Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 19 4月, 2017 1 次提交
  3. 18 4月, 2017 3 次提交
  5. 17 4月, 2017 1 次提交
    • S
      ftrace: Fix indexing of t_hash_start() from t_next() · fcdc7125
      由 Steven Rostedt (VMware) 提交于 
      t_hash_start() does not increment *pos, where as t_next() must. But when
t_next() does increment *pos, it must still pass in the original *pos to
t_hash_start() otherwise it will skip the first instance:

 # cd /sys/kernel/debug/tracing
 # echo schedule:traceoff > set_ftrace_filter
 # echo do_IRQ:traceoff > set_ftrace_filter
 # echo call_rcu > set_ftrace_filter
 # cat set_ftrace_filter
call_rcu
schedule:traceoff:unlimited
do_IRQ:traceoff:unlimited

The above called t_hash_start() from t_start() as there was only one
function (call_rcu), but if we add another function:

 # echo xfrm_policy_destroy_rcu >> set_ftrace_filter
 # cat set_ftrace_filter
call_rcu
xfrm_policy_destroy_rcu
do_IRQ:traceoff:unlimited

The "schedule:traceoff" disappears.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      fcdc7125
  7. 16 4月, 2017 1 次提交
    • S
      ftrace: Fix removing of second function probe · acceb72e
      由 Steven Rostedt (VMware) 提交于 
      When two function probes are added to set_ftrace_filter, and then one of
them is removed, the update to the function locations is not performed, and
the record keeping of the function states are corrupted, and causes an
ftrace_bug() to occur.

This is easily reproducable by adding two probes, removing one, and then
adding it back again.

 # cd /sys/kernel/debug/tracing
 # echo schedule:traceoff > set_ftrace_filter
 # echo do_IRQ:traceoff > set_ftrace_filter
 # echo \!do_IRQ:traceoff > /debug/tracing/set_ftrace_filter
 # echo do_IRQ:traceoff > set_ftrace_filter

Causes:
 ------------[ cut here ]------------
 WARNING: CPU: 2 PID: 1098 at kernel/trace/ftrace.c:2369 ftrace_get_addr_curr+0x143/0x220
 Modules linked in: [...]
 CPU: 2 PID: 1098 Comm: bash Not tainted 4.10.0-test+ #405
 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
 Call Trace:
  dump_stack+0x68/0x9f
  __warn+0x111/0x130
  ? trace_irq_work_interrupt+0xa0/0xa0
  warn_slowpath_null+0x1d/0x20
  ftrace_get_addr_curr+0x143/0x220
  ? __fentry__+0x10/0x10
  ftrace_replace_code+0xe3/0x4f0
  ? ftrace_int3_handler+0x90/0x90
  ? printk+0x99/0xb5
  ? 0xffffffff81000000
  ftrace_modify_all_code+0x97/0x110
  arch_ftrace_update_code+0x10/0x20
  ftrace_run_update_code+0x1c/0x60
  ftrace_run_modify_code.isra.48.constprop.62+0x8e/0xd0
  register_ftrace_function_probe+0x4b6/0x590
  ? ftrace_startup+0x310/0x310
  ? debug_lockdep_rcu_enabled.part.4+0x1a/0x30
  ? update_stack_state+0x88/0x110
  ? ftrace_regex_write.isra.43.part.44+0x1d3/0x320
  ? preempt_count_sub+0x18/0xd0
  ? mutex_lock_nested+0x104/0x800
  ? ftrace_regex_write.isra.43.part.44+0x1d3/0x320
  ? __unwind_start+0x1c0/0x1c0
  ? _mutex_lock_nest_lock+0x800/0x800
  ftrace_trace_probe_callback.isra.3+0xc0/0x130
  ? func_set_flag+0xe0/0xe0
  ? __lock_acquire+0x642/0x1790
  ? __might_fault+0x1e/0x20
  ? trace_get_user+0x398/0x470
  ? strcmp+0x35/0x60
  ftrace_trace_onoff_callback+0x48/0x70
  ftrace_regex_write.isra.43.part.44+0x251/0x320
  ? match_records+0x420/0x420
  ftrace_filter_write+0x2b/0x30
  __vfs_write+0xd7/0x330
  ? do_loop_readv_writev+0x120/0x120
  ? locks_remove_posix+0x90/0x2f0
  ? do_lock_file_wait+0x160/0x160
  ? __lock_is_held+0x93/0x100
  ? rcu_read_lock_sched_held+0x5c/0xb0
  ? preempt_count_sub+0x18/0xd0
  ? __sb_start_write+0x10a/0x230
  ? vfs_write+0x222/0x240
  vfs_write+0xef/0x240
  SyS_write+0xab/0x130
  ? SyS_read+0x130/0x130
  ? trace_hardirqs_on_caller+0x182/0x280
  ? trace_hardirqs_on_thunk+0x1a/0x1c
  entry_SYSCALL_64_fastpath+0x18/0xad
 RIP: 0033:0x7fe61c157c30
 RSP: 002b:00007ffe87890258 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
 RAX: ffffffffffffffda RBX: ffffffff8114a410 RCX: 00007fe61c157c30
 RDX: 0000000000000010 RSI: 000055814798f5e0 RDI: 0000000000000001
 RBP: ffff8800c9027f98 R08: 00007fe61c422740 R09: 00007fe61ca53700
 R10: 0000000000000073 R11: 0000000000000246 R12: 0000558147a36400
 R13: 00007ffe8788f160 R14: 0000000000000024 R15: 00007ffe8788f15c
  ? trace_hardirqs_off_caller+0xc0/0x110
 ---[ end trace 99fa09b3d9869c2c ]---
 Bad trampoline accounting at: ffffffff81cc3b00 (do_IRQ+0x0/0x150)

