This adds a new field in ext4_group_info to cache the largest available
block range in a block group; and don't load the buddy pages until *after*
we've done a sanity check on the block group.

With large allocation requests (e.g., fallocate(), 8MiB) and relatively full
partitions, it's easy to have no block groups with a block extent large
enough to satisfy the input request length.  This currently causes the loop
during cr == 0 in ext4_mb_regular_allocator() to load the buddy bitmap pages
for EVERY block group.  That can be a lot of pages.  The patch below allows
us to call ext4_mb_good_group() BEFORE we load the buddy pages (although we
have check again after we lock the block group).

Addresses-Google-Bug: #2578108
Addresses-Google-Bug: #2704453
Signed-off-by: NCurt Wohlgemuth <curtw@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Currently using posix_fallocate one can bypass an RLIMIT_FSIZE limit
and create a file larger than the limit. Add a check for that.
Signed-off-by: NNikanth Karthikesan <knikanth@suse.de>
Signed-off-by: NAmit Arora <aarora@in.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Addresses-Google-Bug: #2562325
Signed-off-by: NCurt Wohlgemuth <curtw@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This adds a "re-mounted" message to ext4_remount(), and both it and
the mount message in ext4_fill_super() now have the original mount
options data string.
Signed-off-by: NCurt Wohlgemuth <curtw@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Because we can badly over-reserve metadata when we
calculate worst-case, it complicates things for quota, since
we must reserve and then claim later, retry on EDQUOT, etc.
Quota is also a generally smaller pool than fs free blocks,
so this over-reservation hurts more, and more often.

I'm of the opinion that it's not the worst thing to allow
metadata to push a user slightly over quota.  This simplifies
the code and avoids the false quota rejections that result
from worst-case speculation.

This patch stops the speculative quota-charging for
worst-case metadata requirements, and just charges quota
when the blocks are allocated at writeout.  It also is
able to remove the try-again loop on EDQUOT.

This patch has been tested indirectly by running the xfstests
suite with a hack to mount & enable quota prior to the test.

I also did a more specific test of fragmenting freespace
and then doing a large delalloc write under quota; quota
stopped me at the right amount of file IO, and then the
writeout generated enough metadata (due to the fragmentation)
that it put me slightly over quota, as expected.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Currently block/inode/dir counters initialized before journal was
recovered. In fact after journal recovery this info will probably
change. And freeblocks it critical for correct delalloc mode
accounting.

https://bugzilla.kernel.org/show_bug.cgi?id=15768Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

- Reorganize locking scheme to batch two atomic operation in to one.
  This also allow us to state what healthy group must obey following rule
  ext4_free_inodes_count(sb, gdp) == ext4_count_free(inode_bitmap, NUM);
- Fix possible undefined pointer dereference.
- Even if group descriptor stats aren't accessible we have to update
  inode bitmaps.
- Move non-group members update out of group_lock.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The extents code will sometimes zero out blocks and mark them as
initialized instead of splitting an extent into several smaller ones.
This optimization however, causes problems if the extent is beyond
i_size because fsck will complain if there are uninitialized blocks
after i_size as this can not be distinguished from an inode that has
an incorrect i_size field.

https://bugzilla.kernel.org/show_bug.cgi?id=15742Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

There was a bug reported on RHEL5 that a 10G dd on a 12G box
had a very, very slow sync after that.

At issue was the loop in write_cache_pages scanning all the way
to the end of the 10G file, even though the subsequent call
to mpage_da_submit_io would only actually write a smallish amt; then
we went back to the write_cache_pages loop ... wasting tons of time
in calling __mpage_da_writepage for thousands of pages we would
just revisit (many times) later.

Upstream it's not such a big issue for sys_sync because we get
to the loop with a much smaller nr_to_write, which limits the loop.

However, talking with Aneesh he realized that fsync upstream still
gets here with a very large nr_to_write and we face the same problem.

This patch makes mpage_add_bh_to_extent stop the loop after we've
accumulated 2048 pages, by setting mpd->io_done = 1; which ultimately
causes the write_cache_pages loop to break.

Repeating the test with a dirty_ratio of 80 (to leave something for
fsync to do), I don't see huge IO performance gains, but the reduction
in cpu usage is striking: 80% usage with stock, and 2% with the
below patch.  Instrumenting the loop in write_cache_pages clearly
shows that we are wasting time here.

