- 22 4月, 2015 2 次提交
-
-
由 Matthew Wilcox 提交于
The only reason to keep parisc's private asm/scatterlist.h was that it had the macro sg_virt_addr(). Convert all callers to use something else (sometimes just sg->offset was enough, others should use sg_virt()), and we can just use the asm-generic scatterlist.h instead. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NDave Anglin <dave.anglin@bell.net> Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Linus Torvalds 提交于
My 'allmodconfig' build is _almost_ free of warnings, and most of the remaining ones are for legacy drivers that just do bad things that I can't find it in my black heart to care too much about. But this one was just annoying me: drivers/media/v4l2-core/videobuf2-core.c:3256:26: warning: unused variable ‘fileio’ [-Wunused-variable] because commit 0e661006 ("[media] vb2: fix 'UNBALANCED' warnings when calling vb2_thread_stop()") removed all users of 'fileio' and instead calls "__vb2_cleanup_fileio(q)" to clean up q->fileio. But the now unused 'fileio' variable was left around. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 4月, 2015 2 次提交
-
-
由 Grygorii Strashko 提交于
Add handling of missed events in omap_dss_pm_notif which are needed to support hibernation (suspend to disk). Signed-off-by: NGrygorii Strashko <Grygorii.Strashko@linaro.org> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
We don't need VT switch when suspending/resuming, so disable it. This speeds up suspend/resume. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Cc: NeilBrown <neil@brown.name>
-
- 18 4月, 2015 8 次提交
-
-
由 Quentin Lambert 提交于
Replace occurences of the pci api by appropriate call to the dma api. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr) @deprecated@ idexpression id; position p; @@ ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @bad1@ idexpression id; position deprecated.p; @@ ...when != &id->dev when != pci_get_drvdata ( id ) when != pci_enable_device ( id ) ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @depends on !bad1@ idexpression id; expression direction; position deprecated.p; @@ ( - pci_dma_supported@p ( id, + dma_supported ( &id->dev, ... + , GFP_ATOMIC ) | - pci_alloc_consistent@p ( id, + dma_alloc_coherent ( &id->dev, ... + , GFP_ATOMIC ) ) Signed-off-by: NQuentin Lambert <lambert.quentin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Erez Shitrit 提交于
Currently, iflink of the parent interface was always accessed, even when interface didn't have a parent and hence we crashed there. Handle the interface types properly: for a child interface, return the ifindex of the parent, for parent interface, return its ifindex. For child devices, make sure to set the parent pointer prior to invoking register_netdevice(), this allows the new ndo to be called by the stack immediately after the child device is registered. Fixes: 5aa7add8 ('infiniband/ipoib: implement ndo_get_iflink') Reported-by: NHonggang Li <honli@redhat.com> Signed-off-by: NErez Shitrit <erezsh@mellanox.com> Signed-off-by: NHonggang Li <honli@redhat.com> Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>+ Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
drivers/net/ethernet/sfc/selftest.c: In function ‘efx_iterate_state’: drivers/net/ethernet/sfc/selftest.c:388:9: warning: passing argument 1 of ‘memcpy’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-array-qualifiers] This is because the msg[] member of struct efx_loopback_payload is marked as 'const'. Remove that. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Oetken 提交于
Fix bug which occurs when more than <limit> packets are available during napi-poll, leading to "delays" and retransmissions on the network. Check for (count < limit) before checking the get_rx_status in tse_rx-function. Function get_rx_status is reading from the response-fifo. If there is currently a response in the fifo, reading the last byte of the response pops the value from the fifo. If the limit is checked as second condition and the limit is reached the fifo is popped but the packet is not processed. Signed-off-by: NAndreas Oetken <ennoerlangen@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
In commit 04ffcb25 ("net: Add ndo_gso_check") Tom originally added the 'dev' argument to be able to call ndo_gso_check(). Then later, when generalizing this in commit 5f35227e ("net: Generalize ndo_gso_check to ndo_features_check") Jesse removed the call to ndo_gso_check() in netif_needs_gso() by calling the new ndo_features_check() in a different place. This made the 'dev' argument unused. Remove the unused argument and go back to the code as before. Cc: Tom Herbert <therbert@google.com> Cc: Jesse Gross <jesse@nicira.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
When you redirect a VLAN device to any device, you end up with crap in af_packet on the xmit path because hard_header_len is not equal to skb->mac_len. So the redirected packet contains four extra bytes at the start which then gets interpreted as part of the MAC address. This patch fixes this by only pushing skb->mac_len. We also need to fix ifb because it tries to undo the pushing done by act_mirred. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 James Bottomley 提交于
