- 10 3月, 2015 15 次提交
-
-
由 Petri Gynther 提交于
1. Add struct bcmgenet_rx_ring to hold all necessary information for a single Rx queue. 2. Add bcmgenet_init_rx_queues() to initialize all Rx queues. 3. Modify bcmgenet_init_rx_ring() to initialize a single Rx queue. 4. Modify Rx interrupt path code to use per-queue data. 5. Modify bcmgenet_rx_refill() to use RxCB->bd_addr. Signed-off-by: NPetri Gynther <pgynther@google.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
We remove Allan Stephens, who has moved on to other tasks, from the TIPC maintainers list. He is replaced by Ying Xue, who has been doing the maintenance on behalf of WindRiver since almost three years. Acked-by: NYing Xue <ying.xue@windriver.com> Acked-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
After my change to neigh_hh_init to obtain the protocol from the neigh_table there are no more users of protocol in struct dst_ops. Remove the protocol field from dst_ops and all of it's initializers. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next由 David S. Miller 提交于
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-03-09 This series contains updates to i40e and i40evf. Greg cleans up some "hello world" strings which were left around from early development. Shannon modifies the drive to make sure the sizeof() calls are taking the size of the actual struct that we care about. Also updates the NVMUpdate read/write so that it is less noisy when logging. This was because the NVMUpdate tool does not necessarily know the ReadOnly map of the current NVM image, and must try reading and writing words that may be protected. This generates an error out of the Firmware request that the driver logs. Unfortunately, this ended up spitting out hundreds of bogus read/write error messages. If a user wants the noisy logging, the change can be overridden by enabling the NVM update debugging. Mitch fixes a possible deadlock issue where if a reset occurred when the netdev is closed, the reset task will hang in napi_disable. Added ethtool RSS support as suggested by Ben Hutchings. Jesse fixes a bug introduced in the force writeback code, where the interrupt rate was set to 0 (maximum) by accident. The driver must correctly set the NOITR fields to avoid IT update as a side effect of triggering the software interrupt. I provided a simple cleanup to make the use of PF/VF consistent, which was reported by Joe Perches. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree. Basically, improvements for the packet rejection infrastructure, deprecation of CLUSTERIP, cleanups for nf_tables and some untangling for br_netfilter. More specifically they are: 1) Send packet to reset flow if checksum is valid, from Florian Westphal. 2) Fix nf_tables reject bridge from the input chain, also from Florian. 3) Deprecate the CLUSTERIP target, the cluster match supersedes it in functionality and it's known to have problems. 4) A couple of cleanups for nf_tables rule tracing infrastructure, from Patrick McHardy. 5) Another cleanup to place transaction declarations at the bottom of nf_tables.h, also from Patrick. 6) Consolidate Kconfig dependencies wrt. NF_TABLES. 7) Limit table names to 32 bytes in nf_tables. 8) mac header copying in bridge netfilter is already required when calling ip_fragment(), from Florian Westphal. 9) move nf_bridge_update_protocol() to br_netfilter.c, also from Florian. 10) Small refactor in br_netfilter in the transmission path, again from Florian. 11) Move br_nf_pre_routing_finish_bridge_slow() to br_netfilter. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Erik Hugne 提交于
Commit 9bbb4ecc ("tipc: standardize recvmsg routine") changed the sleep/wakeup behaviour for sockets entering recv() or accept(). In this process the order of reporting -EAGAIN/-EINTR was reversed. This caused problems with wrong errno being reported back if the timeout expires. The same problem happens if the socket is nonblocking and recv()/accept() is called when the process have pending signals. If there is no pending data read or connections to accept, -EINTR will be returned instead of -EAGAIN. Signed-off-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Reported-by László Benedek <laszlo.benedek@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'iwlwifi-next-for-kalle-2015-03-07' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next fix compilation when DEBUGFS isn't set Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NScott Feldman <sfeldma@gmail.com> Acked-by: NAndy Gospodarek <gospo@cumulusnetworks.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Erik Hugne 提交于
Commit d0f91938 ("tipc: add ip/udp media type") introduced some new sparse warnings. Clean them up. Signed-off-by: NErik Hugne <erik.hugne@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
Kernel automatically creates a tp for each (kind, protocol, priority) tuple, which has handle 0, when we add a new filter, but it still is left there after we remove our own, unless we don't specify the handle (literally means all the filters under the tuple). For example this one is left: # tc filter show dev eth0 filter parent 8001: protocol arp pref 49152 basic The user-space is hard to clean up these for kernel because filters like u32 are organized in a complex way. So kernel is responsible to remove it after all filters are gone. Each type of filter has its own way to store the filters, so each type has to provide its way to check if all filters are gone. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NCong Wang <cwang@twopensource.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim<jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitch A Williams 提交于
