fs/devpts/inode.c:324: warning: 'compare_init_pts_sb' defined but not used
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

USB serial has always had races where the tty port usage count can hit zero
during a receive event. The internal locking is a mutex so we can't use
that in the IRQ handlers.

With krefs we can tackle this differently but we still need to be careful.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch causes "bell" (^G) characters (invoked when the input buffer
is full) to be immediately output rather than filling the echo buffer.

This is especially a problem when the tty is stopped and buffers fill, since
the bells do not serve their purpose of immediate notification that the
buffer cannot take further input, and they will flush all at once when the
tty is restarted.
Signed-off-by: NJoe Peterson <joe@skyrush.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the handling of input characters when the tty buffer is full or nearly
full.  This includes tests that are done in n_tty_receive_char() and handling
of PARMRK.

Problems with the buffer-full tests done in receive_char() caused characters to
be lost at times when the buffer(s) filled.  Also, these full conditions
would often only be detected with echo on, and PARMRK was not accounted for
properly in all cases.  One symptom of these problems, in addition to lost
characters, was early termination from unix commands like tr and cat when
^Q was used to break from a stopped tty with full buffers (note that breaking
out was often previously not possible, due to the pty getting in "gridlock",
which will be addressed in another patch).  Note space is always reserved
at the end of the buffer for a newline (or EOF/EOL) in canonical mode.
Signed-off-by: NJoe Peterson <joe@skyrush.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix process_output_block to detect continuation characters correctly
and to handle control characters even when O_OLCUC is enabled.  Make
similar change to do_output_char().
Signed-off-by: NJoe Peterson <joe@skyrush.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have special case logic for resizing pty/tty pairs. We also have a per
driver resize method so for the pty case we should use it.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixed sparse warning:
drivers/char/tty_io.c:1216:19: warning: symbol 'tty_driver_lookup_tty' was not declared. Should it be static?
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Andrew Morton wrote:

in drivers/usb/serial/sierra.c:

        } else {
                if (urb->actual_length) {
+               tty = tty_port_tty_get(&port->port);
                        tty_buffer_request_room(tty, urb->actual_length);

it's missing a tab.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Just nail the oddments now while this code is being touched
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Changelog [v2]:
	- Add note indicating strict isolation is not possible unless all
	  mounts of devpts use the 'newinstance' mount option.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To support containers, allow multiple instances of devpts filesystem, such
that indices of ptys allocated in one instance are independent of ptys
allocated in other instances of devpts.

But to preserve backward compatibility, enable this support for multiple
instances only if:

	- CONFIG_DEVPTS_MULTIPLE_INSTANCES is set to Y, and
	- '-o newinstance' mount option is specified while mounting devpts

To use multi-instance mount, a container startup script could:

	$ ns_exec -cm /bin/bash
	$ umount /dev/pts
	$ mount -t devpts -o newinstance lxcpts /dev/pts
	$ mount -o bind /dev/pts/ptmx /dev/ptmx
	$ /usr/sbin/sshd -p 1234

where 'ns_exec -cm /bin/bash' is calls clone() with CLONE_NEWNS flag and execs
/bin/bash in the child process. A pty created by the sshd is not visible in
the original mount of /dev/pts.

USER-SPACE-IMPACT:
	- See Documentation/fs/devpts.txt (included in next patch) for user-
	  space impact in multi-instance and mixed-mode operation.
TODO:
	- Update mount(8), pts(4) man pages. Highlight impact of not
	  redirecting /dev/ptmx to /dev/pts/ptmx after a multi-instance mount.

Changelog[v6]:
	- [Dave Hansen] Use new get_init_pts_sb() interface
	- [Serge Hallyn] Don't bother displaying 'newinstance' in show_options
	- [Serge Hallyn] Use macros (PARSE_REMOUNT/PARSE_MOUNT) instead of 0/1.
	- [Serge Hallyn] Check error return from get_sb_single() (now
	  get_init_pts_sb())
	- devpts_pty_kill(): don't dput error dentries

Changelog[v5]:
	- Move get_sb_ref() definition to earlier patch
	- Move usage info to Documentation/filesystems/devpts.txt (next patch)
	- Make ptmx node even in init_pts_ns, now that default mode is 0000
	  (defined in earlier patch, enabled here).
	- Cache ptmx dentry and use to update mode during remount
	  (defined in earlier patch, enabled here).
	- Bugfix: explicitly ignore newinstance on remount (if newinstance was
	  specified on remount of initial mount, it would be ignored but
	  /proc/mounts would imply that the option was set)

Changelog[v4]:

	- Update patch description to address H. Peter Anvin's comments
	- Consolidate multi-instance mode code under new config token,
	  CONFIG_DEVPTS_MULTIPLE_INSTANCE.
	- Move usage-details from patch description to
	  Documentation/fs/devpts.txt

Changelog[v3]:
	- Rename new mount option to 'newinstance'
	- Create ptmx nodes only in 'newinstance' mounts
	- Bugfix: parse_mount_options() modifies @data but since we need to
	  parse the @data twice (once in devpts_get_sb() and once during
	  do_remount_sb()), parse a local copy of @data in devpts_get_sb().
	  (restructured code in devpts_get_sb() to fix this)

Changelog[v2]:
	- Support both single-mount and multiple-mount semantics and
	  provide '-onewmnt' option to select the semantics.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

See comments in the function header for details. The new interface will
be used in a follow-on patch.

