- 20 8月, 2014 1 次提交
-
-
由 Haojian Zhuang 提交于
HiP04 GIC is the variate of ARM GICv2. ARM GICv2 supports 8 cores. HiP04 GIC extends to support 16 cores. It results that bit fields in GIC_DIST_TARGET & GIC_DIST_SOFTINT are different from ARM GICv2. And the maximium IRQ is downgrade from 1020 to 510. Since different register offset & bitfields definitation breaks compartible with ARM GICv2, create a new hip04 irq driver. And this driver is derived from irq-gic.c to support the Hisilicon HiP04 interrupt controller, which is similar to the GIC, but deviates at some points. Support for power management, non-banked registers, cascaded GICs (and multiple controllers in general) and bigLittle support has been removed from the GIC driver. Affinity related functions have been adjusted to match the Hisilicon hardware implementation. Signed-off-by: NHaojian Zhuang <haojian.zhuang@linaro.org> Link: https://lkml.kernel.org/r/1407408695-19626-9-git-send-email-haojian.zhuang@linaro.orgSigned-off-by: NJason Cooper <jason@lakedaemon.net>
-
- 17 8月, 2014 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 16 8月, 2014 38 次提交
-
-
git://cavan.codon.org.uk/platform-drivers-x86由 Linus Torvalds 提交于
Pull x86 platform driver updates from Matthew Garrett: "A moderate number of changes, but nothing awfully significant. A lot of const cleanups, some reworking and additions to the rfkill quirks in the asus driver, a new driver for generating falling laptop events on Toshibas and some misc fixes. Maybe vendors have stopped inventing things" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (41 commits) platform/x86: Enable build support for toshiba_haps Documentation: Add file about toshiba_haps module platform/x86: Toshiba HDD Active Protection Sensor asus-nb-wmi: Add wapf4 quirk for the U32U alienware-wmi: make hdmi_mux enabled on case-by-case basis ideapad-laptop: Constify DMI table and other r/o variables asus-nb-wmi.c: Rename x401u quirk to wapf4 compal-laptop: correct invalid hwmon name toshiba_acpi: Add Qosmio X75-A to the alt keymap dmi list toshiba_acpi: Add extra check to backlight code Fix log message about future removal of interface ideapad-laptop: Disable touchpad interface on Yoga models asus-nb-wmi: Add wapf4 quirk for the X550CC intel_ips: Make ips_mcp_limits variables static thinkpad_acpi: Mark volume_alsa_control_{vol,mute} as __initdata fujitsu-laptop: Mark fujitsu_dmi_table[] DMI table as __initconst hp-wmi: Add missing __init annotations to initialization code hp_accel: Constify ACPI and DMI tables fujitsu-tablet: Mark DMI callbacks as __init code dell-laptop: Mark dell_quirks[] DMI table as __initconst ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux由 Linus Torvalds 提交于
Pull idle update from Len Brown: "Two Intel-platform-specific updates to intel_idle, and a cosmetic tweak to the turbostat utility" * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: tweak whitespace in output format intel_idle: Broadwell support intel_idle: Disable Baytrail Core and Module C6 auto-demotion
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull module fix from Rusty Russell: "Nasty potential bug if someone uses a known module param with an invalid value (we don't fail unknown module params any more, just warn)" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: Clean up ro/nx after early module load failures
-
git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio由 Linus Torvalds 提交于
Pull virtio-rng update from Amit Shah: "Add derating factor for use by hwrng core Sending directly to you with the commit log changes Ted Ts'o pointed out. Not sure if Rusty's back after his travel, but this already has his s-o-b" * 'rng-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio: virtio: rng: add derating factor for use by hwrng core
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs updates from Chris Mason: "These are all fixes I'd like to get out to a broader audience. The biggest of the bunch is Mark's quota fix, which is also in the SUSE kernel, and makes our subvolume quotas dramatically more accurate. I've been running xfstests with these against your current git overnight, but I'm queueing up longer tests as well" * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: disable strict file flushes for renames and truncates Btrfs: fix csum tree corruption, duplicate and outdated checksums Btrfs: Fix memory corruption by ulist_add_merge() on 32bit arch Btrfs: fix compressed write corruption on enospc btrfs: correctly handle return from ulist_add btrfs: qgroup: account shared subtrees during snapshot delete Btrfs: read lock extent buffer while walking backrefs Btrfs: __btrfs_mod_ref should always use no_quota btrfs: adjust statfs calculations according to raid profiles
-
git://git.samba.org/jlayton/linux由 Linus Torvalds 提交于
