Create a kconfig option symbol for PCI_LABEL and enable it
when DMI || ACPI are enabled.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] compile fix for latest binutils
  [S390] cio: prevent purging of CCW devices in the online state
  [S390] qdio: fix init sequence
  [S390] Fix parameter passing for smp_switch_to_cpu()
  [S390] oprofile s390: prevent stack corruption

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  quota: Don't write quota info in dquot_commit()
  ext3: Fix writepage credits computation for ordered mode

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: mpc8xxx_wdt: fix build

Since 1c48a5c9 (dt: Eliminate of_platform_{,un}register_driver)
mpc8xxx_wdt no longer builds as it tries to refer to a 'match' variable
rather than ofdev->dev.of_match that it checks just before.
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Merge branch 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6

* 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6:
  efifb: Add override for 11" Macbook Air 3,1
  efifb: Support overriding fields FW tells us with the DMI data.
  fb: Reduce priority of resource conflict message
  savagefb: Remove obsolete else clause in savage_setup_i2c_bus
  savagefb: Set up I2C based on chip family instead of card id
  savagefb: Replace magic register address with define
  drivers/video/bfin-lq035q1-fb.c: introduce missing kfree
  video: s3c-fb: fix checkpatch errors and warning
  efifb: support AMD Radeon HD 6490
  s3fb: fix Virge/GX2
  fbcon: Remove unused 'display *p' variable from fb_flashcursor()
  fbdev: sh_mobile_lcdcfb: fix module lock acquisition
  fbdev: sh_mobile_lcdcfb: add blanking support
  viafb: initialize margins correct
  viafb: refresh rate bug collection
  sh: mach-ap325rxa: move backlight control code
  sh: mach-ecovec24: support for main lcd backlight

Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  ARM: arch-shmobile: only run FSI init on respective boards
  ARM: arch-shmobile: only run HDMI init on respective boards
  ARM: mach-shmobile: Correctly check for CONFIG_MACH_MACKEREL

* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: select ARCH_NO_SYSDEV_OPS.
  sh: fix build error in board-sh7757lcr.c
  sh: landisk: Remove whitespace
  sh: landisk: Remove mv_nr_irqs
  sh: sh-sci: Fix double initialization by serial_console_setup
  serial: sh-sci: prevent setup of uninitialized serial console
  dma: shdma: add checking the DMAOR_AE in sh_dmae_err

Merge branches 'x86-fixes-for-linus', 'sched-fixes-for-linus', 'timers-fixes-for-linus', 'irq-fixes-for-linus' and 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-32, fpu: Fix FPU exception handling on non-SSE systems
  x86, hibernate: Initialize mmu_cr4_features during boot
  x86-32, NUMA: Fix ACPI NUMA init broken by recent x86-64 change
  x86: visws: Fixup irq overhaul fallout

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Clean up rebalance_domains() load-balance interval calculation

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/mrst/vrtc: Fix boot crash in mrst_rtc_init()
  rtc, x86/mrst/vrtc: Fix boot crash in rtc_read_alarm()

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Fix cpumask leak in __setup_irq()

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf probe: Fix listing incorrect line number with inline function
  perf probe: Fix to find recursively inlined function
  perf probe: Fix multiple --vars options behavior
  perf probe: Fix to remove redundant close
  perf probe: Fix to ensure function declared file

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (28 commits)
  staging: usbip: bugfix for isochronous packets and optimization
  staging: usbip: bugfix add number of packets for isochronous frames
  staging: usbip: bugfixes related to kthread conversion
  staging: usbip: fix shutdown problems.
  staging: hv: Fix GARP not sent after Quick Migration
  staging: IIO: IMU: ADIS16400: Avoid using printk facility directly
  staging: IIO: IMU: ADIS16400: Fix product ID check, skip embedded revision number
  staging: IIO: IMU: ADIS16400: Make sure only enabled scan_elements are pushed into the ring
  staging: IIO: IMU: ADIS16400: Fix addresses of GYRO and ACCEL calibration offset
  staging: IIO: IMU: ADIS16400: Add delay after self test
  staging: IIO: IMU: ADIS16400: Fix up SPI messages cs_change behavior
  staging/rtl81*: build as loadable modules only
  staging: brcm80211: removed 'is_amsdu causing toss' log spam
  staging: brcm80211: fix for 'Short CCK' log spam
  staging: brcm80211: fix for 'AC_BE txop..' logs spammed problem
  staging: memrar: remove driver from tree
  staging: sep: remove last memrar remnants
  staging: fix hv_mouse build, needs delay.h
  staging: fix olpc_dcon build errors
  staging: sm7xx: fixed defines
  ...