Cc: stable@vger.kernel.org
Fixes: 59df055f ("ftrace: trace different functions with a different tracer")
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      acceb72e
  9. 11 4月, 2017 6 次提交
  11. 07 4月, 2017 1 次提交
    • S
      ftrace: Add use of synchronize_rcu_tasks() with dynamic trampolines · 0598e4f0
      由 Steven Rostedt (VMware) 提交于 
      The function tracer needs to be more careful than other subsystems when it
comes to freeing data. Especially if that data is actually executable code.
When a single function is traced, a trampoline can be dynamically allocated
which is called to jump to the function trace callback. When the callback is
no longer needed, the dynamic allocated trampoline needs to be freed. This
is where the issues arise. The dynamically allocated trampoline must not be
used again. As function tracing can trace all subsystems, including
subsystems that are used to serialize aspects of freeing (namely RCU), it
must take extra care when doing the freeing.

Before synchronize_rcu_tasks() was around, there was no way for the function
tracer to know that nothing was using the dynamically allocated trampoline
when CONFIG_PREEMPT was enabled. That's because a task could be indefinitely
preempted while sitting on the trampoline. Now with synchronize_rcu_tasks(),
it will wait till all tasks have either voluntarily scheduled (not on the
trampoline) or goes into userspace (not on the trampoline). Then it is safe
to free the trampoline even with CONFIG_PREEMPT set.
Acked-by: N"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      0598e4f0
  13. 04 4月, 2017 2 次提交
    • A
      tracing/kprobes: expose maxactive for kretprobe in kprobe_events · 696ced4f
      由 Alban Crequy 提交于 
      When a kretprobe is installed on a kernel function, there is a maximum
limit of how many calls in parallel it can catch (aka "maxactive"). A
kernel module could call register_kretprobe() and initialize maxactive
(see example in samples/kprobes/kretprobe_example.c).

But that is not exposed to userspace and it is currently not possible to
choose maxactive when writing to /sys/kernel/debug/tracing/kprobe_events

The default maxactive can be as low as 1 on single-core with a
non-preemptive kernel. This is too low and we need to increase it not
only for recursive functions, but for functions that sleep or resched.

This patch updates the format of the command that can be written to
kprobe_events so that maxactive can be optionally specified.

I need this for a bpf program attached to the kretprobe of
inet_csk_accept, which can sleep for a long time.

This patch includes a basic selftest:

> # ./ftracetest -v  test.d/kprobe/
> === Ftrace unit tests ===
> [1] Kprobe dynamic event - adding and removing	[PASS]
> [2] Kprobe dynamic event - busy event check	[PASS]
> [3] Kprobe dynamic event with arguments	[PASS]
> [4] Kprobes event arguments with types	[PASS]
> [5] Kprobe dynamic event with function tracer	[PASS]
> [6] Kretprobe dynamic event with arguments	[PASS]
> [7] Kretprobe dynamic event with maxactive	[PASS]
>
> # of passed:  7
> # of failed:  0
> # of unresolved:  0
> # of untested:  0
> # of unsupported:  0
> # of xfailed:  0
> # of undefined(test bug):  0

