It's the last bio-only REQ_* flag, and we have space for it in the bio
bi_flags field.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NShaun Tancheff <shaun.tancheff@seagate.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Right now, if slice is expired, we start a new slice. If a bio is
queued, we keep on extending slice by throtle_slice interval (100ms).

This worked well as long as pending timer function got executed with-in
few milli seconds of scheduled time. But looks like with recent changes
in timer subsystem, slack can be much longer depending on the expiry time
of the scheduled timer.

commit 500462a9 ("timers: Switch to a non-cascading wheel")

This means, by the time timer function gets executed, it is possible the
delay from scheduled time is more than 100ms. That means current code
will conclude that existing slice has expired and a new one needs to
be started. New slice will be 100ms by default and that will not be
sufficient to meet rate requirement of group given the bio size and
bio will not be dispatched and we will start a new timer function to
wait. And when that timer expires, same process will repeat and we
will wait again and this can easily be an infinite loop.

Solve this issue by starting a new slice only if throttle gropup is
empty. If it is not empty, that means there should be an active slice
going on. Ideally it should not be expired but given the slack, it is
possible that it has expired.
Reported-by: NHou Tao <houtao1@huawei.com>
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Since commit 63a4cc24, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.

No intended functional changes in this commit.
Signed-off-by: NJens Axboe <axboe@fb.com>

'nr_undestroyed_grps' in struct throtl_data was used to count
the number of throtl_grp related with throtl_data, but now
throtl_grp is tracked by blkcg_gq, so it is useless anymore.
Signed-off-by: NHou Tao <houtao1@huawei.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

if trace isn't enabled, parsing cgroup path just wastes cpu
Signed-off-by: NShaohua Li <shli@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

cgroup_on_dfl() tests whether the cgroup's root is the default
hierarchy; however, an individual controller is only interested in
whether the controller is attached to the default hierarchy and never
tests a cgroup which doesn't belong to the hierarchy that the
controller is attached to.

This patch replaces cgroup_on_dfl() tests in controllers with faster
static_key based cgroup_subsys_on_dfl().  This leaves cgroup core as
the only user of cgroup_on_dfl() and the function is moved from the
header file to cgroup.c.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NZefan Li <lizefan@huawei.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>

blkcg interface grew to be the biggest of all controllers and
unfortunately most inconsistent too.  The interface files are
inconsistent with a number of cloes duplicates.  Some files have
recursive variants while others don't.  There's distinction between
normal and leaf weights which isn't intuitive and there are a lot of
stat knobs which don't make much sense outside of debugging and expose
too much implementation details to userland.

In the unified hierarchy, everything is always hierarchical and
internal nodes can't have tasks rendering the two structural issues
twisting the current interface.  The interface has to be updated in a
significant anyway and this is a good chance to revamp it as a whole.
This patch implements blkcg interface for the unified hierarchy.

* (from a previous patch) blkcg is identified by "io" instead of
  "blkio" on the unified hierarchy.  Given that the whole interface is
  updated anyway, the rename shouldn't carry noticeable conversion
  overhead.

* The original interface consisted of 27 files is replaced with the
  following three files.

  blkio.stat	: per-blkcg stats
  blkio.weight	: per-cgroup and per-cgroup-queue weight settings
  blkio.max	: per-cgroup-queue bps and iops max limits

Documentation/cgroups/unified-hierarchy.txt updated accordingly.

v2: blkcg_policy->dfl_cftypes wasn't removed on
    blkcg_policy_unregister() corrupting the cftypes list.  Fixed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

tg_set_conf() is largely consisted of parsing and setting the new
config and the follow-up application and propagation.  This patch
separates out the latter part into tg_conf_updated().  This will be
used to implement interface for the unified hierarchy.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, blkg_conf_prep() expects input to be of the following form

 MAJ:MIN NUM

and reads the NUM part into blkg_conf_ctx->v.  This is quite
restrictive and gets in the way in implementing blkcg interface for
the unified hierarchy.  This patch updates blkg_conf_prep() so that it
expects

 MAJ:MIN BODY_STR

where BODY_STR is an arbitrary string.  blkg_conf_ctx->v is replaced
with ->body which is a char pointer pointing to the start of BODY_STR.
Parsing of the body is moved to blkg_conf_prep()'s callers.