Fix up trivial conflict in drivers/staging/memrar/memrar_handler.c
(deleted vs trivial spelling fixes)

* 'kvm-updates/2.6.39' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: move and fix substitue search for missing CPUID entries
  KVM: fix XSAVE bit scanning
  KVM: Enable async page fault processing
  KVM: fix crash on irqfd deassign

* 'for-linus' of git://git.infradead.org/ubifs-2.6:
  UBI: do not select KALLSYMS_ALL
  UBI: do not compare array with NULL
  UBI: check if we are in RO mode in the erase routine
  UBIFS: fix debugging failure in dbg_check_space_info
  UBIFS: fix error path in dbg_debugfs_init_fs
  UBIFS: unify error path dbg_debugfs_init_fs
  UBIFS: do not select KALLSYMS_ALL
  UBIFS: fix assertion warnings
  UBIFS: fix oops on error path in read_pnode
  UBIFS: do not read flash unnecessarily

* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6:
  Fix common misspellings

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Add support for CH Pro Throttle
  HID: hid-magicmouse: Increase evdev buffer size
  HID: add FF support for Logitech G25/G27
  HID: roccat: Add support for wireless variant of Pyra
  HID: Fix typo Keyoutch -> Keytouch
  HID: add support for Skycable 0x3f07 wireless presenter

Fix build failure issue for hv_mouse
When build 2.6.39-rc1 kernel, it will be blocked at build hv_mouse.

  drivers/staging/hv/hv_mouse.c: In function ‘ReleaseInputDevice’:
  drivers/staging/hv/hv_mouse.c:293: error: implicit declaration of function ‘udelay’
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The normal mmap paths all avoid creating a mapping where the pgoff
inside the mapping could wrap around due to overflow.  However, an
expanding mremap() can take such a non-wrapping mapping and make it
bigger and cause a wrapping condition.

Noticed by Robert Swiecki when running a system call fuzzer, where it
caused a BUG_ON() due to terminally confusing the vma_prio_tree code.  A
vma dumping patch by Hugh then pinpointed the crazy wrapped case.
Reported-and-tested-by: NRobert Swiecki <robert@swiecki.net>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The sfi_mrtc_array[] only gets initialized when the sfi mrtc
table is parsed, so the vrtc_paddr should be initalized after it
too.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1302140389-27603-1-git-send-email-feng.tang@intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Commit f44f7f96 ("RTC: Initialize kernel state from RTC") caused a
boot regression on the MRST platform.

The reason is that rtc_device_register() calls rtc_read_alarm() after
that change, which function does not have all driver data set up yet.

The rtc-mrst driver needs to call dev_set_drvdata() before rtc_device_register()
gets called.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Acked-by: NJohn Stultz <john.stultz@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1302140384-27571-1-git-send-email-feng.tang@intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

On 32bit systems without SSE (that is, they use FSAVE/FRSTOR for FPU
context switches), FPU exceptions in user mode cause Oopses, BUGs,
recursive faults and other nasty things:

fpu exception: 0000 [#1]
last sysfs file: /sys/power/state
Modules linked in: psmouse evdev pcspkr serio_raw [last unloaded: scsi_wait_scan]

Pid: 1638, comm: fxsave-32-excep Not tainted 2.6.35-07798-g58a992b9-dirty #633 VP3-596B-DD/VT82C597
EIP: 0060:[<c1003527>] EFLAGS: 00010202 CPU: 0
EIP is at math_error+0x1b4/0x1c8
EAX: 00000003 EBX: cf9be7e0 ECX: 00000000 EDX: cf9c5c00
ESI: cf9d9fb4 EDI: c1372db3 EBP: 00000010 ESP: cf9d9f1c
DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
Process fxsave-32-excep (pid: 1638, ti=cf9d8000 task=cf9be7e0 task.ti=cf9d8000)
Stack:
00000000 00000301 00000004 00000000 00000000 cf9d3000 cf9da8f0 00000001
<0> 00000004 cf9b6b60 c1019a6b c1019a79 00000020 00000242 000001b6 cf9c5380
<0> cf806b40 cf791880 00000000 00000282 00000282 c108a213 00000020 cf9c5380
Call Trace:
[<c1019a6b>] ? need_resched+0x11/0x1a
[<c1019a79>] ? should_resched+0x5/0x1f
[<c108a213>] ? do_sys_open+0xbd/0xc7
[<c108a213>] ? do_sys_open+0xbd/0xc7
[<c100353b>] ? do_coprocessor_error+0x0/0x11
[<c12d5965>] ? error_code+0x65/0x70
Code: a8 20 74 30 c7 44 24 0c 06 00 03 00 8d 54 24 04 89 d9 b8 08 00 00 00 e8 9b 6d 02 00 eb 16 8b 93 5c 02 00 00 eb 05 e9 04 ff ff ff <9b> dd 32 9b e9 16 ff ff ff 81 c4 84 00 00 00 5b 5e 5f 5d c3 c6
EIP: [<c1003527>] math_error+0x1b4/0x1c8 SS:ESP 0068:cf9d9f1c

This usually continues in slight variations until the system is reset.