BugLink: https://github.com/iovisor/bcc/issues/1072
Link: http://lkml.kernel.org/r/1491215782-15490-1-git-send-email-alban@kinvolk.ioAcked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NAlban Crequy <alban@kinvolk.io>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      696ced4f
    • S
      ftrace: Have init/main.c call ftrace directly to free init memory · b80f0f6c
      由 Steven Rostedt (VMware) 提交于 
      Relying on free_reserved_area() to call ftrace to free init memory proved to
not be sufficient. The issue is that on x86, when debug_pagealloc is
enabled, the init memory is not freed, but simply set as not present. Since
ftrace was uninformed of this, starting function tracing still tries to
update pages that are not present according to the page tables, causing
ftrace to bug, as well as killing the kernel itself.

Instead of relying on free_reserved_area(), have init/main.c call ftrace
directly just before it frees the init memory. Then it needs to use
__init_begin and __init_end to know where the init memory location is.
Looking at all archs (and testing what I can), it appears that this should
work for each of them.
Reported-by: Nkernel test robot <xiaolong.ye@intel.com>
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      b80f0f6c
  15. 01 4月, 2017 5 次提交
    • S
      ftrace: Create separate t_func_next() to simplify the function / hash logic · 5bd84629
      由 Steven Rostedt (VMware) 提交于 
      I noticed that if I use dd to read the set_ftrace_filter file that the first
hash command is repeated.

 # cd /sys/kernel/debug/tracing
 # echo schedule > set_ftrace_filter
 # echo do_IRQ >> set_ftrace_filter
 # echo schedule:traceoff >> set_ftrace_filter
 # echo do_IRQ:traceoff >> set_ftrace_filter

 # cat set_ftrace_filter
 schedule
 do_IRQ
 schedule:traceoff:unlimited
 do_IRQ:traceoff:unlimited

 # dd if=set_ftrace_filter bs=1
 schedule
 do_IRQ
 schedule:traceoff:unlimited
 schedule:traceoff:unlimited
 do_IRQ:traceoff:unlimited
 98+0 records in
 98+0 records out
 98 bytes copied, 0.00265011 s, 37.0 kB/s

This is due to the way t_start() calls t_next() as well as the seq_file
calls t_next() and the state is slightly different between the two. Namely,
t_start() will call t_next() with a local "pos" variable.

By separating out the function listing from t_next() into its own function,
we can have better control of outputting the functions and the hash of
triggers. This simplifies the code.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      5bd84629
    • S
      ftrace: Update func_pos in t_start() when all functions are enabled · 43ff926a
      由 Steven Rostedt (VMware) 提交于 
      If all functions are enabled, there's a comment displayed in the file to
denote that:

  # cd /sys/kernel/debug/tracing
  # cat set_ftrace_filter
 #### all functions enabled ####

If a function trigger is set, those are displayed as well:

  # echo schedule:traceoff >> /debug/tracing/set_ftrace_filter
  # cat set_ftrace_filter
 #### all functions enabled ####
 schedule:traceoff:unlimited

But if you read that file with dd, the output can change:

  # dd if=/debug/tracing/set_ftrace_filter bs=1
 #### all functions enabled ####
 32+0 records in
 32+0 records out
 32 bytes copied, 7.0237e-05 s, 456 kB/s

This is because the "pos" variable is updated for the comment, but func_pos
is not. "func_pos" is used by the triggers (or hashes) to know how many
functions were printed and it bases its index from the pos - func_pos.
func_pos should be 1 to count for the comment printed. But since it is not,
t_hash_start() thinks that one trigger was already printed.

The cat gets to t_hash_start() via t_next() and not t_start() which updates
both pos and func_pos.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      43ff926a
    • S
      ftrace: Return NULL at end of t_start() instead of calling t_hash_start() · 2d71d989
      由 Steven Rostedt (VMware) 提交于 
      The loop in t_start() of calling t_next() will call t_hash_start() if the
pos is beyond the functions and enters the hash items. There's no reason to
check if p is NULL and call t_hash_start(), as that would be redundant.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      2d71d989
    • S
      ftrace: Assign iter->hash to filter or notrace hashes on seq read · c20489da
      由 Steven Rostedt (VMware) 提交于 
      Instead of testing if the hash to use is the filter_hash or the notrace_hash
at each iteration, do the test at open, and set the iter->hash to point to
the corresponding filter or notrace hash. Then use that directly instead of
testing which hash needs to be used each iteration.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      c20489da
    • S
      ftrace: Clean up __seq_open_private() return check · c1bc5919
      由 Steven Rostedt (VMware) 提交于 
      The return status check of __seq_open_private() is rather strange:

	iter = __seq_open_private();
	if (iter) {
		/* do stuff */
	}

	return iter ? 0 : -ENOMEM;

