There is no point having the NET dependency on the select target, as it
forces all users to depend on NET to tell they support BPF_JIT.  Move
the config option to the bottom of the file - this could be a nice place
also for future "selectable" config symbols.

Fix up all users to drop the dependency on NET now that it is not
required to supress warnings for non-NET builds.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NDavid Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The following tightens the padding check from commit
c1412fce :

* Take into account combinations of consecutive Pad1 and PadN.

* Catch the corner case of when only padding is present in the
  header, when the extention header length is 0 (i.e., 8 bytes).
  In this case, the header would have exactly 6 bytes of padding:

+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
:  Next Header  : Hdr Ext Len=0 :                               :
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+                               +
:                        Padding (Pad1 or PadN)                 :
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Signed-off-by: NEldad Zack <eldad@fogrefinery.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace simple_strtoul with kstrtoul in three similar occurrences, all setup
handlers:
* route.c: set_rhash_entries
* tcp.c: set_thash_entries
* udp.c: set_uhash_entries

Also check if the conversion failed.
Signed-off-by: NEldad Zack <eldad@fogrefinery.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The __setup macro should follow the corresponding setup handler.
Signed-off-by: NEldad Zack <eldad@fogrefinery.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip6_frag_reasm() can use skb_try_coalesce() to build optimized skb,
reducing memory used by them (truesize), and reducing number of cache
line misses and overhead for the consumer.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip_frag_reasm() can use skb_try_coalesce() to build optimized skb,
reducing memory used by them (truesize), and reducing number of cache
line misses and overhead for the consumer.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move tcp_try_coalesce() protocol independent part to
skb_try_coalesce().

skb_try_coalesce() can be used in IPv4 defrag and IPv6 reassembly,
to build optimized skbs (less sk_buff, and possibly less 'headers')

skb_try_coalesce() is zero copy, unless the copy can fit in destination
header (its a rare case)

kfree_skb_partial() is also moved to net/core/skbuff.c and exported,
because IPv6 will need it in patch (ipv6: use skb coalescing in
reassembly).
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixed space issues relating to operators found by
checkpatch.pl tool in net/ipv6/udp.c
Signed-off-by: NJeffrin Jose <ahiliation@yahoo.co.in>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixed a trailing white space issue found by
checkpatch.pl tool in net/ipv6/udp.c
Signed-off-by: NJeffrin Jose <ahiliation@yahoo.co.in>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the allfrag feature has been set on a host route (due to an ICMPv6
Packet Too Big received indicating a MTU of less than 1280), we hit a
very slow behavior in TCP stack, because all big packets are dropped and
only a retransmit timer is able to push one MSS frame every 200 ms.

One way to handle this is to disable GSO on the socket the first time a
super packet is dropped. Adding a specific dst_allfrag() in the fast
path is probably overkill since the dst_allfrag() case almost never
happen.

Result on netperf TCP_STREAM, one flow :

Before : 60 kbit/sec
After : 1.6 Gbit/sec
Reported-by: NTore Anderson <tore@fud.no>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Tested-by: NTore Anderson <tore@fud.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No need to export napi_frags_skb()
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Mostly bool conversions, some inline removals and const additions.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We already unconditionally dereference 'sk' via lock_sock(sk) earlier
in this function, and our caller (sock_do_ioctl()) makes takes similar
liberties.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Quoting Tore Anderson from :

If the allfrag feature has been set on a host route (due to an ICMPv6
Packet Too Big received indicating a MTU of less than 1280),
TCP SYN/ACK packets to that destination appears to get an incorrect
TCP checksum. This in turn means they are thrown away as invalid.

In the case of an IPv4 client behind a link with a MTU of less than
1260, accessing an IPv6 server through a stateless translator,
this means that the client can only download a single large file
from the server, because once it is in the server's routing cache
with the allfrag feature set, new TCP connections can no longer
be established.

</endquote>

It appears ip6_fragment() doesn't handle CHECKSUM_PARTIAL properly.

As network drivers are not prepared to fetch correct transport header, a
safe fix is to call skb_checksum_help() before fragmenting packet.
Reported-by: NTore Anderson <tore@fud.no>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Tested-by: NTore Anderson <tore@fud.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit c57b5468 (pktgen: fix crash at module unload) did a very poor
job with list primitives.

1) list_splice() arguments were in the wrong order

2) list_splice(list, head) has undefined behavior if head is not
initialized.

3) We should use the list_splice_init() variant to clear pktgen_threads
list.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

csummode variable is always CHECKSUM_NONE in ip6_append_data()
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix two issues introduced in commit a1c7fff7
( net: netdev_alloc_skb() use build_skb() )

- Must be IRQ safe (non NAPI drivers can use it)
- Must not leak the frag if build_skb() fails to allocate sk_buff

This patch introduces netdev_alloc_frag() for drivers willing to
use build_skb() instead of __netdev_alloc_skb() variants.

Factorize code so that :
__dev_alloc_skb() is a wrapper around __netdev_alloc_skb(), and
dev_alloc_skb() a wrapper around netdev_alloc_skb()

Use __GFP_COLD flag.

Almost all network drivers now benefit from skb->head_frag
infrastructure.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ipv6_opt_accepted() returns a bool, and can use const pointers

ipv6_addr_equal(), ipv6_addr_any(), ipv6_addr_loopback(),
ipv6_addr_orchid() return a bool.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- match() method returns a boolean
- return (A && B && C && D) -> return A && B && C && D
- fix indentation
Signed-off-by: NEric Dumazet <edumazet@google.com>

More spring cleaning!

