Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 25 5月, 2015 10 次提交
  3. 09 1月, 2015 5 次提交
  5. 24 11月, 2014 7 次提交
  7. 20 11月, 2014 1 次提交
  9. 12 11月, 2014 1 次提交
    • C
      scsi: don't set tagging state from scsi_adjust_queue_depth · c8b09f6f
      由 Christoph Hellwig 提交于 
      Remove the tagged argument from scsi_adjust_queue_depth, and just let it
handle the queue depth.  For most drivers those two are fairly separate,
given that most modern drivers don't care about the SCSI "tagged" status
of a command at all, and many old drivers allow queuing of multiple
untagged commands in the driver.

Instead we start out with the ->simple_tags flag set before calling
->slave_configure, which is how all drivers actually looking at
->simple_tags except for one worke anyway.  The one other case looks
broken, but I've kept the behavior as-is for now.

Except for that we only change ->simple_tags from the ->change_queue_type,
and when rejecting a tag message in a single driver, so keeping this
churn out of scsi_adjust_queue_depth is a clear win.

Now that the usage of scsi_adjust_queue_depth is more obvious we can
also remove all the trivial instances in ->slave_alloc or ->slave_configure
that just set it to the cmd_per_lun default.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
      c8b09f6f
  11. 10 11月, 2014 1 次提交
  13. 17 9月, 2014 12 次提交
    • S
      megaraid_sas : Driver version update · 0d9d8b9f
      由 Sumit.Saxena@avagotech.com 提交于 
      Resending the patch. Addressed the review comments by Tomas Henzl.

Driver version upgrade patch.
Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com>
Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
      0d9d8b9f
    • S
      megaraid_sas : MFI MPT linked list corruption fix · 90dc9d98
      由 Sumit.Saxena@avagotech.com 提交于 
      Resending the patch. Addressed the review comments from Tomas Henzl.
Added comment for to-do work.

Problem statement:
MFI link list in megaraid_sas driver is used from mfi-mpt pass-through commands.
This list can be corrupted due to many possible race conditions in driver and
eventually we may see kernel panic.

One example -
MFI frame is freed from calling process as driver send command via polling method and interrupt
for that command comes after driver free mfi frame (actually even after some other context reuse
the mfi frame). When driver receive MPT frame in ISR, driver will be using the index of MFI and
access that MFI frame and finally in-used MFI frame’s list will be corrupted.

High level description of new solution -
Free MFI and MPT command from same context.
Free both the command either from process (from where mfi-mpt pass-through was called) or from
ISR context. Do not split freeing of MFI and MPT, because it creates the race condition which
will do MFI/MPT list corruption.

Renamed the cmd_pool_lock which is used in instance as well as fusion with below name.
mfi_pool_lock and mpt_pool_lock to add more code readability.
Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com>
Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
      90dc9d98
    • S
      megaraid_sas : Add module parameter to disable IRQ-CPU affinity hint · ac95136a
      由 Sumit.Saxena@avagotech.com 提交于 
      Resending the patch. Addressed the review comments from Tomas Henzl.

For certain deployment, we may need to disable irq cpu affinity hint.
This module parameter provides option for use to disable irq cpu affinity hint
and allow irqbalancer to handle the rest.
Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com>
Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
      ac95136a
    • S
      megaraid_sas : Host lock less mode to enabled asynchronous IO submission · fb1a24ff
      由 Sumit.Saxena@avagotech.com 提交于 
      Resending the patch. Addressed the review comments from Tomas Henzl.

Megaraid_sas driver can now work in host lock less mode.
Remove host lock less as megaraid_sas driver will have safer access to raid map as described in earlier patch.

We now keep Driver Raid map copy, which will make sure
that driver will always have old or new map
Driver raid map will be replaced safely in MR_PopulateDrvRaidMap(), so there is no issue
even if IO is continue from the scsi mid layer.

There is a plan to remove "host_lock" and "hba_lock" usage from megaraid_sas in future.
Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com>
Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
      fb1a24ff
    • S
      megaraid_sas : Extended VD support · 51087a86
      由 Sumit.Saxena@avagotech.com 提交于 
      Resending the patch. Addressed the review comments from Tomas Henzl.
reserved1 field(part of union) of Raid map struct was not required so it is removed.

Current MegaRAID firmware and hence the driver only supported 64VDs.
E.g: If the user wants to create more than 64VD on a controller,
    it is not possible on current firmware/driver.

New feature and requirement to support upto 256VD, firmware/driver/apps need changes.
In addition to that there must be a backward compatibility of the new driver with the
older firmware and vice versa.

RAID map is the interface between Driver and FW to fetch all required
fields(attributes) for each Virtual Drives.
In the earlier design driver was using the FW copy of RAID map where as
in the new design the Driver will keep the RAID map copy of its own; on which
it will operate for any raid map access in fast path.

Local driver raid map copy will provide ease of access through out the code
and provide generic interface for future FW raid map changes.

For the backward compatibility driver will notify FW that it supports 256VD
to the FW in driver capability field.
Based on the controller properly returned by the FW, the Driver will know
whether it supports 256VD or not and will copy the RAID map accordingly.

At any given time, driver will always have old or new Raid map.
So with this changes, driver can also work in host lock less mode. Please
see next patch which enable host lock less mode for megaraid_sas driver.
Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com>
Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
      51087a86
    • S
      megaraid_sas : Firmware crash dump feature support · fc62b3fc
      由 Sumit.Saxena@avagotech.com 提交于 
      Resending the patch. Addressed the review comments from Tomas Henzl.
Move buff_offset inside spinlock, corrected loop at crash dump buffer free,
reset_devices check is added to disable fw crash dump feature in kdump kernel.

