When working in DQA mode, if a queue is shared and a HW restart
occurs, there might be a possible race condition between
stations on the queues, and an existing queue might be left
with no queues.

To solve this, make sure in DQA mode to re-assign the same
queues as before the HW restart.
Signed-off-by: NLiad Kaufman <liad.kaufman@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

When sending the SCD_QUEUE_CONFIG command, the queue is
associated to a specific TID. If later there is a need to
use this TID on a different queue instead, it first needs to
be unassociated from the first queue.

Keep track for every queue what TID is associated with it.
Signed-off-by: NLiad Kaufman <liad.kaufman@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

When a shared queue becomes unshared, aggregations should be
re-enabled if they've existed before. Make sure that they do
this, if required.
Signed-off-by: NLiad Kaufman <liad.kaufman@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

For a000 devices there is a support of 64 bit DMA addressing.
The paging command was changed accordingly - support it.
Signed-off-by: NSara Sharon <sara.sharon@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Add support for installing and removing GMAC key
for newer FW versions that support GCM and MFP.
GMAC provides authentication and integrity for multicast management
frames.

Firmware API was changed, update the driver accordingly.
Signed-off-by: NAyala Beker <ayala.beker@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

The 9000 hardware will de-aggregate AMSDUs. In the process
it will copy the mac header "as is" to the new MPDUs.
This means driver should allow the same PN for MPDUs originated
from the same AMSDU.
Do that by incrementing the PN only for the last MPDU in the
sequence.
Signed-off-by: NSara Sharon <sara.sharon@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Minor overlapping changes for both merge conflicts.

Resolution work done by Stephen Rothwell was used
as a reference.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Buffers powersave frame test is reversed in cfg80211, fix from Felix
    Fietkau.

 2) Remove bogus WARN_ON in openvswitch, from Jarno Rajahalme.

 3) Fix some tg3 ethtool logic bugs, and one that would cause no
    interrupts to be generated when rx-coalescing is set to 0.  From
    Satish Baddipadige and Siva Reddy Kallam.

 4) QLCNIC mailbox corruption and napi budget handling fix from Manish
    Chopra.

 5) Fix fib_trie logic when walking the trie during /proc/net/route
    output than can access a stale node pointer.  From David Forster.

 6) Several sctp_diag fixes from Phil Sutter.

 7) PAUSE frame handling fixes in mlxsw driver from Ido Schimmel.

 8) Checksum fixup fixes in bpf from Daniel Borkmann.

 9) Memork leaks in nfnetlink, from Liping Zhang.

10) Use after free in rxrpc, from David Howells.

11) Use after free in new skb_array code of macvtap driver, from Jason
    Wang.

12) Calipso resource leak, from Colin Ian King.

13) mediatek bug fixes (missing stats sync init, etc.) from Sean Wang.

14) Fix bpf non-linear packet write helpers, from Daniel Borkmann.

15) Fix lockdep splats in macsec, from Sabrina Dubroca.

16) hv_netvsc bug fixes from Vitaly Kuznetsov, mostly to do with VF
    handling.

17) Various tc-action bug fixes, from CONG Wang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
  net_sched: allow flushing tc police actions
  net_sched: unify the init logic for act_police
  net_sched: convert tcf_exts from list to pointer array
  net_sched: move tc offload macros to pkt_cls.h
  net_sched: fix a typo in tc_for_each_action()
  net_sched: remove an unnecessary list_del()
  net_sched: remove the leftover cleanup_a()
  mlxsw: spectrum: Allow packets to be trapped from any PG
  mlxsw: spectrum: Unmap 802.1Q FID before destroying it
  mlxsw: spectrum: Add missing rollbacks in error path
  mlxsw: reg: Fix missing op field fill-up
  mlxsw: spectrum: Trap loop-backed packets
  mlxsw: spectrum: Add missing packet traps
  mlxsw: spectrum: Mark port as active before registering it
  mlxsw: spectrum: Create PVID vPort before registering netdevice
  mlxsw: spectrum: Remove redundant errors from the code
  mlxsw: spectrum: Don't return upon error in removal path
  i40e: check for and deal with non-contiguous TCs
  ixgbe: Re-enable ability to toggle VLAN filtering
  ixgbe: Force VLNCTRL.VFE to be set in all VMDq paths
  ...

Tom Herbert says:

====================
strp: Stream parser for messages

This patch set introduces a utility for parsing application layer
protocol messages in a TCP stream. This is a generalization of the
mechanism implemented of Kernel Connection Multiplexor.

