- 08 7月, 2008 14 次提交
-
-
由 Huang, Ying 提交于
Because of the size limits of struct boot_params (zero page), the maximum number of E820 memory map entries can be passed to kernel is 128. As pointed by Paul Jackson, there is some machine produced by SGI with so many nodes that the number of E820 memory map entries is more than 128. To enabling Linux kernel on these system, a new setup data type named SETUP_E820_EXT is defined to pass additional memory map entries to Linux kernel. This patch is based on x86/auto-latest branch of git-x86 tree and has been tested on x86_64 and i386 platform. Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
use early_node_map to init high pages, so we can remove page_is_ram() and page_is_reserved_early() in the big loop with add_one_highpage also remove page_is_reserved_early(), it is not needed anymore. v2: fix the build of other platforms Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
rename update_memory_range to e820_update_range rename add_memory_region to e820_add_region to make it more clear that they are about e820 map operations. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
so we don't get the same value multiple times. also make mp_config_acpi_legacy_irqs more readable by moving assignments together. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Daniel Exner reported IO-APIC enumeration breakage in linux-next. Alexey Starikovskiy found out that it might be related to commit 2944e16b "x86: update mptable". use enable_update_mptable to decide if need check before add mp_irqs array. Reported-by: NDaniel Exner <webmaster@dragonslave.de> Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
1. move that before zone_sizes_init ... 2. add free_early for one old one, otherwise it will be be reserved again when we init highmem. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
in case we have kva before ramdisk on a node, we still need to use those ranges. v2: reserve_early kva ram area, in case there are holes in highmem, to avoid those area could be treat as free high pages. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
1. add reserve_bootmem_generic for 32bit 2. change len to unsigned long 3. make early_res_to_bootmem to use it Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
we are checking mptable early for numaq, so don't need to reserve_bootmem for it. bootmem is not there yet. do the same thing as 64-bit. found it on 64g above system from 64-bit kernel kexec to 32 bit kernel with numaq support. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
fix typo in bigsmp switching. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
since we now have 32-bit support for e820_register_active_regions(), we can merge the parsing of the mem=/memmap= boot parameters. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Bernhard Walle 提交于
This patch uses reserve_bootmem_generic() instead of reserve_bootmem() to reserve the crashkernel memory on x86_64. That's necessary for NUMA machines, see 00212fef: [PATCH] Fix kdump Crash Kernel boot memory reservation for NUMA machines This patch will fix a boot memory reservation bug that trashes memory on the ES7000 when loading the kdump crash kernel. The code in arch/x86_64/kernel/setup.c to reserve boot memory for the crash kernel uses the non-numa aware "reserve_bootmem" function instead of the NUMA aware "reserve_bootmem_generic". I checked to make sure that no other function was using "reserve_bootmem" and found none, except the ones that had NUMA ifdef'ed out. I have tested this patch only on an ES7000 with NUMA on and off (numa=off) in a single (non-NUMA) and multi-cell (NUMA) configurations. Signed-off-by: NAmul Shah <amul.shah@unisys.com> Looks-good-to: Vivek Goyal <vgoyal@in.ibm.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org> The switch-back to reserve_bootmem() was accidentally introduced in 5c3391f9 when adding the BOOTMEM_EXCLUSIVE parameter. Signed-off-by: NBernhard Walle <bwalle@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Bernhard Walle 提交于
This patch adds a 'flags' parameter to reserve_bootmem_generic() like it already has been added in reserve_bootmem() with commit 72a7fe39. It also changes all users to use BOOTMEM_DEFAULT, which doesn't effectively change the behaviour. Since the change is x86-specific, I don't think it's necessary to add a new API for migration. There are only 4 users of that function. The change is necessary for the next patch, using reserve_bootmem_generic() for crashkernel reservation. Signed-off-by: NBernhard Walle <bwalle@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 05 7月, 2008 5 次提交