Pull file locking bugfixes from Jeff Layton: "Most of these patches are to fix a long-standing regression that crept in when the BKL was removed from the file-locking code. The code was converted to use a conventional spinlock, but some fl_release_private ops can block and you can end up sleeping inside the lock. There's also a patch to make /proc/locks show delegations as 'DELEG'" * tag 'locks-v3.17-2' of git://git.samba.org/jlayton/linux: locks: update Locking documentation to clarify fl_release_private behavior locks: move locks_free_lock calls in do_fcntl_add_lease outside spinlock locks: defer freeing locks in locks_delete_lock until after i_lock has been dropped locks: don't reuse file_lock in __posix_lock_file locks: don't call locks_release_private from locks_copy_lock locks: show delegations as "DELEG" in /proc/locks
-
git://git.kvack.org/~bcrl/aio-next由 Linus Torvalds 提交于
Pull aio updates from Ben LaHaise. * git://git.kvack.org/~bcrl/aio-next: aio: use iovec array rather than the single one aio: fix some comments aio: use the macro rather than the inline magic number aio: remove the needless registration of ring file's private_data aio: remove no longer needed preempt_disable() aio: kill the misleading rcu read locks in ioctx_add_table() and kill_ioctx() aio: change exit_aio() to load mm->ioctx_table once and avoid rcu_read_lock()
-
由 Azael Avalos 提交于
Makefile and Kconfig build support patch for the newly introduced kernel module toshiba_haps. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Azael Avalos 提交于
This patch provides information about the Toshiba HDD Active Protection Sensor driver module toshiba_haps. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Azael Avalos 提交于
This driver adds support for the built-in accelereometer found on recent Toshiba laptops with HID TOS620A. This driver receives ACPI notify events 0x80 when the sensor detects a sudden move or a harsh vibration, as well as an ACPI notify event 0x81 whenever the movement or vibration has been stabilized. Also provides sysfs entries to get/set the desired protection level and reseting the HDD protection interface. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Hans de Goede 提交于
As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681 the U32U needs wapf=4 too. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mario Limonciello 提交于
Not all HW supporting WMAX method will support the HDMI mux feature. Explicitly quirk the HW that does support it. Signed-off-by: NMario Limonciello <mario_limonciello@dell.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mathias Krause 提交于
Constify the rfkill_blacklist[] DMI table, the ideapad_rfk_data[] table and the ideapad_attribute_group attribute group. There's no need to have them writeable during runtime. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Ike Panhc <ike.pan@canonical.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Hans de Goede 提交于
The actual x401u does not use the so named x401u quirk but the x55u quirk. All that the x401u quirk does it setting wapf to 4, so rename it to wapf4 to stop the confusion. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Roald Frederickx 提交于
Change the name of the hwmon interface from "compal-laptop" to "compal". A dash is an invalid character for a hwmon name and caused the call to hwmon_device_register_with_groups() to fail. Signed-off-by: NRoald Frederickx <roald.frederickx@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Azael Avalos 提交于
The Toshiba Qosmio X75-A series models also come with the new keymap layout. This patch adds this model to the alt_keymap_dmi list, along with an extra key found on these models. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Azael Avalos 提交于
Some Toshiba models (most notably Qosmios) come with an incomplete backlight method where the AML code doesn't check for write or read commands and always returns HCI_SUCCESS and the actual brightness (and in some cases the max brightness), thus allowing the backlight interface to be registered without write support. This patch changes the set_lcd_brightness function, checking the returned values for values greater than zero to avoid registering a broken backlight interface. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Martin Kepplinger 提交于
If this is going away, it won't be in 2012. Signed-off-by: NMartin Kepplinger <martink@posteo.de> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Hans de Goede 提交于
Yoga models don't offer touchpad ctrl through the ideapad interface, causing ideapad_sync_touchpad_state to send wrong touchpad enable/disable events. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Hans de Goede 提交于
As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681 the X550CC needs wapf=4 too. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mathias Krause 提交于
These variables don't need to be visible outside of this compilation unit, make them static. Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mathias Krause 提交于
