- 10 7月, 2012 5 次提交
-
-
由 Deepak Sikri 提交于
It was observed that during multiple reboots nfs hangs. The status of receive descriptors shows that all the descriptors were in control of CPU, and none were assigned to DMA. Also the DMA status register confirmed that the Rx buffer is unavailable. This patch adds the fix for the same by adding the memory barriers to ascertain that the all instructions before enabling the Rx or Tx DMA are completed which involves the proper setting of the ownership bit in DMA descriptors. Signed-off-by: NDeepak Sikri <deepak.sikri@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Emmanuel Grumbach 提交于
When we remove a key, we put a key index which was supposed to tell the fw that we are actually removing the key. But instead the fw took that index as a valid index and messed up the SRAM of the device. This memory corruption on the device mangled the data of the SCD. The impact on the user is that SCD queue 2 got stuck after having removed keys. Reported-by: NPaul Bolle <pebolle@tiscali.nl> Cc: stable@vger.kernel.org Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
This is iwlegacy version of: commit 342bbf3f Author: Johannes Berg <johannes.berg@intel.com> Date: Sun Mar 4 08:50:46 2012 -0800 iwlwifi: always monitor for stuck queues If we only monitor while associated, the following can happen: - we're associated, and the queue stuck check runs, setting the queue "touch" time to X - we disassociate, stopping the monitoring, which leaves the time set to X - almost 2s later, we associate, and enqueue a frame - before the frame is transmitted, we monitor for stuck queues, and find the time set to X, although it is now later than X + 2000ms, so we decide that the queue is stuck and erroneously restart the device Cc: stable@vger.kernel.org Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
On rt2x00_dmastart() we increase index specified by Q_INDEX and on rt2x00_dmadone() we increase index specified by Q_INDEX_DONE. So entries between Q_INDEX_DONE and Q_INDEX are those we currently process in the hardware. Entries between Q_INDEX and Q_INDEX_DONE are those we can submit to the hardware. According to that fix rt2x00usb_kick_queue(), as we need to submit RX entries that are not processed by the hardware. It worked before only for empty queue, otherwise was broken. Note that for TX queues indexes ordering are ok. We need to kick entries that have filled skb, but was not submitted to the hardware, i.e. started from Q_INDEX_DONE and have ENTRY_DATA_PENDING bit set. From practical standpoint this fixes RX queue stall, usually reproducible in AP mode, like for example reported here: https://bugzilla.redhat.com/show_bug.cgi?id=828824Reported-and-tested-by: NFranco Miceli <fmiceli@plan.ceibal.edu.uy> Reported-and-tested-by: NTom Horsley <horsley1953@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
> *. CID 709078: Resource leak (RESOURCE_LEAK) > - drivers/net/wireless/mwifiex/cfg80211.c, line: 935 > Assigning: "bss_cfg" = storage returned from "kzalloc(132UL, 208U)" > - but was not free > drivers/net/wireless/mwifiex/cfg80211.c:935 Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 09 7月, 2012 6 次提交
-
-
由 Michael Chan 提交于
commit c0357e97 bnx2: stop using net_device.{base_addr, irq}. removed netdev->base_addr so we need to update cnic to get the MMIO base address from pci_resource_start(). Otherwise, mmap of the uio device will fail. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bjørn Mork 提交于
Adding a device with limited QMI support. It does not support normal QMI_WDS commands for connection management. Instead, sending a QMI_CTL SET_INSTANCE_ID command is required to enable the network interface: 01 0f 00 00 00 00 00 00 20 00 04 00 01 01 00 00 A number of QMI_DMS and QMI_NAS commands are also supported for optional device management. Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Daney 提交于
