This platform survives physical to virtual patching
without any hickups, and can use AUTO_ZRELADDR.
We still need to keep Makefile.boot but it is now empty.

Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

There is no boardfiles or anything else using the fixed IRQs
anymore, switch the platform to use sparse IRQs and delete
the <mach/irqs.h> header.

Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Delete the Gemini boardfiles: we have corresponding, fully-featured
device trees for all these boards. Delete the referenced include
files. Delete the local config symbols, especially one for
"swapped memory", as all supported boards have swapped memory, and
would a new board be supported this is likely not the right way
to achieve it anyways. Only the Kconfig options in the central
arch/arm/Kconfig remains.

Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This adds initial and compulsory device tree support to the
Gemini ARMv4 platform.

We are selecting a bunch of "absolute minimals" for getting a working
system up with just device tree:

- We select USE_OF for natural reasons or nothing works.

- We select CLKSRC_OF and GEMINI_TIMER so we get timekeeping from
  the clocksource.

- We select GPIO_GEMINI because these are used as irqchips, and
  for a generic driver it is not reasonable for those to have to
  select every possible irqchip in the world to work, the platform
  should simply provide the available irqchips.

- We select a UART that can be exprected to work with
  SERIAL_OF_PLATFORM which is the name for an 8250 OF-probed
  serial port.

- We select the syscon-based reset controller: it's not fun when
  "reboot" doesn't work because of Kconfig, so we just select
  POWER_RESET and POWER_RESET_SYSCON.

- We perhaps a bit controversiallt select ARM_APPENDED_DTB, because
  this platform is using the ancient RedBoot, and can *NOT* be
  expected to upgrade its bootloaders. Appended device tree is
  simply how these devices have to work with device tree.

Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

In order to enable device tree boot on this machine we must first
convert it to runtime-manage its irq handler, so do this.

Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

x86 has an option: CONFIG_DEBUG_VIRTUAL to do additional checks on
virt_to_phys calls. The goal is to catch users who are calling
virt_to_phys on non-linear addresses immediately. This includes caller
using __virt_to_phys() on image addresses instead of __pa_symbol(). This
is a generally useful debug feature to spot bad code (particulary in
drivers).
Acked-by: NRussell King <rmk+kernel@armlinux.org.uk>
Acked-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Currently, there's no good way to test for the presence of
set_memory_ro/rw/x/nx() helpers implemented by archs such as
x86, arm, arm64 and s390.

There's DEBUG_SET_MODULE_RONX and DEBUG_RODATA, however both
don't really reflect that: set_memory_*() are also available
even when DEBUG_SET_MODULE_RONX is turned off, and DEBUG_RODATA
is set by parisc, but doesn't implement above functions. Thus,
add ARCH_HAS_SET_MEMORY that is selected by mentioned archs,
where generic code can test against this.

This also allows later on to move DEBUG_SET_MODULE_RONX out of
the arch specific Kconfig to define it only once depending on
ARCH_HAS_SET_MEMORY.
Suggested-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are multiple architectures that support CONFIG_DEBUG_RODATA and
CONFIG_SET_MODULE_RONX. These options also now have the ability to be
turned off at runtime. Move these to an architecture independent
location and make these options def_bool y for almost all of those
arches.
Signed-off-by: NLaura Abbott <labbott@redhat.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NKees Cook <keescook@chromium.org>

All Samsung platforms, including the Exynos, are selecting HZ_FIXED with
200 Hz.  Unfortunately in case of multiplatform image this affects also
other platforms when Exynos is enabled.

This looks like an very old legacy code, dating back to initial
upstreaming of S3C24xx.  Probably it was required for s3c24xx timer
driver, which was removed in commit ad38bdd1 ("ARM: SAMSUNG: Remove
unused plat-samsung/time.c").

Since then, this fixed 200 Hz spread everywhere, including out-of-tree
Samsung kernels (SoC vendor's and Tizen's).  I believe this choice
was rather an effect of coincidence instead of conscious choice.

