: adjust pll when audio is not enabled"
  Revert "drm/radeon: don't share plls if monitors differ in audio support"
  drm/radeon: fix freeze for laptop with Turks/Thames GPU.

If a device is renamed and the original name is subsequently reused
for a new device, the following warning is generated:

sysctl duplicate entry: /net/mpls/conf/veth0//input
CPU: 3 PID: 1379 Comm: ip Not tainted 4.1.0-rc4+ #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
 0000000000000000 0000000000000000 ffffffff81566aaf 0000000000000000
 ffffffff81236279 ffff88002f7d7f00 0000000000000000 ffff88000db336d8
 ffff88000db33698 0000000000000005 ffff88002e046000 ffff8800168c9280
Call Trace:
 [<ffffffff81566aaf>] ? dump_stack+0x40/0x50
 [<ffffffff81236279>] ? __register_sysctl_table+0x289/0x5a0
 [<ffffffffa051a24f>] ? mpls_dev_notify+0x1ff/0x300 [mpls_router]
 [<ffffffff8108db7f>] ? notifier_call_chain+0x4f/0x70
 [<ffffffff81470e72>] ? register_netdevice+0x2b2/0x480
 [<ffffffffa0524748>] ? veth_newlink+0x178/0x2d3 [veth]
 [<ffffffff8147f84c>] ? rtnl_newlink+0x73c/0x8e0
 [<ffffffff8147f27a>] ? rtnl_newlink+0x16a/0x8e0
 [<ffffffff81459ff2>] ? __kmalloc_reserve.isra.30+0x32/0x90
 [<ffffffff8147ccfd>] ? rtnetlink_rcv_msg+0x8d/0x250
 [<ffffffff8145b027>] ? __alloc_skb+0x47/0x1f0
 [<ffffffff8149badb>] ? __netlink_lookup+0xab/0xe0
 [<ffffffff8147cc70>] ? rtnetlink_rcv+0x30/0x30
 [<ffffffff8149e7a0>] ? netlink_rcv_skb+0xb0/0xd0
 [<ffffffff8147cc64>] ? rtnetlink_rcv+0x24/0x30
 [<ffffffff8149df17>] ? netlink_unicast+0x107/0x1a0
 [<ffffffff8149e4be>] ? netlink_sendmsg+0x50e/0x630
 [<ffffffff8145209c>] ? sock_sendmsg+0x3c/0x50
 [<ffffffff81452beb>] ? ___sys_sendmsg+0x27b/0x290
 [<ffffffff811bd258>] ? mem_cgroup_try_charge+0x88/0x110
 [<ffffffff811bd5b6>] ? mem_cgroup_commit_charge+0x56/0xa0
 [<ffffffff811d7700>] ? do_filp_open+0x30/0xa0
 [<ffffffff8145336e>] ? __sys_sendmsg+0x3e/0x80
 [<ffffffff8156c3f2>] ? system_call_fastpath+0x16/0x75

Fix this by unregistering the previous sysctl table (registered for
the path containing the original device name) and re-registering the
table for the path containing the new device name.

Fixes: 37bde799 ("mpls: Per-device enabling of packet input")
Reported-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NRobert Shearman <rshearma@brocade.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When programming the start of a periodic output, the code wrongly places
the seconds value into the "low" register and the nanoseconds into the
"high" register.  Even though this is backwards, it slipped through my
testing, because the re-arming code in the interrupt service routine is
correct, and the signal does appear starting with the second edge.

This patch fixes the issue by programming the registers correctly.
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Reviewed-by: NJacob Keller <jacob.e.keller@intel.com>
Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Not all architectures have io memory.

Fixes:
drivers/block/pmem.c: In function ‘pmem_alloc’:
drivers/block/pmem.c:146:2: error: implicit declaration of function ‘ioremap_nocache’ [-Werror=implicit-function-declaration]
  pmem->virt_addr = ioremap_nocache(pmem->phys_addr, pmem->size);
  ^
drivers/block/pmem.c:146:18: warning: assignment makes pointer from integer without a cast [enabled by default]
  pmem->virt_addr = ioremap_nocache(pmem->phys_addr, pmem->size);
                  ^
drivers/block/pmem.c:182:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration]
  iounmap(pmem->virt_addr);
  ^
Signed-off-by: NRichard Weinberger <richard@nod.at>
Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Merge tag 'trace-rb-bm-fix-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull ring buffer benchmark buglet fix from Steven Rostedt:
 "Wang Long fixed a minor bug in the module parameter for the ring
  buffer benchmark, where the produce_fifo was being ignored and the
  producer thread's priority was being set with the consumer_fifo
  parameter"

* tag 'trace-rb-bm-fix-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ring-buffer-benchmark: Fix the wrong sched_priority of producer