This patch set adapts KCM to use the strparser. We expect that kTLS
can use this mechanism also. RDS would probably be another candidate
to use a common stream parsing mechanism.

The API includes a context structure, a set of callbacks, utility
functions, and a data ready function. The callbacks include
a parse_msg function that is called to perform parsing (e.g.
BPF parsing in case of KCM), and a rcv_msg function that is called
when a full message has been completed.

For strparser we specify the return codes from the parser to allow
the backend to indicate that control of the socket should be
transferred back to userspace to handle some exceptions in the
stream: The return values are:

      >0 : indicates length of successfully parsed message
       0  : indicates more data must be received to parse the message
       -ESTRPIPE : current message should not be processed by the
          kernel, return control of the socket to userspace which
          can proceed to read the messages itself
       other < 0 : Error is parsing, give control back to userspace
          assuming that synchronization is lost and the stream
          is unrecoverable (application expected to close TCP socket)

There is one issue I haven't been able to fully resolve. If parse_msg
returns ESTRPIPE (wants control back to userspace) the parser may
already have consumed some bytes of the message. There is no way to
put bytes back into the TCP receive queue and tcp_read_sock does not
allow an easy way to peek messages. In lieu of a better solution, we
return ENODATA on the socket to indicate that the data stream is
unrecoverable (application needs to close socket). This condition
should only happen if an application layer message header is split
across two skbuffs and parsing just the first skbuff wasn't sufficient
to determine the that transfer to userspace is needed.

This patch set contains:

  - strparser implementation
  - changes to kcm to use strparser
  - strparser.txt documentation

v2:
  - Add copyright notice to C files
  - Remove GPL module license from strparser.c
  - Add report of rxpause

v3:
  - Restore GPL module license
  - Use EXPORT_SYMBOL_GPL

v4:
  - Removed unused function, changed another to be static as suggested
    by davem
  - Rewoked data_ready to be called from upper layer, no longer requires
    taking over socket data_ready callback as suggested by Lance Chao

Tested:
  - Ran a KCM thrash test for 24 hours. No behavioral or performance
    differences observed.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adapt KCM to use the stream parser. This mostly involves removing
the RX handling and setting up the strparser using the interface.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch introduces a utility for parsing application layer protocol
messages in a TCP stream. This is a generalization of the mechanism
implemented of Kernel Connection Multiplexor.

The API includes a context structure, a set of callbacks, utility
functions, and a data ready function.

A stream parser instance is defined by a strparse structure that
is bound to a TCP socket. The function to initialize the structure
is:

int strp_init(struct strparser *strp, struct sock *csk,
              struct strp_callbacks *cb);

csk is the TCP socket being bound to and cb are the parser callbacks.

The upper layer calls strp_tcp_data_ready when data is ready on the lower
socket for strparser to process. This should be called from a data_ready
callback that is set on the socket:

void strp_tcp_data_ready(struct strparser *strp);

A parser is bound to a TCP socket by setting data_ready function to
strp_tcp_data_ready so that all receive indications on the socket
go through the parser. This is assumes that sk_user_data is set to
the strparser structure.

There are four callbacks.
 - parse_msg is called to parse the message (returns length or error).
 - rcv_msg is called when a complete message has been received
 - read_sock_done is called when data_ready function exits
 - abort_parser is called to abort the parser

The input to parse_msg is an skbuff which contains next message under
construction. The backend processing of parse_msg will parse the
application layer protocol headers to determine the length of
the message in the stream. The possible return values are:

   >0 : indicates length of successfully parsed message
   0  : indicates more data must be received to parse the message
   -ESTRPIPE : current message should not be processed by the
      kernel, return control of the socket to userspace which
      can proceed to read the messages itself
   other < 0 : Error is parsing, give control back to userspace
      assuming that synchronzation is lost and the stream
      is unrecoverable (application expected to close TCP socket)

In the case of error return (< 0) strparse will stop the parser
and report and error to userspace. The application must deal
with the error. To handle the error the strparser is unbound
from the TCP socket. If the error indicates that the stream
TCP socket is at recoverable point (ESTRPIPE) then the application
can read the TCP socket to process the stream. Once the application
has dealt with the exceptions in the stream, it may again bind the
socket to a strparser to continue data operations.