On S3C24xx, the PWM counter is only 16 bit wide, and with the
typical 12MHz input clock that overflows every 5.5ms.  This works
with HZ=200 or higher but not with HZ=100 which needs a 10ms
interval between ticks.  On Later chips (S3C64xx, S5P and EXYNOS),
the counter is 32 bits and does not have this problem.

The new samsung_pwm_timer driver solves the problem by scaling the input
clock by a factor of 50 on S3C24xx, which makes it less accurate but
allows HZ=100 as well as CONFIG_NO_HZ with fewer wakeups.

Few perf mem and sched tests on Odroid XU3 board (Exynos5422, 4x Cortex
A7, 4x Cortex A15) show no regressions when switching from 200 Hz to
other values.
Reported-by: NLee Jones <lee.jones@linaro.org>
[Dropping of 200_HZ from S3C/S5P was suggested by Arnd]
Reported-by: NArnd Bergmann <arnd@arndb.de>
Cc: Kukjin Kim <kgene@kernel.org>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
[Tested on Exynos5800]
Tested-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NKukjin Kim <kgene@kernel.org>
[Tested on S3C2440]
Tested-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: NLee Jones <lee.jones@linaro.org>

This patch allows ARM guests to use GICv3 ITS on an arm64 host
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

This patch introduces the MACH_STM32F746 to make possible to only select
STM32F746 pinctrl driver

By default, all the MACH_STM32Fxxx flags will be set with STM32 defconfig.
Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com>

This came to light when implementing native 64-bit atomics for ARCv2.

The atomic64 self-test code uses CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
to check whether atomic64_dec_if_positive() is available.  It seems it
was needed when not every arch defined it.  However as of current code
the Kconfig option seems needless

 - for CONFIG_GENERIC_ATOMIC64 it is auto-enabled in lib/Kconfig and a
   generic definition of API is present lib/atomic64.c
 - arches with native 64-bit atomics select it in arch/*/Kconfig and
   define the API in their headers

So I see no point in keeping the Kconfig option

Compile tested for:
 - blackfin (CONFIG_GENERIC_ATOMIC64)
 - x86 (!CONFIG_GENERIC_ATOMIC64)
 - ia64

Link: http://lkml.kernel.org/r/1473703083-8625-3-git-send-email-vgupta@synopsys.comSigned-off-by: NVineet Gupta <vgupta@synopsys.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ming Lin <ming.l@ssi.samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Instead of comparing the name to a magic string, use archdata to
explicitly communicate whether the arch timer is suitable for
direct vdso access.
Acked-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NRussell King <rmk+kernel@armlinux.org.uk>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NScott Wood <oss@buserror.net>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

PCI_DOMAINS config should be selected for any SoCs
having more than a single PCIe controller. Without PCI_DOMAINS
config, only one PCIe controller gets registered.

Select PCI_DOMAINS in ARCH_MULTIPLATFORM if PCI is selected, since
it doesn't harm even if a platform has a single PCIe port.
Also remove PCI_DOMAINS being selected from other platform
specific configs.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Acked-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Originally-from: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: arnd@arndb.de
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: bruherrera@gmail.com
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: lee.jones@linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1474387259-18926-4-git-send-email-alexandre.torgue@st.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

This reduces the Kconfig for the RealView by assuming we are
always booting from the device tree, and removing all the uses
of CONFIG_REALVIEW_DT and replacing with CONFIG_ARCH_REALVIEW.

Further:

- Drop REALVIEW_HIGH_PHYS_OFFSET: we don't use this with device
  tree.

- Drop the REALVIEW_EB_ARM11MP_REVB option: we now handle this
  by simply using another device tree.

- Drop the PB1176 secure flash option: this is defined in the
  PB1176 device tree but marked as "disabled", so users who
  want to use it can simply enable it in the device tree and
  go hacking around.

Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Enables CONFIG_HARDENED_USERCOPY checks on arm.

Based on code from PaX and grsecurity.
Signed-off-by: NKees Cook <keescook@chromium.org>

Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Reviewed-by: NVladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

The workaround for both errata is to set bit 24 in the diagnostic
register.  There are no known end-user bugs solved by fixing this
errata, but the fix is trivial and it seems sane to apply it.