 =================================
 [ INFO: inconsistent lock state ]
 4.1.0-rc7+ #217 Tainted: G           O
 ---------------------------------
 inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
 swapper/6/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
  (ext_devt_lock){+.?...}, at: [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70
 {SOFTIRQ-ON-W} state was registered at:
   [<ffffffff810bf6b1>] __lock_acquire+0x461/0x1e70
   [<ffffffff810c1947>] lock_acquire+0xb7/0x290
   [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50
   [<ffffffff8143a07d>] blk_alloc_devt+0x6d/0xd0  <-- take the lock in process context
[..]
  [<ffffffff810bf64e>] __lock_acquire+0x3fe/0x1e70
  [<ffffffff810c00ad>] ? __lock_acquire+0xe5d/0x1e70
  [<ffffffff810c1947>] lock_acquire+0xb7/0x290
  [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70
  [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50
  [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70
  [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70    <-- take the lock in softirq
  [<ffffffff8143bfec>] part_release+0x1c/0x50
  [<ffffffff8158edf6>] device_release+0x36/0xb0
  [<ffffffff8145ac2b>] kobject_cleanup+0x7b/0x1a0
  [<ffffffff8145aad0>] kobject_put+0x30/0x70
  [<ffffffff8158f147>] put_device+0x17/0x20
  [<ffffffff8143c29c>] delete_partition_rcu_cb+0x16c/0x180
  [<ffffffff8143c130>] ? read_dev_sector+0xa0/0xa0
  [<ffffffff810e0e0f>] rcu_process_callbacks+0x2ff/0xa90
  [<ffffffff810e0dcf>] ? rcu_process_callbacks+0x2bf/0xa90
  [<ffffffff81067e2e>] __do_softirq+0xde/0x600

Neil sees this in his tests and it also triggers on pmem driver unbind
for the libnvdimm tests.  This fix is on top of an initial fix by Keith
for incorrect usage of mutex_lock() in this path: 2da78092 "block:
Fix dev_t minor allocation lifetime".  Both this and 2da78092 are
candidates for -stable.

Fixes: 2da78092 ("block: Fix dev_t minor allocation lifetime")
Cc: <stable@vger.kernel.org>
Cc: Keith Busch <keith.busch@intel.com>
Reported-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Some error paths didn't unreserve the BO. This resulted in a deadlock
down the road on the next attempt to reserve the (still reserved) BO.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90873
Cc: stable@vger.kernel.org
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 7fe04d6f.

Fixes some systems at the expense of others.  Need to properly
fix the pll divider selection.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=99651

Cc: stable@vger.kernel.org

This reverts commit a10f0df0.

Fixes some systems at the expense of others.  Need to properly
fix the pll divider selection.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=99651

Cc: stable@vger.kernel.org

Laptop with Turks/Thames GPU will freeze if dpm is enabled. It seems
the SMC engine is relying on some state inside the CP engine. CP needs
to chew at least one packet for it to get in good state for dynamic
power management.

This patch simply disabled and re-enable DPM after the ring test which
is enough to avoid the freeze.
Signed-off-by: NJérôme Glisse <jglisse@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The producer should be used producer_fifo as its sched_priority,
so correct it.

Link: http://lkml.kernel.org/r/1433923957-67842-1-git-send-email-long.wanglong@huawei.com

Cc: stable@vger.kernel.org # 2.6.33+
Signed-off-by: NWang Long <long.wanglong@huawei.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Commit ab760a0c (ntb: Adding split BAR support for Haswell platforms)
changed ntb_device's mw from a fixed-size array into a pointer that is
allocated based on limits.max_mw; however, on Atom platforms, max_mw
is not initialized until ntb_device_setup(), which happens after the
allocation.

Fill out max_mw in ntb_atom_detect() to match ntb_xeon_detect(); this
happens before the use of max_mw in the ndev->mw allocation.

Fixes a null pointer dereference on Atom platforms with ntb hardware.

v2: fix typo (mw_max should be max_mw)
Signed-off-by: NDaniel Verkamp <daniel.verkamp@intel.com>
Acked-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

Yet another regression by the transition to regmap cache; for better
usability, we had the fake mute control using the zero amp value for
Conexant codecs, and this was forgotten in the new hda core code.

Since the bits 4-7 are unused for the amp registers (as we follow the
syntax of AMP_GET verb), the bit 4 is now used to indicate the fake
mute.  For setting this flag, snd_hda_codec_amp_update() becomes a
function from a simple macro.  The bonus is that it gained a proper
function description.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When incoming packet qualifies for rx_copybreak, we copy the data to newly
allocated skb. We do not free/unmap the original buffer. At this point driver
assumes this buffer is unallocated. When enic_rq_alloc_buf() is called for
buffer allocation, it checks if buf->os_buf is NULL. If its not NULL that means
buffer can be re-used.