To allow using, for example, strsep() on blkg_conf_ctx->val, it is a
non-const pointer and to accommodate that const is dropped from @input
too.

This doesn't cause any behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

blkcg is about to grow interface for the unified hierarchy.  Add
legacy to existing cftypes.

* blkcg_policy->cftypes -> blkcg_policy->legacy_cftypes
* blk-cgroup.c:blkcg_files -> blkcg_legacy_files
* cfq-iosched.c:cfq_blkcg_files -> cfq_blkcg_legacy_files
* blk-throttle.c:throtl_files -> throtl_legacy_files

Pure renames.  No functional change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, both cfq-iosched and blk-throttle keep track of
io_service_bytes and io_serviced stats.  While keeping track of them
separately may be useful during development, it doesn't make much
sense otherwise.  Also, blk-throttle was counting bio's as IOs while
cfq-iosched request's, which is more confusing than informative.

This patch adds ->stat_bytes and ->stat_ios to blkg (blkcg_gq),
removes the counterparts from cfq-iosched and blk-throttle and let
them print from the common blkg counters.  The common counters are
incremented during bio issue in blkcg_bio_issue_check().

The outputs are still filtered by whether the policy has
blkg_policy_data on a given blkg, so cfq's output won't show up if it
has never been used for a given blkg.  The only times when the outputs
would differ significantly are when policies are attached on the fly
or elevators are switched back and forth.  Those are quite exceptional
operations and I don't think they warrant keeping separate counters.

v3: Update blkio-controller.txt accordingly.

v2: Account IOs during bio issues instead of request completions so
    that bio-based drivers can be handled the same way.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

blkcg_[rw]stat are used as stat counters for blkcg policies.  It isn't
per-cpu by itself and blk-throttle makes it per-cpu by wrapping around
it.  This patch makes blkcg_[rw]stat per-cpu and drop the ad-hoc
per-cpu wrapping in blk-throttle.

* blkg_[rw]stat->cnt is replaced with cpu_cnt which is struct
  percpu_counter.  This makes syncp unnecessary as remote accesses are
  handled by percpu_counter itself.

* blkg_[rw]stat_init() can now fail due to percpu allocation failure
  and thus are updated to return int.

* percpu_counters need explicit freeing.  blkg_[rw]stat_exit() added.

* As blkg_rwstat->cpu_cnt[] can't be read directly anymore, reading
  and summing results are stored in ->aux_cnt[] instead.

* Custom per-cpu stat implementation in blk-throttle is removed.

This makes all blkcg stat counters per-cpu without complicating policy
implmentations.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

blkg (blkcg_gq) currently is created by blkcg policies invoking
blkg_lookup_create() which ends up repeating about the same code in
different policies.  Theoretically, this can avoid the overhead of
looking and/or creating blkg's if blkcg is enabled but no policy is in
use; however, the cost of blkg lookup / creation is very low
especially if only the root blkcg is in use which is highly likely if
no blkcg policy is in active use - it boils down to a single very
predictable conditional and surrounding RCU protection.

This patch consolidates blkg creation to a new function
blkcg_bio_issue_check() which is called during bio issue from
generic_make_request_checks().  blkcg_bio_issue_check() is now the
only function which tries to create missing blkg's.  The subsequent
policy and request_list operations just perform blkg_lookup() and if
missing falls back to the root.

* blk_get_rl() no longer tries to create blkg.  It uses blkg_lookup()
  instead of blkg_lookup_create().

* blk_throtl_bio() is now called from blkcg_bio_issue_check() with rcu
  read locked and blkg already looked up.  Both throtl_lookup_tg() and
  throtl_lookup_create_tg() are dropped.

* cfq is similarly updated.  cfq_lookup_create_cfqg() is replaced with
  cfq_lookup_cfqg()which uses blkg_lookup().

This consolidates blkg handling and avoids unnecessary blkg creation
retries under memory pressure.  In addition, this provides a common
bio entry point into blkcg where things like common accounting can be
performed.

v2: Build fixes for !CONFIG_CFQ_GROUP_IOSCHED and
    !CONFIG_BLK_DEV_THROTTLING.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

If a queue is bypassing, all blkcg policies should become noops but
blk-throttle wasn't.  It only became noop if the queue was dying.
While this wouldn't lead to an oops as falling back to the root blkg
is safe in this case, this can be a bit surprising - a bypassing queue
could still be applying throttle limits.