Note that ENODATA may be returned to the application. In this case
parse_msg returned -ESTRPIPE, however strparser was unable to maintain
synchronization of the stream (i.e. some of the message in question
was already read by the parser).

strp_pause and strp_unpause are used to provide flow control. For
instance, if rcv_msg is called but the upper layer can't immediately
consume the message it can hold the message and pause strparser.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While commit 9c706a49 ("net: ipconfig: fix use after free") avoids
the use after free, the resulting code still ends up calling both the
ic_setup_if() and ic_setup_routes() after calling ic_close_devs(), and
access to the device is still required.

Move the call to ic_close_devs() to the very end of the function.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Cong Wang says:

====================
net_sched: tc action fixes and updates

This patchset fixes a few regressions caused by the previous
code refactor and more. Thanks to Jamal for catching them!

Note, patch 3/7 and 4/7 are not strictly necessary for this patchset,
I just want to carry them together.

---
v4: adjust an indention for Jamal
    add two more patches

v3: avoid list for fast path, suggested by Jamal

v2: replace flex_array with regular dynamic array
    keep tcf_action_stats_update() in act_api.h
    fix macro typos found by Amir
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The act_police uses its own code to walk the
action hashtable, which leads to that we could
not flush standalone tc police actions, so just
switch to tcf_generic_walker() like other actions.

(Joint work from Roman and Cong.)
Signed-off-by: NRoman Mashak <mrv@mojatatu.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jamal reported a crash when we create a police action
with a specific index, this is because the init logic
is not correct, we should always create one for this
case. Just unify the logic with other tc actions.

Fixes: a03e6fe5 ("act_police: fix a crash during removal")
Reported-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As pointed out by Jamal, an action could be shared by
multiple filters, so we can't use list to chain them
any more after we get rid of the original tc_action.
Instead, we could just save pointers to these actions
in tcf_exts, since they are refcount'ed, so convert
the list to an array of pointers.

The "ugly" part is the action API still accepts list
as a parameter, I just introduce a helper function to
convert the array of pointers to a list, instead of
relying on the C99 feature to iterate the array.

Fixes: a85a970a ("net_sched: move tc_action into tcf_common")
Reported-by: NJamal Hadi Salim <jhs@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

struct tcf_exts belongs to filters, should not be visible
to plain tc actions.

Cc: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is harmless because all users pass 'a' to this macro.

Fixes: 00175aec ("net/sched: Macro instead of CONFIG_NET_CLS_ACT ifdef")
Cc: Amir Vadai <amir@vadai.me>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This list_del() for tc action is not needed actually,
because we only use this list to chain bulk operations,
therefore should not be carried for latter operations.

Fixes: ec0595cc ("net_sched: get rid of struct tcf_common")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After refactoring tc_action into tcf_common, we no
longer need to cleanup temporary "actions" in list,
they are permanently stored in the hashtable.

Fixes: a85a970a ("net_sched: move tc_action into tcf_common")
Reported-by: NJamal Hadi Salim <jhs@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Simon Wunderlich says:

====================
pull request for net-next: batman-adv 2016-08-16

This feature patchset is all about adding netlink support, which should
supersede our debugfs configuration interface in the long run. It is
especially necessary when batman-adv should be used in different
namespaces, since debugfs can not differentiate between those.

More specifically, the following changes are included:

 - Two fixes for namespace handling by Andrew Lunn, checking also the
   namespaces for parent interfaces, and supress debugfs entries
   for non-default netns

 - Implement various netlink commands for the new interface, by
   Matthias Schiffer, Andrew Lunn, Sven Eckelmann and Simon Wunderlich
   (13 patches):
    * routing algorithm list
    * hardif list
    * translation tables (local and global)
    * TTVN for the translation tables
    * originator and neighbor tables for B.A.T.M.A.N. IV
      and B.A.T.M.A.N. V
    * gateway dump functionality for B.A.T.M.A.N. IV
      and B.A.T.M.A.N. V
    * Bridge Loop Avoidance claims, and corresponding BLA group
    * Bridge Loop Avoidance backbone tables

 - Finally, mark batman-adv as netns compatible, by Andrew Lunn (1 patch)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2016-08-16

This series contains fixes to e1000e, igb, ixgbe and i40e.

Kshitiz Gupta provides a fix for igb to resolve the PHY delay compensation
math in several functions.