mvsas is giving a General protection fault when it encounters an expander attached ATA device. Analysis of mvs_task_prep_ata() shows that the driver is assuming all ATA devices are locally attached and obtaining the phy mask by indexing the local phy table (in the HBA structure) with the phy id. Since expanders have many more phys than the HBA, this is causing the index into the HBA phy table to overflow and returning rubbish as the pointer. mvs_task_prep_ssp() instead does the phy mask using the port properties. Mirror this in mvs_task_prep_ata() to fix the panic. Reported-by: NAdam Talbot <ajtalbot1@gmail.com> Tested-by: NAdam Talbot <ajtalbot1@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
由 Hannes Reinecke 提交于
On systems with shared interrupts the interrupt routine might be called as soon as the interrupt is enabled. As this might happen before pci_set_drvdata() is called the system would crash. Reported-by: NAndreas Brogle <anbro@ok.de> Tested-by: NAndreas Brogle <anbro@ok.de> Signed-off-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
- 17 4月, 2015 28 次提交
-
-
由 Ben Dooks 提交于
Change the __raw IO calls to readl/write_relaxed which makes the driver endian agnostic to run properly on big endian systems. Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Andrew Victor <linux@maxim.org.za> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Krzysztof Kozlowski 提交于
The RTC driver supports two flavors of S5M devices: S5M8767-like and S2MPS14-like. On S2MPS13 and S2MPS14 devices the RTC module is the same so we want to re-use the existing support of S2MPS14. However device type was passed from parent MFD driver in platform data structure. This way for the S2MPS13 device the main MFD driver passed device type of 'S2MPS13X'. Instead decouple detecting of device type between main MFD and RTC driver. This allows adding support for other S2MPS14 variations (like S2MPS11 and S2MPS13) easily by adding to mfd/sec-core.c: static const struct mfd_cell s2mps13_devs[] = { { .name = "s2mps14-rtc", } }; Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Davidlohr Bueso 提交于
sync_buffer() needs the mmap_sem for two distinct operations, both only occurring upon user context switch handling: 1) Dealing with the exe_file. 2) Adding the dcookie data as we need to lookup the vma that backs it. This is done via add_sample() and add_data(). This patch isolates 1), for it will no longer need the mmap_sem for serialization. However, for now, make of the more standard get_mm_exe_file(), requiring only holding the mmap_sem to read the value, and relying on reference counting to make sure that the exe file won't dissappear underneath us while doing the get dcookie. As a consequence, for 2) we move the mmap_sem locking into where we really need it, in lookup_dcookie(). The benefits are twofold: reduce mmap_sem hold times, and cleaner code. [akpm@linux-foundation.org: export get_mm_exe_file for arch/x86/oprofile/oprofile.ko] Signed-off-by: NDavidlohr Bueso <dbueso@suse.de> Cc: Robert Richter <rric@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Carpenter 提交于
Using the indenting we can see the curly braces were obviously intended. This is a static checker fix, but my guess is that we don't read enough bytes, because we don't calculate "t_len" correctly. Fixes: f1d82698 ('memstick: use fully asynchronous request processing') Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
This kthread is not loop at all due to break at the end of the loop. Make that function linear, with no while loop. And remove an unnecessary cast. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Neaten the logging a bit by adding #define pr_fmt Miscellanea: o Remove __FILE__/__func__ uses o Coalesce formats adding missing spaces o Align arguments o (rtc-cmos) Integrated 2 consecutive messages Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Heiko Stübner 提交于
The hym8563 datasheet describes the clock output control-bit as "when set to logic 0, the square wave output is enable, when set to logic 1, the CLKOUT output is inhibited". But in reality the setting is exactly opposite. Before now, the clock output was not really used, but on the rk3288 soc this generated clock is used to supply the temperature sensor block and the swapped bit value prevented it from working. With the corrected value, the tsadc now reports correct values. Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Krzysztof Kozlowski 提交于
s3c_rtc_gettime() already returns the result of rtc_valid_tm() on the obtained time so get rid of another call to rtc_valid_tm(). Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: NChanwoo Choi <cw00.choi@samsung.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lokesh Vutla 提交于
module_platform_driver_probe() prevents driver from requesting probe deferral. So using module_platform_drive() to support probe deferral. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lokesh Vutla 提交于
RTC is present in AM43xx and DRA7xx also. Updating the Kconfig to depend on ARCH_OMAP or ARCH_DAVINCI Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lokesh Vutla 提交于
RTC module contains a kicker mechanism to prevent any spurious writes from changing the register values. This mechanism requires two MMR writes to the KICK0 and KICK1 registers with exact data values before the kicker lock mechanism is released. Currently the driver release the lock in the probe and leaves it enabled until the rtc driver removal. This eliminates the idea of preventing spurious writes when RTC driver is loaded. So implement rtc lock and unlock functions before and after register writes. This is as advised by Paul to implement lock and unlock functions in the driver and not to unlock and leave it in probe. The same discussion can be seen here: http://www.mail-archive.com/linux-omap%40vger.kernel.org/msg111588.htmlSigned-off-by: NLokesh Vutla <lokeshvutla@ti.com> Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Krzysztof Kozlowski 提交于
