- 15 4月, 2011 1 次提交
-
-
由 Alex Deucher 提交于
Noticed by Patrick Lowry. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 13 4月, 2011 8 次提交
-
-
由 Dave Airlie 提交于
This reverts commit 0a0883c8. this was in my tree by accident, I meant to rebase it out and didn't realise in time. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
This reverts commit 69a07f0b. We've tracked a number of problems back to this, and Thomas thinks we should redesign this for .40/41 anyways so I'm happy to revert it. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Konstantin Khlebnikov 提交于
fix Kconfig warning: (DRM_I915 && STUB_POULSBO) selects ACPI_VIDEO which has unmet direct dependencies (ACPI && X86 && BACKLIGHT_CLASS_DEVICE && VIDEO_OUTPUT_CONTROL && INPUT) Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Change vddci as well as vddc when changing power modes on evergreen/ni. Also, properly set vddci on boot up for ni cards. The vbios only sets the limited clocks and voltages on boot until the mc ucode is loaded. This should fix stability problems on some btc cards. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This is needed for setting voltages other than vddc. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
btc and cayman asics use the same callback for pcie port registers. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Apparently only rv515 asics need the workaround added in f24d86f1 (drm/radeon/kms: fix resume regression for some r5xx laptops). Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=34709Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
As per Konrad's original patch, the dummy page used by the gart code and allocated in radeon_gart_init() was not freed properly in radeon_gart_fini(). At the same time r6xx and newer allocated and freed the dummy page on their own. So to do Konrad's patch one better, just remove the allocation and freeing of the dummy page in the r6xx, 7xx, evergreen, and ni code and allocate and free in the gart_init/fini() functions for all asics. Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 11 4月, 2011 1 次提交
-
-
由 Dave Airlie 提交于
* 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next: drm/nvc0: improve vm flush function drm/nv50-nvc0: remove some code that doesn't belong here drm/nv50: use "nv86" tlb flush method on everything except 0x50/0xac drm/nouveau: quirk for XFX GT-240X-YA drm/nv50-nvc0: work around an evo channel hang that some people see drm/nouveau: implement init table opcode 0x5c drm/nouveau: fix oops on unload with disabled LVDS panel nv30: Fix parsing of perf table drm/nouveau: correct memtiming table parsing for nv4x
-
- 09 4月, 2011 7 次提交
-
-
由 Alex Deucher 提交于
Switch some errors to debug output. These are generally harmless and tend to confuse users. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Prefer minm over maxp. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=35994Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Michel Dänzer 提交于
Signed-off-by: NMichel Dänzer <daenzer@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Michel Dänzer 提交于
This is necessary even with PCI(e) GART, and it makes writeback work even with AGP on my PowerBook. Might still be unreliable with older revisions of UniNorth and other AGP bridges though. Signed-off-by: NMichel Dänzer <daenzer@vmware.com> Reviewed-by: NAlex Deucher <alex.deucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
This has always used a big hammer, but that hammer is probably too big, I'm also not sure its necessary but at least this should be safe. Should fix: https://bugzilla.kernel.org/show_bug.cgi?id=23592Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6由 Linus Torvalds 提交于
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Change initial mount authflavor only when server returns NFS4ERR_WRONGSEC NFS: Fix a signed vs. unsigned secinfo bug Revert "net/sunrpc: Use static const char arrays"
-
由 Randy Dunlap 提交于
Fix erroneous syscall kernel-doc comments in kernel/signal.c. Reported-by: NMatt Fleming <matt@console-pimps.org> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 4月, 2011 15 次提交
-
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] compile fix for latest binutils [S390] cio: prevent purging of CCW devices in the online state [S390] qdio: fix init sequence [S390] Fix parameter passing for smp_switch_to_cpu() [S390] oprofile s390: prevent stack corruption
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: quota: Don't write quota info in dquot_commit() ext3: Fix writepage credits computation for ordered mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: mpc8xxx_wdt: fix build
-
由 Peter Korsgaard 提交于
Since 1c48a5c9 (dt: Eliminate of_platform_{,un}register_driver) mpc8xxx_wdt no longer builds as it tries to refer to a 'match' variable rather than ofdev->dev.of_match that it checks just before. Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Bryan Schumaker 提交于
When attempting an initial mount, we should only attempt other authflavors if AUTH_UNIX receives a NFS4ERR_WRONGSEC error. This allows other errors to be passed back to userspace programs. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Linus Torvalds 提交于