The arguments for why this needs to be in the kernel are similar to the
arugments made in the patch "Workaround errata A12 818325/852422 A17
852423".
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This erratum has a very simple workaround (set a bit in a register), so
let's apply it.  Apparently the workaround's downside is a very slight
power impact.

Note that applying this errata fixes deadlocks that are easy to
reproduce with real world applications.

The arguments for why this needs to be in the kernel are similar to the
arugments made in the patch "Workaround errata A12 818325/852422 A17
852423".
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

There are several similar errata on Cortex A12 and A17 that all have the same workaround: setting bit[12] of the Feature Register.
Technically the list of errata are:

- A12 818325: Execution of an UNPREDICTABLE STR or STM instruction
  might deadlock.  Fixed in r0p1.
- A12 852422: Execution of a sequence of instructions might lead to
  either a data corruption or a CPU deadlock.  Not fixed in any A12s
  yet.
- A17 852423: Execution of a sequence of instructions might lead to
  either a data corruption or a CPU deadlock.  Not fixed in any A17s
  yet.

Since A12 got renamed to A17 it seems likely that there won't be any
future Cortex-A12 cores, so we'll enable for all Cortex-A12.

For Cortex-A17 I believe that all known revisions are affected and that all knows revisions means <= r1p2.  Presumably if a new A17 was
released it would have this problem fixed.

Note that in <https://patchwork.kernel.org/patch/4735341/> folks
previously expressed opposition to this change because:
A) It was thought to only apply to r0p0 and there were no known r0p0
   boards supported in mainline.
B) It was argued that such a workaround beloned in firmware.

Now that this same fix solves other errata on real boards (like
rk3288) point A) is addressed.

Point B) is impossible to address on boards like rk3288.  On rk3288
the firmware doesn't stay resident in RAM and isn't involved at all in
the suspend/resume process nor in the SMP bringup process.  That means
that the most the firmware could do would be to set the bit on "core
0" and this bit would be lost at suspend/resume time.  It is true that
we could write a "generic" solution that saved the boot-time "core 0"
value of this register and applied it at SMP bringup / resume time.
However, since this register (described as the "Feature Register" in
errata) appears to be undocumented (as far as I can tell) and is only
modified for these errata, that "generic" solution seems questionably
cleaner.  The generic solution also won't fix existing users that
haven't happened to do a FW update.

Note that in ARM64 presumably PSCI will be universal and fixes like
this will end up in ATF.  Hopefully we are nearing the end of this
style of errata workaround.
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Signed-off-by: NHuang Tao <huangtao@rock-chips.com>
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Switch CLPS711X to multiplatform.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Change the Kconfig option logic to fullfil with the current approach.

A new Kconfig option is added, CONFIG_CLPS711X_TIMER and is selected by the
platform. Then the clocksource's Kconfig is changed to make this option
selectable by the user if the COMPILE_TEST option is set. Otherwise, it is
up to the platform's Kconfig to select the timer.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>

The PCI_MSI symbol is used inconsistently throughout the tree, with some
drivers using 'select' and others using 'depends on', or using conditional
selects.  This keeps causing problems; the latest one is a result of
ARCH_ALPINE using a 'select' statement to enable its platform-specific MSI
driver without enabling MSI:

  warning: (ARCH_ALPINE) selects ALPINE_MSI which has unmet direct dependencies (PCI && PCI_MSI)
  drivers/irqchip/irq-alpine-msi.c:104:15: error: variable 'alpine_msix_domain_info' has initializer but incomplete type
   static struct msi_domain_info alpine_msix_domain_info = {
		 ^~~~~~~~~~~~~~~
  drivers/irqchip/irq-alpine-msi.c:105:2: error: unknown field 'flags' specified in initializer
    .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
    ^
  drivers/irqchip/irq-alpine-msi.c:105:11: error: 'MSI_FLAG_USE_DEF_DOM_OPS' undeclared here (not in a function)
    .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
	     ^~~~~~~~~~~~~~~~~~~~~~~~

There is little reason to enable PCI support for a platform that uses MSI
but then leave MSI disabled at compile time.

