- 30 7月, 2014 1 次提交
-
-
由 Laurent Pinchart 提交于
The maximum pitch constraint for the hardware is expressed in pixels. Convert it to bytes to validate frame buffer creation, as frame buffer pitches are expressed in bytes. Reported-by: NPhil Edworthy <phil.edworthy@renesas.com> Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 24 7月, 2014 2 次提交
-
-
由 Dave Airlie 提交于
This chunk was no longer required from what I can see, or at least it is doing the wrong thing, as I confused intel_connector->encoder and connector->encoder. Drop it for now, to remove the warnings at bootup. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
When I moved the irq disable down to after display disable, I didn't realise the gt suspend also required irqs off, so move it down as well. Fixes WARNs seen at suspend/resume time. v2: moved the rps flush down as well. Tested-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 23 7月, 2014 2 次提交
-
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Dave Airlie 提交于
pull the msm patch in. * 'component-for-drm' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: drm: msm: update to use component match support
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Dave Airlie 提交于
Merge armada changes, I've confirmed the componenet changes are same as in Greg's tree. * 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: drm/armada: register crtc with port drm/armada: permit CRTCs to be registered as separate devices dt-bindings: add Marvell Dove LCD controller documentation drm/armada: update Armada 510 (Dove) to use "ext_ref_clk1" as the clock drm/armada: convert to componentized support drm: add of_graph endpoint helper to find possible CRTCs component: fix bug with legacy API drm/armada: make variant a CRTC thing drm/armada: move variant initialisation to CRTC init drm/armada: use number of CRTCs registered drm/armada: move IRQ handling into CRTC component: add support for component match array component: ignore multiple additions of the same component component: fix missed cleanup in case of devres failure
-
- 22 7月, 2014 15 次提交
-
-
由 Chris Wilson 提交于
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
fixes sparse warning, and removes potentially dangerous name from namespace. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
fixes sparse warning. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Russell King 提交于
Regular randconfig nightly testing has detected problems with omapdrm. omapdrm fails to build when the kernel is built to support 64-bit DMA addresses and/or 64-bit physical addresses due to an assumption about the width of these types. Use %pad to print DMA addresses, rather than %x or %Zx (which is even more wrong than %x). Avoid passing a uint32_t pointer into a function which expects dma_addr_t pointer. drivers/gpu/drm/omapdrm/omap_plane.c: In function 'omap_plane_pre_apply': drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Werror=format] drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Werror=format] make[5]: *** [drivers/gpu/drm/omapdrm/omap_plane.o] Error 1 drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_get_paddr': drivers/gpu/drm/omapdrm/omap_gem.c:794:4: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Werror=format] drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_describe': drivers/gpu/drm/omapdrm/omap_gem.c:991:4: error: format '%Zx' expects argument of type 'size_t', but argument 7 has type 'dma_addr_t' [-Werror=format] drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_init': drivers/gpu/drm/omapdrm/omap_gem.c:1470:4: error: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Werror=format] make[5]: *** [drivers/gpu/drm/omapdrm/omap_gem.o] Error 1 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c: In function 'dmm_txn_append': drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:226:2: error: passing argument 3 of 'alloc_dma' from incompatible pointer type [-Werror] make[5]: *** [drivers/gpu/drm/omapdrm/omap_dmm_tiler.o] Error 1 make[5]: Target `__build' not remade because of errors. make[4]: *** [drivers/gpu/drm/omapdrm] Error 2 Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Russell King 提交于
Regular nightly randconfig build testing discovered these warnings: drivers/gpu/drm/bochs/bochs_drv.c:100:12: warning: 'bochs_pm_suspend' defined but not used [-Wunused-function] drivers/gpu/drm/bochs/bochs_drv.c:117:12: warning: 'bochs_pm_resume' defined but not used [-Wunused-function] Fix these by adding the same condition that SET_SYSTEM_SLEEP_PM_OPS() uses. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Russell King 提交于
Regular nightly randconfig build testing discovered these warnings: drivers/gpu/drm/cirrus/cirrus_drv.c:79:12: warning: 'cirrus_pm_suspend' defined but not used [-Wunused-function] drivers/gpu/drm/cirrus/cirrus_drv.c:96:12: warning: 'cirrus_pm_resume' defined but not used [-Wunused-function] Fix these by adding the same condition that SET_SYSTEM_SLEEP_PM_OPS() uses. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Russell King 提交于
drivers/gpu/drm/shmobile/shmob_drm_drv.c:300:5: warning: "CONFIG_PM_SLEEP" is not defined [-Wundef] Always use #ifdef with CONFIG symbols, never just bare #if Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Russell King 提交于
drivers/gpu/drm/rcar-du/rcar_du_drv.c:190:5: warning: "CONFIG_PM_SLEEP" is not defined [-Wundef] Always use #ifdef with CONFIG symbols, never just bare #if Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jean-Francois Moine 提交于
In tda998x_encoder_destroy(), priv->cec is never NULL, so, remove its test. Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Merge branch 'drm-i915-mst-support-next' of git://people.freedesktop.org/~airlied/linux into drm-next Evil super powers maintainer abuse, get i915 mst support into -next. * 'drm-i915-mst-support-next' of git://people.freedesktop.org/~airlied/linux: drm/i915: mst topology dumper in debugfs (v0.2) drm/i915: add DP 1.2 MST support (v0.7) drm/i915: split conversion function out into separate function drm/i915: check connector->encoder before using it. i915: split some DP modesetting code into a separate function drm/i915: add some registers need for displayport MST support.