The ancient Econet protocol should go. Most of the bug fixes in recent
years have been fixing security vulnerabilities. The hardware hasn't
been made since the 90s, it is only interesting as an archeological curiosity.

For the truly curious, or insomniac, go read up on it.
  http://en.wikipedia.org/wiki/EconetSigned-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enable dynamic debugging and remove a bunch of #ifdef/#endifs.

Add a lapb_dbg(level, fmt, ...) macro and replace the
printk(KERN_DEBUG uses.
Add pr_fmt and remove embedded prefixes.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since recent changes on TCP splicing (starting with commits 2f533844
"tcp: allow splice() to build full TSO packets" and 35f9c09f "tcp:
tcp_sendpages() should call tcp_push() once"), I started seeing
massive stalls when forwarding traffic between two sockets using
splice() when pipe buffers were larger than socket buffers.

Latest changes (net: netdev_alloc_skb() use build_skb()) made the
problem even more apparent.

The reason seems to be that if do_tcp_sendpages() fails on out of memory
condition without being able to send at least one byte, tcp_push() is not
called and the buffers cannot be flushed.

After applying the attached patch, I cannot reproduce the stalls at all
and the data rate it perfectly stable and steady under any condition
which previously caused the problem to be permanent.

The issue seems to have been there since before the kernel migrated to
git, which makes me think that the stalls I occasionally experienced
with tux during stress-tests years ago were probably related to the
same issue.

This issue was first encountered on 3.0.31 and 3.2.17, so please backport
to -stable.
Signed-off-by: NWilly Tarreau <w@1wt.eu>
Acked-by: NEric Dumazet <edumazet@google.com>
Cc: <stable@vger.kernel.org>

When I first wrote drop monitor I wrote it to just build monolithically.  There
is no reason it can't be built modularly as well, so lets give it that
flexibiity.

I've tested this by building it as both a module and monolithically, and it
seems to work quite well

Change notes:

v2)
* fixed for_each_present_cpu loops to be more correct as per Eric D.
* Converted exit path failures to BUG_ON as per Ben H.

v3)
* Converted del_timer to del_timer_sync to close race noted by Ben H.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
Reviewed-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

netdev_alloc_skb() is used by networks driver in their RX path to
allocate an skb to receive an incoming frame.

With recent skb->head_frag infrastructure, it makes sense to change
netdev_alloc_skb() to use build_skb() and a frag allocator.

This permits a zero copy splice(socket->pipe), and better GRO or TCP
coalescing.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The padding destination or hop-by-hop option is called Pad1 and not Pad0.

See RFC2460 (4.2) or the IANA ipv6-parameters registry:
http://www.iana.org/assignments/ipv6-parameters/ipv6-parameters.xmlSigned-off-by: NEldad Zack <eldad@fogrefinery.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bool conversions where possible.

__inline__ -> inline

space cleanups
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the current logging style.

This enables use of dynamic debugging as well.

Convert printk(KERN_<LEVEL> to pr_<level>.
Add pr_fmt. Remove embedded prefixes, use
%s, __func__ instead.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Why use several macros when one will do?

Convert the multiple ND_PRINTKx macros to a single
ND_PRINTK macro.  Use the new net_<level>_ratelimited
mechanism too.

Add pr_fmt with "ICMPv6: " as prefix.
Remove embedded ICMPv6 prefixes from messages.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert printk(KERN_DEBUG to pr_debug which can
enable dynamic debugging.

Remove embedded prefixes from the conversions as
pr_fmt adds them.

Align arguments.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bool/const conversions where possible

__inline__ -> inline

space cleanups
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use more current logging styles.

Add pr_fmt to prefix output appropriately.
Convert printks to pr_<level>.
Convert PRINTK macros to new l2tp_<level> macros.
Neaten some <foo>_refcount debugging macros.
Use print_hex_dump_bytes instead of hand-coded loops.
Coalesce formats and align arguments.

Some KERN_DEBUG output is not now emitted unless
dynamic_debugging is enabled.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ctnetlink uses the aliases that are created by MODULE_ALIAS_NFCT_HELPER
to auto-load the module based on the helper name. Thus, we have to use
RAS, Q.931 and H.245, not H.323.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

nf_conntrack_l4proto.h is included twice.
Signed-off-by: NEldad Zack <eldad@fogrefinery.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Large timeout parameters could result wrong timeout values due to
an overflow at msec to jiffies conversion (reported by Andreas Herz)

[ This patch was mangled by Pablo Neira Ayuso since David Laight and
  Eric Dumazet noticed that we were using hardcoded 1000 instead of
  MSEC_PER_SEC to calculate the timeout ]
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Extend log message if packets are ignored to include the TCP state, ie.
replace:

[ 3968.070196] nf_ct_tcp: invalid packet ignored IN= OUT= SRC=...

by:

[ 3968.070196] nf_ct_tcp: invalid packet ignored in state ESTABLISHED IN= OUT= SRC=...

This information is useful to know in what state we were while ignoring the
packet.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Acked-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>

Use:

((u64)(HASH_VAL * HASH_SIZE)) >> 32

as suggested by David S. Miller.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

There is a typo in the error checking and "&&" was used instead of "||".
If skb_header_pointer() returns NULL then it leads to a NULL
dereference.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NHans Schillstrom <hans.schillstrom@ericsson.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

David Miller says:
     The canonical way to validate if the set bits are in a valid
     range is to have a "_ALL" macro, and test:
     if (val & ~XT_HASHLIMIT_ALL)
         goto err;"

make it so.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The hash size must fit both into u32 (jhash) and the max value of
size_t. The missing checking could lead to kernel crash, bug reported
by Seblu.
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- sock_flag() accepts a const pointer

- sock_flag() returns a boolean
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>