With lockdep enabled we get: ============================================= [ INFO: possible recursive locking detected ] 3.4.4-Cavium-Octeon+ #313 Not tainted --------------------------------------------- kworker/u:1/36 is trying to acquire lock: (&bus->mdio_lock){+.+...}, at: [<ffffffff813da7e8>] mdio_mux_read+0x38/0xa0 but task is already holding lock: (&bus->mdio_lock){+.+...}, at: [<ffffffff813d79e4>] mdiobus_read+0x44/0x88 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&bus->mdio_lock); lock(&bus->mdio_lock); *** DEADLOCK *** May be due to missing lock nesting notation . . . This is a false positive, since we are indeed using 'nested' locking, we need to use mutex_lock_nested(). Now in theory we can stack multiple MDIO multiplexers, but that would require passing the nesting level (which is difficult to know) to mutex_lock_nested(). Instead we assume the simple case of a single level of nesting. Since these are only warning messages, it isn't so important to solve the general case. Signed-off-by: NDavid Daney <david.daney@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
DCB and SR-IOV cannot currently be enabled at the same time as the queueing schemes are incompatible. If they are both enabled it will result in Tx hangs since only the first Tx queue will be able to transmit any traffic. This simple fix for this is to block us from enabling TCs in ixgbe_setup_tc if SR-IOV is enabled. This change will be reverted once we can support SR-IOV and DCB coexistence. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cloud Ren 提交于
some people report atl1c could cause system hang with following kernel trace info: --------------------------------------- WARNING: at.../net/sched/sch_generic.c:258 dev_watchdog+0x1db/0x1d0() ... NETDEV WATCHDOG: eth0 (atl1c): transmit queue 0 timed out ... --------------------------------------- This is caused by netif_stop_queue calling when cable Link is down. So remove netif_stop_queue, because link_watch will take it over. Signed-off-by: Nxiong <xiong@qca.qualcomm.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NCloud Ren <cjren@qca.qualcomm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
commit a1c7fff7 (net: netdev_alloc_skb() use build_skb()) broke b44 on some 64bit machines. It appears b44 and b43 use __netdev_alloc_skb() instead of alloc_skb() for their bounce buffers. There is no need to add an extra NET_SKB_PAD reservation for bounce buffers : - In TX path, NET_SKB_PAD is useless - In RX path in b44, we force a copy of incoming frames if GFP_DMA allocations were needed. Reported-and-bisected-by: NStefan Bader <stefan.bader@canonical.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 7月, 2012 2 次提交
-
-
由 Bruce Allan 提交于
Currently only used when packet split mode is enabled with jumbo frames, IP payload checksum (for fragmented UDP packets) is mutually exclusive with receive hashing offload since the hardware uses the same space in the receive descriptor for the hardware-provided packet checksum and the RSS hash, respectively. Users currently must disable jumbos when receive hashing offload is enabled, or vice versa, because of this incompatibility. Since testing has shown that IP payload checksum does not provide any real benefit, just remove it so that there is no longer a choice between jumbos or receive hashing offload but not both as done in other Intel GbE drivers (e.g. e1000, igb). Also, add a missing check for IP checksum error reported by the hardware; let the stack verify the checksum when this happens. CC: stable <stable@vger.kernel.org> [3.4] Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitch A Williams 提交于
Using ethtool -C ethX rx-usecs 0 crashes with a divide by zero. Refactor this function to fix this issue and make it more clear what the intent of each conditional is. Add comment regarding using a setting of zero. CC: stable <stable@vger.kernel.org> [3.3+] CC: David Ahern <daahern@cisco.com> Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 6月, 2012 3 次提交
-
-
由 Daniel Mack 提交于
This fixes a number of warnings such as: CC drivers/net/ethernet/ti/davinci_cpdma.o drivers/net/ethernet/ti/davinci_cpdma.c:279:1: warning: data definition has no type or storage class drivers/net/ethernet/ti/davinci_cpdma.c:279:1: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL_GPL’ drivers/net/ethernet/ti/davinci_cpdma.c:279:1: warning: parameter names (without types) in function declaration Signed-off-by: NDaniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Cc: David S. Miller <davem@davemloft.net> Cc: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Claudiu Manoil 提交于
