Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Enable relay in pseries config, ppc64_defconfig had it enabled but pseries
did not.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.

The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.

For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:

    can@3,100 {
            compatible = "philips,sja1000";
            reg = <3 0x100 0x80>;
            interrupts = <2 2>;
            interrupts = <2 8 1>;   // number, type, routing
            interrupt-parent = <&fpga_pic>;
    };
Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: NYuri Tikhonov <yur@emcraft.com>
Signed-off-by: NIlya Yanok <yanok@emcraft.com>
Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NDmitry Rakhchev <rda@emcraft.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Most of the code enabled by these options is __init, and it's much
more useful to actually run the tests.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Support for the PPC9A VME Single Board Computer from GE Fanuc (PowerPC
MPC8641D).

This is the default config file for GE Fanuc's PPC9A, a 6U single board
computer, based on Freescale's MPC8641D.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Update ps3_defconfig.

Sets these options:

  CONFIG_PS3_VRAM=m
  CONFIG_BLK_DEV_DM=m
  CONFIG_USB_HIDDEV=y
  CONFIG_EXT4_FS=y
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Defining flash partition table in platform code is deprecated, and due to
recent changes linkstation and storcenter do not compile any more with
their default configurations because of undefined references to
physmap_set_partitions(). Instead of fixing them by using the correct
kernel configuration macro in preprocessor conditional, remove partition
table definitions altogether. Instead add support for partition definition
on the command-line and in device tree to the default configurations.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Virtex FPGA designs have two serial port logic cores to choose from; the
simple uartlite, and the full featured uart16550.  Both cores are in
common use so the defconfig should support both of them.  Currently
only console on uartlite is supported in the defconfig.  This patch adds
console support for the 16550 core.

The Virtex reference designs do not work without this patch.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

The following options are enabled to support the digsy-mtc.
 - LXT phy
 - AT24 eeprom
 - RTC (DS1337)
 - MTD partitioning based on OF description
Signed-off-by: NGrzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

This patch contains initial framework for the AMCC Redwood board.
Signed-off-by: NMadhulika Madishetty <mmadishetty@amcc.com>
Signed-off-by: NTirumala Marri <tmarri@amcc.com>
Signed-off-by: NFeng Kan <fkan@amcc.com>
Signed-off-by: NVidhyananth Venkatasamy <vvenkatasamy@amcc.com>
Signed-off-by: NPreetesh Parekh <pparekh@amcc.com>
Acked-by: NLoc Ho <lho@amcc.com>
Acked-by: NFeng Kan <fkan@amcc.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

This adds the device-tree entries for a handful of devices on the
Canyonlands board, such as the EHCI and OHCI controllers, the real
time clock and the AD7414 thermal monitor.

I also updated the defconfig to enable various options related to
these devices.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

CONFIG_CC_OPTIMIZE_FOR_SIZE is selected, because otherwise the kernel
wouldn't boot. The AmigaOne's U-boot firmware seems to have a problem
loading uImages bigger than 1.8 MB.
Signed-off-by: NGerhard Pircher <gerhard_pircher@gmx.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

TSEC0 is connected to Vitesse 7385 5-port switch. The switch
isn't connected to any mdio bus, the link to the switch is fixed
to Full-duplex 1000 Mb/s (no pause).

This patch fixes following failure during bootup:

mdio@24520:01 not found
eth0: Could not attach to PHY
IP-Config: Failed to open eth0
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

This patch adds basic support for the 6 GPIO lines found on GE Fanucs SBC310 to the GE Fanuc GPIO driver.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Support for the SBC310 VPX Single Board Computer from GE Fanuc (PowerPC
MPC8641D).

This is the default config file for GE Fanuc's SBC310, a 3U single board
computer, based on Freescale's MPC8641D.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Now that all EEPROM drivers live in the same place, let's harmonize
their symbol names.

Also fix eeprom's dependencies, it definitely needs sysfs, and is no
longer experimental after many years in the kernel tree.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>

Update the multi-board configs for 2.6.29-rc2
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

Update the 44x defconfigs for 2.6.29-rc2
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

Update the 40x defconfigs for 2.6.29-rc2
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

To increase the amount of code that's built for a defconfig build.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Support for the FPGA based watchdog timer on GE Fanuc's SBC610.

This patch enables one of the watchdog timers found on the SBC610. There are
two identical watchdog timers at different offsets in the above mentioned
boards, however the current driver is only capable of supporting one of them.

The watchdog timers are also capable of generating interrupts at a
user-configurable threshold, though support for this operation is currently
not supported by the driver.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Enable SMP support on the MPC8572 DS reference board.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This is needed so that Vitesse 7385 5-port switch could work on
MPC8349E-mITX boards.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This removes CONFIG_PCI_LEGACY (which is not needed) and consequently
several compiler warnings.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

KVM host support was recently enabled in ppc44x_defconfig, but since then the
config option was renamed. Update ppc44x_defconfig to match.

Also, KVM guests aren't very interesting without networking, so enable
CONFIG_TUN and CONFIG_BRIDGE.
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

Adding use of newly added Epson RTX-8581 real-time clock driver to GE
Fanuc SBC610's dts file and adding driver to default config.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The Marvell PHY driver is currently being used for the 88E1111 on the
SBC610. This driver is causing the link to run in 10/Half mode, the generic
PHY driver is correctly configuring the PHY as 1000/Full.

Edit default config to use generic PHY driver.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Update defconfigs for running on Xilinx Virtex platforms
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Turned off CONFIG_PCI_LEGACY and turned on EXT4, and otherwise mostly
took the defaults.  This also updates ppc6xx_defconfig, which covers
the 6xx/7xx/7xxx-based embedded boards.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

unset CONFIG_PCI_LEGACY in the defconfigs as none of them enable
ISDN drivers which seem to be the only place we are using pci_find_device
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Update the PowerPC 44x defconfigs for 2.6.28
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

Update the PowerPC 40x defconfigs for 2.6.28
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

The current defconfig for Linkstation/Kuroboxes has the "Disable Heap
Randomization" option enabled.

Since some of these machines are facing the internet, it helps to have
heap randomization enabled. This patch enables it.
Signed-off-by: NRogério Brito <rbrito@ime.usp.br>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>