Make the existing bmap btree tracing generic so that it applies to all
btree types.

Some fragments lifted from a patch by Dave Chinner.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32187a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NBill O'Donnell <billodo@sgi.com>
Signed-off-by: NDavid Chinner <david@fromorbit.com>

xfs_btree_init_cursor contains close to little shared code for the
different btrees and will get even more non-common code in the future.
Split it up into one routine per btree type.

Because xfs_btree_dup_cursor needs to call the init routine for a generic
btree cursor add a new btree operation vector that contains a dup_cursor
method that initializes a new cursor based on an existing one.

The btree operations vector is based on an idea and code from Dave Chinner
and will grow more entries later during this series.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32176a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NBill O'Donnell <billodo@sgi.com>
Signed-off-by: NDavid Chinner <david@fromorbit.com>

Remove macro-to-small-function indirection from xfs_sb.h, and remove some
which are completely unused.

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30528a
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Signed-off-by: NDonald Douwsma <donaldd@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29321a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

The BMBT_*BITLEN are currently defined in a complicated way depending on
XFS_NATIVE_HOST. But if all the macros are expanded they (obviously)
expand to the same value for both cases.

This patch defines the macros in the most simple way and updates the
comment describing them to remove outdated bits.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29320a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

currently xfs_bmbt_rec_t is used both for ondisk extents as well as
host-endian ones. This patch adds a new xfs_bmbt_rec_host_t for the native
endian ones and cleans up the fallout. There have been various endianess
issues in the tracing / debug printf code that are fixed by this patch.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29318a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

Patch provided by Eric Sandeen (sandeen@sandeen.net).

SGI-PV: 960897
SGI-Modid: xfs-linux-melb:xfs-kern:28038a
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

It makes it incrementally clearer to read the code when the top of a macro
spaghetti-pile only receives the 3 arguments it uses, rather than 2 extra
ones which are not used. Also when you start pulling this thread out of
the sweater (i.e. remove unused args from XFS_BTREE_*_ADDR), a couple
other third arms etc fall off too. If they're not used in the macro, then
they sometimes don't need to be passed to the function calling the macro
either, etc....

Patch provided by Eric Sandeen (sandeen@sandeen.net).

SGI-PV: 960197
SGI-Modid: xfs-linux-melb:xfs-kern:28037a
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

incore users.

SGI-PV: 954580
SGI-Modid: xfs-linux-melb:xfs-kern:26561a
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNathan Scott <nathans@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

SGI-PV: 954580
SGI-Modid: xfs-linux-melb:xfs-kern:26559a
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNathan Scott <nathans@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

functionality, building upon the new layout introduced in mod
xfs-linux:xfs-kern:207390a.  The new multi-level extent allocations are
only required for heavily fragmented files, so the old-style linear extent
list is used on files until the extents reach a pre-determined size of 4k.
4k buffers are used because this is the system page size on Linux i386 and
systems with larger page sizes don't seem to gain much, if anything, by
using their native page size as the extent buffer size. Also, using 4k
extent buffers everywhere provides a consistent interface for CXFS across
different platforms.  The 4k extent buffers are managed by an indirection
array (xfs_ext_irec_t) which is basically just a pointer array with a bit
of extra information to keep track of the number of extents in each buffer
as well as the extent offset of each buffer.  Major changes include:  -
Add multi-level in-core file extent functionality to the xfs_iext_  
subroutines introduced in mod:	xfs-linux:xfs-kern:207390a  - Introduce 13
new subroutines which add functionality for multi-level   in-core file
extents:	 xfs_iext_add_indirect_multi()	      
xfs_iext_remove_indirect()	   xfs_iext_realloc_indirect()	      
xfs_iext_indirect_to_direct()	      xfs_iext_bno_to_irec()	    
xfs_iext_idx_to_irec()	       xfs_iext_irec_init()	   
xfs_iext_irec_new()	    xfs_iext_irec_remove()	  
xfs_iext_irec_compact() 	xfs_iext_irec_compact_pages()	     
xfs_iext_irec_compact_full()	     xfs_iext_irec_update_extoffs()

SGI-PV: 928864
SGI-Modid: xfs-linux-melb:xfs-kern:207393a
Signed-off-by: NMandy Kirkconnell <alkirkco@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 943272
SGI-Modid: xfs-linux:xfs-kern:201006a
Signed-off-by: NChristoph Hellwig <hch@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

boilerplate.

SGI-PV: 913862
SGI-Modid: xfs-linux:xfs-kern:23903a
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 943122
SGI-Modid: xfs-linux:xfs-kern:23901a
Signed-off-by: NNathan Scott <nathans@sgi.com>

Christoph).

SGI-PV: 942400
SGI-Modid: xfs-linux-melb:xfs-kern:23771a
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 936255
SGI-Modid: xfs-linux:xfs-kern:192759a
Signed-off-by: NChristoph Hellwig <hch@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!