Many drivers use the default CIS entry within their pcmcia_config_loop()
callback function. Therefore, factor the default CIS entry handling out.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Almost all drivers set p_dev->conf.ConfigIndex to cfg->index in
the pcmcia_config_loop() callback function. Therefore, factor it out.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Use the config loop helper in (some) net pcmcia drivers.

CC: netdev@vger.kernel.org
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

The addition of an argument to dma_mapping_error() in commit
8d8bb39b "dma-mapping: add the device
argument to dma_mapping_error()" left a bit of fallout:

drivers/net/ibmveth.c:263: error: too few arguments to function 'dma_mapping_error'
drivers/net/ibmveth.c:264: error: expected ')' before 'goto'
drivers/net/ibmveth.c:284: error: expected expression before '}' token
drivers/net/ibmveth.c:297: error: too few arguments to function 'dma_mapping_error'
drivers/net/ibmveth.c:298: error: expected ')' before 'dma_unmap_single'
drivers/net/ibmveth.c:306: error: expected expression before '}' token
drivers/net/ibmveth.c:491: error: too few arguments to function 'dma_mapping_error'
drivers/net/ibmveth.c:927: error: too few arguments to function 'dma_mapping_error'
drivers/net/ibmveth.c:927: error: expected ')' before '{' token
drivers/net/ibmveth.c:974: error: expected expression before '}' token
drivers/net/ibmveth.c:914: error: label 'out' used but not defined m
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

make it atomic_long_t; while we are at it, get rid of useless checks in affs,
hfs and hpfs - ->open() always has it equal to 1, ->release() - to 0.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

If we can be sure that elevating the page_count on a pagecache page will
pin it, we can speculatively run this operation, and subsequently check to
see if we hit the right page rather than relying on holding a lock or
otherwise pinning a reference to the page.

This can be done if get_page/put_page behaves consistently throughout the
whole tree (ie.  if we "get" the page after it has been used for something
else, we must be able to free it with a put_page).

Actually, there is a period where the count behaves differently: when the
page is free or if it is a constituent page of a compound page.  We need
an atomic_inc_not_zero operation to ensure we don't try to grab the page
in either case.

This patch introduces the core locking protocol to the pagecache (ie.
adds page_cache_get_speculative, and tweaks some update-side code to make
it work).

Thanks to Hugh for pointing out an improvement to the algorithm setting
page_count to zero when we have control of all references, in order to
hold off speculative getters.

[kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()]
[hugh@veritas.com: fix add_to_page_cache]
[akpm@linux-foundation.org: repair a comment]
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Reviewed-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Acked-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER
architecture does:

This enables us to cleanly fix the Calgary IOMMU issue that some devices
are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423).

I think that per-device dma_mapping_ops support would be also helpful for
KVM people to support PCI passthrough but Andi thinks that this makes it
difficult to support the PCI passthrough (see the above thread).  So I
CC'ed this to KVM camp.  Comments are appreciated.

A pointer to dma_mapping_ops to struct dev_archdata is added.  If the
pointer is non NULL, DMA operations in asm/dma-mapping.h use it.  If it's
NULL, the system-wide dma_ops pointer is used as before.

If it's useful for KVM people, I plan to implement a mechanism to register
a hook called when a new pci (or dma capable) device is created (it works
with hot plugging).  It enables IOMMUs to set up an appropriate
dma_mapping_ops per device.

The major obstacle is that dma_mapping_error doesn't take a pointer to the
device unlike other DMA operations.  So x86 can't have dma_mapping_ops per
device.  Note all the POWER IOMMUs use the same dma_mapping_error function
so this is not a problem for POWER but x86 IOMMUs use different
dma_mapping_error functions.

The first patch adds the device argument to dma_mapping_error.  The patch
is trivial but large since it touches lots of drivers and dma-mapping.h in
all the architecture.

This patch:

dma_mapping_error() doesn't take a pointer to the device unlike other DMA
operations.  So we can't have dma_mapping_ops per device.

Note that POWER already has dma_mapping_ops per device but all the POWER
IOMMUs use the same dma_mapping_error function.  x86 IOMMUs use device
argument.