Select PCI_MSI from irqchips that implement MSI, and make PCI host bridges
that use MSI on ARM depend on PCI_MSI_IRQ_DOMAIN.

For all three architectures that support PCI_MSI_IRQ_DOMAIN (ARM, ARM64,
X86), enable it by default whenever MSI is enabled.

[bhelgaas: changelog, omit crypto config change]
Suggested-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>

This patch allows to build the whole kernel with GCC plugins. It was ported from
grsecurity/PaX. The infrastructure supports building out-of-tree modules and
building in a separate directory. Cross-compilation is supported too.
Currently the x86, arm, arm64 and uml architectures enable plugins.

The directory of the gcc plugins is scripts/gcc-plugins. You can use a file or a directory
there. The plugins compile with these options:
 * -fno-rtti: gcc is compiled with this option so the plugins must use it too
 * -fno-exceptions: this is inherited from gcc too
 * -fasynchronous-unwind-tables: this is inherited from gcc too
 * -ggdb: it is useful for debugging a plugin (better backtrace on internal
    errors)
 * -Wno-narrowing: to suppress warnings from gcc headers (ipa-utils.h)
 * -Wno-unused-variable: to suppress warnings from gcc headers (gcc_version
    variable, plugin-version.h)

The infrastructure introduces a new Makefile target called gcc-plugins. It
supports all gcc versions from 4.5 to 6.0. The scripts/gcc-plugin.sh script
chooses the proper host compiler (gcc-4.7 can be built by either gcc or g++).
This script also checks the availability of the included headers in
scripts/gcc-plugins/gcc-common.h.

The gcc-common.h header contains frequently included headers for GCC plugins
and it has a compatibility layer for the supported gcc versions.

The gcc-generate-*-pass.h headers automatically generate the registration
structures for GIMPLE, SIMPLE_IPA, IPA and RTL passes.

Note that 'make clean' keeps the *.so files (only the distclean or mrproper
targets clean all) because they are needed for out-of-tree modules.

Based on work created by the PaX Team.
Signed-off-by: NEmese Revfy <re.emese@gmail.com>
Acked-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NMichal Marek <mmarek@suse.com>

This replaces:

- "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can
  now be selected directly.

- "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB
  is now selectable by everyone, so we need not declare our
  intent to select it.

When ordering the symbols the following rationale was used:
if the selects were in alphabetical order, I moved select GPIOLIB
to be in alphabetical order, but if the selects were not
maintained in alphabetical order, I just replaced
"select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB".

Cc: Michael Büsch <m@bues.ch>
Cc: arm@kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

printk() takes some locks and could not be used a safe way in NMI
context.

The chance of a deadlock is real especially when printing stacks from
all CPUs.  This particular problem has been addressed on x86 by the
commit a9edc880 ("x86/nmi: Perform a safe NMI stack trace on all
CPUs").

The patchset brings two big advantages.  First, it makes the NMI
backtraces safe on all architectures for free.  Second, it makes all NMI
messages almost safe on all architectures (the temporary buffer is
limited.  We still should keep the number of messages in NMI context at
minimum).

Note that there already are several messages printed in NMI context:
WARN_ON(in_nmi()), BUG_ON(in_nmi()), anything being printed out from MCE
handlers.  These are not easy to avoid.

This patch reuses most of the code and makes it generic.  It is useful
for all messages and architectures that support NMI.

The alternative printk_func is set when entering and is reseted when
leaving NMI context.  It queues IRQ work to copy the messages into the
main ring buffer in a safe context.

__printk_nmi_flush() copies all available messages and reset the buffer.
Then we could use a simple cmpxchg operations to get synchronized with
writers.  There is also used a spinlock to get synchronized with other
flushers.