Fix it by removing blk_queue_dying() test in throtl_lookup_create_tg()
and testing blk_queue_bypass() in blk_throtl_bio() and bypassing
before doing anything else.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, both throttle and cfq policies implement their own root
blkg (blkcg_gq) lookup fast path.  This patch moves root blkg
optimization from throtl_lookup_tg() to __blkg_lookup().  cfq-iosched
currently doesn't use blkg_lookup() but will be converted and drop the
optimization too.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The newly added ->pd_alloc_fn() and ->pd_free_fn() deal with pd
(blkg_policy_data) while the older ones use blkg (blkcg_gq).  As using
blkg doesn't make sense for ->pd_alloc_fn() and after allocation pd
can always be mapped to blkg and given that these are policy-specific
methods, it makes sense to converge on pd.

This patch makes all methods deal with pd instead of blkg.  Most
conversions are trivial.  In blk-cgroup.c, a couple method invocation
sites now test whether pd exists instead of policy state for
consistency.  This shouldn't cause any behavioral differences.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

With the recent addition of alloc and free methods, things became
messier.  This patch reorganizes them according to the followings.

* ->pd_alloc_fn()

  Responsible for allocation and static initializations - the ones
  which can be done independent of where the pd might be attached.

* ->pd_init_fn()

  Initializations which require the knowledge of where the pd is
  attached.

* ->pd_free_fn()

  The counter part of pd_alloc_fn().  Static de-init and freeing.

This leaves ->pd_exit_fn() without any users.  Removed.

While at it, collapse an one liner function throtl_pd_exit(), which
has only one user, into its user.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Because percpu allocator couldn't do non-blocking allocations,
blk-throttle was forced to implement an ad-hoc asynchronous allocation
mechanism for its percpu stats for cases where blkg's (blkcg_gq's) are
allocated from an IO path without sleepable context.

Now that percpu allocator can handle gfp_mask and blkg_policy_data
alloc / free are handled by policy methods, the ad-hoc asynchronous
allocation mechanism can be replaced with direct allocation from
tg_stats_alloc_fn().  Rit it out.

This ensures that an active throtl_grp always has valid non-NULL
->stats_cpu.  Remove checks on it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

A blkg (blkcg_gq) represents the relationship between a cgroup and
request_queue.  Each active policy has a pd (blkg_policy_data) on each
blkg.  The pd's were allocated by blkcg core and each policy could
request to allocate extra space at the end by setting
blkcg_policy->pd_size larger than the size of pd.

This is a bit unusual but was done this way mostly to simplify error
handling and all the existing use cases could be handled this way;
however, this is becoming too restrictive now that percpu memory can
be allocated without blocking.

This introduces two new mandatory blkcg_policy methods - pd_alloc_fn()
and pd_free_fn() - which are used to allocate and release pd for a
given policy.  As pd allocation is now done from policy side, it can
simply allocate a larger area which embeds pd at the beginning.  This
change makes ->pd_size pointless.  Removed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

cgroup aware writeback support will require exposing some of blkcg
details.  In preprataion, move block/blk-cgroup.h to
include/linux/blk-cgroup.h.  This patch is pure file move.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

When reading blkio.throttle.io_serviced in a recently created blkio
cgroup, it's possible to race against the creation of a throttle policy,
which delays the allocation of stats_cpu.

Like other functions in the throttle code, just checking for a NULL
stats_cpu prevents the following oops caused by that race.