The correct behavior is to program the interrupt coalescing regs (RXICr/TXICr) in accordance with the Rx/Tx Q's "rx/txcoalescing" flag. That is, if the coalescing flag is 0 for a given Rx/Tx queue then the corresponding coalescing register should be cleared. This behavior is correctly implemented for the single-queue mode (SQ_SG_MODE), but not for the multi-queue mode (MQ_MG_MODE). This fixes the later case. Signed-off-by: NClaudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bjørn Mork 提交于
usbnet_disconnect() will set intfdata to NULL before calling the minidriver unbind function. The cdc_wdm subdriver cannot know that it is disconnecting until the qmi_wwan unbind function has called its disconnect function. This means that we must be able to support the cdc_wdm subdriver operating normally while usbnet_disconnect() is running, and in particular that intfdata may be NULL. The only place this matters is in qmi_wwan_cdc_wdm_manage_power which is called from cdc_wdm. Simply testing for NULL intfdata there is sufficient to allow it to continue working at all times. Fixes this Oops where a cdc-wdm device was closed while the USB device was disconnecting, causing wdm_release to call qmi_wwan_cdc_wdm_manage_power after intfdata was set to NULL by usbnet_disconnect: [41819.087460] BUG: unable to handle kernel NULL pointer dereference at 00000080 [41819.087815] IP: [<f8640458>] qmi_wwan_manage_power+0x68/0x90 [qmi_wwan] [41819.088028] *pdpt = 000000000314f001 *pde = 0000000000000000 [41819.088028] Oops: 0002 [#1] SMP [41819.088028] Modules linked in: qmi_wwan option usb_wwan usbserial usbnet cdc_wdm nls_iso8859_1 nls_cp437 vfat fat usb_storage bnep rfcomm bluetooth parport_pc ppdev binfmt_misc iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_mangle iptable_filter ip_tables x_tables dm_crypt uvcvideo snd_hda_codec_realtek snd_hda_intel videobuf2_core snd_hda_codec joydev videodev videobuf2_vmalloc hid_multitouch snd_hwdep arc4 videobuf2_memops snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event ath9k mac80211 snd_seq ath9k_common ath9k_hw ath snd_timer snd_seq_device sparse_keymap dm_multipath scsi_dh coretemp mac_hid snd soundcore cfg80211 snd_page_alloc psmouse serio_raw microcode lp parport dm_mirror dm_region_hash dm_log usbhid hid i915 drm_kms_helper drm r8169 i2c_algo_bit wmi video [last unloaded: qmi_wwan] [41819.088028] [41819.088028] Pid: 23292, comm: qmicli Not tainted 3.4.0-5-generic #11-Ubuntu GIGABYTE T1005/T1005 [41819.088028] EIP: 0060:[<f8640458>] EFLAGS: 00010246 CPU: 1 [41819.088028] EIP is at qmi_wwan_manage_power+0x68/0x90 [qmi_wwan] [41819.088028] EAX: 00000000 EBX: 00000000 ECX: 000000c3 EDX: 00000000 [41819.088028] ESI: c3b27658 EDI: 00000000 EBP: c298bea4 ESP: c298be98 [41819.088028] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [41819.088028] CR0: 8005003b CR2: 00000080 CR3: 3605e000 CR4: 000007f0 [41819.088028] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [41819.088028] DR6: ffff0ff0 DR7: 00000400 [41819.088028] Process qmicli (pid: 23292, ti=c298a000 task=f343b280 task.ti=c298a000) [41819.088028] Stack: [41819.088028] 00000000 c3b27658 e2a80d00 c298beb0 f864051a c3b27600 c298bec0 f9027099 [41819.088028] c2fd6000 00000008 c298bef0 c1147f96 00000001 00000000 00000000 f4e54790 [41819.088028] ecf43a00 ecf43a00 c2fd6008 c2fd6000 ebbd7600 ffffffb9 c298bf08 c1144474 [41819.088028] Call Trace: [41819.088028] [<f864051a>] qmi_wwan_cdc_wdm_manage_power+0x1a/0x20 [qmi_wwan] [41819.088028] [<f9027099>] wdm_release+0x69/0x70 [cdc_wdm] [41819.088028] [<c1147f96>] fput+0xe6/0x210 [41819.088028] [<c1144474>] filp_close+0x54/0x80 [41819.088028] [<c1046a65>] put_files_struct+0x75/0xc0 [41819.088028] [<c1046b56>] exit_files+0x46/0x60 [41819.088028] [<c1046f81>] do_exit+0x141/0x780 [41819.088028] [<c107248f>] ? wake_up_state+0xf/0x20 [41819.088028] [<c1053f48>] ? signal_wake_up+0x28/0x40 [41819.088028] [<c1054f3b>] ? zap_other_threads+0x6b/0x80 [41819.088028] [<c1047864>] do_group_exit+0x34/0xa0 [41819.088028] [<c10478e8>] sys_exit_group+0x18/0x20 [41819.088028] [<c15bb7df>] sysenter_do_call+0x12/0x28 [41819.088028] Code: 04 83 e7 01 c1 e7 03 0f b6 42 18 83 e0 f7 09 f8 88 42 18 8b 43 04 e8 48 9a dd c8 89 f0 8b 5d f4 8b 75 f8 8b 7d fc 89 ec 5d c3 90 <f0> ff 88 80 00 00 00 0f 94 c0 84 c0 75 b7 31 f6 8b 5d f4 89 f0 [41819.088028] EIP: [<f8640458>] qmi_wwan_manage_power+0x68/0x90 [qmi_wwan] SS:ESP 0068:c298be98 [41819.088028] CR2: 0000000000000080 [41819.149492] ---[ end trace 0944479ff8257f55 ]--- Reported-by: NMarius Bjørnstad Kotsbak <marius.kotsbak@gmail.com> Cc: <stable@vger.kernel.org> # v3.4 Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 6月, 2012 4 次提交
