- 11 3月, 2016 1 次提交
-
-
由 Hector Marco-Gisbert 提交于
Currently on i386 and on X86_64 when emulating X86_32 in legacy mode, only the stack and the executable are randomized but not other mmapped files (libraries, vDSO, etc.). This patch enables randomization for the libraries, vDSO and mmap requests on i386 and in X86_32 in legacy mode. By default on i386 there are 8 bits for the randomization of the libraries, vDSO and mmaps which only uses 1MB of VA. This patch preserves the original randomness, using 1MB of VA out of 3GB or 4GB. We think that 1MB out of 3GB is not a big cost for having the ASLR. The first obvious security benefit is that all objects are randomized (not only the stack and the executable) in legacy mode which highly increases the ASLR effectiveness, otherwise the attackers may use these non-randomized areas. But also sensitive setuid/setgid applications are more secure because currently, attackers can disable the randomization of these applications by setting the ulimit stack to "unlimited". This is a very old and widely known trick to disable the ASLR in i386 which has been allowed for too long. Another trick used to disable the ASLR was to set the ADDR_NO_RANDOMIZE personality flag, but fortunately this doesn't work on setuid/setgid applications because there is security checks which clear Security-relevant flags. This patch always randomizes the mmap_legacy_base address, removing the possibility to disable the ASLR by setting the stack to "unlimited". Signed-off-by: NHector Marco-Gisbert <hecmargi@upv.es> Acked-by: NIsmael Ripoll Ripoll <iripoll@upv.es> Acked-by: NKees Cook <keescook@chromium.org> Acked-by: NArjan van de Ven <arjan@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: kees Cook <keescook@chromium.org> Link: http://lkml.kernel.org/r/1457639460-5242-1-git-send-email-hecmargi@upv.esSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 05 3月, 2016 1 次提交
-
-
由 Karol Herbst 提交于
Because Linux might use bigger pages than the 4K pages to handle those mmio ioremaps, the kmmio code shouldn't rely on the pade id as it currently does. Using the memory address instead of the page id lets us look up how big the page is and what its base address is, so that we won't get a page fault within the same page twice anymore. Tested-by: NPierre Moreau <pierre.morrow@free.fr> Signed-off-by: NKarol Herbst <nouveau@karolherbst.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: linux-mm@kvack.org Cc: linux-x86_64@vger.kernel.org Cc: nouveau@lists.freedesktop.org Cc: pq@iki.fi Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/1456966991-6861-1-git-send-email-nouveau@karolherbst.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 25 2月, 2016 1 次提交
-
-
由 Jan Beulich 提交于
set_memory_nx() (and set_memory_x()) currently differ in behavior from all other set_memory_*() functions when encountering a virtual address space hole within the kernel address range: They stop processing at the hole, but nevertheless report success (making the caller believe the operation was carried out on the entire range). While observed to be a problem - triggering the CONFIG_DEBUG_WX warning - only with out of tree code, I suspect (but didn't check) that on x86-64 the CONFIG_DEBUG_PAGEALLOC logic in free_init_pages() would, when called from free_initmem(), have the same effect on the set_memory_nx() called from mark_rodata_ro(). This unexpected behavior is a result of change_page_attr_set_clr() special casing changes to only the NX bit, in that it passes "false" as the "checkalias" argument to __change_page_attr_set_clr(). Since this flag becomes the "primary" argument of both __change_page_attr() and __cpa_process_fault(), the latter would so far return success without adjusting cpa->numpages. Success to the higher level callers, however, means that whatever cpa->numpages currently holds is the count of successfully processed pages. The cases when __change_page_attr() calls __cpa_process_fault(), otoh, don't generally mean the entire range got processed (as can be seen from one of the two success return paths in __cpa_process_fault() already adjusting ->numpages). Signed-off-by: NJan Beulich <jbeulich@suse.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/56BB0AD402000078000D05BF@prv-mh.provo.novell.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 20 2月, 2016 1 次提交
-
-
由 Borislav Petkov 提交于