We do not longer use seq_buf because it depends on external lock.  It
would be hard to make all supported operations safe for a lockless use.
It would be confusing and error prone to make only some operations safe.

The code is put into separate printk/nmi.c as suggested by Steven
Rostedt.  It needs a per-CPU buffer and is compiled only on
architectures that call nmi_enter().  This is achieved by the new
HAVE_NMI Kconfig flag.

The are MN10300 and Xtensa architectures.  We need to clean up NMI
handling there first.  Let's do it separately.

The patch is heavily based on the draft from Peter Zijlstra, see

  https://lkml.org/lkml/2015/6/10/327

[arnd@arndb.de: printk-nmi: use %zu format string for size_t]
[akpm@linux-foundation.org: min_t->min - all types are size_t here]
Signed-off-by: NPetr Mladek <pmladek@suse.com>
Suggested-by: NPeter Zijlstra <peterz@infradead.org>
Suggested-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Jan Kara <jack@suse.cz>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>	[arm part]
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jiri Kosina <jkosina@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Define HAVE_EXIT_THREAD for archs which want to do something in
exit_thread. For others, let's define exit_thread as an empty inline.

This is a cleanup before we change the prototype of exit_thread to
accept a task parameter.

[akpm@linux-foundation.org: fix mips]
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Split the HAVE_BPF_JIT into two for distinguishing cBPF and eBPF JITs.

Current cBPF ones:

  # git grep -n HAVE_CBPF_JIT arch/
  arch/arm/Kconfig:44:    select HAVE_CBPF_JIT
  arch/mips/Kconfig:18:   select HAVE_CBPF_JIT if !CPU_MICROMIPS
  arch/powerpc/Kconfig:129:       select HAVE_CBPF_JIT
  arch/sparc/Kconfig:35:  select HAVE_CBPF_JIT

Current eBPF ones:

  # git grep -n HAVE_EBPF_JIT arch/
  arch/arm64/Kconfig:61:  select HAVE_EBPF_JIT
  arch/s390/Kconfig:126:  select HAVE_EBPF_JIT if PACK_STACK && HAVE_MARCH_Z196_FEATURES
  arch/x86/Kconfig:94:    select HAVE_EBPF_JIT                    if X86_64

Later code also needs this facility to check for eBPF JITs.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The change adds improved support of NXP LPC32xx MIC, SIC1 and SIC2
interrupt controllers.

This is a list of new features in comparison to the legacy driver:
* irq types are taken from device tree settings, no more need to
  hardcode them,
* old driver is based on irq_domain_add_legacy, which causes problems
  with handling MIC hardware interrupt 0 produced by SIC1,
* there is one driver for MIC, SIC1 and SIC2, no more need to handle
  them separately, e.g. have two separate handlers for SIC1 and SIC2,
* the driver does not have any dependencies on hardcoded register
  offsets,
* the driver is much simpler for maintenance,
* SPARSE_IRQS option is supported.

Legacy LPC32xx interrupt controller driver was broken since commit
76ba59f8 ("genirq: Add irq_domain-aware core IRQ handler"), which
requires a private interrupt handler, otherwise any SIC1 generated
interrupt (mapped to MIC hwirq 0) breaks the kernel with the message
"unexpected IRQ trap at vector 00".

The change disables compilation of a legacy driver found at
arch/arm/mach-lpc32xx/irq.c, the file will be removed in a separate
commit.

Fixes: 76ba59f8 ("genirq: Add irq_domain-aware core IRQ handler")
Tested-by: NSylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Aspeed devices are a common Baseboard Management Controller (BMC)
system on chip containing an ARM9 or ARM11 core, off-chip DDR RAM and
support for a large number of peripherals.