Eventually we need to change mpage_da_map_pages() also submit its I/O
to the block layer, subsuming mpage_da_submit_io(), and then change it
call ext4_get_blocks() multiple times.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Turn off issuance of discard requests if the device does
not support it - similar to the action we take for barriers.
This will save a little computation time if a non-discardable
device is mounted with -o discard, and also makes it obvious
that it's not doing what was asked at mount time ...
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

ext4_freeze() used jbd2_journal_lock_updates() which takes
the j_barrier mutex, and then returns to userspace.  The
kernel does not like this:

================================================
[ BUG: lock held when returning to user space! ]
------------------------------------------------
lvcreate/1075 is leaving the kernel with locks still held!
1 lock held by lvcreate/1075:
 #0:  (&journal->j_barrier){+.+...}, at: [<ffffffff811c6214>]
jbd2_journal_lock_updates+0xe1/0xf0

Use vfs_check_frozen() added to ext4_journal_start_sb() and
ext4_force_commit() instead.

Addresses-Red-Hat-Bugzilla: #568503
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

generic setattr implementation is no longer responsible for
quota transfer so synlinks must be handled via ext4_setattr.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

If groups_per_flex < 2, sbi->s_flex_groups[] doesn't get filled out,
and every other access to this first tests s_log_groups_per_flex;
same thing needs to happen in resize or we'll wander off into
a null pointer when doing an online resize of the file system.

Thanks to Christoph Biedl, who came up with the trivial testcase:

# truncate --size 128M fsfile
# mkfs.ext3 -F fsfile
# tune2fs -O extents,uninit_bg,dir_index,flex_bg,huge_file,dir_nlink,extra_isize fsfile
# e2fsck -yDf -C0 fsfile
# truncate --size 132M fsfile
# losetup /dev/loop0 fsfile
# mount /dev/loop0 mnt
# resize2fs -p /dev/loop0

	https://bugzilla.kernel.org/show_bug.cgi?id=13549Reported-by: NAlessandro Polverini <alex@nibbles.it>
Test-case-by: NChristoph Biedl  <bugzilla.kernel.bpeb@manchmal.in-ulm.de>
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

allocated_meta_data is already included in 'used' variable.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

I have an x86_64 kernel with i386 userspace. e4defrag fails on the
EXT4_IOC_MOVE_EXT ioctl because it is not wired up for the compat
case. It seems that struct move_extent is compat save, only types
with fixed widths are used:
{
        __u32 reserved;         /* should be zero */
        __u32 donor_fd;         /* donor file descriptor */
        __u64 orig_start;       /* logical start offset in block for orig */
        __u64 donor_start;      /* logical start offset in block for donor */
        __u64 len;              /* block length to be moved */
        __u64 moved_len;        /* moved block length */
};

Lets just wire up EXT4_IOC_MOVE_EXT for the compat case.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: NEric Sandeen <sandeen@redhat.com>
CC: Akira Fujita <a-fujita@rs.jp.nec.com> 

This function cleans up after ext4_mb_load_buddy(), so the renaming
makes the code clearer.
Signed-off-by: NJing Zhang <zj.barak@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: NJing Zhang <zj.barak@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

When EIO occurs after bio is submitted, there is no memory free
operation for bio, which results in memory leakage. And there is also
no check against bio_alloc() for bio.
Acked-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: NJing Zhang <zj.barak@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Making sure ee_block is initialized to zero to prevent gcc from
kvetching.  It's harmless (although it's not obvious that it's
harmless) from code inspection:

fs/ext4/move_extent.c:478: warning: 'start_ext.ee_block' may be used
uninitialized in this function

Thanks to Stefan Richter for first bringing this to the attention of
linux-ext4@vger.kernel.org.
Signed-off-by: LiuQi <lingjiujianke@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>

Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Otherwise, we can end up having data corruption because the blocks
could get reused and then discarded!

https://bugzilla.kernel.org/show_bug.cgi?id=15579Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Calls to ext4_get_inode_loc() returns with a reference to a buffer
head in iloc->bh.  The callers of this function in ext4_write_inode()
when in no journal mode and in ext4_xattr_fiemap() don't release the
buffer head after using it.

Addresses-Google-Bug: #2548165
Signed-off-by: NCurt Wohlgemuth <curtw@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

In the no-journal case, ext4_write_inode() will fetch the bh and call
sync_dirty_buffer() on it.  However, if the bh has already been
written and the bh reclaimed for some other purpose, AND if the inode
is the only one in the inode table block in use, then
ext4_get_inode_loc() will not read the inode table block from disk,
but as an optimization, fill the block with zero's assuming that its
caller will copy in the on-disk version of the inode.  This is not
done by ext4_write_inode(), so the contents of the inode can simply
get lost.  The fix is to use __ext4_get_inode_loc() with in_mem set to
0, instead of ext4_get_inode_loc().  Long term the API needs to be
fixed so it's obvious why latter is not safe.