is_hypervisor_range() can simply check if the PGD index is within ffff800000000000 - ffff87ffffffffff which is the range reserved for a hypervisor. That range is practically an ABI, see Documentation/x86/x86_64/mm.txt. Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Under Xen, as PV guest Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1455825641-19585-1-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 14 2月, 2016 1 次提交
-
-
由 Borislav Petkov 提交于
So we want to specify the dependency on both @pcid and @addr so that the compiler doesn't reorder accesses to them *before* the TLB flush. But for that to work, we need to express this properly in the inline asm and deref the whole desc array, not the pointer to it. See clwb() for an example. This fixes the build error on 32-bit: arch/x86/include/asm/tlbflush.h: In function ‘__invpcid’: arch/x86/include/asm/tlbflush.h:26:18: error: memory input 0 is not directly addressable which gcc4.7 caught but 5.x didn't. Which is strange. :-\ Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Michael Matz <matz@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: linux-mm@kvack.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 09 2月, 2016 6 次提交
-
-
由 Andy Lutomirski 提交于
DMI cacheability is very confused on x86. dmi_early_remap() uses early_ioremap(), which uses FIXMAP_PAGE_IO, which is __PAGE_KERNEL_IO, which is __PAGE_KERNEL, which is cached. Don't ask me why this makes any sense. dmi_remap() uses ioremap(), which requests an uncached mapping. However, on non-EFI systems, the DMI data generally lives between 0xf0000 and 0x100000, which is in the legacy ISA range, which triggers a special case in the PAT code that overrides the cache mode requested by ioremap() and forces a WB mapping. On a UEFI boot, however, the DMI table can live at any physical address. On my laptop, it's around 0x77dd0000. That's nowhere near the legacy ISA range, so the ioremap() implicit uncached type is honored and we end up with a UC- mapping. UC- is a very, very slow way to read from main memory, so dmi_walk() is likely to take much longer than necessary. Given that, even on UEFI, we do early cached DMI reads, it seems safe to just ask for cached access. Switch to ioremap_cache(). I haven't tried to benchmark this, but I'd guess it saves several milliseconds of boot time. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jean Delvare <jdelvare@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Link: http://lkml.kernel.org/r/3147c38e51f439f3c8911db34c7d4ab22d854915.1453791969.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Andy Lutomirski 提交于
On my Skylake laptop, INVPCID function 2 (flush absolutely everything) takes about 376ns, whereas saving flags, twiddling CR4.PGE to flush global mappings, and restoring flags takes about 539ns. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Reviewed-by: NBorislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/ed0ef62581c0ea9c99b9bf6df726015e96d44743.1454096309.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Andy Lutomirski 提交于
This adds a chicken bit to turn off INVPCID in case something goes wrong. It's an early_param() because we do TLB flushes before we parse __setup() parameters. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Reviewed-by: NBorislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/f586317ed1bc2b87aee652267e515b90051af385.1454096309.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Andy Lutomirski 提交于
This adds helpers for each of the four currently-specified INVPCID modes. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Reviewed-by: NBorislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/8a62b23ad686888cee01da134c91409e22064db9.1454096309.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Andrey Ryabinin 提交于
After kasan_init() executed, no one is allowed to write to kasan_zero_page, so write protect it. Signed-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: NBorislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1452516679-32040-3-git-send-email-aryabinin@virtuozzo.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Andrey Ryabinin 提交于
Currently we clear kasan_zero_page before __flush_tlb_all(). This works with current implementation of native_flush_tlb[_global]() because it doesn't cause do any writes to kasan shadow memory. But any subtle change made in native_flush_tlb*() could break this. Also current code seems doesn't work for paravirt guests (lguest). Only after the TLB flush we can be sure that kasan_zero_page is not used as early shadow anymore (instrumented code will not write to it). So it should cleared it only after the TLB flush. Signed-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: NBorislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1452516679-32040-2-git-send-email-aryabinin@virtuozzo.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 08 2月, 2016 4 次提交
