Add missing MMX/SSE opcode groups to x86 opcode map.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20091017000736.16556.29061.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add verbose failure messages to kprobe-tracer for debugging.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20091017000728.16556.16713.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Update kprobe-tracer selftest since command syntax has been
changed.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20091017000720.16556.26343.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Enables 'perf probe' even if libdwarf is not installed. If libdwarf is
not found, 'perf probe' just disables dwarf support. Users can use
'perf probe' to set up new events by using kprobe_events format.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
LKML-Reference: <20091007222830.1684.25665.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Add perf probe subcommand that implements a kprobe-event setup helper
to the perf command.
This allows user to define kprobe events using C expressions (C line
numbers, C function names, and C local variables).

Usage
-----
 perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...]

    -k, --vmlinux <file>  vmlinux/module pathname
    -P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@src]|@src:LINE [ARG ...]>
                          probe point definition, where
		p:	kprobe probe
		r:	kretprobe probe
		GRP:	Group name (optional)
		NAME:	Event name
		FUNC:	Function name
		OFFS:	Offset from function entry (in byte)
		SRC:	Source code path
		LINE:	Line number
		ARG:	Probe argument (local variable name or
			kprobe-tracer argument format is supported.)

Changes in v4:
 - Add _GNU_SOURCE macro for strndup().

Changes in v3:
 - Remove -r option because perf always be used for online kernel.
 - Check malloc/calloc results.

Changes in v2:
 - Check synthesized string length.
 - Rename perf kprobe to perf probe.
 - Use spaces for separator and update usage comment.
 - Check error paths in parse_probepoint().
 - Check optimized-out variables.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Rename probe-common fixed field names to harder conflictable names,
because current 'ip', 'func', and other probe field names are easily in
conflict with user-specified variable names.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
LKML-Reference: <20091007222814.1684.407.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Check whether the argument name is in conflict with other field names
while creating a kprobe through the debugfs interface.

Changes in v3:
 - Check strcmp() == 0 instead of !strcmp().

Changes in v2:
 - Add common_lock_depth to reserved name list.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
LKML-Reference: <20091007222807.1684.26880.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Rename special variables to more self-explainable names as below:
- $rv to $retval
- $sa to $stack
- $aN to $argN
- $sN to $stackN
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
LKML-Reference: <20091007222759.1684.3319.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Remove '$ra' (return address) because it is already shown at the head of
each entry.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
LKML-Reference: <20091007222748.1684.12711.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Add $ prefix to the special variables(e.g. sa, rv) of kprobe-tracer.
This resolves consistency issues between kprobe_events and perf-kprobe.

The main goal is to avoid conflicts between local variable names of
probed functions, used by perf probe, and special variables used
in the kprobe event creation interface (stack values, etc...) and
also available from perf probe.

ie: we don't want rv (return value) to conflict with a local variable
named rv in a probed function.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
LKML-Reference: <20091007222740.1684.91170.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Check result of event_create_dir() and add ftrace_event_call to
ftrace_events list only if it is succeeded. Thanks to Li for pointing
it out.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20090925182054.10157.55219.stgit@omoto>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Add VIA processor's Padlock instructions(MONTMUL, XSHA1, XSHA256)
as parts of the kernel may use them.

This fixes the following crash in opcodes decoder selftests:

 make[2]: `scripts/unifdef' is up to date.
   TEST    posttest
 Error: c145cf71:        f3 0f a6 d0             repz xsha256
 Error: objdump says 4 bytes, but insn_get_length() says 3 (attr:0)
 make[1]: *** [posttest] Error 2
 make: *** [bzImage] Error 2
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20090925182037.10157.3180.stgit@omoto>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Use new percpu global event buffer instead of stack in kprobe
tracer while tracing through perf.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20090925182011.10157.60140.stgit@omoto>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Conflicts:
	kernel/trace/Makefile
	kernel/trace/trace.h
	kernel/trace/trace_event_types.h
	kernel/trace/trace_export.c

Merge reason:
	Sync with latest significant tracing core changes.