-
-
由 Rafael J. Wysocki 提交于
Since the trampoline code is now used for ACPI resume from suspend to RAM, the trampoline page tables have to be fixed up during boot not only on SMP systems, but also on UP systems that use the trampoline. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=10923Reported-by: NDionisus Torimens <djtm@gmx.net> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: pm list <linux-pm@lists.linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 H. Peter Anvin 提交于
Some Dell laptops enter resume with apparent garbage in the segment descriptor registers (almost certainly the result of a botched transition from protected to real mode.) The only way to clean that up is to enter protected mode ourselves and clean out the descriptor registers. This fixes resume on Dell XPS M1210 and Dell D620. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=10927Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: pm list <linux-pm@lists.linux-foundation.org> Cc: Len Brown <lenb@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Tested-by: NKirill A. Shutemov <kirill@shutemov.name> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Bastian Blank 提交于
The build of the Alpha Linux kernel currently fails[1] with inconsistent kallsyms data. As I never saw that before, I thought about hardware problems. But in fact it is a bug in the Linux kernel. The end of the rodata section is marked with the "__end_rodata" symbol. This symbol have different aligning constraints than the inittext parts and therefor the start marked "_sinittext". Because of that the __end_rodata symbol shifts between < _sinittext and == _sinittext. The later variant is seen as a code symbol and recorded in the kallsyms data. On fix would be to move the exception table a little bit and get some space between that two areas. [1]: http://buildd.debian.org/fetch.cgi?pkg=linux-2.6&arch=alpha&ver=2.6.25-5&stamp=1213919009&file=log&as=raw Cc: maximilian attems <max@stro.at> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Provide __ucmpdi2() for MN10300 so that allmodconfig can be built. Signed-off-by: NDavid Howells <dhowells@redhat.com> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Export kernel_thread() and empty_zero_page so that allmodconfig can be built for MN10300. Signed-off-by: NDavid Howells <dhowells@redhat.com> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 7月, 2008 4 次提交
-
-
由 Jeremy Fitzhardinge 提交于
When converting the page number in a pte/pmd/pud/pgd between machine and pseudo-physical addresses, the converted result was being truncated at 32-bits. This caused failures on machines with more than 4G of physical memory. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: "Christopher S. Aker" <caker@theshore.net> Cc: Ian Campbell <Ian.Campbell@eu.citrix.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Atsushi Nemoto 提交于
The txx9_tmr_init() will not clear a timer counter register in a certain case. The counter register is cleared on 1->0 transition of TCE bit if CRE=1. So just clearing the TCE bit is not enough. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
The introduction of a real dma cache invalidate makes it important to have a correct cache line size, otherwise the kernel will gives out two memory segment, which might share one cache line. The R4400 Indy/Indigo2 CPU modules are using a second level cache line size of 128 bytes, so MIPS_L1_CACHE_SHIFT needs to be bumped up to 7 for IP22. Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
It's possible that the crime interrupt handler is called without pending interrupts (probably a hardware issue). To avoid irritating "unexpected irq 71" messages, we now just ignore the spurious crime interrupts. Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 03 7月, 2008 2 次提交
-
-
由 Andrew Morton 提交于
fix this warning: arch/x86/mm/init_64.c: In function 'early_memtest': arch/x86/mm/init_64.c:524: warning: passing argument 2 of 'find_e820_area_size' from incompatible pointer type Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Hugh Dickins 提交于
Fedora reports that mem_init()'s zap_low_mappings(), extended to SMP in 61165d7a x86: fix app crashes after SMP resume causes 32-bit Intel Mac machines to reboot very early when booting with EFI. The EFI code appears to manage low mappings for itself when needed; but like many before it, confuses PSE with PAE. So it has only been mapping half the space it needed when PSE but not PAE. This remained unnoticed until we moved the SMP zap_low_mappings() before efi_enter_virtual_mode(). Presumably could have been noticed years ago if anyone ran a UP kernel on such machines? Reported-by: NPeter Jones <pjones@redhat.com> Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: Peter Jones <pjones@redhat.com> Cc: Glauber Costa <gcosta@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Tested-by: NPeter Jones <pjones@redhat.com>