Changelog [v2]:
	[Dave Hansen] Replace get_sb_ref() in fs/super.c with get_init_pts_sb()
	and make the new interface private to devpts
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

/dev/ptmx is closely tied to the devpts filesystem. An open of /dev/ptmx,
allocates the next pty index and the associated device shows up in the
devpts fs as /dev/pts/n.

Wih multiple instancs of devpts filesystem, during an open of /dev/ptmx
we would be unable to determine which instance of the devpts is being
accessed.

So we move the 'ptmx' node into /dev/pts and use the inode of the 'ptmx'
node to identify the superblock and hence the devpts instance.  This patch
adds ability for the kernel to internally create the [ptmx, c, 5:2] device
when mounting devpts filesystem.  Since the ptmx node in devpts is new and
may surprise some userspace scripts, the default permissions for the new
node is 0000.  These permissions can be changed either using chmod or by
remounting with the new '-o ptmxmode=0666' mount option.

Changelog[v5]:
	- [Serge Hallyn bugfix]: Letting new_inode() assign inode number to
	  ptmx can collide with hand-assigning inode numbers to ptys. So,
	  hand-assign specific inode number to ptmx node also.
	- [Serge Hallyn]: Maybe safer to grab root dentry mutex while creating
	  ptmx node
	- [Bugfix with Serge Hallyn] Replace lookup_one_len() in mknod_ptmx()
	  wih d_alloc_name() (lookup during ->get_sb() locks up system). To
	  simplify patchset, fold the ptmx_dentry patch into this.

Changelog[v4]:
	- Change default permissions of pts/ptmx node to 0000.
	- Move code for ptmxmode under #ifdef CONFIG_DEVPTS_MULTIPLE_INSTANCES.

Changelog[v3]:
	- Rename ptmx_mode to ptmxmode (for consistency with 'newinstance')

Changelog[v2]:
	- [H. Peter Anvin] Remove mknod() system call support and create the
	  ptmx node internally.

Changelog[v1]:
	- Earlier version of this patch enabled creating /dev/pts/tty as
	  well. As pointed out by Al Viro and H. Peter Anvin, that is not
	  really necessary.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move code to parse mount options into a separate function so it can
(later) be shared between mount and remount operations.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With support for multiple mounts of devpts, the 'config' structure really
represents per-mount options rather than config parameters. Rename 'config'
structure to 'pts_mount_opts' and store it in the super-block.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To enable multiple mounts of devpts, 'allocated_ptys' must be a per-mount
variable rather than a global variable.  Move 'allocated_ptys' into the
super_block's s_fs_info.

Changelog[v2]:
	Define and use DEVPTS_SB() wrapper.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the 'devpts_root' global variable and find the root dentry using
the super_block. The super-block can be found from the device inode, using
the new wrapper, pts_sb_from_inode().

Changelog: This patch is based on an earlier patchset from Serge Hallyn
	   and Matt Helsley.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now the main work is done its polishing time
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes the loss of echoed (and other ldisc-generated characters) when
the tty is stopped or when the driver output buffer is full (happens
frequently for input during continuous program output, such as ^C)
and removes the Big Kernel Lock from the N_TTY line discipline.

Adds an "echo buffer" to the N_TTY line discipline that handles all
ldisc-generated output (including echoed characters).  Along with the
loss of characters, this also fixes the associated loss of sync between
tty output and the ldisc state when characters cannot be immediately
written to the tty driver.

The echo buffer stores (in addition to characters) state operations that need
to be done at the time of character output (like management of the column
position).  This allows echo to cooperate correctly with program output,
since the ldisc state remains consistent with actual characters written.

Since the echo buffer code now isolates the tty column state code
to the process_out* and process_echoes functions, we can remove the
Big Kernel Lock (BKL) and replace it with mutex locks.

Highlights are:

* Handles echo (and other ldisc output) when tty driver buffer is full
  - continuous program output can block echo
* Saves echo when tty is in stopped state (e.g. ^S)
  - (e.g.: ^Q will correctly cause held characters to be released for output)
* Control character pairs (e.g. "^C") are treated atomically and not
  split up by interleaved program output
* Line discipline state is kept consistent with characters sent to
  the tty driver
* Remove the big kernel lock (BKL) from N_TTY line discipline
Signed-off-by: NJoe Peterson <joe@skyrush.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add spin_lock_irqsave() when receive and transfer data.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Bug description:
The IRDA receiver may can't receiving any more after processed some signals.

