- 14 2月, 2008 1 次提交
-
-
由 Jeff Layton 提交于
The reference counting for the NFSv4 callback thread stays artificially high. When this thread comes down, it doesn't properly tear down the svc_serv, causing a memory leak. In my testing on an older kernel on x86_64, memory would leak out of the 8k kmalloc slab. So, we're leaking at least a page of memory every time the thread comes down. svc_create() creates the svc_serv with a sv_nrthreads count of 1, and then svc_create_thread() increments that count. Whenever the callback thread is started it has a sv_nrthreads count of 2. When coming down, it calls svc_exit_thread() which decrements that count and if it hits 0, it tears everything down. That never happens here since the count is always at 2 when the thread exits. The problem is that nfs_callback_up() should be calling svc_destroy() on the svc_serv on both success and failure. This is how lockd_up_proto() handles the reference counting, and doing that here fixes the leak. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 02 2月, 2008 1 次提交
-
-
由 Tom Tucker 提交于
Modify the various kernel RPC svcs to use the svc_create_xprt service. Signed-off-by: NTom Tucker <tom@opengridcomputing.com> Acked-by: NNeil Brown <neilb@suse.de> Reviewed-by: NChuck Lever <chuck.lever@oracle.com> Reviewed-by: NGreg Banks <gnb@sgi.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
- 30 1月, 2008 2 次提交
-
-
由 Chuck Lever 提交于
Adjust arguments and callers of nfs_find_client() to pass a "struct sockaddr *" instead of "struct sockaddr_in *" to support non-IPv4 addresses. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Trond: Also fix up protocol version number argument in nfs_find_client() to use the correct u32 type. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: The client side peer address is available in callback_proc.c, so move a dprintk out of fs/nfs/callback.c and into fs/nfs/callback_proc.c. This is more consistent with other debugging messages, and the proc routines have more information about each request to display. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 18 7月, 2007 1 次提交
-
-
由 Rafael J. Wysocki 提交于
Currently, the freezer treats all tasks as freezable, except for the kernel threads that explicitly set the PF_NOFREEZE flag for themselves. This approach is problematic, since it requires every kernel thread to either set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't care for the freezing of tasks at all. It seems better to only require the kernel threads that want to or need to be frozen to use some freezer-related code and to remove any freezer-related code from the other (nonfreezable) kernel threads, which is done in this patch. The patch causes all kernel threads to be nonfreezable by default (ie. to have PF_NOFREEZE set by default) and introduces the set_freezable() function that should be called by the freezable kernel threads in order to unset PF_NOFREEZE. It also makes all of the currently freezable kernel threads call set_freezable(), so it shouldn't cause any (intentional) change of behaviour to appear. Additionally, it updates documentation to describe the freezing of tasks more accurately. [akpm@linux-foundation.org: build fixes] Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NNigel Cunningham <nigel@nigel.suspend2.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 2月, 2007 3 次提交
-
-
由 Chuck Lever 提交于
Expand the rq_addr field to allow it to contain larger addresses. Specifically, we replace a 'sockaddr_in' with a 'sockaddr_storage', then everywhere the 'sockaddr_in' was referenced, we use instead an accessor function (svc_addr_in) which safely casts the _storage to _in. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chuck Lever 提交于
There are loads of places where the RPC server assumes that the rq_addr fields contains an IPv4 address. Top among these are error and debugging messages that display the server's IP address. Let's refactor the address printing into a separate function that's smart enough to figure out the difference between IPv4 and IPv6 addresses. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chuck Lever 提交于
Sometimes we need to create an RPC service but not register it with the local portmapper. NFSv4 delegation callback, for example. Change the svc_makesock() API to allow optionally creating temporary or permanent sockets, optionally registering with the local portmapper, and make it return the ephemeral port of the new socket. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 10月, 2006 2 次提交
-
-
由 NeilBrown 提交于
It isn't needed as it is available in rqstp->rq_server, and dropping it allows some local vars to be dropped. [akpm@osdl.org: build fix] Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