* 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6:
  Add MAINTAINERS entry for ARM/INTEL IXP4xx arch support.
  ixp4xx: arch_idle() documentation fixup
  ixp4xx: timer and clocks cleanups

Fix new kernel-doc warnings in serial_core.[hc] files.

  Warning(include/linux/serial_core.h:485): No description found for parameter 'uport'
  Warning(include/linux/serial_core.h:485): Excess function parameter 'port' description in 'uart_handle_dcd_change'
  Warning(include/linux/serial_core.h:511): No description found for parameter 'uport'
  Warning(include/linux/serial_core.h:511): Excess function parameter 'port' description in 'uart_handle_cts_change'
  Warning(drivers/serial/serial_core.c:2437): No description found for parameter 'uport'
  Warning(drivers/serial/serial_core.c:2437): Excess function parameter 'port' description in 'uart_add_one_port'
  Warning(drivers/serial/serial_core.c:2509): No description found for parameter 'uport'
  Warning(drivers/serial/serial_core.c:2509): Excess function parameter 'port' description in 'uart_remove_one_port'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit ebd2c8f6 removed struct uart_info and
commit bdc04e31 further moved delta_msr_wait.
Fix up the MN10300 on-chip serial port drivers to comply with this.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use asm/generic-hardirq.h to build asm/hardirq.h and also remove the unused
idle_timestamp field in irq_cpustat whilst we're at it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'x86/ptrace-syscall-exit' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland

* 'x86/ptrace-syscall-exit' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland:
  x86: ptrace: sysret path should reach syscall_trace_leave

* git://git.infradead.org/battery-2.6:
  power_supply: Add driver for the PMU on WM831x PMICs
  ds2760_battery: Fix integer overflow for time_to_empty_now
  wm97xx_battery: Convert to dev_pm_ops
  wm97xx_battery: Use irq to detect charger state
  wm97xx_battery: Use platform_data
  wm97xx-core: Pass platform_data to battery
  ds2760_battery: implement set_charged() feature
  power_supply: get_by_name and set_charged functionality
  power_supply: EXPORT_SYMBOL cleanups
  ds2760_battery: add current_accum module parameter
  ds2760_battery: handle full_active_uAh == 0 case correctly
  ds2760_battery: add rated_capacity module parameter
  ds2760_battery: export more features
  ds2760_battery: delay power supply registration
  wm8350_power: Implement charge type property
  power_supply: Add a charge_type property, and use it for olpc driver
  olpc_battery: Add an 'error' sysfs device that displays raw errors
  Revert "power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL"

* 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/r600: set correct pitch for 4 byte copy
  drm/radeon: consolidate family flags used in pciids.

* git://git.infradead.org/mtd-2.6: (58 commits)
  mtd: jedec_probe: add PSD4256G6V id
  mtd: OneNand support for Nomadik 8815 SoC (on NHK8815 board)
  mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board)
  m25p80: Add Spansion S25FL129P serial flashes
  jffs2: Use SLAB_HWCACHE_ALIGN for jffs2_raw_{dirent,inode} slabs
  mtd: sh_flctl: register sh_flctl using platform_driver_probe()
  mtd: nand: txx9ndfmc: transfer 512 byte at a time if possible
  mtd: nand: fix tmio_nand ecc correction
  mtd: nand: add __nand_correct_data helper function
  mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128G
  mtd: inftl: fix fold chain block number
  mtd: jedec: fix compilation problem with I28F640C3B definition
  mtd: nand: fix ECC Correction bug for SMC ordering for NDFC driver
  mtd: ofpart: Check availability of reg property instead of name property
  driver/Makefile: Initialize "mtd" and "spi" before "net"
  mtd: omap: adding DMA mode support in nand prefetch/post-write
  mtd: omap: add support for nand prefetch-read and post-write
  mtd: add nand support for w90p910 (v2)
  mtd: maps: add mtd-ram support to physmap_of
  mtd: pxa3xx_nand: add single-bit error corrections reporting
  ...

* 'vgaarb-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  vgaarb: make client interface config invariant.