-
-
由 Avinash Patil 提交于
Free ap_custom_ie before return from function. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tom Hughes 提交于
Commit 3a2923e8 introduced a bug when a corrupt descriptor is encountered - although the following descriptor is discarded and returned to the queue for reuse the associated frame is also returned for processing. This leads to a panic: BUG: unable to handle kernel NULL pointer dereference at 000000000000003a IP: [<ffffffffa02599a5>] ath_rx_tasklet+0x165/0x1b00 [ath9k] Call Trace: <IRQ> [<ffffffff812d7fa0>] ? map_single+0x60/0x60 [<ffffffffa028f044>] ? ath9k_ioread32+0x34/0x90 [ath9k] [<ffffffffa0292eec>] athk9k_tasklet+0xdc/0x160 [ath9k] [<ffffffff8105e133>] tasklet_action+0x63/0xd0 [<ffffffff8105dbc0>] __do_softirq+0xc0/0x1e0 [<ffffffff8101a873>] ? native_sched_clock+0x13/0x80 [<ffffffff815f9d5c>] call_softirq+0x1c/0x30 [<ffffffff810151f5>] do_softirq+0x75/0xb0 [<ffffffff8105df95>] irq_exit+0xb5/0xc0 [<ffffffff815fa5b3>] do_IRQ+0x63/0xe0 [<ffffffff815f0cea>] common_interrupt+0x6a/0x6a <EOI> [<ffffffff8131840a>] ? intel_idle+0xea/0x150 [<ffffffff813183eb>] ? intel_idle+0xcb/0x150 [<ffffffff814a1db9>] cpuidle_enter+0x19/0x20 [<ffffffff814a23d9>] cpuidle_idle_call+0xa9/0x240 [<ffffffff8101c4bf>] cpu_idle+0xaf/0x120 [<ffffffff815cda8e>] rest_init+0x72/0x74 [<ffffffff81cf4c1a>] start_kernel+0x3b7/0x3c4 [<ffffffff81cf4662>] ? repair_env_string+0x5e/0x5e [<ffffffff81cf4346>] x86_64_start_reservations+0x131/0x135 [<ffffffff81cf444a>] x86_64_start_kernel+0x100/0x10f Making sure bf is cleared to NULL in this case restores the old behaviour. Signed-off-by: NTom Hughes <tom@compton.nu> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Panayiotis Karabassis 提交于
https://bugzilla.kernel.org/show_bug.cgi?id=42903 Based on the work of <fynivx@gmail.com> Signed-off-by: NPanayiotis Karabassis <panayk@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
The latest Realtek driver for the RTL8188CU and RTL8192CU chips adds three new USB IDs. Reported-by: NXose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 27 6月, 2012 3 次提交
-
-
由 Hui Wang 提交于
The freescale arm i.MX series platform can support this driver, and usually the arm cpu works in the little endian mode by default, while device tree entry value is stored in big endian format, we should use be32_to_cpup() to handle them, after modification, it can work well both on the le cpu and be cpu. Cc: stable <stable@vger.kernel.org> # v3.2+ Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: NHui Wang <jason77.wang@gmail.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Ian Campbell 提交于
Fixes: [ 15.470311] WARNING: at /local/scratch/ianc/devel/kernels/linux/fs/sysfs/file.c:498 sysfs_attr_ns+0x95/0xa0() [ 15.470326] sysfs: kobject eth0 without dirent [ 15.470333] Modules linked in: [ 15.470342] Pid: 12, comm: xenwatch Not tainted 3.4.0-x86_32p-xenU #93 and [ 9.150554] BUG: unable to handle kernel paging request at 2b359000 [ 9.150577] IP: [<c1279561>] linkwatch_do_dev+0x81/0xc0 [ 9.150592] *pdpt = 000000002c3c9027 *pde = 0000000000000000 [ 9.150604] Oops: 0002 [#1] SMP [ 9.150613] Modules linked in: This is http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675190Reported-by: NGeorge Shuklin <george.shuklin@gmail.com> Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Tested-by: NWilliam Dauchy <wdauchy@gmail.com> Cc: stable@kernel.org Cc: 675190@bugs.debian.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
FCoE target mode was experiencing issues due to the fact that we were sending up data frames that were padded to 60 bytes after the DDP logic had already stripped the frame down to 52 or 56 depending on the use of VLANs. This was resulting in the FCoE DDP logic having issues since it thought the frame still had data in it due to the padding. To resolve this, adding code so that we do not pad FCoE frames prior to handling them to the stack. CC: <stable@vger.kernel.org> Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 6月, 2012 9 次提交