[akpm@linux-foundation.org: fix sge]
[akpm@linux-foundation.org: fix svc_rdma]
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix bnx2x]
[akpm@linux-foundation.org: fix s2io]
[akpm@linux-foundation.org: fix pasemi_mac]
[akpm@linux-foundation.org: fix sdhci]
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix sparc]
[akpm@linux-foundation.org: fix ibmvscsi]
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Avi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Removes legacy reinvent-the-wheel type thing. The generic
machinery integrates much better to automated debugging aids
such as kerneloops.org (and others), and is unambiguous due to
better naming. Non-intuively BUG_TRAP() is actually equal to
WARN_ON() rather than BUG_ON().
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update existing Mellanox copyright lines to 2008, and add such lines
to files where they are missing.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Enable ibmveth for Cooperative Memory Overcommitment (CMO).  For this driver
it means calculating a desired amount of IO memory based on the current MTU
and updating this value with the bus when MTU changes occur.  Because DMA
mappings can fail, we have added a bounce buffer for temporary cases where
the driver can not map IO memory for the buffer pool.

The following changes are made to enable the driver for CMO:
 * DMA mapping errors will not result in error messages if entitlement has
   been exceeded and resources were not available.
 * DMA mapping errors are handled gracefully, ibmveth_replenish_buffer_pool()
   is corrected to check the return from dma_map_single and fail gracefully.
 * The driver will have a get_desired_dma function defined to function
   in a CMO environment.
 * When the MTU is changed, the driver will update the device IO entitlement
Signed-off-by: NRobert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NSantiago Leon <santil@us.ibm.com>
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Activates larger rx buffer pools when the MTU is changed to a larger
value.  This patch de-activates the large rx buffer pools when the MTU
changes to a smaller value.
Signed-off-by: NSantiago Leon <santil@us.ibm.com>
Signed-off-by: NRobert Jennings <rcj@linux.vnet.ibm.com>
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

If we hack the virtio_net driver to always allocate full-sized (64k+)
skbuffs, the driver slows down (lguest numbers):

  Time to receive 1GB (small buffers): 10.85 seconds
  Time to receive 1GB (64k+ buffers): 24.75 seconds

Of course, large buffers use up more space in the ring, so we increase
that from 128 to 2048:

  Time to receive 1GB (64k+ buffers, 2k ring): 16.61 seconds

If we recycle pages rather than using alloc_page/free_page:

  Time to receive 1GB (64k+ buffers, 2k ring, recycle pages): 10.81 seconds

This demonstrates that with efficient allocation, we don't need to
have a separate "small buffer" queue.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Finally this patch lets virtio_net receive GSO packets in addition
to sending them.  This can definitely be optimised for the non-GSO
case.  For comparison the Xen approach stores one page in each skb
and uses subsequent skb's pages to construct an SG skb instead of
preallocating the maximum amount of pages per skb.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (added feature bits)

This patch adds some basic ethtool operations to virtio_net so
I could test SG without GSO (which was really useful because TSO
turned out to be buggy :)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (remove MTU setting)

On Mon, 2008-05-26 at 17:42 +1000, Rusty Russell wrote:
> If we fail to transmit a packet, we assume the queue is full and put
> the skb into last_xmit_skb.  However, if more space frees up before we
> xmit it, we loop, and the result can be transmitting the same skb twice.
>
> Fix is simple: set skb to NULL if we've used it in some way, and check
> before sending.
...
> diff -r 564237b31993 drivers/net/virtio_net.c
> --- a/drivers/net/virtio_net.c	Mon May 19 12:22:00 2008 +1000
> +++ b/drivers/net/virtio_net.c	Mon May 19 12:24:58 2008 +1000
> @@ -287,21 +287,25 @@ again:
>  	free_old_xmit_skbs(vi);
>
>  	/* If we has a buffer left over from last time, send it now. */
> -	if (vi->last_xmit_skb) {
> +	if (unlikely(vi->last_xmit_skb)) {
>  		if (xmit_skb(vi, vi->last_xmit_skb) != 0) {
>  			/* Drop this skb: we only queue one. */
>  			vi->dev->stats.tx_dropped++;
>  			kfree_skb(skb);
> +			skb = NULL;
>  			goto stop_queue;
>  		}
>  		vi->last_xmit_skb = NULL;

With this, may drop an skb and then later in the function discover that
we could have sent it after all. Poor wee skb :)

How about the incremental patch below?