* git://git.infradead.org/iommu-2.6: (23 commits)
  intel-iommu: Disable PMRs after we enable translation, not before
  intel-iommu: Kill DMAR_BROKEN_GFX_WA option.
  intel-iommu: Fix integer wrap on 32 bit kernels
  intel-iommu: Fix integer overflow in dma_pte_{clear_range,free_pagetable}()
  intel-iommu: Limit DOMAIN_MAX_PFN to fit in an 'unsigned long'
  intel-iommu: Fix kernel hang if interrupt remapping disabled in BIOS
  intel-iommu: Disallow interrupt remapping if not all ioapics covered
  intel-iommu: include linux/dmi.h to use dmi_ routines
  pci/dmar: correct off-by-one error in dmar_fault()
  intel-iommu: Cope with yet another BIOS screwup causing crashes
  intel-iommu: iommu init error path bug fixes
  intel-iommu: Mark functions with __init
  USB: Work around BIOS bugs by quiescing USB controllers earlier
  ia64: IOMMU passthrough mode shouldn't trigger swiotlb init
  intel-iommu: make domain_add_dev_info() call domain_context_mapping()
  intel-iommu: Unify hardware and software passthrough support
  intel-iommu: Cope with broken HP DC7900 BIOS
  iommu=pt is a valid early param
  intel-iommu: double kfree()
  intel-iommu: Kill pointless intel_unmap_single() function
  ...

Fixed up trivial include lines conflict in drivers/pci/intel-iommu.c

Impact: cleanup

No need for redeclaration.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (41 commits)
  regulator: Add some brief design documentation
  regulator: fix voltage range in da9034 ldo12
  regulator/driver: be more specific in nanodoc for is_enabled
  regulator/lp3971: drop unnecessary initialization
  regulator: drop 'default n'
  regulator: fix typos
  regulator: fix calculation of voltage range in da9034_set_ldo12_voltage()
  regulator: update a filename in documentation
  drivers/regulator/Kconfig: fix typo (s/Usersapce/Userspace/) in REGULATOR_USERSPACE_CONSUMER description
  REGULATOR Handle positive returncode from enable
  regulator: tps650xx - build fixes for x86_64
  Fix some regulator documentation
  Regulator: Adding TPS65023 and TPS6507x in Kconfig and Makefile
  Regulator: Add TPS6507x regulator driver
  Regulator: Add TPS65023 regulator driver
  regulator: userspace: use sysfs_create_group
  regulator: Add GPIO enable control to fixed voltage regulator driver
  Regulator: Implement list_voltage for pcf50633 regulator driver.
  regulator: regulator_enable() permission checking
  regulator: Push locking for regulator_is_enabled() out
  ...

* 'fix/misc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: lx6464es - remove unused struct member
  ALSA: lx6464es - cleanup of rmh message bus function
  ALSA: pcm - Simplify snd_pcm_drain() implementation

* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: wm8753: fix mapping when MONOMIX is set to Stereo
  ASoC: some minor changes for AD1836 and AD1938 codec drivers
  ASoC: DaVinci: Fixes to McASP configuration
  ASoC: Blackfin I2S: fix resuming when device hasn't been used
  ASoC: Blackfin I2S: add lost platform_device parameter to resume function
  ASoC: fix typos in Blackfin headers
  ASoC: bf5xx-sport: the irq save/restore funcs take an unsigned long
  ASoC: Blackfin AC97: add a few missing multichannel define handling

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (22 commits)
  [S390] Update default configuration.
  [S390] hibernate: Do real CPU swap at resume time
  [S390] dasd: tolerate devices that have no feature codes
  [S390] zcrypt: Do not add/remove devices in s/r callbacks
  [S390] hibernate: make sure pfn_is_nosave handles lowcore pages
  [S390] smp: introduce LC_ORDER and simplify lowcore handling
  [S390] ptrace: use common code for simple peek/poke operations
  [S390] fix disabled_wait inline assembly clobber list
  [S390] Change kernel_page_present coding style.
  [S390] hibernation: reset system after resume
  [S390] hibernation: fix guest page hinting related crash
  [S390] Get rid of init_module/delete_module compat functions.
  [S390] Convert sys_execve to function with parameters.
  [S390] Convert sys_clone to function with parameters.
  [S390] qdio: change state of all primed input buffers
  [S390] qdio: reduce per device debug messages
  [S390] cio: introduce consistent subchannel scanning
  [S390] cio: idset use actual number of ssids
  [S390] cio: dont kfree vmalloced memory
  [S390] cio: introduce css_settle
  ...

* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  itimers: Add tracepoints for itimer
  hrtimer: Add tracepoint for hrtimers
  timers: Add tracepoints for timer_list timers
  cputime: Optimize jiffies_to_cputime(1)
  itimers: Simplify arm_timer() code a bit
  itimers: Fix periodic tics precision
  itimers: Merge ITIMER_VIRT and ITIMER_PROF

Trivial header file include conflicts in kernel/fork.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: sbp2: remove a workaround for Momobay FX-3A
  firewire: sbp2: remove a workaround for Momobay FX-3A
  firewire: sbp2: fix status reception
  firewire: core: fix topology map response handler
  firewire: core: fix race with parallel PCI device probe
  firewire: core: header file cleanup
  firewire: ohci: fix Self ID Count register mask (safeguard against buffer overflow)
  ieee1394: raw1394: Do not leak memory on failed trylock.

* 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6:
  SFI: remove unneeded includes
  sfi: Remove unused code
  SFI: Hook PCI MMCONFIG
  x86: add arch-specific SFI support
  SFI: add capability to parse ACPI tables
  SFI: add platform-independent core support
  SFI: create linux/sfi.h
  SFI: Simple Firmware Interface - MAINTAINERS, Kconfig

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (119 commits)
  ACPI: don't pass handle for fixed hardware notifications
  ACPI: remove null pointer checks in deferred execution path
  ACPI: simplify deferred execution path
  acerhdf: additional BIOS versions
  acerhdf: convert to dev_pm_ops
  acerhdf: fix fan control for AOA150 model
  thermal: add missing Kconfig dependency
  acpi: switch /proc/acpi/{debug_layer,debug_level} to seq_file
  hp-wmi: fix rfkill memory leak on unload
  ACPI: remove unnecessary #ifdef CONFIG_DMI
  ACPI: linux/acpi.h should not include linux/dmi.h
  hwmon driver for ACPI 4.0 power meters
  topstar-laptop: add new driver for hotkeys support on Topstar N01
  thinkpad_acpi: fix rfkill memory leak on unload
  thinkpad-acpi: report brightness events when required
  thinkpad-acpi: don't poll by default any of the reserved hotkeys
  thinkpad-acpi: Fix procfs hotkey reset command
  thinkpad-acpi: deprecate hotkey_bios_mask
  thinkpad-acpi: hotkey poll fixes
  thinkpad-acpi: be more strict when detecting a ThinkPad
  ...

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: Clearly mark ACPI drivers as such
  i2c: Add driver for SMBus Control Method Interface
  i2c-pnx: Correct use of request_region/request_mem_region
  MAINTAINERS: Add maintainer for AT24 and PCA9564/PCA9665
  i2c-piix4: Add AMD SB900 SMBus device ID
  i2c/chips: Remove deprecated pcf8574 driver
  i2c/chips: Remove deprecated pca9539 driver
  i2c/chips: Remove deprecated pcf8575 driver
  gpio/pcf857x: Copy i2c_device_id from old pcf8574 driver
  i2c/scx200_acb: Provide more information on bus errors
  i2c: Provide compatibility links for i2c adapters
  i2c: Convert i2c adapters to bus devices
  i2c: Convert i2c clients to a device type
  i2c/tsl2550: Use combined SMBus transactions
  i2c-taos-evm: Switch echo off to improve performance
  i2c: Drop unused i2c_driver.id field