This feature will provide similar interface as kernel crash dump feature.
When megaraid firmware encounter any crash, driver will collect the firmware raw image and
dump it into pre-configured location.

Driver will allocate two different segment of memory.
#1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump.
#2 DMA buffer (persistence allocation) just to do a arbitrator job.

Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2,
which will be copy back by driver to the host memory as described in #1.

Driver-Firmware interface:
==================
A.) Host driver can allocate maximum 512MB Host memory to store crash dump data.

This memory will be internal to the host and will not be exposed to the Firmware.
Driver may not be able to allocate 512 MB. In that case, driver will do possible memory
(available at run time) allocation to store crash dump data.

Let’s call this buffer as Host Crash Buffer.

Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory.
This will be internal to driver and firmware/application are unaware of it.
Partial allocation of Host Crash buffer may have valid information to debug depending upon
what was collected in that buffer and depending on nature of failure.

Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing.
Host Crash buffer will be allocated only when FW Crash dump data is available,
and will be deallocated once application copy Host Crash buffer to the file.
Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs)

B.) Irrespective of underlying Firmware capability of crash dump support,
driver will allocate DMA buffer at start of the day for each MR controllers.
Let’s call this buffer as “DMA Crash Buffer”.

For this feature, size of DMA crash buffer will be 1MB.
(We will not gain much even if DMA buffer size is increased.)

C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”.
Driver should extract the information from ctrl info provided by firmware and
figure out if firmware support crash dump feature or not.

Driver will enable crash dump feature only if
“Firmware support Crash dump” +
“Driver was able to create DMA Crash Buffer”.

If either one from above is not set, Crash dump feature should be disable in driver.
Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON”

Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from
host memory to the filesystem.
Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com>
Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
      fc62b3fc
    • S
      megaraid_sas : Do not scan non syspd drives · 07e38d94
      由 Sumit.Saxena@avagotech.com 提交于 
      Resending the patch. Addressed the review comments from Tomas Henzl.

Current driver allow device scan for all the devices on channel 0 and 1.
E.a If we have two single drive raid volumes, we may see prints like below.
First two prints are for physical device which are used to form VD.
Prints like this creates confusion as it is really not required to scan any
hidden physical devices.

scsi1 : LSI SAS based MegaRAID driver
scsi 1:0:0:0: Direct-Access     LSI      MR9361-8i        4.21 PQ: 0 ANSI: 5
scsi 1:0:1:0: Direct-Access     LSI      MR9361-8i        4.21 PQ: 0 ANSI: 5
scsi 1:2:0:0: Direct-Access     LSI      MR9361-8i        4.21 PQ: 0 ANSI: 5
scsi 1:2:1:0: Direct-Access     LSI      MR9361-8i        4.21 PQ: 0 ANSI: 5

When slave_alloc called, sdev-type will not be set, so current code will always
return "0" in slave_alloc callback.
This patch make sure that driver return "-ENXIO" for non-syspd devices.

After this patch, we will see prints in syslog only for devices which are exposed.
For current example, below print will be available in syslog.

scsi1 : LSI SAS based MegaRAID driver
scsi 1:2:0:0: Direct-Access     LSI      MR9361-8i        4.21 PQ: 0 ANSI: 5
scsi 1:2:1:0: Direct-Access     LSI      MR9361-8i        4.21 PQ: 0 ANSI: 5
Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com>
Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
      07e38d94
    • A
      megaraid_sas: Version and Changelog update · 5e8d9007
      由 Adam Radford 提交于 
      The following patch for megaraid_sas updates the driver version and
Documentation/scsi/ChangeLog.megaraid_sas.
Signed-off-by: NAdam Radford <aradford@gmail.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
      5e8d9007
    • A
      megaraid_sas: Add missing initial call to megasas_get_ld_vf_affiliation(). · 9ea81f81
      由 Adam Radford 提交于 
      The following patch for megaraid_sas adds a missing initial call to
megasas_get_ld_vf_affiliation() at the end of megasas_probe_one().
Signed-off-by: NAdam Radford <aradford@gmail.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
      9ea81f81
    • A
      megaraid_sas: Fix LD/VF affiliation parsing · 4cbfea88
      由 Adam Radford 提交于 
      The following patch for megaraid_sas fixes the LD/VF affiliation policy parsing
code to account for LD targetId's and Hidden LD's (not yet affiliated with any
Virtual Functions).  This also breaks megasas_get_ld_vf_affiliation() into 2
separate functions:  megasas_get_ld_vf_affiliation_111() and
megasas_get_ld_Vf_affiliation_12() to reduce indentation levels.
Signed-off-by: NAdam Radford <aradford@gmail.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
      4cbfea88
    • A
      megaraid: Use pci_enable_msix_range() instead of pci_enable_msix() · 8ae80ed1
      由 Alexander Gordeev 提交于 
      As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range()  or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Acked-by: NKashyap Desai <Kashyap.desai@avagotech.com>
Cc: Neela Syam Kolli <megaraidlinux@lsi.com>
Cc: linux-scsi@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: NChristoph Hellwig <hch@lst.de>
      8ae80ed1
    • A
      megaraid: Fail resume if MSI-X re-initialization failed · dd088128
      由 Alexander Gordeev 提交于 
      Currently the driver fails to analize MSI-X re-enablement
status on resuming and always assumes the success. This
update checks the MSI-X initialization result and fails
to resume if MSI-Xs re-enablement failed.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Acked-by: NKashyap Desai <Kashyap.desai@avagotech.com>
Cc: Neela Syam Kolli <megaraidlinux@lsi.com>
Cc: linux-scsi@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: NChristoph Hellwig <hch@lst.de>
      dd088128
  15. 09 8月, 2014 1 次提交
  17. 19 5月, 2014 1 次提交
  19. 16 3月, 2014 1 次提交