- 04 10月, 2009 12 次提交
-
-
git://www.linux-m32r.org/git/takata/linux-2.6_dev由 Linus Torvalds 提交于
* 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev: m32r: Fix IPI function calls for SMP m32r: Fix set_memory() for DISCONTIGMEM m32r: add rtc_lock variable m32r: define ioread* and iowrite* macros m32r: export delay loop symbols m32r: fix tme_handler
-
由 Linus Torvalds 提交于
A couple of people have hit the WARN_ON() in drivers/char/tty_io.c, tty_open() that is unhappy about seeing the tty line discipline go away during the tty hangup. See for example http://bugzilla.kernel.org/show_bug.cgi?id=14255 and the reason is that we do the tty_ldisc_halt() outside the ldisc_mutex in order to be able to flush the scheduled work without a deadlock with vhangup_work. However, it turns out that we can solve this particular case by - using "cancel_delayed_work_sync()" in tty_ldisc_halt(), which waits for just the particular work, rather than synchronizing with any random outstanding pending work. This won't deadlock, since the buf.work we synchronize with doesn't care about the ldisc_mutex, it just flushes the tty ldisc buffers. - realize that for this particular case, we don't need to wait for any hangup work, because we are inside the hangup codepaths ourselves. so as a result we can just drop the flush_scheduled_work() entirely, and then move the tty_ldisc_halt() call to inside the mutex. That way we never expose the partially torn down ldisc state to tty_open(), and hold the ldisc_mutex over the whole sequence. Reported-by: NIngo Molnar <mingo@elte.hu> Reported-by: NHeinz Diehl <htd@fancy-poultry.org> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Toshihiro HANAWA 提交于
This patch fixes the m32r SMP kernel after 2.6.27. A part of the following patch breaks m32r SMP operation. > m32r: convert to generic helpers for IPI function calls > commit 7b7426c8 In the above patch, a CALL_FUNC_SINGLE_IPI was newly introduced, but the its IPI vector number was wrong in the patch code. The m32r SMP kernel hanged-up during boot operation, because the CPU_BOOT_IPI was called instead of CALL_FUNC_SINGLE_IPI (CPU_BOOT_IPI had no side effect at that time because the 2nd core had already been started up), as a result, csd_unlock() was not called, then a dead lock occurred in csd_lock_wait() after the detection of Compact Flash memory as IDE generic disk. Signed-off-by: NToshihiro HANAWA <hanawa@ccs.tsukuba.ac.jp> Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
-
由 Hirokazu Takata 提交于
In case CONFIG_DISCONTIGMEM is set, the memory size of system was always determined by CONFIG_MEMORY_SIZE and was not changeable. This patch fixes set_memory() of arch/m32r/mm/discontig.c so that we can specify memory size by the "mem=<size>" kernel parameter. Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
-
由 Hirokazu Takata 提交于
Add a spinlock variable "rtc_lock". This is taken from arch/arm/kernel/time.c. Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
-
由 Hirokazu Takata 提交于
Define ioread* and iowrite* macros to fix the following build errors: CC [M] drivers/uio/uio_smx.o drivers/uio/uio_smx.c: In function 'smx_handler': drivers/uio/uio_smx.c:31: error: implicit declaration of function 'ioread32' drivers/uio/uio_smx.c:37: error: implicit declaration of function 'iowrite32' Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
-
由 Hirokazu Takata 提交于
- Move EXPORT_SYMBOL lines of delay loop functions from arch/m32r/kernel/m32r_ksyms.c to arch/m32r/lib/delay.c. - Export __ndelay. Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
-
由 Hirokazu Takata 提交于
Fix pmd_bad check code of tme_handler (TLB Miss Exception handler). The correct _KERNPG_TABLE value is not 0x263(=611) but 0x163. Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of ssh://master.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (21 commits) ALSA: usb - Use strlcat() correctly ALSA: Fix invalid __exit in sound/mips/*.c ALSA: hda - Fix / improve ALC66x parser ALSA: ctxfi: Swapped SURROUND-SIDE mute sound: Make keywest_driver static ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-B1VP ALSA: hda - Fix digita/analog mic auto-switching with IDT codecs ASoC: fix kconfig order of Blackfin drivers ALSA: hda - Added quirk to enable sound on Toshiba NB200 ASoC: Fix dependency of CONFIG_SND_PXA2XX_SOC_IMOTE2 ALSA: Don't assume i2c device probing always succeeds ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-T350P ALSA: echoaudio - Re-enable the line-out control for the Mia card ALSA: hda - Resurrect input-source mixer of ALC268 model=acer ALSA: hda - Analog Devices AD1984A add HP Touchsmart model ALSA: hda - Add HP Pavilion dv4t-1300 to MSI whitelist ALSA: hda - CD-audio sound for hda-intel conexant benq laptop ASoC: DaVinci: Correct McASP FIFO initialization ASoC: Davinci: Fix race with cpu_dai->dma_data ASoC: DaVinci: Fix divide by zero error during 1st execution ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: [PATCH] ext4: retry failed direct IO allocations ext4: Fix build warning in ext4_dirty_inode() ext4: drop ext4dev compat ext4: fix a BUG_ON crash by checking that page has buffers attached to it
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
- 03 10月, 2009 22 次提交
-
-