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (85 commits)
  ocfs2: Use buffer IO if we are appending a file.
  ocfs2: add spinlock protection when dealing with lockres->purge.
  dlmglue.c: add missed mlog lines
  ocfs2: __ocfs2_abort() should not enable panic for local mounts
  ocfs2: Add ioctl for reflink.
  ocfs2: Enable refcount tree support.
  ocfs2: Implement ocfs2_reflink.
  ocfs2: Add preserve to reflink.
  ocfs2: Create reflinked file in orphan dir.
  ocfs2: Use proper parameter for some inode operation.
  ocfs2: Make transaction extend more efficient.
  ocfs2: Don't merge in 1st refcount ops of reflink.
  ocfs2: Modify removing xattr process for refcount.
  ocfs2: Add reflink support for xattr.
  ocfs2: Create an xattr indexed block if needed.
  ocfs2: Call refcount tree remove process properly.
  ocfs2: Attach xattr clusters to refcount tree.
  ocfs2: Abstract ocfs2 xattr tree extend rec iteration process.
  ocfs2: Abstract the creation of xattr block.
  ocfs2: Remove inode from ocfs2_xattr_bucket_get_name_value.
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (142 commits)
  USB: Fix sysfs paths in documentation
  USB: skeleton: fix coding style issues.
  USB: O_NONBLOCK in read path of skeleton
  USB: make usb-skeleton honor O_NONBLOCK in write path
  USB: skel_read really sucks royally
  USB: Add hub descriptor update hook for xHCI
  USB: xhci: Support USB hubs.
  USB: xhci: Set multi-TT field for LS/FS devices under hubs.
  USB: xhci: Set route string for all devices.
  USB: xhci: Fix command wait list handling.
  USB: xhci: Change how xHCI commands are handled.
  USB: xhci: Refactor input device context setup.
  USB: xhci: Endpoint representation refactoring.
  USB: gadget: ether needs to select CRC32
  USB: fix USBTMC get_capabilities success handling
  USB: fix missing error check in probing
  USB: usbfs: add USBDEVFS_URB_BULK_CONTINUATION flag
  USB: support for autosuspend in sierra while online
  USB: ehci-dbgp,ehci: Allow dbpg to work with suspend/resume
  USB: ehci-dbgp,documentation: Documentation updates for ehci-dbgp
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: don't force VIRTIO_F_NOTIFY_ON_EMPTY
  lguest: cleanup for map_switcher()
  lguest: use PGDIR_SHIFT for PAE code to allow different PAGE_OFFSET
  lguest: use set_pte/set_pmd uniformly for real page table entries
  lguest: move panic notifier registration to its expected place.
  virtio_blk: add support for cache flush
  virtio: add virtio IDs file
  virtio: get rid of redundant VIRTIO_ID_9P definition
  virtio: make add_buf return capacity remaining
  virtio_pci: minor MSI-X cleanups

My 58fa879e "mm: FOLL flags for GUP flags"
broke CONFIG_NOMMU build by forgetting to update nommu.c foll_flags type:

  mm/nommu.c:171: error: conflicting types for `__get_user_pages'
  mm/internal.h:254: error: previous declaration of `__get_user_pages' was here
  make[1]: *** [mm/nommu.o] Error 1

My 03f6462a "mm: move highest_memmap_pfn"
broke CONFIG_NOMMU build by forgetting to add a nommu.c highest_memmap_pfn:

  mm/built-in.o: In function `memmap_init_zone':
  (.meminit.text+0x326): undefined reference to `highest_memmap_pfn'
  mm/built-in.o: In function `memmap_init_zone':
  (.meminit.text+0x32d): undefined reference to `highest_memmap_pfn'

Fix both breakages, and give myself 30 lashes (ouch!)
Reported-by: NMichal Simek <michal.simek@petalogix.com>
Signed-off-by: NHugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For this system call user space passes a signed long length parameter,
while the kernel side takes an unsigned long parameter and converts it
later to signed long again.

This has led to bugs in compat wrappers see e.g.  dd90bbd5 "powerpc: Add
compat_sys_truncate".  The s390 compat wrapper for this functions is
broken as well since it also performs zero extension instead of sign
extension for the length parameter.

In addition if hpa comes up with an automated way of generating
compat wrappers it would generate a wrong one here.

So change the length parameter from unsigned long to long.

Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://gitserver.sunplusct.com/linux-2.6-score:
  score: update email address in MAINTAINERS.
  score: Cleanup linker script using new macros.
  score: Make THREAD_SIZE available to assembly files.
  score: Make PAGE_SIZE available to assembly.