-
-
由 Yevgeny Petrilin 提交于
Add a missing resource release in ring cleanup. Not doing this leaves a range of QPs that are being reserved, and no one can use them. Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
Fix a crash at the error flow of NOP command which caused the driver to try and use a completion vector which wasn't allocated. Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
Set valid port parameters: MTU and flow control configuration when configuring the port during HW device initialization, prior to the net device open() being called. Using invalid parameters (such as all zeros) could lead to bad firmware behavior. Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Davide Gerhard 提交于
This adds support for the iPad to the ipheth driver. (product id = 0x129a) Signed-off-by: NDavide Gerhard <rainbow@irh.it> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sjur Brændeland 提交于
Fix a missing return, causing access to freed memory. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Per Ellefsen 提交于
When receiving a piggyback'ed descriptor containing an embedded frame, but no payload, the embedded frame was lost. Signed-off-by: NPer Ellefsen <per.ellefsen@stericsson.com> Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
When authentication/association timed out, the driver would complain bitterly, printing the message ACTIVATE a non DRIVER active station id ... addr ... The cause turns out to be that when the AP station is added but we don't associate, the IWL_STA_UCODE_INPROGRESS is set but never cleared. This then causes iwl_restore_stations() to attempt to resend it because it uses the flag internally and uploads even if it didn't set it itself. To fix this issue and not upload the station again when it has already been removed by mac80211, clear the flag after adding it in case we add it only for association. Cc: stable@vger.kernel.org Reviewed-by: NMeenakshi Venkataraman <meenakshi.venkataraman@intel.com> Reviewed-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Randy Dunlap 提交于
Mainline build reports: warning: (WL12XX) selects WLCORE which has unmet direct dependencies (NETDEVICES && WLAN && WL_TI && GENERIC_HARDIRQS && MAC80211 && INET) The INET dependency was added in commit 3c6af5b5: wl1271_main.c:(.text+0x271052): undefined reference to `unregister_inetaddr_ notifier' wl1271_main.c:(.text+0x2714d7): undefined reference to `register_inetaddr_no tifier' Driver is doing some filtering based on IP addresses... but this driver no longer has that code and it builds fine even when CONFIG_INET is not enabled, so drop that dependency and eliminate the kconfig warning message. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Luciano Coelho <luciano.coelho@nokia.com> Cc: John W. Linville <linville@tuxdriver.com> Acked-by: NLuciano Coelho <coelho@ti.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
commit 7a532fe7 ath9k_hw: fix interpretation of the rx KeyMiss flag This commit used the rx key miss indication to detect packets that were passed from the hardware without being decrypted, however it seems that this bit is not only undefined in the static WEP case, but also for dynamically allocated WEP keys. This caused a regression when using WEP-LEAP. This patch fixes the regression by keeping track of which key indexes refer to CCMP keys and only using the key miss indication for those. Reported-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 25 6月, 2012 1 次提交
-
-
由 Anatol Pomozov 提交于
Coult -> Could Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 6月, 2012 7 次提交
-
-
由 Yoshihiro Shimoda 提交于
The following commit couldn't work if the RMCR is not set to 1. "net: sh_eth: fix the rxdesc pointer when rx descriptor empty happens" commit id 79fba9f5 If RMCR is not set, the controller will clear the EDRRR after it received a frame. In this case, the driver doesn't need to fix the value of cur_rx/dirty_rx. The driver only needs it when the controll detects receive descriptors are empty. Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 françois romieu 提交于