Cheers,
Mark.

Subject: [PATCH] virtio_net: Delay dropping tx skbs

Currently we drop the skb in start_xmit() if we have a
queued buffer and fail to transmit it.

However, if we delay dropping it until we've stopped the
queue and enabled the tx notification callback, then there
is a chance space might become available for it.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

On 32-bit architectures PAGE_ALIGN() truncates 64-bit values to the 32-bit
boundary. For example:

	u64 val = PAGE_ALIGN(size);

always returns a value < 4GB even if size is greater than 4GB.

The problem resides in PAGE_MASK definition (from include/asm-x86/page.h for
example):

#define PAGE_SHIFT      12
#define PAGE_SIZE       (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK       (~(PAGE_SIZE-1))
...
#define PAGE_ALIGN(addr)       (((addr)+PAGE_SIZE-1)&PAGE_MASK)

The "~" is performed on a 32-bit value, so everything in "and" with
PAGE_MASK greater than 4GB will be truncated to the 32-bit boundary.
Using the ALIGN() macro seems to be the right way, because it uses
typeof(addr) for the mask.

Also move the PAGE_ALIGN() definitions out of include/asm-*/page.h in
include/linux/mm.h.

See also lkml discussion: http://lkml.org/lkml/2008/6/11/237

[akpm@linux-foundation.org: fix drivers/media/video/uvc/uvc_queue.c]
[akpm@linux-foundation.org: fix v850]
[akpm@linux-foundation.org: fix powerpc]
[akpm@linux-foundation.org: fix arm]
[akpm@linux-foundation.org: fix mips]
[akpm@linux-foundation.org: fix drivers/media/video/pvrusb2/pvrusb2-dvb.c]
[akpm@linux-foundation.org: fix drivers/mtd/maps/uclinux.c]
[akpm@linux-foundation.org: fix powerpc]
Signed-off-by: NAndrea Righi <righi.andrea@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Evgeniy Polyakov noticed that drivers/net/e1000e/netdev.c:e1000_netpoll()
was calling e1000_clean_tx_irq() without taking the TX lock.

David Miller suggested to remove the call altogether: since in this
callpah there's periodic calls to ->poll() anyway which will do
e1000_clean_tx_irq() and will garbage-collect any finished TX ring
descriptors.

This fix solved the e1000e+netconsole crashes i've been seeing:

=============================================================================
BUG skbuff_head_cache: Poison overwritten
-----------------------------------------------------------------------------

INFO: 0xf658ae9c-0xf658ae9c. First byte 0x6a instead of 0x6b
INFO: Allocated in __alloc_skb+0x2c/0x110 age=0 cpu=0 pid=5098
INFO: Freed in __kfree_skb+0x31/0x80 age=0 cpu=1 pid=4440
INFO: Slab 0xc16cc140 objects=16 used=1 fp=0xf658ae00 flags=0x400000c3
INFO: Object 0xf658ae00 @offset=3584 fp=0xf658af00
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If an mlx4 device with default FW (which gives a UAR BAR size of 8 MB)
is used in a system with 64 KB pages, then there are only 8192/64==128
UAR pages available.  However, the first 128 UAR pages are reserved
for use with event queue doorbells, so no UAR pages are available to
do anything else with, which means that the driver cannot work.