由 Eric Sandeen 提交于
On a 256M filesystem, doing this in a loop: xfs_io -F -f -d -c 'pwrite 0 64m' test rm -f test eventually leads to ENOSPC. (the xfs_io command does a 64m direct IO write to the file "test") As with other block allocation callers, it looks like we need to potentially retry the allocations on the initial ENOSPC. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Curt Wohlgemuth 提交于
This fixes the following warning: fs/ext4/inode.c: In function 'ext4_dirty_inode': fs/ext4/inode.c:5615: warning: unused variable 'current_handle' We remove the jbd_debug() statement which does use current_handle, as it's not terribly important in the grand scheme of things. Thanks to Stephen Rothwell for pointing this out. Signed-off-by: NCurt Wohlgemuth <curtw@google.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: (25 commits) ARM: 5728/1: Proper prefetch abort handling on ARMv6 and ARMv7 ARM: 5727/1: Pass IFSR register to do_PrefetchAbort() ARM: 5740/1: fix valid_phys_addr_range() range check ARM: 5739/1: ARM: allow empty ATAG_CORE ARM: 5735/1: sa1111: CodingStyle cleanups ARM: 5738/1: Correct TCM documentation ARM: 5734/1: arm: fix compilation of entry-common.S for older CPUs ARM: 5733/1: fix bcmring compile error ARM: 5732/1: remove redundant include file ARM: 5731/2: Fix U300 generic GPIO, remove ifdefs from MMCI v3 ARM: Ensure do_cache_op takes mmap_sem ARM: Fix __cpuexit section mismatch warnings ARM: Don't allow highmem on SMP platforms without h/w TLB ops broadcast ARM: includecheck fix: mach-davinci, board-dm365-evm.c ARM: Remove unused CONFIG SA1100_H3XXX ARM: Fix warning: unused variable 'highmem' ARM: Fix warning: #warning syscall migrate_pages not implemented ARM: Fix SA11x0 clocksource warning ARM: Fix SA1100 Neponset serial section mismatch ARM: Fix SA1100 Assabet/Neponset PCMCIA section mismatch warnings ...
-
由 Kirill A. Shutemov 提交于
Currently, on ARMv6 and ARMv7, if an application tries to execute code (or garbage) on non-executable page it hangs. It caused by incorrect prefetch abort handling. Now every prefetch abort processes as a translation fault. To fix this we have to analyze instruction fault status register to figure out reason why we've got the abort and process it accordingly. To make IFSR different from DFSR we set bit 31 which is reserved in both IFSR and DFSR. This patch also tries to protect from future hangs on unexpected exceptions. An application will be killed if unexpected exception type was received. Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Kirill A. Shutemov 提交于
Instruction fault status register, IFSR, was introduced on ARMv6 to provide status information about the last insturction fault. It needed for proper prefetch abort handling. Now we have three prefetch abort model: * legacy - for CPUs before ARMv6. They doesn't provide neither IFSR nor IFAR. We simulate IFSR with section translation fault status for them to generalize code; * ARMv6 - provides IFSR, but not IFAR; * ARMv7 - provides both IFSR and IFAR. Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Greg Ungerer 提交于
Commit 1522ac3e ("Fix virtual to physical translation macro corner cases") breaks the end of memory check in valid_phys_addr_range(). The modified expression results in the apparent /dev/mem size being 2 bytes smaller than what it actually is. This patch reworks the expression to correctly check the address, while maintaining use of a valid address to __pa(). Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 David Brown 提交于
From: David Brown <davidb@quicinc.com> The ATAG_CORE is allowed to be empty. Although this is handled by parse_tag_core(), __vet_atags during startup rejects this tag unless it contains data. Allow the initial tag to be either the full size, or empty. Signed-off-by: NDavid Brown <davidb@quicinc.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Hartley Sweeten 提交于
EXPORT_* macros should follow immediately after the closing function brace line. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: NKristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/xscaleiop由 Russell King 提交于
Conflicts: MAINTAINERS
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (46 commits) cnic: Fix NETDEV_UP event processing. uvesafb/connector: Disallow unpliviged users to send netlink packets pohmelfs/connector: Disallow unpliviged users to configure pohmelfs dst/connector: Disallow unpliviged users to configure dst dm/connector: Only process connector packages from privileged processes connector: Removed the destruct_data callback since it is always kfree_skb() connector/dm: Fixed a compilation warning connector: Provide the sender's credentials to the callback connector: Keep the skb in cn_callback_data e1000e/igb/ixgbe: Don't report an error if devices don't support AER net: Fix wrong sizeof net: splice() from tcp to pipe should take into account O_NONBLOCK net: Use sk_mark for routing lookup in more places sky2: irqname based on pci address skge: use unique IRQ name IPv4 TCP fails to send window scale option when window scale is zero net/ipv4/tcp.c: fix min() type mismatch warning Kconfig: STRIP: Remove stale bits of STRIP help text NET: mkiss: Fix typo tg3: Remove prev_vlan_tag from struct tx_ring_info ...