Initialize the device time (if it is wrong) before registering RTC device to fix following error message during rtc-s3c probe: [ 2.215414] rtc (null): read_time: fail to read [ 2.216322] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: NChanwoo Choi <cw00.choi@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Aaro Koskinen 提交于
Use function name in the error log instead of __FILE__. Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Aaro Koskinen 提交于
__rtc_read_time logs should be debug logs instead of error logs. For example, when the RTC clock is not set, it's not really useful to print a kernel error log every time someone tries to read the clock: ~ # hwclock -r [ 604.508263] rtc rtc0: read_time: fail to read hwclock: RTC_RD_TIME: Invalid argument If there's a real error, it's likely that lower level or higher level code will tell it anyway. Make these logs debug logs, and also print the error code for the read failure. Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Aaro Koskinen 提交于
In some error cases RTC name is used before it is initialized: rtc-rs5c372 0-0032: clock needs to be set rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.6 rtc (null): read_time: fail to read rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0 Fix by initializing the name early. Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Krzysztof Kozlowski 提交于
The S2MPS13 RTC is almost the same as S2MPS14. The differences when updating alarm are: 1. Set WUDR+AUDR field instead of WUDR+RUDR. 2. Clear the AUDR field later (it is not auto-cleared). Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Baruch Siach 提交于
Add driver for the RTC hardware block on the Conexant CX92755 SoC, from the Digicolor series of SoCs. Tested on the Equinox evaluation board for the CX92755 chip. [akpm@linux-foundation.org: build command arrays at compile-time] Signed-off-by: NBaruch Siach <baruch@tkos.co.il> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Heiko Stuebner 提交于
When the clock is disabled, do not return a rate of 0 but instead return the rate the clock will be running at after it gets enabled. This prevents problems when the core clock code is trying to determine a suitable rate, while the clock is still off. Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adam Ward 提交于
Signed-off-by: NAdam Ward <adam.ward.opensource@diasemi.com> Tested-by: NAdam Ward <adam.ward.opensource@diasemi.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adam Ward 提交于
Signed-off-by: NAdam Ward <adam.ward.opensource@diasemi.com> Tested-by: NAdam Ward <adam.ward.opensource@diasemi.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adam Ward 提交于
The RTC is in a different clock domain so a quick read after write can retrieve a mangled value of the old/new values Signed-off-by: NAdam Ward <adam.ward.opensource@diasemi.com> Tested-by: NAdam Ward <adam.ward.opensource@diasemi.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joshua Kinard 提交于
Fix two minor sparse warnings: CHECK drivers/rtc/rtc-ds1685.c drivers/rtc/rtc-ds1685.c:2178:1: warning: function 'ds1685_rtc_poweroff' with external linkage has definition drivers/rtc/rtc-ds1685.c:802:23: warning: Using plain integer as NULL pointer Fixes: aaaf5fbf ("rtc: add driver for DS1685 family of real time clocks") Signed-off-by: NJoshua Kinard <kumba@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joshua Kinard 提交于
The rtc driver core now sets the platform_driver 'owner' property, so remove the assignment from the DS1685 driver. Fixes: aaaf5fbf: "rtc: add driver for DS1685 family of real time clocks" Signed-off-by: NJoshua Kinard <kumba@gentoo.org> Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Krzysztof Kozlowski 提交于
The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chanwoo Choi 提交于
The current functions in s3c-rtc driver execute clk_enable/disable() to control clocks and some functions execute s3c_rtc_alarm_clk_enable() unnecessarily. So this patch deletes the duplicate clock control and spilts s3c_rtc_alarm_clk_enable() out as s3c_rtc_enable_clk()/s3c_rtc_disable_clk() to improve readability. Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kukjin Kim <kgene@kernel.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Floris Bos 提交于
When using device trees on the ARM platform, it is not certain at compile time whether or not the system will have a RTC. If one enables CONFIG_HCTOSYS just in case the system booted has a RTC, and it turns out not to be, this will result in a big fat "unable to open rtc device" error being printed to console, even when "quiet" is set in the kernel cmdline. Fix this by outputting the message with loglevel info instead. Signed-off-by: NFloris Bos <bos@je-eigen-domein.nl> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Martin Kepplinger 提交于
Despite its name, sign_extend32() is safe to use for 8 bit types too. (See https://lkml.org/lkml/2015/1/18/289). Signed-off-by: NMartin Kepplinger <martink@posteo.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Robinson 提交于
Set the of_match_table for this driver so that devices can be described in the device tree. This device is used in the Trimslice and is already defined in the Trimslice device tree. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com> Cc: Mike Rapoport <mike@compulab.co.il> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-