-
由 Dave Airlie 提交于
use the mst helper code to dump the topology in debugfs. v0.2: drop is_mst check - as we want to dump other info Reviewed-by: NTodd Previte <tprevite@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
This adds DP 1.2 MST support on Haswell systems. Notes: a) this reworks irq handling for DP MST ports, so that we can avoid the mode config locking in the current hpd handlers, as we need to process up/down msgs at a better time. Changes since v0.1: use PORT_PCH_HOTPLUG to detect short vs long pulses add a workqueue to deal with digital events as they can get blocked on the main workqueue beyong mode_config mutex fix a bunch of modeset checker warnings acks irqs in the driver cleanup the MST encoders Changes since v0.2: check irq status again in work handler move around bring up and tear down to fix DPMS on/off use path properties. Changes since v0.3: updates for mst apis more state checker fixes irq handling improvements fbcon handling support improved reference counting of link - fixes redocking. Changes since v0.4: handle gpu reset hpd reinit without oopsing check link status on HPD irqs fix suspend/resume Changes since v0.5: use proper functions to get max link/lane counts fix another checker backtrace - due to connectors disappearing. set output type in more places fro, unknown->displayport don't talk to devices if no HPD asserted check mst on short irqs only check link status properly rebase onto prepping irq changes. drop unsued force_act Changes since v0.6: cleanup unused struct entry. [airlied: fix some sparse warnings]. Reviewed-by: NTodd Previte <tprevite@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thierry Reding 提交于
sparse complains about these functions missing a prototype, but looking closer they aren't (and likely not supposed to be) used outside of this source file, so they can be made static. Signed-off-by: NThierry Reding <treding@nvidia.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thierry Reding 提交于
The final parameter to ttm_bo_reserve() is a pointer, therefore callers should use NULL instead of 0. Fixes a bunch of sparse warnings of this type: warning: Using plain integer as NULL pointer Signed-off-by: NThierry Reding <treding@nvidia.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thierry Reding 提交于
The drm_copy_field() function copies strings into userspace buffers, so the first parameter needs to have a __user annotation to avoid warnings from the sparse checker. Signed-off-by: NThierry Reding <treding@nvidia.com> Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 21 7月, 2014 6 次提交
-
-
由 Dave Airlie 提交于
for MST I need to reuse this, so just move it now. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
DP MST will need connectors that aren't connected to specific encoders, add some checks in advance to avoid oopses. Reviewed-by: NTodd Previte <tprevite@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
this is just prep work for mst support. Reviewed-by: NTodd Previte <tprevite@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
These are just from the Haswell spec. Reviewed-by: NTodd Previte <tprevite@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Sachin Kamat 提交于
Makes the code a bit more readable. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NSachin Kamat <sachin.kamat@samsung.