-
-
由 Ingo Molnar 提交于
numa_clear_kernel_node_hotplug() uses memblock_set_node() without checking for failures. memblock_set_node() is a complex function that might extend the memblock array - which extension might fail - so check for this possibility. It's not supposed to happen (because realistically if we have so little memory that this fails then we likely won't be able to boot anyway), but do the check nevertheless. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Brad Spengler <spender@grsecurity.net> Cc: Chen Tang <imtangchen@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: PaX Team <pageexec@freemail.hu> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: y14sg1 <y14sg1@comcast.net> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
So we fixed an overflow bug in numa_clear_kernel_node_hotplug(): 2b54ab3c66d4 ("x86/mm/numa: Fix memory corruption on 32-bit NUMA kernels") ... and the bug was indirectly caused by poor coding style, such as using start/end local variables unnecessarily, which lost the physaddr_t type. So make the code more readable and try to fully comment all the thinking behind the logic. No change in functionality. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Brad Spengler <spender@grsecurity.net> Cc: Chen Tang <imtangchen@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: PaX Team <pageexec@freemail.hu> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: y14sg1 <y14sg1@comcast.net> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
The following commit: a0acda91 ("acpi, numa, mem_hotplug: mark all nodes the kernel resides un-hotpluggable") Introduced numa_clear_kernel_node_hotplug(), which function is executed during early bootup, and which marks all currently reserved memblock regions as hot-memory-unswappable as well. y14sg1 <y14sg1@comcast.net> reported that when running 32-bit NUMA kernels, the grsecurity/PAX kernel patch flagged a size overflow in this function: PAX: size overflow detected in function x86_numa_init arch/x86/mm/numa.c:691 [...] ... the reason for the overflow is that memblock_clear_hotplug() takes physical addresses as arguments, while the start/end variables used by numa_clear_kernel_node_hotplug() are 'unsigned long', which is 32-bit on PAE kernels, but which has 64-bit physical addresses. So on 32-bit PAE kernels that have physical memory above the 4GB boundary, we truncate a 64-bit physical address range to 32 bits and pass it to memblock_clear_hotplug(), which at minimum prevents the original memory-hotplug bugfix from working, but might have other side effects as well. The fix is to use the proper type to handle physical addresses, phys_addr_t. Reported-by: Ny14sg1 <y14sg1@comcast.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Brad Spengler <spender@grsecurity.net> Cc: Chen Tang <imtangchen@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: PaX Team <pageexec@freemail.hu> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 05 2月, 2016 1 次提交
-
-
由 Dmitry Vyukov 提交于
thread_saved_pc() reads stack of a potentially running task. This can cause false KASAN stack-out-of-bounds reports, because the running task concurrently poisons and unpoisons own stack. The same happens in get_wchan(), and get get_wchan() was fixed by using READ_ONCE_NOCHECK(). Do the same here. Example KASAN report triggered by sysrq-t: BUG: KASAN: out-of-bounds in sched_show_task+0x306/0x3b0 at addr ffff880043c97c18 Read of size 8 by task syz-executor/23839 [...] page dumped because: kasan: bad access detected [...] Call Trace: [<ffffffff8175ea0e>] __asan_report_load8_noabort+0x3e/0x40 [<ffffffff813e7a26>] sched_show_task+0x306/0x3b0 [<ffffffff813e7bf4>] show_state_filter+0x124/0x1a0 [<ffffffff82d2ca00>] fn_show_state+0x10/0x20 [<ffffffff82d2cf98>] k_spec+0xa8/0xe0 [<ffffffff82d3354f>] kbd_event+0xb9f/0x4000 [<ffffffff843ca8a7>] input_to_handler+0x3a7/0x4b0 [<ffffffff843d1954>] input_pass_values.part.5+0x554/0x6b0 [<ffffffff843d29bc>] input_handle_event+0x2ac/0x1070 [<ffffffff843d3a47>] input_inject_event+0x237/0x280 [<ffffffff843e8c28>] evdev_write+0x478/0x680 [<ffffffff817ac653>] __vfs_write+0x113/0x480 [<ffffffff817ae0e7>] vfs_write+0x167/0x4a0 [<ffffffff817b13d1>] SyS_write+0x111/0x220 Signed-off-by: NDmitry Vyukov <dvyukov@google.com> Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: glider@google.com Cc: kasan-dev@googlegroups.com Cc: kcc@google.com Cc: linux-kernel@vger.kernel.org Cc: ryabinin.a.a@gmail.com Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 04 2月, 2016 24 次提交