-
- 02 7月, 2008 3 次提交
-
-
由 Tim Yamin 提交于
Suspend/resume ("echo mem > /sys/power/state") does not work with vanilla kernels -- the system does not suspend correctly and just hangs. This patch fixes this so suspend/resume works: 1) of_iomap does not map the whole 0xC000 of the MPC5200 immr so saving registers does not work. 2) PCI registers need to be saved and restored. Signed-off-by: NTim Yamin <plasm@roo.me.uk> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 John Linn 提交于
The legacy serial driver does not work with an 8250 type UART that is described in the device tree with the reg-offset and reg-shift properties. This change makes legacy_serial ignore these devices. Signed-off-by: NJohn Linn <john.linn@xilinx.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 John Linn 提交于
This change to the makefile corrects the build of a simpleImage with initrd. Signed-off-by: NJohn Linn <john.linn@xilinx> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 01 7月, 2008 4 次提交
-
-
由 Thomas Gleixner 提交于
commit 43238382 x86: change size of node ids from u8 to s16 set the range for NODES_SHIFT to 1..15. The possible range is 1..9 Fixes Bugzilla #10726 Reported-by: NDave Jones <davej@codemonkey.org.uk> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Doug Chapman 提交于
The symbol account_system_vtime is used by the kvm module but not exported. This breaks building with CONFIG_VIRT_CPU_ACCOUNTING and CONFIG_KVM=m. Signed-off-by: NDoug Chapman <doug.chapman@hp.com> Acked-by: NHidetosho Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Tony Luck 提交于
On a system where there are no hot pluggable cpus "additional_cpus" is still set to -1 at the point where we call per_cpu_scan_finalize(). If we didn't find an SRAT table and so pick the default "32" for the number of cpus, when we get to: high_cpu = min(high_cpu + reserve_cpus, NR_CPUS); we will end up initializing for just 31 cpus ... and so we will die horribly when bringing up cpu#32. Problem introduced by: 2c6e6db4 "Minimize per_cpu reservations." Acked-by: NRobin Holt <holt@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Catalin Marinas 提交于
This patch annotates the platform_secondary_init function in arch/arm/mach-realview/platsmp.c with trace_hardirqs_off to avoid a warning when LOCKDEP and TRACE_IRQFLAGS are enabled. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 30 6月, 2008 2 次提交
-
-
由 TAKADA Yoshihito 提交于
When I update kernel 2.6.25 from 2.6.24, gdb does not work. On 2.6.25, ptrace(PTRACE_GETFPXREGS, ...) returns ENODEV. But 2.6.24 kernel's ptrace() returns EIO. It is issue of compatibility. I attached test program as pt.c and patch for fix it. #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <signal.h> #include <errno.h> #include <sys/ptrace.h> #include <sys/types.h> struct user_fxsr_struct { unsigned short cwd; unsigned short swd; unsigned short twd; unsigned short fop; long fip; long fcs; long foo; long fos; long mxcsr; long reserved; long st_space[32]; /* 8*16 bytes for each FP-reg = 128 bytes */ long xmm_space[32]; /* 8*16 bytes for each XMM-reg = 128 bytes */ long padding[56]; }; int main(void) { pid_t pid; pid = fork(); switch(pid){ case -1:/* error */ break; case 0:/* child */ child(); break; default: parent(pid); break; } return 0; } int child(void) { ptrace(PTRACE_TRACEME); kill(getpid(), SIGSTOP); sleep(10); return 0; } int parent(pid_t pid) { int ret; struct user_fxsr_struct fpxregs; ret = ptrace(PTRACE_GETFPXREGS, pid, 0, &fpxregs); if(ret < 0){ printf("%d: %s.\n", errno, strerror(errno)); } kill(pid, SIGCONT); wait(pid); return 0; } /* in the kerel, at kernel/i387.c get_fpxregs() */ Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Zhang, Yanmin 提交于
