Now that the omapdss interface has been reworked so that omapdrm can use
dispc directly, we have been able to fix the remaining functional kms
issues with omapdrm.  And in the mean time the PM sequencing and many
other of that open issues have been solved.  So I think it makes sense
to finally move omapdrm out of staging.
Signed-off-by: NRob Clark <robdclark@gmail.com>

Added power management capabilities into the omapdrm and DMM drivers.
During suspend, we don't need to do anything to maintain the state of
the LUT.  We have all the necessary information to recreate the mappings
of the GEM object list maintained by the omapdrm driver.

On resume, the DMM resume handler will first reprogram the LUT to point
to the dummy page.  The subsequent resume handler in the omapdrm will call
into the DMM and reprogram each of the buffer objects.  This will ensure
that all of the necessary objects will be pinned into the DMM properly.

Order of suspend/resume handlers is done by device creation.  We create
the DMM device before the omapdrm, so the correct order is maintained.
Signed-off-by: NAndy Gross <andy.gross@ti.com>
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch changes the omapdrm KMS to bypass the omapdss "compat"
layer and use the core omapdss API directly.  This solves some layering
issues that would cause unpin confusion vs GO bit status, because we
would not know whether a particular pageflip or overlay update has hit
the screen or not.  Now instead we explicitly manage the GO bits in
dispc and handle the vblank/framedone interrupts ourself so that we
always know which buffers are being scanned out at any given time, and
so on.

As an added bonus, we no longer leave the last overlay buffer pinned
when the display is disabled, and have been able to add the previously
missing vblank event handling.

v1: original
v2: rebased on latest staging-next and omapdss patches from Tomi and
    review comments from Archit Taneja
Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NArchit Taneja <archit@ti.com>
Reviewed-by: NSumit Semwal <sumit.semwal@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The following warnings fixed.
- WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The following errors fixed.
- ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove usage of plat/cpu.h and get information from platform data
instead.  This enables omapdrm to be built with ARCH_MULTIPLATFORM.
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Added support for zorder changes through DRM plane properties
Signed-off-by: NAndre Renaud <andre@bluewatersys.com>
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use tiled buffers for rotated/reflected scanout, with CRTC and plane
properties as the interface for userspace to configure rotation.
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Register OMAP DRM/KMS platform device.  DMM is split into a
separate device using hwmod.
Signed-off-by: NAndy Gross <andy.gross@ti.com>
Signed-off-by: NRob Clark <rob.clark@linaro.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This adds support to re-import omapdrm's own buffers.  Importing buffers
allocated by other drivers can be added later, but for now is not needed
(we don't yet have any other exportering drivers to test with).
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support for mmap'ing buffers via dmabuf.  For handling mmap of
cached buffers correctly, fault handling and PTE shootdown are used
to track dirty pages and automagically handle cache flushes before
dma access to the buffer.
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

For now just implementing the exporting APIs, not yet importing.  And
kmap is rejected on tiled buffers (although the usefulness of that seems
questionable, but could be added later if needed).
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The endwin irq indicates that DSS has finished scanning out a buffer.
Use this to trigger page-flip event to userspace, so this happens
only *after* the previous buffer is finished.
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add some additional debugfs file to aid in tracking buffer usage.
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When flipping, defer unpinning until scanout completes, as indicated
by the appropriate END_WIN irq.

This also re-organizes things a bit, in replacing omap_fb_{pin,unpin}
with omap_fb_replace(), to make it easier to add support for scanout
synchronized DMM refill mode (flipping by just reprogramming DMM
synchronized with DSS scanout).
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a workqueue for omapdrm driver, which is needed for at least a
couple things currently: (1) moving omap_gem_roll() to a non-atomic
context, (2) synchronizing page flips w/ DSS scanout related irq's
(in particular not unmapping previous buffer until DSS finishes
scanout).
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Get the supported formats for a plane from ovl's supported_modes
bitmask.
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add support in framebuffer objects for other color formats and multi-
planar YUV (NV12).  Since this requires changing the API between the
plane and fb for getting scanout information (paddr, etc), take
advantage of the opportunity and put in place a way to allow fb's to
be unpinned when they are not being scanned out.  Now, before start
of scanout the plane calls omap_framebuffer_pin() which takes care
to pin all the backing bo's, then omap_framebuffer_update_scanout()
however many times to update the scanout address(es), etc, and then
when finished omap_framebuffer_unpin().
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Because framebuffer layer and overlay scanout video pipes are basically
thing in OMAP display subsystem (the only difference being that the first
video pipe does not support scaling or YUV formats), much of the CRTC
code is pulled into the plane implementation, and a private plane object
is used by the CRTC object.  This avoids code duplication between the
plane and CRTC.
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Update to reflect changes in:
"drm: add an fb creation ioctl that takes a pixel format v5"
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Right now just a tiler_map file to dump a 2d map of which areas in
tiler/dmm have pinned buffers (or reservations).  In the future more
could be added.
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add support for YWRAP scrolling by shuffling pages around in DMM
instead of sw blits.

Note that fbcon only utilizes this mode if the y resolution is
divided evenly by the font height.  So, for example, a 1920x1080
display using a 16 pixel tall font will not utilize this, but a
1280x1024 display would.
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

TILER/DMM provides two features for omapdrm GEM objects:
1) providing a physically contiguous view to discontiguous memory
   for hw initiators that cannot otherwise support discontiguous
   buffers (DSS scanout, IVAHD video decode/encode, etc)
2) providing untiling for 2d tiled buffers, which are used in some
   cases to provide rotation and reduce memory bandwidth for hw
   initiators that tend to access data in 2d block patterns.

For 2d tiled buffers, there are some additional complications when
it comes to userspace mmap'ings.  For non-tiled buffers, the original
(potentially physically discontiguous) pages are used to back the
mmap.  For tiled buffers, we need to mmap via the tiler/dmm region to
provide an unswizzled view of the buffer.  But (a) the buffer is not
necessarily pinned in TILER all the time (it can be unmapped when
there is no DMA access to the buffer), and (b) when they are they
are pinned, they not necessarily page aligned from the perspective of
the CPU.  And non-page aligned userspace buffer mapping is evil.

To solve this, we reserve one or more small regions in each of the 2d
containers when the driver is loaded to use as a "user-GART" where we
can create a second page-aligned mapping of parts of the buffer being
accessed from userspace.  Page faulting is used to evict and remap
different regions of whichever buffers are being accessed from user-
space.
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

A DRM display driver for TI OMAP platform.  Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels.  And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).

The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's.  Note that this arrangement might change slightly
when support for drm_plane overlays is added.

For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()).  In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().

See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git

Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302

Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/

History:

v5: move headers from include/drm at Greg KH's request, minor rebasing
    on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
    because "drm/gem: add functions to get/put pages" patch is not
    merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
    rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
    API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
    unneeded functions, use dma_addr_t for physical addresses, error
    handling cleanup, refactor attach/detach pages into common drm
    functions, split non-userspace-facing API into omap_priv.h, remove
    plugin API

v1: original
Signed-off-by: NRob Clark <rob@ti.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>