When vnic_rq_clean() is called for freeing all rq buffers, and if the
rx_copybreak reused buffer falls outside the used desc, we do not free the
buffer. The following trace is observer when dma-debug is enabled.

Fix is to walk through complete ring and clean if buffer is present.

[   40.555386] ------------[ cut here ]------------
[   40.555396] WARNING: CPU: 0 PID: 491 at lib/dma-debug.c:971 dma_debug_device_change+0x188/0x1f0()
[   40.555400] pci 0000:06:00.0: DMA-API: device driver has pending DMA allocations while released from device [count=4]
               One of leaked entries details: [device address=0x00000000ff4cc040] [size=9018 bytes] [mapped with DMA_FROM_DEVICE] [mapped as single]
[   40.555402] Modules linked in: nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 dns_resolver coretemp intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw joydev mousedev gf128mul hid_generic glue_helper mgag200 usbhid ttm hid drm_kms_helper drm ablk_helper syscopyarea sysfillrect sysimgblt i2c_algo_bit i2c_core iTCO_wdt cryptd mac_hid evdev pcspkr sb_edac edac_core tpm_tis iTCO_vendor_support ipmi_si wmi tpm ipmi_msghandler shpchp lpc_ich processor acpi_power_meter hwmon button ac sch_fq_codel nfs lockd grace sunrpc fscache sd_mod ehci_pci ehci_hcd megaraid_sas usbcore scsi_mod usb_common enic(-) crc32c_generic crc32c_intel btrfs xor raid6_pq ext4 crc16 mbcache jbd2
[   40.555467] CPU: 0 PID: 491 Comm: rmmod Not tainted 4.1.0-rc7-ARCH-01305-gf59b71f #118
[   40.555469] Hardware name: Cisco Systems Inc UCSB-B200-M4/UCSB-B200-M4, BIOS B200M4.2.2.2.23.061220140128 06/12/2014
[   40.555471]  0000000000000000 00000000e2f8a5b7 ffff880275f8bc48 ffffffff8158d6f0
[   40.555474]  0000000000000000 ffff880275f8bca0 ffff880275f8bc88 ffffffff8107b04a
[   40.555477]  ffff8802734e0000 0000000000000004 ffff8804763fb3c0 ffff88027600b650
[   40.555480] Call Trace:
[   40.555488]  [<ffffffff8158d6f0>] dump_stack+0x4f/0x7b
[   40.555492]  [<ffffffff8107b04a>] warn_slowpath_common+0x8a/0xc0
[   40.555494]  [<ffffffff8107b0d5>] warn_slowpath_fmt+0x55/0x70
[   40.555498]  [<ffffffff812fa408>] dma_debug_device_change+0x188/0x1f0
[   40.555503]  [<ffffffff8109aaef>] notifier_call_chain+0x4f/0x80
[   40.555506]  [<ffffffff8109aecb>] __blocking_notifier_call_chain+0x4b/0x70
[   40.555510]  [<ffffffff8109af06>] blocking_notifier_call_chain+0x16/0x20
[   40.555514]  [<ffffffff813f8066>] __device_release_driver+0xf6/0x120
[   40.555518]  [<ffffffff813f8b08>] driver_detach+0xc8/0xd0
[   40.555523]  [<ffffffff813f7c59>] bus_remove_driver+0x59/0xe0
[   40.555527]  [<ffffffff813f93a0>] driver_unregister+0x30/0x70
[   40.555534]  [<ffffffff8131532d>] pci_unregister_driver+0x2d/0xa0
[   40.555542]  [<ffffffffa0200ec2>] enic_cleanup_module+0x10/0x14e [enic]
[   40.555547]  [<ffffffff8110158f>] SyS_delete_module+0x1cf/0x280
[   40.555551]  [<ffffffff811e284e>] ? ____fput+0xe/0x10
[   40.555554]  [<ffffffff810980ec>] ? task_work_run+0xbc/0xf0
[   40.555558]  [<ffffffff815930ee>] system_call_fastpath+0x12/0x71
[   40.555561] ---[ end trace 4988cadc77c2b236 ]---
[   40.555562] Mapped at:
[   40.555563]  [<ffffffff812fa865>] debug_dma_map_page+0x95/0x150
[   40.555566]  [<ffffffffa01f4a88>] enic_rq_alloc_buf+0x1b8/0x360 [enic]
[   40.555570]  [<ffffffffa01f7658>] enic_open+0xf8/0x820 [enic]
[   40.555574]  [<ffffffff8148d50e>] __dev_open+0xce/0x150
[   40.555579]  [<ffffffff8148d851>] __dev_change_flags+0xa1/0x170
Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>