Add support for setting the RSS hash table and hash key through ethtool. This patch incorporates suggestions from Ben Hutchings <ben.hutchings@codethink.co.uk>. Reported-by: NBen Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Catherine Sullivan 提交于
Bump PF version to 1.2.37 and VF version to 1.2.25 Change-ID: I0287a750408250dc055c03e1f744fd5f0caefd68 Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NJim Young <james.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Print the LAN, SAN, and Port MACs for the VSI if debugfs command dump VSI is used on the PF's VSI. Example output: [260221.871244] i40e 0000:04:00.0: MAC address: 68:05:ca:26:15:e0 SAN MAC: 00:00:00:00:02:00 Port MAC: 68:05:ca:26:15:e3 Change-ID: I0b393113dfb5ee7ff4f9e5227e4177885f0cc15e Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Pablo Neira Ayuso 提交于
Only one caller, there is no need to keep this in a header. Move it to br_netfilter.c where this belongs to. Based on patch from Florian Westphal. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 09 3月, 2015 20 次提交
-
-
由 Florian Westphal 提交于
simpilifies followup patch that re-works brnf ip_fragment handling. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Florian Westphal 提交于
no need to keep it in a header file. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Florian Westphal 提交于
The mac header only has to be copied back into the skb for fragments generated by ip_fragment(), which only happens for bridge forwarded packets with nf-call-iptables=1 && active nf_defrag. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Jeff Kirsher 提交于
Joe Perches pointed out that we were inconsistent in the use of PF vs pf or VF vs vf in our driver code. Since acronyms are usually capitalized to denote that it is an acronym, changed all references to be consistent throughout the code. Reported-by: NJoe Perches <joe@perches.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
The NVMUpdate tool doesn't necessarily know the ReadOnly map of the current NVM image, and must try reading and writing words that may be protected. This generates an error out of the Firmware request that the driver logs. Unfortunately, this ends up spitting out hundreds of bogus read and write error message that looks rather messy. This patch checks the error type and under normal conditions will not print the typical read and write errors during NVMUpdate. This can be overridden by enabling the NVM update debugging. This results in a much less messy log file, and likely many fewer customer support questions. Change-ID: Id4ff2e9048c523b0ff503aa5ab181b025ec948ea Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
Fix a bug introduced in the force writeback code, where the interrupt rate was set to 0 (maximum) by accident. The driver must correctly set the NOITR fields to avoid ITR update as a side effect of triggering the software interrupt. Change-ID: I290851ae04ef3811c43aab5ee33242029f26c1a3 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
If a reset occurs when the netdev is closed, the reset task will hang in napi_disable, causing deadlocks and general grumpiness. Check to make sure the device is actually running before stopping everything. This allows the reset task to complete and have a real good time. Change-ID: Iaaea84acbcb9b3810c216b14c3326e4287b75b58 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Make sure the sizeof() calls are taking the size of the actual struct that we care about. By using the pointer variable, we'll always get the right struct size, even if the variable type changes sometime in the future. Change-ID: Id5858f883cf42447365ea3733080d7714f975bce Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
While using the Linux "strings" command I found these two strings in the driver. There's no need for them and they're kinda silly. Change-ID: I4e19b02983d48b631e9a9979f49790492845f221 Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Boris BREZILLON 提交于
Add missing "cdns,at91sam9260-macb", "atmel,sama5d3-gem" and "atmel,sama5d4-gem" compatible strings. Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
To test a checkpatch spelling patch, I ran codespell against drivers/net/ethernet/. $ git ls-files drivers/net/ethernet/ | \ while read file ; do \ codespell -w $file; \ done I removed a false positive in e1000_hw.h Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dinh Nguyen 提交于
Not having a reset control line to the ethernet controller should not be a hard failure. Instead, add support for deferred probing and just print out a debug statement. Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@opensource.altera.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Eric W. Biederman says: ==================== mpls: Minor fixes and cleanups This is a bunch of small changes that have come out of the discussions of the mpls code and the automated tests that people run against things. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
Remove a little bit of unnecessary work when transmitting a packet with neigh_packet_xmit. Use the neighbour table index not the address family as a parameter. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