Jarod Wilson provides a fix for e1000e which had to broken up into 2
patches, first is prepares the driver for expanding the list of NICs
that have occasional ~10 hour clock jumps when being used for PTP.
Second patch actually fixes i218 silicon which has been experiencing
the clock jumps while using PTP.

Alex provides 2 patches for ixgbe now that he is back at Intel.  First
fixes setting VLNCTRL.VFE bit, which was left unchanged in earlier patches
which resulted in disabling VLAN filtering for all the VFs.  Second
corrects the support for disabling the VLAN tag filtering via the
feature bit.

Lastly, David fixes i40e which was causing a kernel panic when
non-contiguous traffic classes or traffic classes not starting with TC0,
were configured on a link partner switch.  To fix this, changed the
logic when determining the total number of TCs enabled.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: IPv4 UC router fixes

Ido says:
Patches 1-3 fix a long standing problem in the driver's init sequence,
which manifests itself quite often when routing daemons try to configure
an IP address on registered netdevs that don't yet have an associated
vPort.

Patches 4-9 add missing packet traps for the router to work properly and
also fix ordering issue following the recent changes to the driver's init
sequence.

The last patch isn't related to the router, but fixes a general problem
in which under certain conditions packets aren't trapped to CPU.

v1->v2:
- Change order of patch 7
- Add patch 6 following Ilan's comment
- Add patchset name and cover letter
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When packets enter the device they are classified to a priority group
(PG) buffer based on their PCP value. After their egress port and
traffic class are determined they are moved to the switch's shared
buffer and await transmission, if:

(Ingress{Port}.Usage < Thres && Ingress{Port,PG}.Usage < Thres &&
 Egress{Port}.Usage < Thres && Egress{Port,TC}.Usage < Thres)
||
(Ingress{Port}.Usage < Min || Ingress{Port,PG} < Min ||
 Egress{Port}.Usage < Min || Egress{Port,TC}.Usage < Min)

Packets scheduled to transmission through CPU port (trapped to CPU) use
traffic class 7, which has a zero maximum and minimum quotas. However,
when such packets arrive from PG 0 they are admitted to the shared
buffer as PG 0 has a non-zero minimum quota.

Allow all packets to be trapped to the CPU - regardless of the PG they
were classified to - by assigning a 10KB minimum quota for CPU port and
TC7.

Fixes: 8e8dfe9f ("mlxsw: spectrum: Add IEEE 802.1Qaz ETS support")
Reported-by: NTamir Winetroub <tamirw@mellanox.com>
Tested-by: NTamir Winetroub <tamirw@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Before destroying the 802.1Q FID we should first remove the VID-to-FID
mapping. This makes mlxsw_sp_fid_destroy() symmetric with regards to
mlxsw_sp_fid_create().

Fixes: 14d39461 ("mlxsw: spectrum: Use per-FID struct for the VLAN-aware bridge")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While going over the code I noticed we are missing two rollbacks in the
port's creation error path. Add them and adjust the place of one of them
in the port's removal sequence so that both are symmetric.

Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ralue pack function needs to set op, otherwise it is 0 for add always.

Fixes: d5a1c749 ("mlxsw: reg: Add Router Algorithmic LPM Unicast Entry Register definition")
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

One of the conditions to generate an ICMP Redirect Message is that "the
packet is being forwarded out the same physical interface that it was
received from" (RFC 1812).

Therefore, we need to be able to trap such packets and let the kernel
decide what to do with them.

For each RIF, enable the loop-back filter, which will raise the LBERROR
trap whenever the ingress RIF equals the egress RIF.

Fixes: 99724c18 ("mlxsw: spectrum: Introduce support for router interfaces")
Reported-by: NIlan Tayari <ilant@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the following traps:

1) MTU Error: Trap packets whose size is bigger than the egress RIF's
MTU. If DF bit isn't set, traffic will continue to be routed in slow
path.

2) TTL Error: Trap packets whose TTL expired. This allows traceroute to
work properly.

3) OSPF packets.

Fixes: 7b27ce7b ("mlxsw: spectrum: Add traps needed for router implementation")
Signed-off-by: NElad Raz <eladr@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit bbf2a475 ("mlxsw: spectrum: Initialize ports at the end of
init sequence") moved ports initialization to the end of the init
sequence, which means ports are the first to be removed during fini.

Since the FDB delayed work is still active when ports are removed it's
possible for it to process FDB notifications of inactive ports,
resulting in a warning message.