Addresses-Google-Bug: #2526446
Signed-off-by: NCurt Wohlgemuth <curtw@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

When used_dirs was introduced for the flex_groups struct, it looks
like the accounting was not put into place properly, in some places
manipulating free_inodes rather than used_dirs.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

When ext4 driver is used to mount a filesystem instead of the ext3 file
system driver (through CONFIG_EXT4_USE_FOR_EXT23), do not enable delayed
allocation by default since some ext3 users and application writers have
developed unfortunate expectations about the safety of writing files on
systems subject to sudden and violent death without using fsync().
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Oops.  (Blush.)

Thanks to Sedat Dilek for pointing this out.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

http://bugzilla.kernel.org/show_bug.cgi?id=15420Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Constify struct sysfs_ops.

This is part of the ops structure constification
effort started by Arjan van de Ven et al.

Benefits of this constification:

 * prevents modification of data that is shared
   (referenced) by many other structure instances
   at runtime

 * detects/prevents accidental (but not intentional)
   modification attempts on archs that enforce
   read-only kernel data at runtime

 * potentially better optimized code as the compiler
   can assume that the const data cannot be changed

 * the compiler/linker move const data into .rodata
   and therefore exclude them from false sharing
Signed-off-by: NEmese Revfy <re.emese@gmail.com>
Acked-by: NDavid Teigland <teigland@redhat.com>
Acked-by: NMatt Domsch <Matt_Domsch@dell.com>
Acked-by: NMaciej Sosnowski <maciej.sosnowski@intel.com>
Acked-by: NHans J. Koch <hjk@linutronix.de>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NJens Axboe <jens.axboe@oracle.com>
Acked-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This gives the filesystem more information about the writeback that
is happening.  Trond requested this for the NFS unstable write handling,
and other filesystems might benefit from this too by beeing able to
distinguish between the different callers in more detail.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

ext4 uses rb_node = NULL; to zero rb_root at few places.  Using
RB_ROOT as the initializer is more portable in case the underlying
implementation of rbtrees changes in the future.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Eric Paris <eparis@redhat.com>

Get rid of the initialize dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.

Rename the now static low-level dquot_initialize helper to __dquot_initialize
and vfs_dq_init to dquot_initialize to have a consistent namespace.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Currently various places in the VFS call vfs_dq_init directly.  This means
we tie the quota code into the VFS.  Get rid of that and make the
filesystem responsible for the initialization.   For most metadata operations
this is a straight forward move into the methods, but for truncate and
open it's a bit more complicated.

For truncate we currently only call vfs_dq_init for the sys_truncate case
because open already takes care of it for ftruncate and open(O_TRUNC) - the
new code causes an additional vfs_dq_init for those which is harmless.

For open the initialization is moved from do_filp_open into the open method,
which means it happens slightly earlier now, and only for regular files.
The latter is fine because we don't need to initialize it for operations
on special files, and we already do it as part of the namespace operations
for directories.

Add a dquot_file_open helper that filesystems that support generic quotas
can use to fill in ->open.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Get rid of the drop dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.

Rename the now static low-level dquot_drop helper to __dquot_drop
and vfs_dq_drop to dquot_drop to have a consistent namespace.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Currently clear_inode calls vfs_dq_drop directly.  This means
we tie the quota code into the VFS.  Get rid of that and make the
filesystem responsible for the drop inside the ->clear_inode
superblock operation.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Get rid of the transfer dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.

Rename the now static low-level dquot_transfer helper to __dquot_transfer
and vfs_dq_transfer to dquot_transfer to have a consistent namespace,
and make the new dquot_transfer return a normal negative errno value
which all callers expect.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Get rid of the alloc_inode and free_inode dquot operations - they are
always called from the filesystem and if a filesystem really needs
their own (which none currently does) it can just call into it's
own routine directly.

Also get rid of the vfs_dq_alloc/vfs_dq_free wrappers and always
call the lowlevel dquot_alloc_inode / dqout_free_inode routines
directly, which now lose the number argument which is always 1.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Get rid of the alloc_space, free_space, reserve_space, claim_space and
release_rsv dquot operations - they are always called from the filesystem
and if a filesystem really needs their own (which none currently does)
it can just call into it's own routine directly.

Move shared logic into the common __dquot_alloc_space,
dquot_claim_space_nodirty and __dquot_free_space low-level methods,
and rationalize the wrappers around it to move as much as possible
code into the common block for CONFIG_QUOTA vs not.  Also rename
all these helpers to be named dquot_* instead of vfs_dq_*.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

a) Fix sparse warning in ext4_ioctl()
b) Remove unneeded variable in mext_leaf_block()
c) Fix spelling typo in mext_check_arguments()
Signed-off-by: NAkira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

If EXT4_IOC_MOVE_EXT ioctl is called with NULL donor_fd, fget() in
ext4_ioctl() gets inappropriate file structure for donor; so we need
to do this check earlier, before calling double_down_write_data_sem().
Signed-off-by: NAkira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>