- 01 7月, 2006 2 次提交
-
-
由 Al Viro 提交于
Allow to tie upper bits of syscall bitmap in audit rules to kernel-defined sets of syscalls. Infrastructure, a couple of classes (with 32bit counterparts for biarch targets) and actual tie-in on i386, amd64 and ia64. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 30 6月, 2006 4 次提交
-
-
由 Adrian Bunk 提交于
skb_release_data() no longer has any users in other files. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ingo Molnar 提交于
Add ->retrigger() irq op to consolidate hw_irq_resend() implementations. (Most architectures had it defined to NOP anyway.) NOTE: ia64 needs testing. i386 and x86_64 tested. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
Consolidation: remove the irq_affinity[NR_IRQS] array and move it into the irq_desc[NR_IRQS].affinity field. [akpm@osdl.org: sparc64 build fix] Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
This patch-queue improves the generic IRQ layer to be truly generic, by adding various abstractions and features to it, without impacting existing functionality. While the queue can be best described as "fix and improve everything in the generic IRQ layer that we could think of", and thus it consists of many smaller features and lots of cleanups, the one feature that stands out most is the new 'irq chip' abstraction. The irq-chip abstraction is about describing and coding and IRQ controller driver by mapping its raw hardware capabilities [and quirks, if needed] in a straightforward way, without having to think about "IRQ flow" (level/edge/etc.) type of details. This stands in contrast with the current 'irq-type' model of genirq architectures, which 'mixes' raw hardware capabilities with 'flow' details. The patchset supports both types of irq controller designs at once, and converts i386 and x86_64 to the new irq-chip design. As a bonus side-effect of the irq-chip approach, chained interrupt controllers (master/slave PIC constructs, etc.) are now supported by design as well. The end result of this patchset intends to be simpler architecture-level code and more consolidation between architectures. We reused many bits of code and many concepts from Russell King's ARM IRQ layer, the merging of which was one of the motivations for this patchset. This patch: rename desc->handler to desc->chip. Originally i did not want to do this, because it's a big patch. But having both "desc->handler", "desc->handle_irq" and "action->handler" caused a large degree of confusion and made the code appear alot less clean than it truly is. I have also attempted a dual approach as well by introducing a desc->chip alias - but that just wasnt robust enough and broke frequently. So lets get over with this quickly. The conversion was done automatically via scripts and converts all the code in the kernel. This renaming patch is the first one amongst the patches, so that the remaining patches can stay flexible and can be merged and split up without having some big monolithic patch act as a merge barrier. [akpm@osdl.org: build fix] [akpm@osdl.org: another build fix] Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 6月, 2006 2 次提交
-
-
由 Andrew Morton 提交于
WARNING: "unset_nmi_callback" [arch/x86_64/oprofile/oprofile.ko] undefined! WARNING: "set_nmi_callback" [arch/x86_64/oprofile/oprofile.ko] undefined! Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
We recently changed x86 to handle more than 256 IRQs. Add a check in do_IRQ() just to make sure that nothing went wrong with that implementation. [chrisw@sous-sol.org: do x86_64 too] Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@muc.de> Cc: Chris Wright <chrisw@sous-sol.org> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: <Christian.Limpach@cl.cam.ac.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 6月, 2006 4 次提交
-
-
由 Siddha, Suresh B 提交于
sysfs entries 'sched_mc_power_savings' and 'sched_smt_power_savings' in /sys/devices/system/cpu/ control the MC/SMT power savings policy for the scheduler. Based on the values (1-enable, 0-disable) for these controls, sched groups cpu power will be determined for different domains. When power savings policy is enabled and under light load conditions, scheduler will minimize the physical packages/cpu cores carrying the load and thus conserving power(with a perf impact based on the workload characteristics... see OLS 2005 CMP kernel scheduler paper for more details..) Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Con Kolivas <kernel@kolivas.org> Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chandra Seetharaman 提交于
Make notifier_blocks associated with cpu_notifier as __cpuinitdata. __cpuinitdata makes sure that the data is init time only unless CONFIG_HOTPLUG_CPU is defined. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chandra Seetharaman 提交于
In 2.6.17, there was a problem with cpu_notifiers and XFS. I provided a band-aid solution to solve that problem. In the process, i undid all the changes you both were making to ensure that these notifiers were available only at init time (unless CONFIG_HOTPLUG_CPU is defined). We deferred the real fix to 2.6.18. Here is a set of patches that fixes the XFS problem cleanly and makes the cpu notifiers available only at init time (unless CONFIG_HOTPLUG_CPU is defined). If CONFIG_HOTPLUG_CPU is defined then cpu notifiers are available at run time. This patch reverts the notifier_call changes made in 2.6.17 Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rusty Russell 提交于
