- 12 8月, 2017 3 次提交
-
-
由 Jiri Pirko 提交于
cops->tcf_cl_offload is no longer needed, as the drivers check what they can and cannot offload using the classid identify helpers. So remove this. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
There is no longer need to use handle in drivers, so remove it from tc_cls_common_offload struct. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Drivers need classid to decide they support this specific qdisc+class or not. So propagate it down via the tc_cls_common_offload struct. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 8月, 2017 4 次提交
-
-
由 WANG Cong 提交于
Now we use 'unsigned long fh' as a pointer in every place, it is safe to convert it to a void pointer now. This gets rid of many casts to pointer. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
prio is not cls_flower specific, but it is meaningful for all classifiers. Seems that only mlxsw cares about the value. Obviously, cls offload in other drivers is broken. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
As ndo_setup_tc is generic offload op for whole tc subsystem, does not really make sense to have cls-specific args. So move them under cls_common structurure which is embedded in all cls structs. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Since this is specific to flower now, make it part of the flower offload struct. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 8月, 2017 7 次提交
-
-
由 Jiri Pirko 提交于
tcf_exts_change is always called on newly created exts, which are not used on fastpath. Therefore, simple struct copy is enough. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Leave it to tcf_action_exec to return TC_ACT_OK in case there is no action present. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Return the defined TC_ACT_OK instead of 0. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
These two helpers are doing the same as tcf_exts_has_actions, so remove them and use tcf_exts_has_actions instead. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Use the tcf_exts_has_actions helper instead or directly testing exts->nr_actions in tcf_exts_exec. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
The rest of the helpers are named tcf_exts_*, so change the name of the action number helpers to be aligned. While at it, change to inline functions. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Since tcf_em_tree_validate could be always called on a newly created filter, there is no need for this change function. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 6月, 2017 1 次提交
-
-
由 Jakub Kicinski 提交于
Forgetting to disable preemption around tcf_action_stats_update() seems to be a common mistake. Add a helper function for updating stats on all actions of a filter. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 5月, 2017 1 次提交
-
-
由 WANG Cong 提交于
tcf_chain_get() always creates a new filter chain if not found in existing ones. This is totally unnecessary when we get or delete filters, new chain should be only created for new filters (or new actions). Fixes: 5bc17018 ("net: sched: introduce multichain support for filters") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 5月, 2017 3 次提交
-
-
由 Jiri Pirko 提交于
Instead of having only one filter per block, introduce a list of chains for every block. Create chain 0 by default. UAPI is extended so the user can specify which chain he wants to change. If the new attribute is not specified, chain 0 is used. That allows to maintain backward compatibility. If chain does not exist and user wants to manipulate with it, new chain is created with specified index. Also, when last filter is removed from the chain, the chain is destroyed. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Currently, the filter chains are direcly put into the private structures of qdiscs. In order to be able to have multiple chains per qdisc and to allow filter chains sharing among qdiscs, there is a need for common object that would hold the chains. This introduces such object and calls it "tcf_block". Helpers to get and put the blocks are provided to be called from individual qdisc code. Also, the original filter_list pointers are left in qdisc privs to allow the entry into tcf_block processing without any added overhead of possible multiple pointer dereference on fast path. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Move tc_classify function to cls_api.c where it belongs, rename it to fit the namespace. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 2月, 2017 1 次提交
-
-
由 Or Gerlitz 提交于
Currently there is no way of querying whether a filter is offloaded to HW or not when using "both" policy (where none of skip_sw or skip_hw flags are set by user-space). Add two new flags, "in hw" and "not in hw" such that user space can determine if a filter is actually offloaded to hw or not. The "in hw" UAPI semantics was chosen so it's similar to the "skip hw" flag logic. If none of these two flags are set, this signals running over older kernel. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NAmir Vadai <amir@vadai.me> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 2月, 2017 1 次提交
-
-
由 Jiri Pirko 提交于
This fixes broken build for !NET_CLS: net/built-in.o: In function `fq_codel_destroy': /home/sab/linux/net-next/net/sched/sch_fq_codel.c:468: undefined reference to `tcf_destroy_chain' Fixes: cf1facda ("sched: move tcf_proto_destroy and tcf_destroy_chain helpers into cls_api") Reported-by: NSabrina Dubroca <sd@queasysnail.net> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Tested-by: NSabrina Dubroca <sd@queasysnail.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 2月, 2017 1 次提交
-
-
由 Jiri Pirko 提交于
Creation is done in this file, move destruction to be at the same place. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 2月, 2017 1 次提交
-
-
由 Jiri Pirko 提交于
The driver that offloads flower rules needs to know with which priority user inserted the rules. So add this information into offload struct. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 1月, 2017 1 次提交
-
-
由 Jamal Hadi Salim 提交于
Introduce optional 128-bit action cookie. Like all other cookie schemes in the networking world (eg in protocols like http or existing kernel fib protocol field, etc) the idea is to save user state that when retrieved serves as a correlator. The kernel _should not_ intepret it. The user can store whatever they wish in the 128 bits. Sample exercise(showing variable length use of cookie) .. create an accept action with cookie a1b2c3d4 sudo $TC actions add action ok index 1 cookie a1b2c3d4 .. dump all gact actions.. sudo $TC -s actions ls action gact action order 0: gact action pass random type none pass val 0 index 1 ref 1 bind 0 installed 5 sec used 5 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 cookie a1b2c3d4 .. bind the accept action to a filter.. sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \ u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 1 ... send some traffic.. $ ping 127.0.0.1 -c 3 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.020 ms 64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.027 ms 64 bytes from 127.0.0.1: icmp_seq=3 ttl=64 time=0.038 ms Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2016 2 次提交