-
-
由 Linus Torvalds 提交于
Merge fixes from Andrew Morton: "18 fixes" [ The 18 fixes turned into 17 commits, because one of the fixes was a fix for another patch in the series that I just folded in by editing the patch manually - hopefully correctly - Linus ] * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: fix memory leak in copy_huge_pmd() drivers/hwspinlock: fix race between radix tree insertion and lookup radix-tree: fix race in gang lookup mm/vmpressure.c: fix subtree pressure detection mm: polish virtual memory accounting mm: warn about VmData over RLIMIT_DATA Documentation: cgroup-v2: add memory.stat::sock description mm: memcontrol: drop superfluous entry in the per-memcg stats array drivers/scsi/sg.c: mark VMA as VM_IO to prevent migration proc: revert /proc/<pid>/maps [stack:TID] annotation numa: fix /proc/<pid>/numa_maps for hugetlbfs on s390 MAINTAINERS: update Seth email ocfs2/cluster: fix memory leak in o2hb_region_release lib/test-string_helpers.c: fix and improve string_get_size() tests thp: limit number of object to scan on deferred_split_scan() thp: change deferred_split_count() to return number of THP in queue thp: make split_queue per-node
-
git://git.code.sf.net/p/openipmi/linux-ipmi由 Linus Torvalds 提交于
Pull IPMI fix from Corey Minyard: "Fix a compile error on IPMI when ACPI is disabled" * tag 'for-linus-4.5-2' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: put acpi.h with the other headers
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux由 Linus Torvalds 提交于
Pull DeviceTree fixes from Rob Herring: - Fix build error with *_OF_DECLARE() when used in modules - Add missing platform maintainers for dts files in MAINTAINERS * tag 'devicetree-fixes-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: drop symbols declared by _OF_DECLARE() from modules MAINTAINERS: Add missing platform maintainers for dts files
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfix and cleanup from Trond Myklebust: "Bugfix: - pNFS: Fix for missing layoutreturn calls Cleanup: - pNFS: rename NFS_LAYOUT_RETURN_BEFORE_CLOSE for code clarity" * tag 'nfs-for-4.5-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Cleanup - rename NFS_LAYOUT_RETURN_BEFORE_CLOSE pNFS: Fix missing layoutreturn calls
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull tracing fix from Steven Rostedt: "A cleanup to the stack tracer broke stack tracing on s390. Here's a simple fix to correct that issue" * tag 'trace-v4.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/stacktrace: Show entire trace if passed in function not found
-
由 Hugh Dickins 提交于
Trinity is now hitting the WARN_ON_ONCE we added in v3.15 commit cda540ac ("mm: get_user_pages(write,force) refuse to COW in shared areas"). The warning has served its purpose, nobody was harmed by that change, so just remove the warning to generate less noise from Trinity. Which reminds me of the comment I wrongly left behind with that commit (but was spotted at the time by Kirill), which has since moved into a separate function, and become even more obscure: delete it. Reported-by: NDave Jones <davej@codemonkey.org.uk> Suggested-by: NKirill A. Shutemov <kirill@shutemov.name> Signed-off-by: NHugh Dickins <hughd@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tony Camuso 提交于
Enclosing '#include <linux/acpi.h>' within '#ifdef CONFIG_ACPI' is unnecessary, since it has its own conditional compile for CONFIG_ACPI. Commit 0fbcf4af ("ipmi: Convert the IPMI SI ACPI handling to a platform device") exposed this as a problem for platforms that do not support ACPI when it introduced a call to ACPI_PTR() macro outside of the CONFIG_ACPI conditional compile. This would have been perfectly acceptable if acpi.h were not conditionally excluded for the non-acpi platform, because the conditional compile within acpi.h defines ACPI_PTR() to return NULL when compiled for non acpi platforms. Signed-off-by: NTony Camuso <tcamuso@redhat.com> Fixed commit reference in header to conform to standard. Signed-off-by: NCorey Minyard <cminyard@mvista.com>
-
由 Matthew Wilcox 提交于
We allocate a pgtable but do not attach it to anything if the PMD is in a DAX VMA, causing it to leak. We certainly try to not free pgtables associated with the huge zero page if the zero page is in a DAX VMA, so I think this is the right solution. This needs to be properly audited. Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matthew Wilcox 提交于