The 8168evl (RTL_GIGA_MAC_VER_34) based Gigabyte GA-990FXA motherboards are very prone to NETDEV watchdog problems without this change. See https://bugzilla.kernel.org/show_bug.cgi?id=42899 for instance. I don't know why it *works*. It's depressingly effective though. For the record: - the problem may go along IOMMU (AMD-Vi) errors but it really looks like a red herring. - the patch sets the RX_MULTI_EN bit. If the 8168c doc is any guide, the chipset now fetches several Rx descriptors at a time. - long ago the driver ignored the RX_MULTI_EN bit. e542a226 changed the RxConfig settings. Whatever the problem it's now labeled a regression. - Realtek's own driver can identify two different 8168evl devices (CFG_METHOD_16 and CFG_METHOD_17) where the r8169 driver only sees one. It sucks. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ming Lei 提交于
If usbnet is resumed by remote wakeup, generally there are some packets comming to be handled, so allocate and submit rx URBs in usbnet_resume to avoid delays introduced by tasklet. Otherwise, usbnet may have been runtime suspended before the usbnet_bh is executed to schedule Rx URBs. Without the patch, usbnet can't recieve any packets from peer in runtime suspend state if runtime PM is enabled and autosuspend_delay is set as zero. Signed-off-by: NMing Lei <ming.lei@canonical.com> Acked-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ming Lei 提交于
This patch decreases dev->suspend_count in the -EBUSY failure path of usbnet_suspend. Without the change, the later runtime suspend will do nothing except for increasing dev->suspend_count. Signed-off-by: NMing Lei <ming.lei@canonical.com> Acked-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ming Lei 提交于
Without clearing OPEN flag in failure path, runtime or system resume may submit interrupt/rx URB and start tx queue mistakenly on a interface in DOWN state. Signed-off-by: NMing Lei <ming.lei@canonical.com> Acked-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bjørn Mork 提交于
Ignoring interfaces with additional descriptors is not a reliable method for locating the correct interface on Gobi devices. There is at least one device where this method fails: https://bbs.archlinux.org/viewtopic.php?id=143506 The result is that the AT command port (interface #2) is hidden from qcserial, preventing traditional serial modem usage: [ 15.562552] qmi_wwan 4-1.6:1.0: cdc-wdm0: USB WDM device [ 15.562691] qmi_wwan 4-1.6:1.0: wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.563383] qmi_wwan: probe of 4-1.6:1.1 failed with error -22 [ 15.564189] qmi_wwan 4-1.6:1.2: cdc-wdm1: USB WDM device [ 15.564302] qmi_wwan 4-1.6:1.2: wwan1: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.564328] qmi_wwan: probe of 4-1.6:1.3 failed with error -22 [ 15.569376] qcserial 4-1.6:1.1: Qualcomm USB modem converter detected [ 15.569440] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB0 [ 15.570372] qcserial 4-1.6:1.3: Qualcomm USB modem converter detected [ 15.570430] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB1 Use static interface numbers taken from the interface map in qcserial for all Gobi devices instead: Gobi 1K USB layout: 0: serial port (doesn't respond) 1: serial port (doesn't respond) 2: AT-capable modem port 3: QMI/net Gobi 2K+ USB layout: 0: QMI/net 1: DM/DIAG (use libqcdm from ModemManager for communication) 2: AT-capable modem port 3: NMEA This should be more reliable over all, and will also prevent the noisy "probe failed" messages. The whitelisting logic is expected to be replaced by direct interface number matching in 3.6. Reported-by: NHeinrich Siebmanns (Harvey) <H.Siebmanns@t-online.de> Cc: <stable@vger.kernel.org> # v3.4: 00001880 USB: qmi_wwan: Make forced int 4 whitelist generic Cc: <stable@vger.kernel.org> # v3.4: f7142e6c USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z Cc: <stable@vger.kernel.org> # v3.4 Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amitkumar Karwar 提交于
skb allocated during initialisation is reused for receiving commands/events by USB interface. We miss to reset skb->data in failure cases. This patch takes care of it. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-