It makes much more sense to do the return of failure right away:

	iter = __seq_open_private();
	if (!iter)
		return -ENOMEM;

	/* do stuff */

	return 0;

This clean up will make updates to this code a bit nicer.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      c1bc5919
  17. 29 3月, 2017 1 次提交
    • S
      ftrace/x86: Do no run CPU sync when there is only one CPU online · 2b87965a
      由 Steven Rostedt (VMware) 提交于 
      Moving enabling of function tracing to early boot, even before scheduling is
enabled, means that it is not safe to enable interrupts. When function
tracing was enabled at boot up, it use to happen after scheduling and the
other CPUs were brought up. That required running a sync across all CPUs
when modifying the function hook locations in the code. To do the
synchronization, interrupts had to be enabled. Now function tracing can be
started before the other CPUs are brought up, and enabling interrupts in
that case is dangerous. As only tho boot CPU is active, there is no reason
to run the synchronization. If the online CPU count is one, do not bother
doing the synchronization. This removes the need to enable interrupts.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      2b87965a
  19. 25 3月, 2017 6 次提交
    • S
      tracing: Move trace_handle_return() out of line · af0009fc
      由 Steven Rostedt (VMware) 提交于 
      Currently trace_handle_return() looks like this:

 static inline enum print_line_t trace_handle_return(struct trace_seq *s)
 {
        return trace_seq_has_overflowed(s) ?
                TRACE_TYPE_PARTIAL_LINE : TRACE_TYPE_HANDLED;
 }

Where trace_seq_overflowed(s) is:

 static inline bool trace_seq_has_overflowed(struct trace_seq *s)
 {
	return s->full || seq_buf_has_overflowed(&s->seq);
 }

And seq_buf_has_overflowed(&s->seq) is:

 static inline bool
 seq_buf_has_overflowed(struct seq_buf *s)
 {
	return s->len > s->size;
 }

Making trace_handle_return() into:

 return (s->full || (s->seq->len > s->seq->size)) ?
           TRACE_TYPE_PARTIAL_LINE :
           TRACE_TYPE_HANDLED;

One would think this is not an issue to keep as an inline. But because this
is used in the TRACE_EVENT() macro, it is extended for every tracepoint in
the system. Taking a look at a single tracepoint x86_irq_vector (was the
first one I randomly chosen). As trace_handle_return is used in the
TRACE_EVENT() macro of trace_raw_output_##call() we disassemble
trace_raw_output_x86_irq_vector and do a diff:

- is the original
+ is the out-of-line code

I removed identical lines that were different just due to different
addresses.

--- /tmp/irq-vec-orig	2017-03-16 09:12:48.569384851 -0400
+++ /tmp/irq-vec-ool	2017-03-16 09:13:39.378153385 -0400
@@ -6,27 +6,23 @@
        53                      push   %rbx
        48 89 fb                mov    %rdi,%rbx
        4c 8b a7 c0 20 00 00    mov    0x20c0(%rdi),%r12
        e8 f7 72 13 00          callq  ffffffff81155c80 <trace_raw_output_prep>
        83 f8 01                cmp    $0x1,%eax
        74 05                   je     ffffffff8101e993 <trace_raw_output_x86_irq_vector+0x23>
        5b                      pop    %rbx
        41 5c                   pop    %r12
        5d                      pop    %rbp
        c3                      retq
        41 8b 54 24 08          mov    0x8(%r12),%edx
-       48 8d bb 98 10 00 00    lea    0x1098(%rbx),%rdi
+       48 81 c3 98 10 00 00    add    $0x1098,%rbx
-       48 c7 c6 7b 8a a0 81    mov    $0xffffffff81a08a7b,%rsi
+       48 c7 c6 ab 8a a0 81    mov    $0xffffffff81a08aab,%rsi
-       e8 c5 85 13 00          callq  ffffffff81156f70 <trace_seq_printf>