of_hwspin_lock_get_id() is protected by the RCU lock, which means that insertions can occur simultaneously with the lookup. If the radix tree transitions from a height of 0, we can see a slot with the indirect_ptr bit set, which will cause us to at least read random memory, and could cause other havoc. Fix this by using the newly introduced radix_tree_iter_retry(). Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matthew Wilcox 提交于
If the indirect_ptr bit is set on a slot, that indicates we need to redo the lookup. Introduce a new function radix_tree_iter_retry() which forces the loop to retry the lookup by setting 'slot' to NULL and turning the iterator back to point at the problematic entry. This is a pretty rare problem to hit at the moment; the lookup has to race with a grow of the radix tree from a height of 0. The consequences of hitting this race are that gang lookup could return a pointer to a radix_tree_node instead of a pointer to whatever the user had inserted in the tree. Fixes: cebbd29e ("radix-tree: rewrite gang lookup using iterator") Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
When vmpressure is called for the entire subtree under pressure we mistakenly use vmpressure->scanned instead of vmpressure->tree_scanned when checking if vmpressure work is to be scheduled. This results in suppressing all vmpressure events in the legacy cgroup hierarchy. Fix it. Fixes: 8e8ae645 ("mm: memcontrol: hook up vmpressure to socket pressure") Signed-off-by: NVladimir Davydov <vdavydov@virtuozzo.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Acked-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Konstantin Khlebnikov 提交于
* add VM_STACK as alias for VM_GROWSUP/DOWN depending on architecture * always account VMAs with flag VM_STACK as stack (as it was before) * cleanup classifying helpers * update comments and documentation Signed-off-by: NKonstantin Khlebnikov <koct9i@gmail.com> Tested-by: NSudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Konstantin Khlebnikov 提交于
This patch provides a way of working around a slight regression introduced by commit 84638335 ("mm: rework virtual memory accounting"). Before that commit RLIMIT_DATA have control only over size of the brk region. But that change have caused problems with all existing versions of valgrind, because it set RLIMIT_DATA to zero. This patch fixes rlimit check (limit actually in bytes, not pages) and by default turns it into warning which prints at first VmData misuse: "mmap: top (795): VmData 516096 exceed data ulimit 512000. Will be forbidden soon." Behavior is controlled by boot param ignore_rlimit_data=y/n and by sysfs /sys/module/kernel/parameters/ignore_rlimit_data. For now it set to "y". [akpm@linux-foundation.org: tweak kernel-parameters.txt text[ Signed-off-by: NKonstantin Khlebnikov <koct9i@gmail.com> Link: http://lkml.kernel.org/r/20151228211015.GL2194@uranusReported-by: NChristian Borntraeger <borntraeger@de.ibm.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Kees Cook <keescook@google.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
MEM_CGROUP_STAT_NSTATS is just a delimiter for cgroup1 statistics, not an actual array entry. Reuse it for the first cgroup2 stat entry, like in the event array. Fixes: b2807f07 ("mm: memcontrol: add "sock" to cgroup2 memory.stat") Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kirill A. Shutemov 提交于
Reduced testcase: #include <fcntl.h> #include <unistd.h> #include <sys/mman.h> #include <numaif.h> #define SIZE 0x2000 int main() { int fd; void *p; fd = open("/dev/sg0", O_RDWR); p = mmap(NULL, SIZE, PROT_EXEC, MAP_PRIVATE | MAP_LOCKED, fd, 0); mbind(p, SIZE, 0, NULL, 0, MPOL_MF_MOVE); return 0; } We shouldn't try to migrate pages in sg VMA as we don't have a way to update Sg_scatter_hold::pages accordingly from mm core. Let's mark the VMA as VM_IO to indicate to mm core that the VMA is not migratable. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Cc: Doug Gilbert <dgilbert@interlog.com> Cc: David Rientjes <rientjes@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Shiraz Hashim <shashim@codeaurora.org> Cc: Hugh Dickins <hughd@google.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: syzkaller <syzkaller@googlegroups.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