This bug was introduced by commit 58a992b9:
	x86-32, fpu: Rewrite fpu_save_init()
Signed-off-by: NHans Rosenfeld <hans.rosenfeld@amd.com>
Link: http://lkml.kernel.org/r/1302106003-366952-1-git-send-email-hans.rosenfeld@amd.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

For isochronous packets the actual_length is the sum of the actual
length of each of the packets, however between the packets might be
padding, so it is not sufficient to just send the first actual_length
bytes of the buffer. To fix this and simultanesouly optimize the
bandwidth the content of the isochronous packets are send without the
padding, the padding is restored on the receiving end.
Signed-off-by: NArjan Mels <arjan.mels@gmx.net>
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Cc: Max Vozeler <max@vozeler.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The number_of_packets was not transmitted for RET_SUBMIT packets. The
linux client used the stored number_of_packet from the submitted
request. The windows userland client does not do this however and needs
to know the number_of_packets to determine the size of the transmission.
Signed-off-by: NArjan Mels <arjan.mels@gmx.net>
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Cc: Max Vozeler <max@vozeler.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When doing a usb port reset do a queued reset instead to prevent a
deadlock: the reset will cause the driver to unbind, causing the
usb_driver_lock_for_reset to stall.
Signed-off-by: NArjan Mels <arjan.mels@gmx.net>
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Cc: Max Vozeler <max@vozeler.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When shuting down the tcp_rx and tcp_tx threads first check if they are
not closed already (maybe because an error caused them to return).
Signed-off-by: NArjan Mels <arjan.mels@gmx.net>
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Cc: Max Vozeler <max@vozeler.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

After Quick Migration, the network is not immediately operational in the
current context when receiving RNDIS_STATUS_MEDIA_CONNECT event. So, I added
another netif_notify_peers() into a scheduled work, otherwise GARP packet will
not be sent after quick migration, and cause network disconnection.

Thanks to Mike Surcouf <mike@surcouf.co.uk> for reporting the bug and
testing the patch.
Reported-by: NMike Surcouf <mike@surcouf.co.uk>
Tested-by: NMike Surcouf <mike@surcouf.co.uk>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NHank Janssen <hjanssen@microsoft.com>
Signed-off-by: NAbhishek Kane <v-abkane@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Restore the initialization of mmu_cr4_features during boot, which was
removed without comment in checkin e5f15b45

x86: Cleanup highmap after brk is concluded

thereby breaking resume from hibernate.  This restores previous
functionality in approximately the same place, and corrects the
reading of %cr4 on pre-CPUID hardware (%cr4 exists if and only if
CPUID is supported.)

However, part of the problem is that the hibernate suspend/resume
sequence should manage the save/restore of %cr4 explicitly.
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <201104020154.57136.rjw@sisk.pl>

Now that everything that was using these interfaces has been converted to
the syscore ops, prevent new code from using the old API.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

If several boards are enabled in the kernel configuration,
fsi_init_pm_clock() functions from board-ap4evb.c
will run on any of them. Prevent this by calling these functions from the
.init_machine() callback instead of using device_initcall().
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Magnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

If several boards are enabled in the kernel configuration,
hdmi_init_pm_clock() functions from board-ap4evb.c and board-mackerel.c
will run on any of them. Prevent this by calling these functions from the
.init_machine() callback instead of using device_initcall().
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Magnus Damm <damm@opensource.se>
Tested-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

I made a bit of a thinko when adding Mackerel to the boards
that support zboot using MMCIF.
Reported-by: NMagnus Damm <magnus.damm@gmail.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The 11" Macbook Air appears to claim that its stride is 1366, when it's
actually 2048. Override it.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NPeter Jones <pjones@redhat.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Some machines apparently give us bogus linelength/stride/pitch data, so
we need to support letting the DMI table override the supplied data.

I bet you can't guess whose machines I'm talking about.
Signed-off-by: NPeter Jones <pjones@redhat.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

It's expected that efifb will conflict with a native driver, so the
handover message should be informational rather than an error.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Acked-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The else clause was not needed after the cleanup in commit
b8901b09Signed-off-by: NTormod Volden <debian.tormod@gmail.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

In practice this means enabling I2C (for DDC2) on all prosavage cards,
like the xorg ddx does. The savage4 and savage2000 families have only
one member each, so there is no change for those.

Tested on TwisterK.
Signed-off-by: NTormod Volden <debian.tormod@gmail.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

MM_SERIAL1 was already defined, but not used.
Signed-off-by: NTormod Volden <debian.tormod@gmail.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Error handling code following a kmalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch fixes the checkpatch errors listed below:

ERROR: space required before the open parenthesis '('
ERROR: need consistent spacing around '+' (ctx:WxV)
ERROR: space prohibited before that close parenthesis ')'

Also, following warning is fixed by adding 'platid' variable
which can reduce number of lines exceeding 80 characters.

WARNING: line over 80 characters
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

CH Pro Throttle needs NOGET the same way as other products from
the same vendor require.
Reported-by: NUnavowed <unavowed@vexillium.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The evdev buffer isn't big enough when you get many fingers on the
device. Bump up the buffer to a reasonable size, matching what other
multitouch devices use. Without this change, events may be discarded in
the evdev buffer before they are read.
Reported-by: NSimon Budig <simon@budig.de>
Cc: Henrik Rydberg <rydberg@euromail.se>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: stable@kernel.org
Signed-off-by: NChase Douglas <chase.douglas@canonical.com>
Acked-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Merge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/urgent