Vegard Nossum reported crashes during cpu hotplug tests: http://marc.info/?l=linux-kernel&m=121413950227884&w=4 In function _cpu_up, the panic happens when calling __raw_notifier_call_chain at the second time. Kernel doesn't panic when calling it at the first time. If just say because of nr_cpu_ids, that's not right. By checking the source code, I found that function do_boot_cpu is the culprit. Consider below call chain: _cpu_up=>__cpu_up=>smp_ops.cpu_up=>native_cpu_up=>do_boot_cpu. So do_boot_cpu is called in the end. In do_boot_cpu, if boot_error==true, cpu_clear(cpu, cpu_possible_map) is executed. So later on, when _cpu_up calls __raw_notifier_call_chain at the second time to report CPU_UP_CANCELED, because this cpu is already cleared from cpu_possible_map, get_cpu_sysdev returns NULL. Many resources are related to cpu_possible_map, so it's better not to change it. Below patch against 2.6.26-rc7 fixes it by removing the bit clearing in cpu_possible_map. Signed-off-by: NZhang Yanmin <yanmin_zhang@linux.intel.com> Tested-by: NVegard Nossum <vegard.nossum@gmail.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 26 6月, 2008 1 次提交
-
-
由 Daniel J Blueman 提交于
WARNING: arch/x86/mm/built-in.o(.text+0x3a1): Section mismatch in reference from the function set_pte_phys() to the function .init.text:spp_getpage() The function set_pte_phys() references the function __init spp_getpage(). This is often because set_pte_phys lacks a __init annotation or the annotation of spp_getpage is wrong. arch/x86/mm/init_64.c: In function 'early_memtest': arch/x86/mm/init_64.c:520: warning: passing argument 2 of 'find_e820_area_size' from incompatible pointer type Signed-off-by: NDaniel J Blueman <daniel.blueman@gmail.com> Cc: "Linus Torvalds" <torvalds@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 25 6月, 2008 5 次提交
-
-
由 Bryan Wu 提交于
-- WARNING: vmlinux.o(.text+0x721a): Section mismatch in reference from the function ___fill_code_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_code_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_code_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. WARNING: vmlinux.o(.text+0x7238): Section mismatch in reference from the function ___fill_code_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_code_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_code_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. WARNING: vmlinux.o(.text+0x7250): Section mismatch in reference from the function ___fill_code_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_code_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_code_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. WARNING: vmlinux.o(.text+0x7264): Section mismatch in reference from the function ___fill_code_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_code_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_code_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. WARNING: vmlinux.o(.text+0x72a2): Section mismatch in reference from the function ___fill_data_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_data_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_data_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. WARNING: vmlinux.o(.text+0x72bc): Section mismatch in reference from the function ___fill_data_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_data_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_data_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. WARNING: vmlinux.o(.text+0x72d4): Section mismatch in reference from the function ___fill_data_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_data_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_data_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. WARNING: vmlinux.o(.text+0x72e8): Section mismatch in reference from the function ___fill_data_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_data_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_data_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. -- Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Sonic Zhang 提交于
Initialize the lock of bad_irq_desc properly. The content of irq_desc array is replaced by bad_irq_desc in blackfin arch irqchip init code. So, do it properly as common irq init code. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Gerd Hoffmann 提交于
This patch updates the kvm host code to use the pvclock structs and functions, thereby making it compatible with Xen. The patch also fixes an initialization bug: on SMP systems the per-cpu has two different locations early at boot and after CPU bringup. kvmclock must take that in account when registering the physical address within the host. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Gerd Hoffmann 提交于
This patch updates the kvm host code to use the pvclock structs. It also makes the paravirt clock compatible with Xen. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Gerd Hoffmann 提交于
This patch updates the xen guest to use the pvclock structs and helper functions. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Acked-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-