[ 1117.285199] Unable to handle kernel paging request for data at address 0x7fb4d0020
[ 1117.285252] Faulting instruction address: 0xc0000000003efa2c
[ 1137.733921] Oops: Kernel access of bad area, sig: 11 [#1]
[ 1137.733945] SMP NR_CPUS=2048 NUMA PowerNV
[ 1137.734025] Modules linked in: bridge stp llc kvm_hv kvm binfmt_misc autofs4
[ 1137.734102] CPU: 3 PID: 5302 Comm: blkcgroup Not tainted 3.19.0 #5
[ 1137.734132] task: c000000f1d188b00 ti: c000000f1d210000 task.ti: c000000f1d210000
[ 1137.734167] NIP: c0000000003efa2c LR: c0000000003ef9f0 CTR: c0000000003ef980
[ 1137.734202] REGS: c000000f1d213500 TRAP: 0300   Not tainted  (3.19.0)
[ 1137.734230] MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI>  CR: 42008884  XER: 20000000
[ 1137.734325] CFAR: 0000000000008458 DAR: 00000007fb4d0020 DSISR: 40000000 SOFTE: 0
GPR00: c0000000003ed3a0 c000000f1d213780 c000000000c59538 0000000000000000
GPR04: 0000000000000800 0000000000000000 0000000000000000 0000000000000000
GPR08: ffffffffffffffff 00000007fb4d0020 00000007fb4d0000 c000000000780808
GPR12: 0000000022000888 c00000000fdc0d80 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 000001003e120200 c000000f1d5b0cc0 0000000000000200 0000000000000000
GPR24: 0000000000000001 c000000000c269e0 0000000000000020 c000000f1d5b0c80
GPR28: c000000000ca3a08 c000000000ca3dec c000000f1c667e00 c000000f1d213850
[ 1137.734886] NIP [c0000000003efa2c] .tg_prfill_cpu_rwstat+0xac/0x180
[ 1137.734915] LR [c0000000003ef9f0] .tg_prfill_cpu_rwstat+0x70/0x180
[ 1137.734943] Call Trace:
[ 1137.734952] [c000000f1d213780] [d000000005560520] 0xd000000005560520 (unreliable)
[ 1137.734996] [c000000f1d2138a0] [c0000000003ed3a0] .blkcg_print_blkgs+0xe0/0x1a0
[ 1137.735039] [c000000f1d213960] [c0000000003efb50] .tg_print_cpu_rwstat+0x50/0x70
[ 1137.735082] [c000000f1d2139e0] [c000000000104b48] .cgroup_seqfile_show+0x58/0x150
[ 1137.735125] [c000000f1d213a70] [c0000000002749dc] .kernfs_seq_show+0x3c/0x50
[ 1137.735161] [c000000f1d213ae0] [c000000000218630] .seq_read+0xe0/0x510
[ 1137.735197] [c000000f1d213bd0] [c000000000275b04] .kernfs_fop_read+0x164/0x200
[ 1137.735240] [c000000f1d213c80] [c0000000001eb8e0] .__vfs_read+0x30/0x80
[ 1137.735276] [c000000f1d213cf0] [c0000000001eb9c4] .vfs_read+0x94/0x1b0
[ 1137.735312] [c000000f1d213d90] [c0000000001ebb38] .SyS_read+0x58/0x100
[ 1137.735349] [c000000f1d213e30] [c000000000009218] syscall_exit+0x0/0x98
[ 1137.735383] Instruction dump:
[ 1137.735405] 7c6307b4 7f891800 409d00b8 60000000 60420000 3d420004 392a63b0 786a1f24
[ 1137.735471] 7d49502a e93e01c8 7d495214 7d2ad214 <7cead02a> e9090008 e9490010 e9290018

And here is one code that allows to easily reproduce this, although this
has first been found by running docker.

void run(pid_t pid)
{
	int n;
	int status;
	int fd;
	char *buffer;
	buffer = memalign(BUFFER_ALIGN, BUFFER_SIZE);
	n = snprintf(buffer, BUFFER_SIZE, "%d\n", pid);
	fd = open(CGPATH "/test/tasks", O_WRONLY);
	write(fd, buffer, n);
	close(fd);
	if (fork() > 0) {
		fd = open("/dev/sda", O_RDONLY | O_DIRECT);
		read(fd, buffer, 512);
		close(fd);
		wait(&status);
	} else {
		fd = open(CGPATH "/test/blkio.throttle.io_serviced", O_RDONLY);
		n = read(fd, buffer, BUFFER_SIZE);
		close(fd);
	}
	free(buffer);
	exit(0);
}

void test(void)
{
	int status;
	mkdir(CGPATH "/test", 0666);
	if (fork() > 0)
		wait(&status);
	else
		run(getpid());
	rmdir(CGPATH "/test");
}

int main(int argc, char **argv)
{
	int i;
	for (i = 0; i < NR_TESTS; i++)
		test();
	return 0;
}
Reported-by: NRicardo Marin Matinata <rmm@br.ibm.com>
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJens Axboe <axboe@fb.com>

sane_behavior has been used as a development vehicle for the default
unified hierarchy.  Now that the default hierarchy is in place, the
flag became redundant and confusing as its usage is allowed on all
hierarchies.  There are gonna be either the default hierarchy or
legacy ones.  Let's make that clear by removing sane_behavior support
on non-default hierarchies.