Remove the limit of 256 interrupt vectors by changing the value stored in orig_{e,r}ax to be the complemented interrupt vector. The orig_{e,r}ax needs to be < 0 to allow the signal code to distinguish between return from interrupt and return from syscall. With this change applied, NR_IRQS can be > 256. Xen extends the IRQ numbering space to include room for dynamically allocated virtual interrupts (in the range 256-511), which requires a more permissive interface to do_IRQ. Signed-off-by: NIan Pratt <ian.pratt@xensource.com> Signed-off-by: NChristian Limpach <Christian.Limpach@cl.cam.ac.uk> Signed-off-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 6月, 2006 28 次提交
-
-
由 Eric Sandeen 提交于
Take two, now without spurious whitespace :( Applies to git & 2.6.17-rc6 CONFIG_DEBUG_STACKOVERFLOW existed for x86_64 in 2.4, but seems to have gone AWOL in 2.6. I've pretty much just copied this over from the 2.4 code, with appropriate tweaks for the 2.6 kernel, plus a bugfix. I'd personally rather see it printed out the way other arches do it, i.e. bytes-remaining-until-overflow, rather than having to do the subtraction yourself. Also, only 128 bytes remaining seems awfully late to issue a warning. But I'll start here :) Signed-off-by: NEric Sandeen <sandeen@sgi.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Venkatesh Pallipadi 提交于
Intel now has support for Architectural Performance Monitoring Counters ( Refer to IA-32 Intel Architecture Software Developer's Manual http://www.intel.com/design/pentium4/manuals/253669.htm ). This feature is present starting from Intel Core Duo and Intel Core Solo processors. What this means is, the performance monitoring counters and some performance monitoring events are now defined in an architectural way (using cpuid). And there will be no need to check for family/model etc for these architectural events. Below is the patch to use this performance counters in nmi watchdog driver. Patch handles both i386 and x86-64 kernels. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Keith Owens 提交于
On some i386/x86_64 systems, sending an NMI IPI as a broadcast will reset the system. This seems to be a BIOS bug which affects machines where one or more cpus are not under OS control. It occurs on HT systems with a version of the OS that is not compiled without HT support. It also occurs when a system is booted with max_cpus=n where 2 <= n < cpus known to the BIOS. The fix is to always send NMI IPI as a mask instead of as a broadcast. Signed-off-by: NKeith Owens <kaos@sgi.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Siddha, Suresh B 提交于
Appended patch fixes the "APIC error on CPUX: 00(40)" observed during bootup. From SDM Vol-3A "Valid Interrupt Vectors" section: "When an illegal vector value (0-15) is written to an LVT entry and the delivery mode is Fixed, the APIC may signal an illegal vector error, with out regard to whether the mask bit is set or whether an interrupt is actually seen on input." Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Only exports for assembler files are left in x8664_ksyms.c Originally inspired by a patch from Al Viro Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Keith Owens 提交于
x86_64 and i386 behave inconsistently when sending an IPI on vector 2 (NMI_VECTOR). Make both behave the same, so IPI 2 is sent as NMI. The crash code was abusing send_IPI_allbutself() by passing a code instead of a vector, it only worked because crash knew about the internal code of send_IPI_allbutself(). Change crash to use NMI_VECTOR instead, and remove the comment about how crash was abusing the function. This patch is a pre-requisite for fixing the problem where sending an IPI as NMI would reboot some Dell Xeon systems. I cannot fix that problem while crash continus to abuse send_IPI_allbutself(). It also removes the inconsistency between i386 and x86_64 for NMI_VECTOR. That will simplify all the RAS code that needs to bring all the cpus to a clean stop, even when one or more cpus are spinning disabled. Signed-off-by: NKeith Owens <kaos@sgi.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Piotr Kaczuba 提交于
It turned out that the following change is needed when the speaker is compiled as a module. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
Defaulting to a value not evenly divisible by four makes little sense, as four values are displayed per line (and hence the rest of the line would otherwise be wasted). Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
With (significantly) more than 10 CPUs online, the column headings drifted off the positions of the column contents with growing CPU numbers. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
The APIC ID returned by hard_smp_processor_id can be beyond NR_CPUS and then overflow the x86_cpu_to_apic[] array. Add a check for overflow. If it happens then the slow loop below will catch. Bug pointed out by Doug Thompson Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rohit Seth 提交于
Getting phys_proc_id and cpu_core_id information to be printed at boot time for AMD processors. Also matching the Node related boot time information that gets printed for Intel and AMD processors for NUMA configurations. Signed-off-by: NRohit Seth <rohitseth@google.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