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Not enough brown paper bags, you'll have to share one. (oops below). The initial match condition code was racy (locking is coming I hear). then along came: cd234b0b drm/i915: Do not dereference NULL crtc or fb until after checking Chris made an attempt to fix it, Ben "reviewed" it. Daniel merged it. Then drm/i915: Make use of intel_fb_obj() (v2) 2ff8fde1 made it worse by removing the obj check later. All in all, my laptop can't barely turn off the display without hitting this. Posted to #intel-gfx out of niceness, but I've merged this already into drm-next. Here's an oops. [ 11.528185] BUG: unable to handle kernel NULL pointer dereference at 00000000000000d0 [ 11.528233] IP: [<ffffffffa0161fde>] intel_edp_psr_match_conditions+0x1e/0x2e0 [i915] [ 11.528294] PGD 35bc0067 PUD c997c067 PMD 0 [ 11.528321] Oops: 0000 [#1] SMP [ 11.528916] CPU: 3 PID: 244 Comm: kworker/3:2 Not tainted 3.16.0-rc4+ #17 [ 11.528949] Hardware name: LENOVO 20ARS25701/20ARS25701, BIOS GJET72WW (2.22 ) 02/21/2014 [ 11.529004] Workqueue: events intel_edp_psr_work [i915] [ 11.529031] task: ffff8803079fdaa0 ti: ffff8803079c4000 task.ti: ffff8803079c4000 [ 11.529067] RIP: 0010:[<ffffffffa0161fde>] [<ffffffffa0161fde>] intel_edp_psr_match_conditions+0x1e/0x2e0 [i915] [ 11.529129] RSP: 0018:ffff8803079c7d40 EFLAGS: 00010246 [ 11.529155] RAX: 0000000000000000 RBX: ffff88030c11c000 RCX: c000000000000000 [ 11.529189] RDX: 0000000000000001 RSI: 1df0000000000000 RDI: ffff88030c1190d8 [ 11.529222] RBP: ffff8803079c7d60 R08: ffffffff82691140 R09: 0000000000000000 [ 11.529256] R10: ffff8803079fdaa0 R11: 3e00000000000000 R12: ffff88030c11c728 [ 11.529290] R13: ffff88030c1190d8 R14: ffff88031e2d8e00 R15: 00000000000000c0 [ 11.529324] FS: 0000000000000000(0000) GS:ffff88031e2c0000(0000) knlGS:0000000000000000 [ 11.529361] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 11.529389] CR2: 00000000000000d0 CR3: 00000000c8d9d000 CR4: 00000000001407e0 [ 11.529423] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 11.529457] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 11.529489] Stack: [ 11.529500] ffff88030c119000 ffff88030c11c728 ffff88030c1190d8 ffff88031e2d8e00 [ 11.529541] ffff8803079c7d88 ffffffffa01679b2 ffff880035b29a80 ffff880307909f00 [ 11.529583] ffff88031e2d4740 ffff8803079c7df8 ffffffff810a78ab ffffffff810a7849 [ 11.529624] Call Trace: [ 11.529654] [<ffffffffa01679b2>] intel_edp_psr_work+0x52/0x90 [i915] [ 11.529689] [<ffffffff810a78ab>] process_one_work+0x1db/0x540 [ 11.529719] [<ffffffff810a7849>] ? process_one_work+0x179/0x540 [ 11.529750] [<ffffffff810a81ed>] worker_thread+0x11d/0x520 [ 11.529779] [<ffffffff810a80d0>] ? create_and_start_worker+0x60/0x60 [ 11.529810] [<ffffffff810aeb04>] kthread+0xe4/0x100 [ 11.529836] [<ffffffff810aea20>] ? kthread_create_on_node+0x200/0x200 [ 11.529870] [<ffffffff81705ebc>] ret_from_fork+0x7c/0xb0 [ 11.529896] [<ffffffff810aea20>] ? kthread_create_on_node+0x200/0x200 [ 11.529926] Code: ba 31 13 f0 c9 85 f6 75 84 eb d0 66 90 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 48 8b 87 68 ff ff ff 48 8b 9f 28 ff ff ff <48> 8b 80 d0 00 00 00 4c 8b 63 28 48 8b 40 48 48 85 c0 0f 84 1a [ 11.530110] RIP [<ffffffffa0161fde>] intel_edp_psr_match_conditions+0x1e/0x2e0 [i915] [ 11.530163] RSP <ffff8803079c7d40> [ 11.530180] CR2: 00000000000000d0 Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 19 7月, 2014 2 次提交
-
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
misc core patches. * tag 'topic/core-stuff-2014-07-18' of git://anongit.freedesktop.org/drm-intel: drm: Check for connection_mutex in drm_select_eld drm/dp-mst-helper: Don't use uninitialized fields of the sideband message header drm/dp-mst-helper: Avoid reading uninitialized value drm/plane-helper: Use proper plane init function drivers/gpu/drm/drm_buffer.c: remove unnecessary null test before kfree drm: Fix function names in kerneldoc
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