This patch replaces cgroup_sane_behavior() with cgroup_on_dfl().  The
comment on top of CGRP_ROOT_SANE_BEHAVIOR is moved to on top of
cgroup_on_dfl() with sane_behavior specific part dropped.

On the default and legacy hierarchies w/o sane_behavior, this
shouldn't cause any behavior differences.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Acked-by: NLi Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>

Convert all cftype->write_string() users to the new cftype->write()
which maps directly to kernfs write operation and has full access to
kernfs and cgroup contexts.  The conversions are mostly mechanical.

* @css and @cft are accessed using of_css() and of_cft() accessors
  respectively instead of being specified as arguments.

* Should return @nbytes on success instead of 0.

* @buf is not trimmed automatically.  Trim if necessary.  Note that
  blkcg and netprio don't need this as the parsers already handle
  whitespaces.

cftype->write_string() has no user left after the conversions and
removed.

While at it, remove unnecessary local variable @p in
cgroup_subtree_control_write() and stale comment about
CGROUP_LOCAL_BUFFER_SIZE in cgroup_freezer.c.

This patch doesn't introduce any visible behavior changes.

v2: netprio was missing from conversion.  Converted.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NAristeu Rozanski <arozansk@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Acked-by: NLi Zefan <lizefan@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: "David S. Miller" <davem@davemloft.net>

Fix 4 coccinelle warnings.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJens Axboe <axboe@fb.com>

blk_throtl_dispatch_work_fn is only used in blk-throttle.c

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJens Axboe <axboe@fb.com>

cftype->write_string() just passes on the writeable buffer from kernfs
and there's no reason to add const restriction on the buffer.  The
only thing const achieves is unnecessarily complicating parsing of the
buffer.  Drop const from @buffer.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>                                           
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>

cftype->max_write_len is used to extend the maximum size of writes.
It's interpreted in such a way that the actual maximum size is one
less than the specified value.  The default size is defined by
CGROUP_LOCAL_BUFFER_SIZE.  Its interpretation is quite confusing - its
value is decremented by 1 and then compared for equality with max
size, which means that the actual default size is
CGROUP_LOCAL_BUFFER_SIZE - 2, which is 62 chars.

There's no point in having a limit that low.  Update its definition so
that it means the actual string length sans termination and anything
below PAGE_SIZE-1 is treated as PAGE_SIZE-1.

.max_write_len for "release_agent" is updated to PATH_MAX-1 and
cgroup_release_agent_write() is updated so that the redundant strlen()
check is removed and it uses strlcpy() instead of strcpy().
.max_write_len initializations in blk-throttle.c and cfq-iosched.c are
no longer necessary and removed.  The one in cpuset is kept unchanged
as it's an approximated value to begin with.

This will also make transition to kernfs smoother.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

In preparation of conversion to kernfs, cgroup file handling is
updated so that it can be easily mapped to kernfs.  This patch
replaces cftype->read_seq_string() with cftype->seq_show() which is
not limited to single_open() operation and will map directcly to
kernfs seq_file interface.

The conversions are mechanical.  As ->seq_show() doesn't have @css and
@cft, the functions which make use of them are converted to use
seq_css() and seq_cft() respectively.  In several occassions, e.f. if
it has seq_string in its name, the function name is updated to fit the
new method better.

