- 26 6月, 2006 40 次提交
-
-
由 Hans Verkuil 提交于
V4L2_CID_MPEG_STREAM_VBI_FMT controls if and how VBI data is embedded in an MPEG stream. Currently only one format is supported: the format designed for the ivtv driver. This should be extended with new standard formats (such as defined for DVB) in the future. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
Fixes the weird and incorrect condition in VIDIOC_S_FREQUENCY. The tuner should always be switched to the mode specified in the v4l2_frequency struct. Much simpler and also corresponding to the v4l2 specification. The old condition made it impossible to switch from radio to analog tv mode using VIDIOC_S_FREQUENCY. Instead the (tv) frequency would be given to the radio tuner. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
HM12 is a YUV 4:1:1 format used by the cx2341x MPEG encoder/decoder for the raw YUV input/output. The Y and UV planes are broken up in 16x16 macroblocks and each macroblock is transmitted in turn (row by row). Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Tim Kaiser 提交于
Added support for the msp34x5 audio dac. Analog sound output of Technotrend DVB-C 2300 (aka Hauppauge Nexus-CA) works now. Signed-off-by: NTim Kaiser <timkaiser@t-online.de> Signed-off-by: NMarco Schluessler <marco@lordzodiac.de> Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Manu Abraham 提交于
Thanks to Oliver Endriss for spotting this. Signed-off-by: NManu Abraham <manu@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
This patch creates a new Kconfig menu option, entitled, "Blackbird MPEG encoder support (cx2388x + cx23416)" so that the cx88-blackbird mpeg encoder module can be chosen separately. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
The cx2341x mpeg encoder module is used by cx88-blackbird, pvrusb2 and the external ivtv driver. This patch allows for cx2341x to be selected without having to also select cx88-blackbird. This will be needed to build the external ivtv driver or the standalone pvrusb2 driver against kernel 2.6.18 Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Adrian Bunk 提交于
remove the following unused hooks: - cx88-blackbird.c: cx88_ioctl_hook() - cx88-blackbird.c: cx88_ioctl_translator() make the following needlessly global functions static: - cx88-tvaudio.c: cx88_detect_nicam() remove the following unused EXPORT_SYMBOL's: - cx88-cards.c: cx88_bcount - cx88-cards.c: cx88_subids - cx88-cards.c: cx88_idcount - cx88-cards.c: cx88_card_list - cx88-cards.c: cx88_card_setup - cx88-core.c: cx88_start_audio_dma - cx88-core.c: cx88_stop_audio_dma - cx88-i2c.c: cx88_i2c_init Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Manu Abraham 提交于
Thanks to Johannes Stezenbach for pointing it out Signed-off-by: NManu Abraham <manu@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Malcolm Parsons 提交于
binfmt_flat.c calls set_personality with PER_LINUX as the personality. On the arm architecture this results in the program running in 26bit usermode. PER_LINUX_32BIT should be used instead. This doesn't affect other architectures that use binfmt_flat. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Change enable_irq() macro to be a statement, not expression. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Fix PLL setting for the Coldfire 5249 CPU. This brings it into line with the new style frequency configuration of m68knommu parts. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Fix flush code for the ColdFire 5206/5206e/5272 cases. Add support for the new ColdFire 532x CPU family Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Philippe De Muyter 提交于
Here is a patch to the system call handling for 5307/5272/etc to: - fix the strace support (one tested the wrong bit) - make all system calls a little bit faster by inlining set_esp0 and supporting ENOSYS out of the critical path. - remove extraneous spaces Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
This patch solve a bug triggered by execvp (this function use calloc to store the argument list and gcc 3.4.x align the stack to word, not to dword). This situation aren't related to signal handling and all 2.6.x have the bug. On ColdFire targets we must force the stack to be aligned. Original patch from Andrea Tarani <andrea.tarani@gilbarco.com>, Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Remove list of fixed clock frequency options used for configuring master clock, and make field an int. Much more flexible this way, no need to add more options for every new used freqency. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Remove list of fixed clock frequency options used for configuring master clock, and make field an int. Much more flexible this way, no need to add more options for every new used freqency. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Add support for the AVNET 5282 board. Patch submitted by Daniel Alomar <dalomar@serrasold.com>. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Add configure support for the new Freescale 532x family of CPUs. Patch submitted by Matt Waddel <Matt.Waddel@freescale.com>. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
This reverts commits 3e3318de [PATCH] swsusp: x86_64 mark special saveable/unsaveable pages b6370d96 [PATCH] swsusp: i386 mark special saveable/unsaveable pages ce4ab001 [PATCH] swsusp: add architecture special saveable pages support because not only do they apparently cause page faults on x86, the infrastructure doesn't compile on powerpc. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Add build support for the new Freescale 532x CPU platforms. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Add support for the UART addressing on the new Freescale M532x CPU family. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Add build support for new Freescale M532x CPU family timer. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
A cleanup of m68knommu/kernel/setup.c : - No need to initialize global pointers to NULL, they will have that value automatically, and they eat up space in my data segment image in FLASH. - Remove get_cpuinfo. It has been replaced by show_cpuinfo. Signed-off-by: NPhilippe De Muyter <phdm@macqel.be> Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Don't rely on DEBUG having a value, check for it being defined. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Include the ColdFire 532x support when including ColdFire peripharp support definitions. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Add cache init support for the new ColdFire 532x CPU family. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
ColdFire serial driver support for the new 532x CPU family UARTs. Patch submitted by Matt Waddel <Matt.Waddel@freescale.com>. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Register definitions for the new Freescale 532x Coldfire CPU family. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Add kernel startup code for the new Freescale 532x CPU family. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Modify the m68knommu/ColdFire PIT timer code to use register offsets with raw_read/raw_write access, instead of a mapped struct. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Remove use of rom_length. It serves not real purpose, and when we move to new stye RAM configuration it will not be needed. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Switch to naming the architecture config options for the m68knommu branch as "M68K", dropping "M68KNOMMU". The CONFIG_MMU separates the 2 now, and the m68knommu branch is still strictly speaking an M68K (including the ColdFire parts). Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Modify the m68knommu/ColdFire core timer code to use register offsets with raw_read/raw_write access, instead of a mapped struct. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Specify the struct mapping used on the new Freescale 532x CPU family's FEC ethernet core. Patch submitted by Matt Waddel <Matt.Waddel@freescale.com>. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Nathan Scott <nathans@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/iser: iSER Kconfig and Makefile IB/iser: iSER handling of memory for RDMA IB/iser: iSER RDMA CM (CMA) and IB verbs interaction IB/iser: iSER initiator iSCSI PDU and TX/RX IB/iser: iSCSI iSER transport provider high level code IB/iser: iSCSI iSER transport provider header file IB/uverbs: Remove unnecessary list_del()s IB/uverbs: Don't free wr list when it's known to be empty
-
由 Linus Torvalds 提交于
Trond had apparently merged the same patch twice, causing a duplicate include of the "internal.h" file, with resulting obvious confusion. Tssk. I'm the only one allowed to send out trees that don't even compile! Who does this Trond guy think he is? Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Björn Steinbrink 提交于
Copy the softirq bits in preempt_count from the current context into the hardirq context when using 4K stacks to make the softirq_count macro work correctly and thereby fix softirq cpu time accounting. Signed-off-by: NBjörn Steinbrink <B.Steinbrink@gmx.de> Acked-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-