-
-
由 Hadar Hen Zion 提交于
In order to support hardware offloading when the device given by the tc rule is different from the Hardware underline device, extract the mirred (egress) device from the tc action when a filter is added, using the new tc_action_ops, get_dev(). Flower caches the information about the mirred device and use it for calling ndo_setup_tc in filter change, update stats and delete. Calling ndo_setup_tc of the mirred (egress) device instead of the ingress device will allow a resolution between the software ingress device and the underline hardware device. The resolution will take place inside the offloading driver using 'egress_device' flag added to tc_to_netdev struct which is provided to the offloading driver. Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hadar Hen Zion 提交于
Creating a difference between two possible cases: 1. Not offloading tc rule since the user sets 'skip_hw' flag. 2. Not offloading tc rule since the device doesn't support offloading. This patch doesn't add any new functionality. Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com> Reviewed-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 9月, 2016 1 次提交
-
-
由 Hadar Hen Zion 提交于
Currently the created tc actions list is reversed against the order set by the user. Change the actions list order to be the same as was set by the user. This patch doesn't affect dump actions behavior. For dumping, action->order parameter is used so the list order doesn't matter. Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 9月, 2016 3 次提交
-
-
由 Jakub Kicinski 提交于
Call into offloaded filters to update stats. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_HW flag. Unlike U32 and flower cls_bpf already has some netlink flags defined. Create a new attribute to be able to use the same flag values as the above. Unlike U32 and flower reject unknown flags. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
This patch adds hardware offload capability to cls_bpf classifier, similar to what have been done with U32 and flower. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 8月, 2016 1 次提交
-
-
由 WANG Cong 提交于
After commit 22dc13c8 ("net_sched: convert tcf_exts from list to pointer array") we do dynamic allocation in tcf_exts_init(), therefore we need to handle the ENOMEM case properly. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 8月, 2016 2 次提交
-
-
由 WANG Cong 提交于
As pointed out by Jamal, an action could be shared by multiple filters, so we can't use list to chain them any more after we get rid of the original tc_action. Instead, we could just save pointers to these actions in tcf_exts, since they are refcount'ed, so convert the list to an array of pointers. The "ugly" part is the action API still accepts list as a parameter, I just introduce a helper function to convert the array of pointers to a list, instead of relying on the C99 feature to iterate the array. Fixes: a85a970a ("net_sched: move tc_action into tcf_common") Reported-by: NJamal Hadi Salim <jhs@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
struct tcf_exts belongs to filters, should not be visible to plain tc actions. Cc: Ido Schimmel <idosch@mellanox.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 7月, 2016 1 次提交
-
-
由 Yotam Gigi 提交于
Following the work that have been done on offloading classifiers like u32 and flower, now the match-all classifier hw offloading is possible. if the interface supports tc offloading. To control the offloading, two tc flags have been introduced: skip_sw and skip_hw. Typical usage: tc filter add dev eth25 parent ffff: \ matchall skip_sw \ action mirred egress mirror \ dev eth27 Signed-off-by: NYotam Gigi <yotamg@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 6月, 2016 1 次提交
-
-
由 Daniel Borkmann 提交于
When offloading classifiers such as u32 or flower to hardware, and the qdisc is clsact (TC_H_CLSACT), then we need to differentiate its classes, since not all of them handle ingress, therefore we must leave those in software path. Add a .tcf_cl_offload() callback, so we can generically handle them, tested on ixgbe. Fixes: 10cbc684 ("net/sched: cls_flower: Hardware offloaded filters statistics support") Fixes: 5b33f488 ("net/flower: Introduce hardware offload support") Fixes: a1b7c5fd ("net: sched: add cls_u32 offload hooks for netdevs") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 5月, 2016 3 次提交
-
-
由 Amir Vadai 提交于
Introduce a new command in ndo_setup_tc() for hardware offloaded filters, to call the NIC driver, and make it update the statistics. This will be done before dumping the filter and its statistics. Signed-off-by: NAmir Vadai <amirva@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Samudrala, Sridhar 提交于
On devices that support TC U32 offloads, this flag enables a filter to be added only to HW. skip-sw and skip-hw are mutually exclusive flags. By default without any flags, the filter is added to both HW and SW, but no error checks are done in case of failure to add to HW. With skip-sw, failure to add to HW is treated as an error. Here is a sample script that adds 2 filters, one with skip-sw and the other with skip-hw flag. # add ingress qdisc tc qdisc add dev p4p1 ingress # enable hw tc offload. ethtool -K p4p1 hw-tc-offload on # add u32 filter with skip-sw flag. tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:1 u32 ht 800: flowid 800:1 \ skip-sw \ match ip src 192.168.1.0/24 \ action drop # add u32 filter with skip-hw flag. tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:2 u32 ht 800: flowid 800:2 \ skip-hw \ match ip src 192.168.2.0/24 \ action drop Signed-off-by: NSridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Samudrala, Sridhar 提交于
Signed-off-by: NSridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 3月, 2016 1 次提交
-
-
由 Amir Vadai 提交于
Cast pointer to unsigned long instead of u64, to fix compilation warning on 32 bit arch, spotted by 0day build. Fixes: 5b33f488 ("net/flower: Introduce hardware offload support") Signed-off-by: NAmir Vadai <amir@vadai.me> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 3月, 2016 1 次提交
-
-
由 Amir Vadai 提交于
This patch is based on a patch made by John Fastabend. It adds support for offloading cls_flower. when NETIF_F_HW_TC is on: flags = 0 => Rule will be processed twice - by hardware, and if still relevant, by software. flags = SKIP_HW => Rull will be processed by software only If hardware fail/not capabale to apply the rule, operation will NOT fail. Filter will be processed by SW only. Acked-by: NJiri Pirko <jiri@mellanox.com> Suggested-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NAmir Vadai <amir@vadai.me> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-