Fix the OPENVSWITCH Kconfig option and old Kconfigs by having OPENVSWITCH select both NET_MPLS_GSO and MPLSO. A Kbuild test robot reported that when NET_MPLS_GSO is selected by OPENVSWITCH the generated .config is broken because MPLS is not selected. Cc: Simon Horman <horms@verge.net.au> Fixes: cec9166c mpls: Refactor how the mpls module is built Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Reviewed-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
According to RFC3032 section 2.4.2 packets with an outgoing ttl of 0 MUST NOT be forwarded. According to section 2.4.1 an outgoing TTL of 0 comes from an incomming TTL <= 1. Therefore any packets that is received with a ttl <= 1 should not have it's ttl decremented and forwarded. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
Sparse was generating a lot of warnings mostly from missing annotations in the code. Add missing annotations and in a few cases tweak the code for performance by moving work before loops. This also fixes a problematic ommision of rcu_assign_pointer and rcu_dereference. Hopefully with complete rcu annotations any new rcu errors will stick out like a sore thumb. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
*Blink* I got the argument order wrong to kzalloc and the code was working properly when tested. *Blink* Fix that. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Remove reference to obsolete ifconfig command. MTU can be changed with ip command instead. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 3月, 2015 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next由 David S. Miller 提交于
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-03-07 This series contains updates to i40e and i40evf only. Most notably, Greg provides the patch to remove the dreaded configfs changes in the driver. Shannon cleans up a sparse warning by simply straighting out the code so it is less convoluted. Fixes an issue where the vector allocation was trying too hard to save vectors for VMDq, to the point of not giving the PF enough when in a tight situation, such as an NPAR partition. Changed the driver to make sure that the PF will get all the queues and vectors it wants to fill out its destiny. Cleans up reporting to only print the port and VEB stats if it is the first partition of a multiplexed port. Catherine cleans up some duplicated code by simply removing the duplicate code. Kamil cleans up the driver by removing an un-needed endian conversion because it is already done by a register read function. Jesse fixes a variable width of a datatype, where a u16 should have been a u32. Also cleans up debug_read_register() to resolve some sparse warnings. Updates the driver to use prefetch() to get the next Tx descriptor, like in ixgbe, to improve performance. Akeem moves around code to enable/disable loopback so that other non-SRIOV supported driver functions can take advantage of the changes. Anjali cleans up the logging for adding/deleting FD-SB filters, since ethtool shows all the filters on an interface. Updates the driver to use l4_tunnel type generically to keep code flow simple. Simplifies the RSS code since the driver initializes the rss_size_max in sw_init. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guenter Roeck 提交于
Enable EEE support for MV88E6352. Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guenter Roeck 提交于
EEE configuration is similar for the various MV88E6xxx chips. Add generic support for it. Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petri Gynther 提交于
In preparation for supporting multiple Rx queues: 1. Move the initialization of priv->num_rx_bds, priv->rx_bds, and priv->rx_cbs from bcmgenet_init_rx_ring() to bcmgenet_init_dma() since they are not specific to a single Rx queue. Mimics the Tx init model where priv->num_tx_bds, priv->tx_bds, and priv->tx_cbs are initialized in bcmgenet_init_dma(). 2. Program DMA_MBUF_DONE_THRESH = 1 so that future Rx queues Q0-Q15 will get per-packet Rx interrupt. 3. Group DMA_START_ADDR, RDMA_READ_PTR, RDMA_WRITE_PTR, and DMA_END_ADDR initialization together. Mimics the Tx init model. 4. There is 1-to-1 mapping between RxCBs and RxBDs. Precalculate RxCB->bd_addr so that it can be used in the future. Signed-off-by: NPetri Gynther <pgynther@google.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge branch 'macb-next' Boris Brezillon says: ==================== net/macb: merge at91_ether driver into macb driver The rm9200 boards use the dedicated at91_ether driver instead of the regular macb driver. Both the macb and at91_ether drivers can be compiled as separated modules. Since the at91_ether driver uses code from the macb driver, at91_ether.ko depends on macb.ko. However the macb.ko module always fails to load on rm9200 boards: the macb_probe() function expects a hclk clock which doesn't exist on rm9200. Then the at91_ether.ko can't be loaded in turn due to unresolved dependencies. This series of patches fix this issue by merging at91_ether into macb. Patch 1 is fixing a problem that might happen when enabling ARM multi-platform suppot. Changes since v3: - move "net: macb: remove #if defined(CONFIG_ARCH_AT91) sections" patch into this series to avoid dependency on other patch series. Changes since v2: - rebase after changed brought by commit "net: macb: remove #if defined(CONFIG_ARCH_AT91) sections" Changes since v1: - rework probe functions to share common probing logic ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-