This patch adds basic support for the ast2400 and ast2500 machines,
capable of booting to a prompt in QEMU (-M palmetto-bmc), on an
Palmetto OpenPower development machine, and on the ast2500 EVB.
Signed-off-by: NJoel Stanley <joel@jms.id.au>

The Cortex-M Prototyping System (or V2M-MPS2) is designed for
prototyping and evaluation Cortex-M family of processors including the
latest Cortex-M7

It comes with a range of useful peripherals including 8MB single cycle
SRAM, 16MB PSRAM, Ethernet, QSVGA touch screen panel, 4bit RGB VGA
connector, Audio, SPI and GPIO.
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: NSudeep Holla <sudeep.holla@arm.com>

Add mach-oxnas directory containing Kconfig.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>

Include pci/pcie/Kconfig directly from pci/Kconfig, so arches don't
have to source both pci/Kconfig and pci/pcie/Kconfig.

Note that this effectively adds pci/pcie/Kconfig to the following
arches, because they already sourced drivers/pci/Kconfig but they
previously did not source drivers/pci/pcie/Kconfig:

  alpha
  avr32
  blackfin
  frv
  m32r
  m68k
  microblaze
  mn10300
  parisc
  sparc
  unicore32
  xtensa

[bhelgaas: changelog, source pci/pcie/Kconfig at top of pci/Kconfig, whitespace]
Signed-off-by: NSasa Bogicevic <brutallesale@gmail.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Basic machine port for the Artpec-6 SoC from Axis
Communications.
Signed-off-by: NLars Persson <larper@axis.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NOlof Johansson <olof@lixom.net>

All drivers that are relevant for rpc or footbridge have stopped
using virt_to_bus a while ago, so we can remove it and avoid some
harmless randconfig warnings for drivers that we do not care about:

drivers/atm/zatm.c: In function 'poll_rx':
drivers/atm/zatm.c:401:18: warning: 'bus_to_virt' is deprecated [-Wdeprecated-declarations]
   skb = ((struct rx_buffer_head *) bus_to_virt(here[2]))->skb;

FWIW, the remaining drivers using this are:

ATM:  firestream, zatm, ambassador, horizon
ISDN: hisax/netjet
V4L:  STA2X11, zoran
Net:  Appletalk LTPC, Tulip DE4x5, Toshiba IrDA
WAN:  comtrol sv11, cosa, lanmedia, sealevel
SCSI: DPT_I2O, buslogic
VME:  CA91C142

My best guess is that all of the above are so hopelessly obsolete that
we are best off removing all of them form the kernel, but that can be
done another time.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We already forbid that combination when AUTO_ZRELADDR is disabled,
for the same reason that the two have their RAM at different
physical addresses as seen from the CPU.

This does the same change for PATCH_PHYS_VIRT: if you disable
either of the options, Kconfig now enforces that you have to
pick one or the other SoC family.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>

ARM64 PSCI kernel interfaces that initialize idle states and implement
the suspend API to enter them are generic and can be shared with the
ARM architecture.

To achieve that goal, this patch moves ARM64 PSCI idle management
code to drivers/firmware, so that the interface to initialize and
enter idle states can actually be shared by ARM and ARM64 arches
back-ends.

The ARM generic CPUidle implementation also requires the definition of
a cpuidle_ops section entry for the kernel to initialize the CPUidle
operations at boot based on the enable-method (ie ARM64 has the
statically initialized cpu_ops counterparts for that purpose); therefore
this patch also adds the required section entry on CONFIG_ARM for PSCI so
that the kernel can initialize the PSCI CPUidle back-end when PSCI is
the probed enable-method.

On ARM64 this patch provides no functional change.
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arch/arm64]
Acked-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NJisheng Zhang <jszhang@marvell.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The code enabled by the ARM_CPU_SUSPEND config option is used by
kernel subsystems for purposes that go beyond system suspend so its
config entry should be augmented to take more default options into
account and avoid forcing its selection to prevent dependencies
override.

To achieve this goal, this patch reworks the ARM_CPU_SUSPEND config
entry and updates its default config value (by adding the BL_SWITCHER
option to it) and its dependencies (ARCH_SUSPEND_POSSIBLE), so that the
symbol is still selected by default by the subsystems requiring it and
at the same time enforcing the dependencies correctly.
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

NXP LPC32xx platform does not have any controller capable for disk
drives, selection of HAVE_IDE is not needed.
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>