-
由 Michael Chan 提交于
This fixes the problem of not handling the NETDEV_UP event properly during hot-plug or modprobe of bnx2 after cnic. The handling was skipped by mistakenly using "else if" to check for the event. Also update version to 2.0.1. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Acked-by: NLars Ellenberg <lars.ellenberg@linbit.com> Acked-by: NEvgeniy Polyakov <zbr@ioremap.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Acked-by: NLars Ellenberg <lars.ellenberg@linbit.com> Acked-by: NEvgeniy Polyakov <zbr@ioremap.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Acked-by: NLars Ellenberg <lars.ellenberg@linbit.com> Acked-by: NEvgeniy Polyakov <zbr@ioremap.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Acked-by: NLars Ellenberg <lars.ellenberg@linbit.com> Acked-by: NEvgeniy Polyakov <zbr@ioremap.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frans Pop 提交于
The only error returned by pci_{en,dis}able_pcie_error_reporting() is -EIO which simply means that Advanced Error Reporting is not supported. There is no need to report that, so remove the error check from e1000e, igb and ixgbe. Signed-off-by: NFrans Pop <elendil@planet.nl> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jean Delvare 提交于
Which is why I have always preferred sizeof(struct foo) over sizeof(var). Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
tcp_splice_read() doesnt take into account socket's O_NONBLOCK flag Before this patch : splice(socket,0,pipe,0,128*1024,SPLICE_F_MOVE); causes a random endless block (if pipe is full) and splice(socket,0,pipe,0,128*1024,SPLICE_F_MOVE | SPLICE_F_NONBLOCK); will return 0 immediately if the TCP buffer is empty. User application has no way to instruct splice() that socket should be in blocking mode but pipe in nonblock more. Many projects cannot use splice(tcp -> pipe) because of this flaw. http://git.samba.org/?p=samba.git;a=history;f=source3/lib/recvfile.c;h=ea0159642137390a0f7e57a123684e6e63e47581;hb=HEAD http://lkml.indiana.edu/hypermail/linux/kernel/0807.2/0687.html Linus introduced SPLICE_F_NONBLOCK in commit 29e35094 (splice: add SPLICE_F_NONBLOCK flag ) It doesn't make the splice itself necessarily nonblocking (because the actual file descriptors that are spliced from/to may block unless they have the O_NONBLOCK flag set), but it makes the splice pipe operations nonblocking. Linus intention was clear : let SPLICE_F_NONBLOCK control the splice pipe mode only This patch instruct tcp_splice_read() to use the underlying file O_NONBLOCK flag, as other socket operations do. Users will then call : splice(socket,0,pipe,0,128*1024,SPLICE_F_MOVE | SPLICE_F_NONBLOCK ); to block on data coming from socket (if file is in blocking mode), and not block on pipe output (to avoid deadlock) First version of this patch was submitted by Octavian Purdila Reported-by: NVolker Lendecke <vl@samba.org> Reported-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NOctavian Purdila <opurdila@ixiacom.com> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Acked-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 10月, 2009 6 次提交
-
-
由 Takashi Iwai 提交于
Don't pass the advanced position to strlcat() but just gives the buffer head position so that the max size limit can be checked correctly. Introduced a new helper function to standaralize strlcat() calls. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The remove callback has to be marked as __devexit, as the dynamic unbind is possible. Reported-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The auto-parser for ALC662/663/272 codecs doesn't work properly when a speaker is connected to mono NID 0x17, and doesn't handle the dynamic DAC assignment properly. This patch fixes the issues and also improves the assignment of DACs so that HP and speakers can have independent volume controls. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Sven Eckelmann 提交于
On Soundblaster X-FI Titenium with emu20k2 the SIDE and SURROUND mute functions are swapped. It was checked with 'speaker-test -c 8 -s 3' and (un)mute surround or 'speaker-test -c 8 -s 7' and (un)mute side. The volume seems not to be affected and works as expected. Signed-off-by: NSven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jean Delvare 提交于
I can't see any reason for struct i2c_driver keywest_driver to not be static. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Daniel T Chen 提交于
BugLink: https://bugs.launchpad.net/bugs/410933 This Sony VAIO model also needs External Amplifier unmuted for audible playback, so make sure we set the inv_eapd quirk. Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-