To duplicate this issue is put three IRDA devices together, one blackfin,
two none blackfin, they will detect each other. Let one none blackfin devices
irdaping the blackfin devices, when it stopped print out ping information,
it is the time that blackfin stoped receiving, the time is random.

The related register bit is OK, the other devices is sending data continuously.
But no interrupt come.

Fixing:
I tried Michael's suggestion that request the UARTx error interrupt, and reset
the IRDA when found FE error. This method helps much, but it can't completely
avoid stop.

Reset the IRDA before every time sending the data is more safe.
Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (34 commits)
  nfsd race fixes: jfs
  nfsd race fixes: reiserfs
  nfsd race fixes: ext4
  nfsd race fixes: ext3
  nfsd race fixes: ext2
  nfsd/create race fixes, infrastructure
  filesystem notification: create fs/notify to contain all fs notification
  fs/block_dev.c: __read_mostly improvement and sb_is_blkdev_sb utilization
  kill ->dir_notify()
  filp_cachep can be static in fs/file_table.c
  fix f_count description in Documentation/filesystems/files.txt
  make INIT_FS use the __RW_LOCK_UNLOCKED initialization
  take init_fs to saner place
  kill vfs_permission
  pass a struct path * to may_open
  kill walk_init_root
  remove incorrect comment in inode_permission
  expand some comments (d_path / seq_path)
  correct wrong function name of d_put in kernel document and source comment
  fix switch_names() breakage in short-to-short case
  ...

jfs version of Al Viro's nfsd race patches
Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... and the same for reiserfs.  The difference here is that we need
insert_inode_locked4() to match iget5_locked().
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

ext3 analog of the previous patch
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* make ext2_new_inode() put the inode into icache in locked state
* do not unlock until the inode is fully set up; otherwise nfsd
might pick it in half-baked state.
* make sure that ext2_new_inode() does *not* lead to two inodes with the
same inumber hashed at the same time; otherwise a bogus fhandle coming
from nfsd might race with inode creation:

nfsd: iget_locked() creates inode
nfsd: try to read from disk, block on that.
ext2_new_inode(): allocate inode with that inumber
ext2_new_inode(): insert it into icache, set it up and dirty
ext2_write_inode(): get the relevant part of inode table in cache,
set the entry for our inode (and start writing to disk)
nfsd: get CPU again, look into inode table, see nice and sane on-disk
inode, set the in-core inode from it

oops - we have two in-core inodes with the same inumber live in icache,
both used for IO.  Welcome to fs corruption...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

new helpers - insert_inode_locked() and insert_inode_locked4().
Hash new inode, making sure that there's no such inode in icache
already.  If there is and it does not end up unhashed (as would
happen if we have nfsd trying to resolve a bogus fhandle), fail.
Otherwise insert our inode into hash and succeed.

In either case have i_state set to new+locked; cleanup ends up
being simpler with such calling conventions.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Creating a generic filesystem notification interface, fsnotify, which will be
used by inotify, dnotify, and eventually fanotify is really starting to
clutter the fs directory.  This patch simply moves inotify and dnotify into
fs/notify/inotify and fs/notify/dnotify respectively to make both current fs/
and future notification tidier.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

- iget5_locked in bdget really needs blockdev_superblock, instead of
  bd_mnt, so bd_mnt could be just a local variable;

- blockdev_superblock really needs __read_mostly, while local var bd_mnt
  not;

- make use of sb_is_blkdev_sb in bd_forget, instead of direct reference
  to blockdev_superblock.
Signed-off-by: NDenis ChengRq <crquan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Remove the hopelessly misguided ->dir_notify().  The only instance (cifs)
has been broken by design from the very beginning; the objects it creates
are never destroyed, keep references to struct file they can outlive, nothing
that could possibly evict them exists on close(2) path *and* no locking
whatsoever is done to prevent races with close(), should the previous, er,
deficiencies someday be dealt with.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Instead of creating the "filp" kmem_cache in vfs_caches_init(),
we can do it a litle be later in files_init(), so that filp_cachep
is static to fs/file_table.c
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Documentation/filesystems/files.txt was not updated when
f_count became an atomic_long_t.
atomic_long_inc_not_zero() is now used instead of atomic_inc_not_zero()
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

[AV: rediffed on top of unification of init_fs]
Initialization of init_fs still uses the deprecated RW_LOCK_UNLOCKED macro.
This patch updates it to use the __RW_LOCK_UNLOCKED(lock) macro.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

With all the nameidata removal there's no point anymore for this helper.
Of the three callers left two will go away with the next lookup series
anyway.

Also add proper kerneldoc to inode_permission as this is the main
permission check routine now.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>