Fix that by marking ports as inactive only after unregistering them. The
NETDEV_UNREGISTER event will invoke bridge's driver port removal
sequence that will cause the FDB (and FDB notifications) to be flushed.

Fixes: bbf2a475 ("mlxsw: spectrum: Initialize ports at the end of init sequence")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After registering a netdevice it's possible for user space applications
to configure an IP address on it. From the driver's perspective, this
means a router interface (RIF) should be created for the PVID vPort.

Therefore, we must create the PVID vPort before registering the
netdevice.

Fixes: 99724c18 ("mlxsw: spectrum: Introduce support for router interfaces")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, when device configuration fails we emit errors to the kernel
log despite the fact we already get these from the EMAD transaction
layer, so remove them.

In addition to being unnecessary, removing these error messages will
allow us to reuse mlxsw_sp_port_add_vid() to create the PVID vPort
before registering the netdevice.

Fixes: 99724c18 ("mlxsw: spectrum: Introduce support for router interfaces")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When removing a VLAN filter from the device we shouldn't return upon the
first error we encounter, as otherwise we'll have resources that will
never be freed nor used.

Instead, we should keep trying to free as much resources as possible in
a best effort mode.

Remove the error message as well, since we already get these from the
EMAD transaction code.

Fixes: 99724c18 ("mlxsw: spectrum: Introduce support for router interfaces")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull power supply fixes from Sebastian Reichel.

* tag 'for-v4.8-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power_supply: tps65217-charger: fix missing platform_set_drvdata()
  power: reset: hisi-reboot: Unmap region obtained by of_iomap
  power: reset: reboot-mode: fix build error of missing ioremap/iounmap on UM
  power: supply: max17042_battery: fix model download bug.

Pull virtio/vhost fixes from Michael Tsirkin:
 - test fixes
 - a vsock fix

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  tools/virtio: add dma stubs
  vhost/test: fix after swiotlb changes
  vhost/vsock: drop space available check for TX vq
  ringtest: test build fix

Pull s390 fixes from Martin Schwidefsky:
 "A couple of bug fixes, minor cleanup and a change to the default
  config"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/dasd: fix failing CUIR assignment under LPAR
  s390/pageattr: handle numpages parameter correctly
  s390/dasd: fix hanging device after clear subchannel
  s390/qdio: avoid reschedule of outbound tasklet once killed
  s390/qdio: remove checks for ccw device internal state
  s390/qdio: fix double return code evaluation
  s390/qdio: get rid of spin_lock_irqsave usage
  s390/cio: remove subchannel_id from ccw_device_private
  s390/qdio: obtain subchannel_id via ccw_device_get_schid()
  s390/cio: stop using subchannel_id from ccw_device_private
  s390/config: make the vector optimized crc function builtin
  s390/lib: fix memcmp and strstr
  s390/crc32-vx: Fix checksum calculation for small sizes
  s390: clarify compressed image code path

Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

   - Missing ULL suffixes for 64-bit constants in sha3.
   - Two caam AEAD regressions.
   - Bogus setkey hooks in non-hmac caam hashes.
   - Missing kbuild dependency for powerpc crc32c"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: caam - fix non-hmac hashes
  crypto: powerpc - CRYPT_CRC32C_VPMSUM should depend on ALTIVEC
  crypto: caam - defer aead_set_sh_desc in case of zero authsize
  crypto: caam - fix echainiv(authenc) encrypt shared descriptor
  crypto: sha3 - Add missing ULL suffixes for 64-bit constants

The i40e driver was causing a kernel panic when
non-contiguous Traffic Classes, or Traffic Classes not
starting with TC0, were configured on a link partner switch.
i40e does not support non-contiguous TCs.

To fix this, the patch changes the logic when determining
the total number of TCs enabled.  Before, this would use the
highest TC number enabled and assume that all TCs below it were
also enabled.  Now, we create a bitmask of enabled TCs and scan
it to determine not only the number of TCs, but also if the set
of enabled TCs starts at zero and is contiguous.  If not, then
DCB is disabled by only returning one TC.
Signed-off-by: NDave Ertman <david.m.ertman@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Back when I submitted the GSO code I messed up and dropped the support for
disabling the VLAN tag filtering via the feature bit.  This patch
re-enables the use of the NETIF_F_HW_VLAN_CTAG_FILTER to enable/disable the
VLAN filtering independent of toggling promiscuous mode.

Fixes: b83e3010 ("ixgbe/ixgbevf: Add support for GSO partial")
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>