- fbc improvements when stolen memory is tight (Ben) - cdclk handling improvements for vlv/chv (Ville) - proper fix for stuck primary planes on gmch platforms with cxsr (Imre&Ebgert Eich) - gen8 hw semaphore support (Ben) - more execlist prep work from Oscar Mateo - locking fixes for primary planes (Matt Roper) - code rework to support runtime pm for dpms on hsw/bdw (Paulo, Imre & me), but not yet enabled because some fixes from Paulo haven't made the cut - more gpu boost tuning from Chris - as usual piles of little things all over * tag 'drm-intel-next-2014-07-11' of git://anongit.freedesktop.org/drm-intel: (93 commits) drm/i915: Make the RPS interrupt generation mask handle the vlv wa drm/i915: Move RPS evaluation interval counters to i915->rps drm/i915: Don't cast a pointer to void* unnecessarily drm/i915: don't read LVDS regs at compute_config time drm/i915: check the power domains in intel_lvds_get_hw_state() drm/i915: check the power domains in ironlake_get_pipe_config() drm/i915: don't skip shared DPLL assertion on LPT drm/i915: Only touch WRPLL hw state in enable/disable hooks drm/i915: Switch to common shared dpll framework for WRPLLs drm/i915: ->enable hook for WRPLLs drm/i915: ->disable hook for WRPLLs drm/i915: State readout support for WRPLLs drm/i915: add POWER_DOMAIN_PLLS drm/i915: Document that the pll->mode_set hook is optional drm/i915: Basic shared dpll support for WRPLLs drm/i915: Precompute static ddi_pll_sel values in encoders drm/i915: BDW also has special-purpose DP DDI clocks drm/i915: State readout and cross-checking for ddi_pll_sel drm/i915: Move ddi_pll_sel into the pipe config drm/i915: Add a debugfs file for the shared dpll state ...
-
- 18 7月, 2014 12 次提交
-
-
由 Sean Paul 提交于
drm_select_eld should check for mode_config.connection_mutex as well as mode_config.mutex: We need that since this function checks conector->encoder links. Signed-off-by: NSean Paul <seanpaul@chromium.org> [danvet: Pimp commit message slightly.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Damien Lespiau 提交于
We could be using uninitialized fields of the header in drm_dp_encode_sideband_msg_hdr(), for instance hdr->somt is set to 1 in the first patcket but never set to 0 otherwise. Always clear the header at the start then. Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Damien Lespiau 提交于
A static analysis tool tells me that we could try to read an uninitialized 'ret' value. Plug that. Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Matt Roper 提交于
drm_plane_init() (the legacy plane initialization function) takes a bool as its final parameter; originally this indicated whether a plane was 'private' to the driver (before the DRM core understood non-overlay planes), now it indicates whether the plane is a primary plane (private planes were used by some drivers to represent primary planes internally). The newer drm_universal_plane_init() take an 'enum drm_plane_type' as its final parameter to allow the caller to specify the specific plane type desired (primary, cursor, or overlay). Due to a rebasing mistake, the primary plane helper is currently passing DRM_PLANE_TYPE_PRIMARY (enum value = 1) for drm_plane_init()'s boolean 'is_primary' parameter. This winds up giving the correct behavior since DRM_PLANE_TYPE_PRIMARY evaluates as true, but is confusing to anyone reading the code since we're passing an enum value (one of three possible values) for a boolean parameter. Replace the primary plane helper's call to drm_plane_init() with drm_universal_plane_init() so that the parameter and value types match up as expected. Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Fabian Frederick 提交于
This patch removes special case of last element and loops from idx to 0. Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Thierry Reding 提交于
The drm_property_create_enum(), drm_property_create_bitmask() and drm_property_create_range() contain the wrong name in the kerneldoc comment. This is probably simply a copy/paste mistake. Signed-off-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-