nfsd has some cleanup that it wants to do when the last thread exits, and there will shortly be some more. So collect this all into one place and define a callback for an rpc service to call when the service is about to be destroyed. [akpm@osdl.org: cleanups, build fix] Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 9月, 2006 4 次提交
-
-
由 David Howells 提交于
Generalise the nfs_client structure by: (1) Moving nfs_client to a more general place (nfs_fs_sb.h). (2) Renaming its maintenance routines to be non-NFS4 specific. (3) Move those maintenance routines to a new non-NFS4 specific file (client.c) and move the declarations to internal.h. (4) Make nfs_find/get_client() take a full sockaddr_in to include the port number (will be required for NFS2/3). (5) Make nfs_find/get_client() take the NFS protocol version (again will be required to differentiate NFS2, 3 & 4 client records). Also: (6) Make nfs_client construction proceed akin to inodes, marking them as under construction and providing a function to indicate completion. (7) Make nfs_get_client() wait interruptibly if it finds a client that it can share, but that client is currently being constructed. (8) Make nfs4_create_client() use (6) and (7) instead of locking cl_sem. Signed-Off-By: NDavid Howells <dhowells@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 David Howells 提交于
Rename struct nfs4_client to struct nfs_client so that it can become the basis for a general client record for NFS2 and NFS3 in addition to NFS4. Signed-Off-By: NDavid Howells <dhowells@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 David Howells 提交于
Make the nfs_callback_up()/down() prototypes just do nothing if NFS4 is not enabled. Also make the down function void type since we can't really do anything if it fails. Signed-Off-By: NDavid Howells <dhowells@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 David Howells 提交于
Fix ups for the splitting of the superblock stuff out of fs/nfs/inode.c, including: (*) Move the callback tcpport module param into callback.c. (*) Move the idmap cache timeout module param into idmap.c. (*) Changes to internal.h: (*) namespace-nfs4.c was renamed to nfs4namespace.c. (*) nfs_stat_to_errno() is in nfs2xdr.c, not nfs4xdr.c. (*) nfs4xdr.c is contingent on CONFIG_NFS_V4. (*) nfs4_path() is only uses if CONFIG_NFS_V4 is set. Plus also: (*) The sec_flavours[] table should really be const. Signed-Off-By: NDavid Howells <dhowells@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 09 6月, 2006 1 次提交
-
-
由 David Howells 提交于
As fs/nfs/inode.c is rather large, heterogenous and unwieldy, the attached patch splits it up into a number of files: (*) fs/nfs/inode.c Strictly inode specific functions. (*) fs/nfs/super.c Superblock management functions for NFS and NFS4, normal access, clones and referrals. The NFS4 superblock functions _could_ move out into a separate conditionally compiled file, but it's probably not worth it as there're so many common bits. (*) fs/nfs/namespace.c Some namespace-specific functions have been moved here. (*) fs/nfs/nfs4namespace.c NFS4-specific namespace functions (this could be merged into the previous file). This file is conditionally compiled. (*) fs/nfs/internal.h Inter-file declarations, plus a few simple utility functions moved from fs/nfs/inode.c. Additionally, all the in-.c-file externs have been moved here, and those files they were moved from now includes this file. For the most part, the functions have not been changed, only some multiplexor functions have changed significantly. I've also: (*) Added some extra banner comments above some functions. (*) Rearranged the function order within the files to be more logical and better grouped (IMO), though someone may prefer a different order. (*) Reduced the number of #ifdefs in .c files. (*) Added missing __init and __exit directives. Signed-Off-By: NDavid Howells <dhowells@redhat.com>
-
- 27 3月, 2006 1 次提交
-
-
由 Ingo Molnar 提交于
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org> Cc: Robert Love <rml@tech9.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 21 3月, 2006 2 次提交
-
-
由 Trond Myklebust 提交于
If the callback daemon is signalled, but is unable to exit because it still has users, then we need to flush signals. If not, then svc_recv() can never sleep, and so we hang. If we flush signals, then we also have to be prepared to resend them when we want the thread to exit. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 07 1月, 2006 1 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 04 1月, 2006 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
To help in reducing the number of include dependencies, several files were touched as they were getting needed headers indirectly for stuff they use. Thanks also to Alan Menegotto for pointing out that net/dccp/proto.c had linux/dccp.h include twice. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 6月, 2005 1 次提交
-
-
由 Trond Myklebust 提交于
- Move NFSv4 state definitions into a private header file. - Clean up gunk in nfs_fs.h Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-