During some profiling I noticed that default_idle causes a lot of memory traffic. I think that is caused by the atomic operations to clear/set the polling flag in thread_info. There is actually no reason to make this atomic - only the idle thread does it to itself, other CPUs only read it. So I moved it into ti->status. Converted i386/x86-64/ia64 for now because that was the easiest way to fix ACPI which also manipulates these flags in its idle function. Cc: Nick Piggin <npiggin@novell.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Len Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
No red zone possible/needed on the alternative stack. It caused confusion. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
- Use DMA_32BIT_MASK - Use %z for size_t - 80-cols Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Cc: Jacob Shin <jacob.shin@amd.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jacob Shin 提交于
Clean up mce_amd.c for readability and remove code no longer needed. Signed-off-by: NJacob Shin <jacob.shin@amd.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jacob Shin 提交于
Add support for mce threshold registers found in future AMD family 0x10 processors. Backwards compatible with family 0xF hardware. AK: fixed build on !SMP Signed-off-by: NJacob Shin <jacob.shin@amd.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jacob Shin 提交于
Get rid of /sys/devices/system/threshold directory and move mce_amd thresholding files into the machine sysfs directory -- /sys/devices/system/machinecheck. AK: Fixed warning Signed-off-by: NJacob Shin <jacob.shin@amd.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jacob Shin 提交于
Add support for extended APIC LVT found in future AMD processors. Signed-off-by: NJacob Shin <jacob.shin@amd.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Vojtech Pavlik 提交于
Update my copyright dates in arch/x86-64/kernel/time.c Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Vojtech Pavlik 提交于
After writing the CFG register, the first value written to the T0_CMP register is the value at which next interrupt should be triggered, every value after that sets the period of the interrupt. For that reason, the code needs to write the value twice - to set both the phase and period. [AK: I had already figured it out by myself, but it's still useful to have a comment for this.] Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Vojtech Pavlik 提交于
This patch makes use of the newly added conversion constants in time.h to x86-64 time.c. The code gets significantly easier to understand. Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Vojtech Pavlik 提交于
Remove #ifdefed code to manually enable HPET on AMD8111, where the BIOS doesn't have ACPI HPET tables and doesn't enable it for us. Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Vojtech Pavlik 提交于
This patch adds the X86_FEATURE_RDTSCP #define, so that kernel code can check for the feature easily and also fixes the location of the "rdtscp" string in the cpuinfo tables. Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Vojtech Pavlik 提交于
Rename oem_force_hpet_timer to apic_is_clustered_box, to give the function a better fitting name - it really isn't at all about HPET. Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rohit Seth 提交于
Most of the fields of cpuinfo are defined in cpuinfo_x86 structure. This patch moves the phys_proc_id and cpu_core_id for each processor to cpuinfo_x86 structure as well. Signed-off-by: NRohit Seth <rohitseth@google.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jon Mason 提交于
This patch hooks Calgary into the build, the x86-64 IOMMU initialization paths, and introduces the Calgary specific bits. The implementation draws inspiration from both PPC (which has support for the same chip but requires firmware support which we don't have on x86-64) and gart. Calgary is different from gart in that it support a translation table per PHB, as opposed to the single gart aperture. Changes from previous version: * Addition of boot-time disablement for bus-level translation/isolation (e.g, enable userspace DMA for things like X) * Usage of newer IOMMU abstraction functions Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: NJon Mason <jdmason@us.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jon Mason 提交于
This patch creates a new interface for IOMMUs by adding a centralized location for IOMMU allocation (for translation tables/apertures) and IOMMU initialization. In creating these, code was moved around for abstraction, uniformity, and consiceness. Take note of the move of the iommu_setup bootarg parsing code to __setup. This is enabled by moving back the location of the aperture allocation/detection to mem init (which while ugly, was already the location of the swiotlb_init). While a slight departure from the previous patch, I belive this provides the true intention of the previous versions of the patch which changed this code. It also makes the addition of the upcoming calgary code much cleaner than previous patches. [AK: Removed one broken change. iommu_setup still has to be called early] Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: NJon Mason <jdmason@us.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-