This patch does not introduce any behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NAristeu Rozanski <arozansk@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NDaniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: NLi Zefan <lizefan@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Neil Horman <nhorman@tuxdriver.com>

Immutable biovecs are going to require an explicit iterator. To
implement immutable bvecs, a later patch is going to add a bi_bvec_done
member to this struct; for now, this patch effectively just renames
things.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Alex Elder <elder@inktank.com>
Cc: ceph-devel@vger.kernel.org
Cc: Joshua Morris <josh.h.morris@us.ibm.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: Benny Halevy <bhalevy@tonian.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Ben Myers <bpm@sgi.com>
Cc: xfs@oss.sgi.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: "Roger Pau Monné" <roger.pau@citrix.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchand@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Peng Tao <tao.peng@emc.com>
Cc: Andy Adamson <andros@netapp.com>
Cc: fanchaoting <fanchaoting@cn.fujitsu.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Pankaj Kumar <pankaj.km@samsung.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Mel Gorman <mgorman@suse.de>6

Now that seqcounts are lockdep enabled objects, we need to explicitly
initialize runtime allocated seqcounts so that lockdep can track them.

Without this patch, Fengguang was seeing:

  [    4.127282] INFO: trying to register non-static key.
  [    4.128027] the code is fine but needs lockdep annotation.
  [    4.128027] turning off the locking correctness validator.
  [    4.128027] CPU: 0 PID: 96 Comm: kworker/u4:1 Not tainted 3.12.0-next-20131108-10601-gbad570d #2
  [    4.128027] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  [    ...     ]
  [    4.128027] Call Trace:
  [    4.128027]  [<7908e744>] ? console_unlock+0x353/0x380
  [    4.128027]  [<79dc7cf2>] dump_stack+0x48/0x60
  [    4.128027]  [<7908953e>] __lock_acquire.isra.26+0x7e3/0xceb
  [    4.128027]  [<7908a1c5>] lock_acquire+0x71/0x9a
  [    4.128027]  [<794079aa>] ? blk_throtl_bio+0x1c3/0x485
  [    4.128027]  [<7940658b>] throtl_update_dispatch_stats+0x7c/0x153
  [    4.128027]  [<794079aa>] ? blk_throtl_bio+0x1c3/0x485
  [    4.128027]  [<794079aa>] blk_throtl_bio+0x1c3/0x485
  ...

Use u64_stats_init() for all affected data structures, which initializes
the seqcount.
Reported-and-Tested-by: NFengguang Wu <fengguang.wu@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
[ Folded in another fix from the mailing list as well as a fix to that fix. Tweaked commit message. ]
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1384314134-6895-1-git-send-email-john.stultz@linaro.org
[ So I actually think that the two SOBs from PeterZ are the right depiction of the patch route. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Previously, all css descendant iterators didn't include the origin
(root of subtree) css in the iteration.  The reasons were maintaining
consistency with css_for_each_child() and that at the time of
introduction more use cases needed skipping the origin anyway;
however, given that css_is_descendant() considers self to be a
descendant, omitting the origin css has become more confusing and
looking at the accumulated use cases rather clearly indicates that
including origin would result in simpler code overall.

While this is a change which can easily lead to subtle bugs, cgroup
API including the iterators has recently gone through major
restructuring and no out-of-tree changes will be applicable without
adjustments making this a relatively acceptable opportunity for this
type of change.

The conversions are mostly straight-forward.  If the iteration block
had explicit origin handling before or after, it's moved inside the
iteration.  If not, if (pos == origin) continue; is added.  Some
conversions add extra reference get/put around origin handling by
consolidating origin handling and the rest.  While the extra ref
operations aren't strictly necessary, this shouldn't cause any
noticeable difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Acked-by: NAristeu Rozanski <aris@redhat.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>

cgroup is currently in the process of transitioning to using css
(cgroup_subsys_state) as the primary handle instead of cgroup in
subsystem API.  For hierarchy iterators, this is beneficial because

* In most cases, css is the only thing subsystems care about anyway.

* On the planned unified hierarchy, iterations for different
  subsystems will need to skip over different subtrees of the
  hierarchy depending on which subsystems are enabled on each cgroup.
  Passing around css makes it unnecessary to explicitly specify the
  subsystem in question as css is intersection between cgroup and
  subsystem

* For the planned unified hierarchy, css's would need to be created
  and destroyed dynamically independent from cgroup hierarchy.  Having
  cgroup core manage css iteration makes enforcing deref rules a lot
  easier.

Most subsystem conversions are straight-forward.  Noteworthy changes
are

* blkio: cgroup_to_blkcg() is no longer used.  Removed.

* freezer: cgroup_freezer() is no longer used.  Removed.