 === here's the start of the main difference ===

+       48 89 df                mov    %rbx,%rdi
+       e8 62 7e 13 00          callq  ffffffff81156810 <trace_seq_printf>
-       8b 93 b8 20 00 00       mov    0x20b8(%rbx),%edx
-       31 c0                   xor    %eax,%eax
-       85 d2                   test   %edx,%edx
-       75 11                   jne    ffffffff8101e9c8 <trace_raw_output_x86_irq_vector+0x58>
-       48 8b 83 a8 20 00 00    mov    0x20a8(%rbx),%rax
-       48 39 83 a0 20 00 00    cmp    %rax,0x20a0(%rbx)
-       0f 93 c0                setae  %al
+       48 89 df                mov    %rbx,%rdi
+       e8 4a c5 12 00          callq  ffffffff8114af00 <trace_handle_return>
        5b                      pop    %rbx
-       0f b6 c0                movzbl %al,%eax

 === end ===

        41 5c                   pop    %r12
        5d                      pop    %rbp
        c3                      retq

If you notice, the original has 22 bytes of text more than the out of line
version. As this is for every TRACE_EVENT() defined in the system, this can
become quite large.

   text	   data	    bss	    dec	    hex	filename
8690305	5450490	1298432	15439227	 eb957b	vmlinux-orig
8681725	5450490	1298432	15430647	 eb73f7	vmlinux-handle

This change has a total of 8580 bytes in savings.

 $ objdump -dr /tmp/vmlinux-orig | grep '^[0-9a-f]* <trace_raw_output' | wc -l
324

That's 324 tracepoints. But this does not include modules (which contain
many more tracepoints). For an allyesconfig build:

 $ objdump -dr vmlinux-allyes-orig | grep '^[0-9a-f]* <trace_raw_output' | wc -l
1401

That's 1401 tracepoints giving us:

   text    data     bss     dec     hex filename
137920629       140221067       53264384        331406080       13c0db00 vmlinux-allyes-orig
137827709       140221067       53264384        331313160       13bf7008 vmlinux-allyes-handle

92920 bytes in savings!!!

Link: http://lkml.kernel.org/r/20170315021431.13107-2-andi@firstfloor.orgReported-by: NAndi Kleen <andi@firstfloor.org>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      af0009fc
    • S
      ftrace: Allow for function tracing to record init functions on boot up · 42c269c8
      由 Steven Rostedt (VMware) 提交于 
      Adding a hook into free_reserve_area() that informs ftrace that boot up init
text is being free, lets ftrace safely remove those init functions from its
records, which keeps ftrace from trying to modify text that no longer
exists.

Note, this still does not allow for tracing .init text of modules, as
modules require different work for freeing its init code.

Link: http://lkml.kernel.org/r/1488502497.7212.24.camel@linux.intel.com

Cc: linux-mm@kvack.org
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Requested-by: NTodd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      42c269c8
    • S
      ftrace: Have function tracing start in early boot up · dbeafd0d
      由 Steven Rostedt (VMware) 提交于 
      Register the function tracer right after the tracing buffers are initialized
in early boot up. This will allow function tracing to begin early if it is
enabled via the kernel command line.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      dbeafd0d
    • S
      tracing: Postpone tracer start-up tests till the system is more robust · 9afecfbb
      由 Steven Rostedt (VMware) 提交于 
      As tracing can now be enabled very early in boot up, even before some
critical system services (like scheduling), do not run the tracer selftests
until after early_initcall() is performed. If a tracer is registered before
such time, it is saved off in a list and the test is run when the system is
able to handle more diverse functions.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      9afecfbb
    • S
      ftrace: Move ftrace_init() to right after memory initialization · f631718d
      由 Steven Rostedt (VMware) 提交于 
      Initialize the ftrace records immediately after memory initialization, as
that is all that is required for the records to be created. This will allow
for future work to get function tracing started earlier in the boot process.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      f631718d
    • S
      tracing: Split tracing initialization into two for early initialization · e725c731
      由 Steven Rostedt (VMware) 提交于 
      Create an early_trace_init() function that will initialize the buffers and
allow for ealier use of trace_printk(). This will also allow for future work
to have function tracing start earlier at boot up.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      e725c731
  21. 20 3月, 2017 6 次提交
    • L
      Linux 4.11-rc3 · 97da3854
      由 Linus Torvalds 提交于
      97da3854
    • L
      mm/swap: don't BUG_ON() due to uninitialized swap slot cache · 452b94b8
      由 Linus Torvalds 提交于 
      This BUG_ON() triggered for me once at shutdown, and I don't see a
reason for the check.  The code correctly checks whether the swap slot
cache is usable or not, so an uninitialized swap slot cache is not
actually problematic afaik.