The current driver fails with a fairly cryptic "Failed to allocate
driver access region, aborting" message in this situation.  Fix the
driver to detect the problem earlier and print out a clearer
description of the problem and a suggestion of how to fix it (use a
new firmware image).
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Add support for the following operations to mlx4 when device firmware
supports them:

 - Send with invalidate and local invalidate send queue work requests;
 - Allocate/free fast register MRs;
 - Allocate/free fast register MR page lists;
 - Fast register MR send queue work requests;
 - Local DMA L_Key.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

They have never been used in this port of the driver. It is has only
ever been used on the ColdFire SoC ethernet core.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

This ifdefs are leftovers from the time as the driver was running
on a ppc.
Signed-off-by: NSebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

I found config FADS only in ppc/Kconfig. Bye bye relic.
Signed-off-by: NSebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

It is unnecessary, to stop queue and turn off carrier in shutdown
routine. With new netdev_queue this causes warnings.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

netif_carrier_{on,off}() handles starting and stopping packet
flow into the driver.  So there is no reason to invoke netif_stop_queue()
and netif_wake_queue() in response to link status events.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch reworks the error handling in r6040_init_one
in order not to leak resources and correcly unmap and release
PCI regions of the MAC. Also prefix printk's with the driver name
for clarity.
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch bumps the release of the r6040 driver. There has been
quite some versions of it out there, but this one is the one
people should report bugs against.
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch allows the MAC to handle the RX FIFO full
and no descriptor available interrupts. While we are at it
replace the TX interrupt with its corresponding definition.
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch changes the default waiting time of a packet, which
along with our previous r6040_rx path, was causing huge delays
with another host (160 to 230 ms).
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Define all the descriptor status the MAC can set.
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch completely reworks the RX path in order to be
more accurate about what is going on with the MAC.
We no longer read the error from the MLSR register instead read
the descriptor status register which reflects, the error per descriptor.
We now allocate skbs on the fly in r6040_rx, and we handle allocation
failure instead of simply dropping the packet. Remove the
rx_free_desc counter of r6040_private structure since we
allocate skbs in the RX path.

r6040_rx_buf_alloc is now removed and becomes unuseless.
Signed-Off-By: NJoerg Albert <jal2@gmx.de>
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

We did not call napi_disabled when putting down the interface
which should be done. Finally initialize lp->dev when everything
is set.
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Joseph Fannin <jfannin@gmail.com> and Takashi Iwai <tiwai@suse.de>
noticed that commit 073a345c
("mv643xx_eth: clarify irq masking and unmasking") broke the
mv643xx_eth build when NETPOLL is enabled, due to it not renaming
one instance of INT_CAUSE_EXT in mv643xx_eth_netpoll().  This patch
takes care of that instance as well.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Cc: Dale Farnsworth <dale@farnsworth.org>
Cc: Joseph Fannin <jfannin@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Rework the RX buffers allocation function so that we do not
leak memory in the case we could not allocate skbs for the
RX path. Propagate the errors to the r6040_up function
where we call the RX buffers allocation function.

Also rename the r6040_alloc_txbufs function to
r6040_init_txbufs, to reflect what it really does.
Signed-Off-By: NJoerg Albert <jal2@gmx.de>
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Add a helper function which only modifies R6040 MAC registers
use it when we timeout, and on adapter initialization. Fix
the scheduling while atomic but in the timeout routine due
to the reallocation of rx/tx buffers.
Signed-Off-By: NJoerg Albert <jal2@gmx.de>
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch fixes a null pointer access in r6040_rx due
to lp->dev not being initialized.

Fix the TX timeouts, TX irq was not re-enabled on RX irq
Signed-Off-By: NJoerg Albert <jal2@gmx.de>
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Prefix all functions inside the r6040 driver with r6040 to
avoid namespace clashing.
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch allows Windows Mobile 6 devices to be used for
tethering -- that is, used as modems.  It was requested by
AdamW in kernel bugzilla:

  http://bugzilla.kernel.org/show_bug.cgi?id=11119

and Mandriva kernel-discuss list.  It is tested and confirmed
to work by Peterl:

  http://forum.eeeuser.com/viewtopic.php?pid=323543#p323543

This patch is based on the patch in the above kernel bugzilla,
which is from the usb-rndis-lite tree.

[ dbrownell@users.sourceforge.net: misc fixes ]
Signed-off-by: NThomas Backlund <tmb@mandriva.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Use net_device_stats from net_device structure instead of local.
Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt>
Tested-by: NMarc Pignat <marc.pignat@hevs.ch>
Acked-by: NAndrew Victor <linux@maxim.org.za>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>