Merge branch 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6 * 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: efifb: Add override for 11" Macbook Air 3,1 efifb: Support overriding fields FW tells us with the DMI data. fb: Reduce priority of resource conflict message savagefb: Remove obsolete else clause in savage_setup_i2c_bus savagefb: Set up I2C based on chip family instead of card id savagefb: Replace magic register address with define drivers/video/bfin-lq035q1-fb.c: introduce missing kfree video: s3c-fb: fix checkpatch errors and warning efifb: support AMD Radeon HD 6490 s3fb: fix Virge/GX2 fbcon: Remove unused 'display *p' variable from fb_flashcursor() fbdev: sh_mobile_lcdcfb: fix module lock acquisition fbdev: sh_mobile_lcdcfb: add blanking support viafb: initialize margins correct viafb: refresh rate bug collection sh: mach-ap325rxa: move backlight control code sh: mach-ecovec24: support for main lcd backlight
-
由 Linus Torvalds 提交于
Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: ARM: arch-shmobile: only run FSI init on respective boards ARM: arch-shmobile: only run HDMI init on respective boards ARM: mach-shmobile: Correctly check for CONFIG_MACH_MACKEREL
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: select ARCH_NO_SYSDEV_OPS. sh: fix build error in board-sh7757lcr.c sh: landisk: Remove whitespace sh: landisk: Remove mv_nr_irqs sh: sh-sci: Fix double initialization by serial_console_setup serial: sh-sci: prevent setup of uninitialized serial console dma: shdma: add checking the DMAOR_AE in sh_dmae_err
-
由 Linus Torvalds 提交于
Merge branches 'x86-fixes-for-linus', 'sched-fixes-for-linus', 'timers-fixes-for-linus', 'irq-fixes-for-linus' and 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-32, fpu: Fix FPU exception handling on non-SSE systems x86, hibernate: Initialize mmu_cr4_features during boot x86-32, NUMA: Fix ACPI NUMA init broken by recent x86-64 change x86: visws: Fixup irq overhaul fallout * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Clean up rebalance_domains() load-balance interval calculation * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/mrst/vrtc: Fix boot crash in mrst_rtc_init() rtc, x86/mrst/vrtc: Fix boot crash in rtc_read_alarm() * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Fix cpumask leak in __setup_irq() * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf probe: Fix listing incorrect line number with inline function perf probe: Fix to find recursively inlined function perf probe: Fix multiple --vars options behavior perf probe: Fix to remove redundant close perf probe: Fix to ensure function declared file
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6由 Linus Torvalds 提交于
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (28 commits) staging: usbip: bugfix for isochronous packets and optimization staging: usbip: bugfix add number of packets for isochronous frames staging: usbip: bugfixes related to kthread conversion staging: usbip: fix shutdown problems. staging: hv: Fix GARP not sent after Quick Migration staging: IIO: IMU: ADIS16400: Avoid using printk facility directly staging: IIO: IMU: ADIS16400: Fix product ID check, skip embedded revision number staging: IIO: IMU: ADIS16400: Make sure only enabled scan_elements are pushed into the ring staging: IIO: IMU: ADIS16400: Fix addresses of GYRO and ACCEL calibration offset staging: IIO: IMU: ADIS16400: Add delay after self test staging: IIO: IMU: ADIS16400: Fix up SPI messages cs_change behavior staging/rtl81*: build as loadable modules only staging: brcm80211: removed 'is_amsdu causing toss' log spam staging: brcm80211: fix for 'Short CCK' log spam staging: brcm80211: fix for 'AC_BE txop..' logs spammed problem staging: memrar: remove driver from tree staging: sep: remove last memrar remnants staging: fix hv_mouse build, needs delay.h staging: fix olpc_dcon build errors staging: sm7xx: fixed defines ... Fix up trivial conflict in drivers/staging/memrar/memrar_handler.c (deleted vs trivial spelling fixes)
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
* 'kvm-updates/2.6.39' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: move and fix substitue search for missing CPUID entries KVM: fix XSAVE bit scanning KVM: Enable async page fault processing KVM: fix crash on irqfd deassign
-
git://git.infradead.org/ubifs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.infradead.org/ubifs-2.6: UBI: do not select KALLSYMS_ALL UBI: do not compare array with NULL UBI: check if we are in RO mode in the erase routine UBIFS: fix debugging failure in dbg_check_space_info UBIFS: fix error path in dbg_debugfs_init_fs UBIFS: unify error path dbg_debugfs_init_fs UBIFS: do not select KALLSYMS_ALL UBIFS: fix assertion warnings UBIFS: fix oops on error path in read_pnode UBIFS: do not read flash unnecessarily
-
git://git.profusion.mobi/users/lucas/linux-2.6由 Linus Torvalds 提交于
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Add support for CH Pro Throttle HID: hid-magicmouse: Increase evdev buffer size HID: add FF support for Logitech G25/G27 HID: roccat: Add support for wireless variant of Pyra HID: Fix typo Keyoutch -> Keytouch HID: add support for Skycable 0x3f07 wireless presenter
-
由 Youquan Song 提交于
Fix build failure issue for hv_mouse When build 2.6.39-rc1 kernel, it will be blocked at build hv_mouse. drivers/staging/hv/hv_mouse.c: In function ‘ReleaseInputDevice’: drivers/staging/hv/hv_mouse.c:293: error: implicit declaration of function ‘udelay’ Signed-off-by: NYouquan Song <youquan.song@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 4月, 2011 8 次提交
