- 10 2月, 2009 2 次提交
-
-
由 Samuel Ortiz 提交于
The iwl_rxon_cmd is really just a iwl3945_rxon_cmd structure extension. So, we can use the *_rxon fields from iwl_priv instead of the 3945 specific ones (*39_rxon). We have to then be careful when submitting REPLY_RXON host commands, since the command length as to be set according to the HW. As another precaution the reserved4 and reserved5 fields are cleared before being sent to the 3945. With the *39_rxon removal, a lot of duplicated code can be removed from the 3945 code base. Signed-off-by: NSamuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andrey Borzenkov 提交于
Fix errors and obvious warnings reported by checkpatch in all files except orinoco.c. Orinoco.c is part of different patch series of Dave. Signed-off-by: NAndrey Borzenkov <arvidjaar@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 09 2月, 2009 5 次提交
-
-
由 Herbert Xu 提交于
gro: Optimise TCP packet reception As this function can be called more than half a million times for 10GbE, it's important to optimise it as much as we can. This patch uses bit ops to logical ops, as well as open coding memcmp to exploit alignment properties. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
As this function can be called more than half a million times for 10GbE, it's important to optimise it as much as we can. This patch does some obvious changes to use 2-byte and 4-byte operations instead of byte-oriented ones where possible. Bit ops are also used to replace logical ops to reduce branching. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch optimises the Ethernet header comparison to use 2-byte and 4-byte xors instead of memcmp. In order to facilitate this, the actual comparison is now carried out by the callers of the shared dev_gro_receive function. This has a significant impact when receiving 1500B packets through 10GbE. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch prepares for the move of the same_flow checks out of dev_gro_receive. As such we need to remember the number of held packets since doing a loop just to count them every time is silly. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Several devices need to insert some "pre headers" in front of the main packet data when they transmit a packet. Currently we allocate only 16 bytes of pad room and this ends up not being enough for some types of hardware (NIU, usb-net, s390 qeth, etc.) So increase this to 32. Note that drivers still need to check in their transmit routine whether enough headroom exists, and if not use skb_realloc_headroom(). Tunneling, IPSEC, and other encapsulation methods can cause the padding area to be used up. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 2月, 2009 33 次提交
-
-
由 David S. Miller 提交于
Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/iwlwifi/iwl3945-base.c
-
由 Jesse Brandeburg 提交于
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Update the version number to 1.3.16 and update copyright dates for 2009. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch addresses two minor items I found while cleaning up the igb driver for our sourceforge version. The first clears the context index if we don't flag that we need it. The second item is that eims_other should be used instead of bit defines when setting all of the EICS bits prior to reset. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
It was seen with repeated interface up/down testing that there was a large stray between the stats reported by the queues and the stats reported by the HW. It was found to be an issue in that hw stats were being reset without first being recorded. This change records the stats before wiping them from the system via the reset. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Remove the setting of ring->count variables from igb_probe as they are duplicating the same configuration that is done igb_alloc_queues. Remove the err_hw_init tag as it can be replaced by err_sw_init. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
The disable_av variable is never used by the driver and provides no value as it is likely a leftover debugging variable. I have removed it and replaced the one spot that checked for it with a check for a valid address. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
As additional hardware is added to the igb driver it is easier to support the expansion via switch statements instead of using nested ifs. For this reason I am changing this to a switch statement. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Move igb_get_hw_control up so that it is called just after the reset in igb_resume. This notifies the HW sooner that the driver is reassuming control of the device. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
The interrupt handler was reading eicr and then doing nothing with the result. I have removed the variable and the register read since they provide no value to the legacy interrupt handler. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
There were several spots in the code making calls to adapter->hw when they could have just been accessing hw-> directly. I cleaned up the spots where this was visibly apparent. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
There isn't much point in having the _82575 hanging off the end of this function since there aren't any other version of this function running around within this driver. This also allows for a bit of whitespace cleanup due to a shorter function name. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
The igb watchdog task is modifying the watchdog timer twice duing a single run. It only needs to be called once to reschedule itself for 2 seconds from the last time it ran. In addition I removed the allocation of the mac_info structure since it is only called twice and is easier to access via the e1000_hw struct. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch cleans up igb_netpoll so that it is more friendly with both the current napi and newly introduced GRO features. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Add a counter for dma out of sync errors reported via interrupt. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Most of the code for the testing has pretty much become stale at this point and is need of update. This update just streamlines most of the code, widens the range of interrupt testing. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This driver is currently using HW_CSUM which is not correct. Update this to use the IP_CSUM and IPV6_CSUM flags. In addition consolidate the TSO flag setting. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This statistic is not used and so it is safe to remove Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
All of the nvm ops have the tag _nvm added to the end which is redundant since all of the calls to the ops have to go through the nvm ops struct anyway. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch renames write_phy_reg to write_reg and read_phy_reg to read_reg. It seems redundant to call out phy in an operation that is part of the phy_ops struct. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Instead of pulling the mac address from EEPROM it is easier to pull it from the RAL/RAH registers and then just copy it into the address structures. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch makes dev_spec a union and simplifies it so that it does not require dynamic allocation and freeing in the driver. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Add a link check function to contain all activities related to verifying that the link is present. The current approach is a bit cludgy and needs to be cleaned up. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Since igb supports only pci-e nics and there is no plan to support any legacy pci parts in the driver there isn't really much need for checking to see if an io port is needed. In the unlikely event that we do begin supporting legacy pci parts then we can see about adding this code back to the driver. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch moves the initialization of the number of queues into set_interrupt_capability. This allows the number of queues to increase in the unlikely event that the system initially fails to allocate enough msi-x interrupts, does a suspend/resume, and then can allocate enough interrupts on resume. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
buffsz is being repeatedly set when allocaing buffers. Since this value should only need to be set once in the function I am moving it out of the looped portion of the path. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
While cleaning up the skb_over panic with small frames I found there was room for improvement in the ordering of operations within the rx receive flow. These changes will place the prefetch for the next descriptor to a point earlier in the rx path. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Unfortunately, the OF device tree nodes for SBUS and PCI hme devices have the same device node name on some systems. So if the name of the parent node isn't 'sbus', skip it. Based upon an excellent report and detective work by Meelis Roos and Eric Brower. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Tested-by: NMeelis Roos <mroos@linux.ee>
-
由 Peter P Waskiewicz Jr 提交于
Now that our set_num_queues() routines for each feature are re-entrant, and can be called at any point, they shouldn't zero out the feature's indices or mask bits. Subsequent calls into those routines for those features can result in zero Rx and Tx queues being assigned, causing a panic later in driver reinitialization. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ayaz Abdulla 提交于
This patch bumps the version up to 63 Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ayaz Abdulla 提交于
This patch adds another type of recoverable error to the driver. It also modifies the sequence for recovery to include a mac reset and clearing of interrupts. Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ayaz Abdulla 提交于
This patch fixes the ethtool tx csum "set" command. A recent patch was submitted to remove HW_CSUM and use IP_CSUM instead. Therefore, the corresponding ethtool command should also be modified. Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ayaz Abdulla 提交于
This patch fixes an issue with the suspend/resume cycle with msi interrupts. See bugzilla number 10487 for more details. The fix is to re-setup a private msi pci config offset field. Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-