Mark volume_alsa_control_vol and volume_alsa_control_mute as __initdata, as snd_ctl_new1() will copy the relevant parts, so there is no need to keep the master copies around after initialization. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mathias Krause 提交于
The DMI table is only ever used during initialization. Mark it as __initconst so its memory can be released afterwards -- roughly 1.5 kB. In turn, the callback functions can be marked with __init, too. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Jonathan Woithe <jwoithe@just42.net> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mathias Krause 提交于
These functions are only called from other initialization routines, so can be marked __init, too. Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mathias Krause 提交于
Constify the lis3lv02d_device_ids[] ACPI and the lis3lv02d_dmi_ids[] DMI tables. There's no need to have them writeable during runtime. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mathias Krause 提交于
The DMI table is already marked as __initconst, so can be the callback functions as they're only used in that context. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Robert Gerlach <khnz@gmx.de> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mathias Krause 提交于
The dell_quirks[] DMI table is only ever used during initialization. Mark it as __initconst so its memory can be released afterwards -- roughly 5.7 kB. In turn, the callback function can be marked with __init, too. Also the touchpad_led_init() function can be marked __init as it's only referenced from dell_init() -- an __init function. Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mathias Krause 提交于
Constify the asus_quirks[] DMI table. There's no need to have it writeable during runtime. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mathias Krause 提交于
Quite a lot of code and data of acer-wmi.c is only ever used during initialization. Mark those accordingly -- and constify, where appropriate -- so the memory can be released afterwards. All in all those changes move ~10 kB of code and data to the .init sections, marking them for release after initialization has finished. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: "Lee, Chun-Yi" <jlee@suse.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mathias Krause 提交于
Constify the asus_quirks[] DMI table. There's no need to have it writeable during runtime. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mathias Krause 提交于
The DMI table is only ever used during initialization. Mark it as __initconst so its memory can be released appropriately. In turn, the callback function can be marked with __init, too. Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mathias Krause 提交于
Encapsulate acer_suspend() and acer_resume with #ifdef CONFIG_PM_SLEEP to get rid of the following warnings: ../acer-wmi.c:2046:12: warning: ‘acer_suspend’ defined but not used [-Wunused-function] ../acer-wmi.c:2068:12: warning: ‘acer_resume’ defined but not used [-Wunused-function] Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: "Lee, Chun-Yi" <jlee@suse.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mathias Krause 提交于
sparse_keymap_setup() will make a copy of the keymap, so we can release the master copy after initialization. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: "Lee, Chun-Yi" <jlee@suse.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mathias Krause 提交于
The repo on kernel.org is no longer available but has a replacement at cavan.codon.org.uk. Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Himangi Saraogi 提交于
This patch removes the null test on block. block is initialized at the beginning of the function to &wblock->gblock. Since wblock is dereferenced prior to the null test, wblock must be a valid pointer, and &wblock->gblock cannot be null. The following Coccinelle script is used for detecting the change: @r@ expression e,f; identifier g,y; statement S1,S2; @@ *e = &f->g <+... f->y ...+> *if (e != NULL || ...) S1 else S2 Signed-off-by: NHimangi Saraogi <himangi774@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Andrey Utkin 提交于
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80231Reported-by: NDavid Binderman <dcb314@hotmail.com> Signed-off-by: NAndrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Hans de Goede 提交于
As reported here: https://bugs.launchpad.net/bugs/1277959 the X550CL needs wapf=4 too. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 AceLan Kao 提交于
BIOS won't light on the wifi-led after S3, so asus-wmi driver needs to control the wifi and wifi-led status. But, it'll lead to bt status error if asus-wmi driver controls bt as well. So, for X200CA, asus-wmi driver controls wifi status only and have to set wapf to 1. Signed-off-by: NAceLan Kao <acelan.kao@canonical.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-