-
-
由 Linus Torvalds 提交于
The normal mmap paths all avoid creating a mapping where the pgoff inside the mapping could wrap around due to overflow. However, an expanding mremap() can take such a non-wrapping mapping and make it bigger and cause a wrapping condition. Noticed by Robert Swiecki when running a system call fuzzer, where it caused a BUG_ON() due to terminally confusing the vma_prio_tree code. A vma dumping patch by Hugh then pinpointed the crazy wrapped case. Reported-and-tested-by: NRobert Swiecki <robert@swiecki.net> Acked-by: NHugh Dickins <hughd@google.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Feng Tang 提交于
The sfi_mrtc_array[] only gets initialized when the sfi mrtc table is parsed, so the vrtc_paddr should be initalized after it too. Signed-off-by: NFeng Tang <feng.tang@intel.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1302140389-27603-1-git-send-email-feng.tang@intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Feng Tang 提交于
Commit f44f7f96 ("RTC: Initialize kernel state from RTC") caused a boot regression on the MRST platform. The reason is that rtc_device_register() calls rtc_read_alarm() after that change, which function does not have all driver data set up yet. The rtc-mrst driver needs to call dev_set_drvdata() before rtc_device_register() gets called. Signed-off-by: NFeng Tang <feng.tang@intel.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Acked-by: NJohn Stultz <john.stultz@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1302140384-27571-1-git-send-email-feng.tang@intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Hans Rosenfeld 提交于
On 32bit systems without SSE (that is, they use FSAVE/FRSTOR for FPU context switches), FPU exceptions in user mode cause Oopses, BUGs, recursive faults and other nasty things: fpu exception: 0000 [#1] last sysfs file: /sys/power/state Modules linked in: psmouse evdev pcspkr serio_raw [last unloaded: scsi_wait_scan] Pid: 1638, comm: fxsave-32-excep Not tainted 2.6.35-07798-g58a992b9-dirty #633 VP3-596B-DD/VT82C597 EIP: 0060:[<c1003527>] EFLAGS: 00010202 CPU: 0 EIP is at math_error+0x1b4/0x1c8 EAX: 00000003 EBX: cf9be7e0 ECX: 00000000 EDX: cf9c5c00 ESI: cf9d9fb4 EDI: c1372db3 EBP: 00000010 ESP: cf9d9f1c DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 Process fxsave-32-excep (pid: 1638, ti=cf9d8000 task=cf9be7e0 task.ti=cf9d8000) Stack: 00000000 00000301 00000004 00000000 00000000 cf9d3000 cf9da8f0 00000001 <0> 00000004 cf9b6b60 c1019a6b c1019a79 00000020 00000242 000001b6 cf9c5380 <0> cf806b40 cf791880 00000000 00000282 00000282 c108a213 00000020 cf9c5380 Call Trace: [<c1019a6b>] ? need_resched+0x11/0x1a [<c1019a79>] ? should_resched+0x5/0x1f [<c108a213>] ? do_sys_open+0xbd/0xc7 [<c108a213>] ? do_sys_open+0xbd/0xc7 [<c100353b>] ? do_coprocessor_error+0x0/0x11 [<c12d5965>] ? error_code+0x65/0x70 Code: a8 20 74 30 c7 44 24 0c 06 00 03 00 8d 54 24 04 89 d9 b8 08 00 00 00 e8 9b 6d 02 00 eb 16 8b 93 5c 02 00 00 eb 05 e9 04 ff ff ff <9b> dd 32 9b e9 16 ff ff ff 81 c4 84 00 00 00 5b 5e 5f 5d c3 c6 EIP: [<c1003527>] math_error+0x1b4/0x1c8 SS:ESP 0068:cf9d9f1c This usually continues in slight variations until the system is reset. This bug was introduced by commit 58a992b9: x86-32, fpu: Rewrite fpu_save_init() Signed-off-by: NHans Rosenfeld <hans.rosenfeld@amd.com> Link: http://lkml.kernel.org/r/1302106003-366952-1-git-send-email-hans.rosenfeld@amd.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Arjan Mels 提交于
For isochronous packets the actual_length is the sum of the actual length of each of the packets, however between the packets might be padding, so it is not sufficient to just send the first actual_length bytes of the buffer. To fix this and simultanesouly optimize the bandwidth the content of the isochronous packets are send without the padding, the padding is restored on the receiving end. Signed-off-by: NArjan Mels <arjan.mels@gmx.net> Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net> Cc: Max Vozeler <max@vozeler.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Arjan Mels 提交于
The number_of_packets was not transmitted for RET_SUBMIT packets. The linux client used the stored number_of_packet from the submitted request. The windows userland client does not do this however and needs to know the number_of_packets to determine the size of the transmission. Signed-off-by: NArjan Mels <arjan.mels@gmx.net> Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net> Cc: Max Vozeler <max@vozeler.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Arjan Mels 提交于
When doing a usb port reset do a queued reset instead to prevent a deadlock: the reset will cause the driver to unbind, causing the usb_driver_lock_for_reset to stall. Signed-off-by: NArjan Mels <arjan.mels@gmx.net> Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net> Cc: Max Vozeler <max@vozeler.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Arjan Mels 提交于
When shuting down the tcp_rx and tcp_tx threads first check if they are not closed already (maybe because an error caused them to return). Signed-off-by: NArjan Mels <arjan.mels@gmx.net> Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net> Cc: Max Vozeler <max@vozeler.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-