Commit b7643757 ("procfs: mark thread stack correctly in proc/<pid>/maps") added [stack:TID] annotation to /proc/<pid>/maps. Finding the task of a stack VMA requires walking the entire thread list, turning this into quadratic behavior: a thousand threads means a thousand stacks, so the rendering of /proc/<pid>/maps needs to look at a million combinations. The cost is not in proportion to the usefulness as described in the patch. Drop the [stack:TID] annotation to make /proc/<pid>/maps (and /proc/<pid>/numa_maps) usable again for higher thread counts. The [stack] annotation inside /proc/<pid>/task/<tid>/maps is retained, as identifying the stack VMA there is an O(1) operation. Siddesh said: "The end users needed a way to identify thread stacks programmatically and there wasn't a way to do that. I'm afraid I no longer remember (or have access to the resources that would aid my memory since I changed employers) the details of their requirement. However, I did do this on my own time because I thought it was an interesting project for me and nobody really gave any feedback then as to its utility, so as far as I am concerned you could roll back the main thread maps information since the information is available in the thread-specific files" Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com> Cc: Shaohua Li <shli@fb.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Holzheu 提交于
When working with hugetlbfs ptes (which are actually pmds) is not valid to directly use pte functions like pte_present() because the hardware bit layout of pmds and ptes can be different. This is the case on s390. Therefore we have to convert the hugetlbfs ptes first into a valid pte encoding with huge_ptep_get(). Currently the /proc/<pid>/numa_maps code uses hugetlbfs ptes without huge_ptep_get(). On s390 this leads to the following two problems: 1) The pte_present() function returns false (instead of true) for PROT_NONE hugetlb ptes. Therefore PROT_NONE vmas are missing completely in the "numa_maps" output. 2) The pte_dirty() function always returns false for all hugetlb ptes. Therefore these pages are reported as "mapped=xxx" instead of "dirty=xxx". Therefore use huge_ptep_get() to correctly convert the hugetlb ptes. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Cc: <stable@vger.kernel.org> [4.3+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Seth Jennings 提交于
Update/unify my contact info. The old email address will no longer work soon. Signed-off-by: NSeth Jennings <sjenning@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joseph Qi 提交于
o2hb_region_release currently doesn't free o2hb_debug_buf hr_db_elapsed_time and hr_db_pinned malloced in o2hb_debug_create. Also we should call debugfs_remove before freeing its data, to prevent the risk accessing debugfs rightly after its data has been freed. Signed-off-by: NJoseph Qi <joseph.qi@huawei.com> Reviewed-by: NJiufei Xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vitaly Kuznetsov 提交于
Recently added commit 564b026f ("string_helpers: fix precision loss for some inputs") fixed precision issues for string_get_size() and broke tests. Fix and improve them: test both STRING_UNITS_2 and STRING_UNITS_10 at a time, better failure reporting, test small an huge values. Fixes: 564b026f ("string_helpers: fix precision loss for some inputs") Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: James Bottomley <JBottomley@Odin.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kirill A. Shutemov 提交于
If we have a lot of pages in queue to be split, deferred_split_scan() can spend unreasonable amount of time under spinlock with disabled interrupts. Let's cap number of pages to split on scan by sc->nr_to_scan. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: NAndrea Arcangeli <aarcange@redhat.com> Reviewed-by: NAndrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kirill A. Shutemov 提交于
I've got meaning of shrinker::count_objects() wrong: it should return number of potentially freeable objects, which is not necessary correlate with freeable memory. Returning 256 per THP in queue is not reasonable: shrinker::scan_objects() never called with nr_to_scan > 128 in my setup. Let's return 1 per THP and correct scan_object accordingly. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: NAndrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kirill A. Shutemov 提交于
Andrea Arcangeli suggested to make split queue per-node to improve scalability. Let's do it. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Suggested-by: NAndrea Arcangeli <aarcange@redhat.com> Reviewed-by: NAndrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-