I've temporarily just switched the BUG_ON() to a WARN_ON_ONCE(), since
I'm not sure why that seemingly pointless check was there.  I suspect
the real fix is to just remove it entirely, but for now we'll warn about
it but not bring the machine down.

Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      452b94b8
    • L
      Merge tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux · a07a6e41
      由 Linus Torvalds 提交于 
      Pull more powerpc fixes from Michael Ellerman:
 "A couple of minor powerpc fixes for 4.11:

   - wire up statx() syscall

   - don't print a warning on memory hotplug when HPT resizing isn't
     available

  Thanks to: David Gibson, Chandan Rajendra"

* tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/pseries: Don't give a warning when HPT resizing isn't available
  powerpc: Wire up statx() syscall
      a07a6e41
    • L
      Merge branch 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux · 4571bc5a
      由 Linus Torvalds 提交于 
      Pull parisc fixes from Helge Deller:

 - Mikulas Patocka added support for R_PARISC_SECREL32 relocations in
   modules with CONFIG_MODVERSIONS.

 - Dave Anglin optimized the cache flushing for vmap ranges.

 - Arvind Yadav provided a fix for a potential NULL pointer dereference
   in the parisc perf code (and some code cleanups).

 - I wired up the new statx system call, fixed some compiler warnings
   with the access_ok() macro and fixed shutdown code to really halt a
   system at shutdown instead of crashing & rebooting.

* 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix system shutdown halt
  parisc: perf: Fix potential NULL pointer dereference
  parisc: Avoid compiler warnings with access_ok()
  parisc: Wire up statx system call
  parisc: Optimize flush_kernel_vmap_range and invalidate_kernel_vmap_range
  parisc: support R_PARISC_SECREL32 relocation in modules
      4571bc5a
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending · 8aa34172
      由 Linus Torvalds 提交于 
      Pull SCSI target fixes from Nicholas Bellinger:
 "The bulk of the changes are in qla2xxx target driver code to address
  various issues found during Cavium/QLogic's internal testing (stable
  CC's included), along with a few other stability and smaller
  miscellaneous improvements.

  There are also a couple of different patch sets from Mike Christie,
  which have been a result of his work to use target-core ALUA logic
  together with tcm-user backend driver.

  Finally, a patch to address some long standing issues with
  pass-through SCSI export of TYPE_TAPE + TYPE_MEDIUM_CHANGER devices,
  which will make folks using physical (or virtual) magnetic tape happy"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (28 commits)
  qla2xxx: Update driver version to 9.00.00.00-k
  qla2xxx: Fix delayed response to command for loop mode/direct connect.
  qla2xxx: Change scsi host lookup method.
  qla2xxx: Add DebugFS node to display Port Database
  qla2xxx: Use IOCB interface to submit non-critical MBX.
  qla2xxx: Add async new target notification
  qla2xxx: Export DIF stats via debugfs
  qla2xxx: Improve T10-DIF/PI handling in driver.
  qla2xxx: Allow relogin to proceed if remote login did not finish
  qla2xxx: Fix sess_lock & hardware_lock lock order problem.
  qla2xxx: Fix inadequate lock protection for ABTS.
  qla2xxx: Fix request queue corruption.
  qla2xxx: Fix memory leak for abts processing
  qla2xxx: Allow vref count to timeout on vport delete.
  tcmu: Convert cmd_time_out into backend device attribute
  tcmu: make cmd timeout configurable
  tcmu: add helper to check if dev was configured
  target: fix race during implicit transition work flushes
  target: allow userspace to set state to transitioning
  target: fix ALUA transition timeout handling
  ...
      8aa34172
    • L
      Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm · 1b8df619
      由 Linus Torvalds 提交于 
      Pull device-dax fixes from Dan Williams:
 "The device-dax driver was not being careful to handle falling back to
  smaller fault-granularity sizes.

  The driver already fails fault attempts that are smaller than the
  device's alignment, but it also needs to handle the cases where a
  larger page mapping could be established. For simplicity of the
  immediate fix the implementation just signals VM_FAULT_FALLBACK until
  fault-size == device-alignment.

  One fix is for -stable to address pmd-to-pte fallback from the
  original implementation, another fix is for the new (introduced in
  4.11-rc1) pud-to-pmd regression, and a typo fix comes along for the
  ride.

  These have received a build success notification from the kbuild
  robot"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: fix debug output typo
  device-dax: fix pud fault fallback handling
  device-dax: fix pmd/pte fault fallback handling
      1b8df619
  23. 19 3月, 2017 7 次提交