* devices: cgroup_to_devcgroup() is no longer used.  Removed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Acked-by: NAristeu Rozanski <aris@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Jens Axboe <axboe@kernel.dk>

cgroup is currently in the process of transitioning to using struct
cgroup_subsys_state * as the primary handle instead of struct cgroup.
Please see the previous commit which converts the subsystem methods
for rationale.

This patch converts all cftype file operations to take @css instead of
@cgroup.  cftypes for the cgroup core files don't have their subsytem
pointer set.  These will automatically use the dummy_css added by the
previous patch and can be converted the same way.

Most subsystem conversions are straight forwards but there are some
interesting ones.

* freezer: update_if_frozen() is also converted to take @css instead
  of @cgroup for consistency.  This will make the code look simpler
  too once iterators are converted to use css.

* memory/vmpressure: mem_cgroup_from_css() needs to be exported to
  vmpressure while mem_cgroup_from_cont() can be made static.
  Updated accordingly.

* cpu: cgroup_tg() doesn't have any user left.  Removed.

* cpuacct: cgroup_ca() doesn't have any user left.  Removed.

* hugetlb: hugetlb_cgroup_form_cgroup() doesn't have any user left.
  Removed.

* net_cls: cgrp_cls_state() doesn't have any user left.  Removed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Acked-by: NAristeu Rozanski <aris@redhat.com>
Acked-by: NDaniel Wagner <daniel.wagner@bmw-carit.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Steven Rostedt <rostedt@goodmis.org>

With the recent updates, blk-throttle is finally ready for proper
hierarchy support.  Dispatching now honors service_queue->parent_sq
and propagates correctly.  The only thing missing is setting
->parent_sq correctly so that throtl_grp hierarchy matches the cgroup
hierarchy.

This patch updates throtl_pd_init() such that service_queues form the
same hierarchy as the cgroup hierarchy if sane_behavior is enabled.
As this concludes proper hierarchy support for blkcg, the shameful
.broken_hierarchy tag is removed from blkio_subsys.

v2: Updated blkio-controller.txt as suggested by Vivek.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>

blk_throtl_bio() has a quick exit path for throtl_grps without limits
configured.  It looks at the bps and iops limits and if both are not
configured, the bio is issued immediately.  While this is correct in
the current flat hierarchy as each throtl_grp behaves completely
independently, it would become wrong in proper hierarchy mode.  A
group without any limits could still be limited by one of its
ancestors and bio's queued for such group should not bypass
blk-throtl.

As having a quick bypass mechanism is beneficial, this patch
reimplements the mechanism such that it's correct even with proper
hierarchy.  throtl_grp->has_rules[] is added.  These booleans are
updated for the whole subtree whenever a config is updated so that
has_rules[] of the whole subtree stays synchronized.  They're also
updated when a new throtl_grp comes online so that it can't escape the
limits of its ancestors.

As no throtl_grp has another throtl_grp as parent now, this patch
doesn't yet make any behavior differences.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NVivek Goyal <vgoyal@redhat.com>

With the planned proper hierarchy support, a bio will climb up the
tree before actually being dispatched. This makes sure bio is also
subjected to parent's throttling limits, if any.

It might happen that parent is idle and when bio is transferred to
parent, a new slice starts fresh. But that is incorrect as parents
wait time should have started when bio was queued in child group and
causes IOs to be throttled more than configured as they climb the
hierarchy.

Given the fact that we have not written hierarchical algorithm in a
way where child's and parents time slices are synchronized, we
transfer the child's start time to parent if parent was idling.  If
parent was busy doing dispatch of other bios all this while, this is
not an issue.

Child's slice start time is passed to parent. Parent looks at its
last expired slice start time. If child's start time is after parents
old start time, that means parent had been idle and after parent
went idle, child had an IO queued. So use child's start time as
parent start time.

If parent's start time is after child's start time, that means,
when IO got queued in child group, parent was not idle. But later
it dispatched some IO, its slice got trimmed and then it went idle.
After a while child's request got shifted in parent group. In this
case use parent's old start time as new start time as that's the
duration of slice we did not use.

This logic is far from perfect as if there are multiple childs
then first child transferring the bio decides the start time while
a bio might have queued up even earlier in other child, which is
yet to be transferred up to parent. In that case we will lose
time and bandwidth in parent. This patch is just an approximation
to make situation somewhat better.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

With flat hierarchy, there's only single level of dispatching
happening and fairness beyond that point is the responsibility of the
rest of the block layer and driver, which usually works out okay;
however, with the planned hierarchy support,
service_queue->bio_lists[] can be filled up by bios from a single
source.  While the limits would still be honored, it'd be very easy to
starve IOs from siblings or children.

To avoid such starvation, this patch implements throtl_qnode and
converts service_queue->bio_lists[] to lists of per-source qnodes
which in turn contains the bio's.  For example, when a bio is
dispatched from a child group, the bio doesn't get queued on
->bio_lists[] directly but it first gets queued on the group's qnode
which in turn gets queued on service_queue->queued[].  When
dispatching for the upper level, the ->queued[] list is consumed in
round-robing order so that the dispatch windows is consumed fairly by
all IO sources.

There are two ways a bio can come to a throtl_grp - directly queued to
the group or dispatched from a child.  For the former
throtl_grp->qnode_on_self[rw] is used.  For the latter, the child's
->qnode_on_parent[rw].

Note that this means that the child which is contributing a bio to its
parent should stay pinned until all its bios are dispatched to its
grand-parent.  This patch moves blkg refcnting from bio add/remove
spots to qnode activation/deactivation so that the blkg containing an
active qnode is always pinned.  As child pins the parent, this is
sufficient for keeping the relevant sub-tree pinned while bios are in
flight.

The starvation issue was spotted by Vivek Goyal.

v2: The original patch used the same throtl_grp->qnode_on_self/parent
    for reads and writes causing RWs to be queued incorrectly if there
    already are outstanding IOs in the other direction.  They should
    be throtl_grp->qnode_on_self/parent[2] so that READs and WRITEs
    can use different qnodes.  Spotted by Vivek Goyal.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NVivek Goyal <vgoyal@redhat.com>

throtl_pending_timer_fn() currently assumes that the parent_sq is the
top level one and the bio's dispatched are ready to be issued;
however, this assumption will be wrong with proper hierarchy support.
This patch makes the following changes to make
throtl_pending_timer_fn() ready for hiearchy.

* If the parent_sq isn't the top-level one, update the parent
  throtl_grp's dispatch time and schedule the next dispatch as
  necessary.  If the parent's dispatch time is now, repeat the
  function for the parent throtl_grp.

* If the parent_sq is the top-level one, kick issue work_item as
  before.

* The debug message printed by throtl_log() now prints out the
  service_queue's nr_queued[] instead of the total nr_queued as the
  latter becomes uninteresting and misleading with hierarchical
  dispatch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NVivek Goyal <vgoyal@redhat.com>

tg_dispatch_one_bio() currently assumes that the parent_sq is the top
level one and the bio being dispatched is ready to be issued; however,
this assumption will be wrong with proper hierarchy support.  This
patch makes the following changes to make tg_dispatch_on_bio() ready
for hiearchy.

* throtl_data->nr_queued[] is incremented in blk_throtl_bio() instead
  of throtl_add_bio_tg() so that throtl_add_bio_tg() can be used to
  transfer a bio from a child tg to its parent.

* tg_dispatch_one_bio() is updated to distinguish whether its parent
  is another throtl_grp or the throtl_data.  If former, the bio is
  transferred to the parent throtl_grp using throtl_add_bio_tg().  If
  latter, the bio is ready to be issued and put on the top-level
  service_queue's bio_lists[] and throtl_data->nr_queued is
  decremented.

As all throtl_grps currently have the top level service_queue as their
->parent_sq, this patch in itself doesn't make any behavior
difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NVivek Goyal <vgoyal@redhat.com>

Currently, blk_throtl_bio() issues the passed in bio directly if it's
within limits of its associated tg (throtl_grp).  This behavior
becomes incorrect with hierarchy support as the bio should be
accounted to and throttled by the ancestor throtl_grps too.

This patch makes the direct issue path of blk_throtl_bio() to loop
until it reaches the top-level service_queue or gets throttled.  If
the former, the bio can be issued directly; otherwise, it gets queued
at the first layer it was above limits.

As tg->parent_sq is always the top-level service queue currently, this
patch in itself doesn't make any behavior differences.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NVivek Goyal <vgoyal@redhat.com>