- 23 6月, 2016 1 次提交
-
-
由 Maor Gottlieb 提交于
The driver exposes interfaces that directly relate to HW state. Upon fatal error, consumers of these interfaces (ULPs) that rely on completion of all their posted work-request could hang, thereby introducing dependencies in shutdown order. To prevent this from happening, we manage the relevant resources (CQs, QPs) that are used by the device. Upon a fatal error, we now generate simulated completions for outstanding WQEs that were not completed at the time the HW was reset. It includes invoking the completion event handler for all involved CQs so that the ULPs will poll those CQs. When polled we return simulated CQEs with IB_WC_WR_FLUSH_ERR return code enabling ULPs to clean up their resources and not wait forever for completions upon receiving remove_one. The above change requires an extra check in the data path to make sure that when device is in error state, the simulated CQEs will be returned and no further WQEs will be posted. Signed-off-by: NMaor Gottlieb <maorg@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 07 6月, 2016 2 次提交
-
-
由 Noa Osherovich 提交于
Verify that number of entries is less than device capability. Add an appropriate warning message for error flow. Fixes: bde51583 ('IB/mlx5: Add support for resize CQ') Signed-off-by: NMajd Dibbiny <majd@mellanox.com> Signed-off-by: NNoa Osherovich <noaos@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Noa Osherovich 提交于
Number of entries shouldn't be greater than the device's max capability. This should be checked before rounding the entries number to power of two. Fixes: 51ee86a4 ('IB/mlx5: Fix check of number of entries...') Signed-off-by: NMajd Dibbiny <majd@mellanox.com> Signed-off-by: NNoa Osherovich <noaos@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Reviewed-by: NSagi Grimberg <sagi@grimberg.me> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 18 5月, 2016 1 次提交
-
-
由 Matan Barak 提交于
Previously, mlx5_ib_cq_comp was executed from interrupt context. Under heavy load, this could cause the CPU core to be in an interrupt context too long. Instead of executing the handler from the interrupt context we execute it from a much friendly tasklet context. Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 02 3月, 2016 2 次提交
-
-
由 Matan Barak 提交于
Mlx5's mkey mechanism is also used for memory windows. The current code base uses MR (memory region) naming, which is inaccurate. Changing MR to mkey in order to represent its different usages more accurately. Signed-off-by: NMatan Barak <matanb@mellanox.com> Reviewed-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Haggai Eran 提交于
The GSI QP emulation requires also emulating completions for transmitted MADs. The CQ on which these completions are generated can also be used by the hardware, and the MAD layer is free to use any CQ of the device for the GSI QP. Add a method for generating software completions to each mlx5 CQ. Software completions are polled first, and generate calls to the completion handler callback if necessary. Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NHaggai Eran <haggaie@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 01 3月, 2016 1 次提交
-
-
由 Erez Shitrit 提交于
The driver checks the csum from the HW when completion arrived and marks it in the wc->wc_flags field for the ulp drivers. These is for packets from type IB_WC_RECV only. Signed-off-by: NErez Shitrit <erezsh@mellanox.com> Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com> Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 22 1月, 2016 1 次提交
-
-
由 Leon Romanovsky 提交于
The create_cq() can receive creation flags which were used differently by two commits which added create_cq extended command and cross-channel. The merged code caused to not accept any flags at all. This patch unifies the check into one function and one return error code. Fixes: 972ecb82 ("IB/mlx5: Add create_cq extended command") Fixes: 051f2630 ("IB/mlx5: Add driver cross-channel support") Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 18 1月, 2016 1 次提交
-
-
由 Doron Tsur 提交于
With several ConnectX-4 cards installed on a server, one may receive irqn > 255 from the kernel API, which we mistakenly trim to 8bit. This causes EQ creation failure with the following stack trace: [<ffffffff812a11f4>] dump_stack+0x48/0x64 [<ffffffff810ace21>] __setup_irq+0x3a1/0x4f0 [<ffffffff810ad7e0>] request_threaded_irq+0x120/0x180 [<ffffffffa0923660>] ? mlx5_eq_int+0x450/0x450 [mlx5_core] [<ffffffffa0922f64>] mlx5_create_map_eq+0x1e4/0x2b0 [mlx5_core] [<ffffffffa091de01>] alloc_comp_eqs+0xb1/0x180 [mlx5_core] [<ffffffffa091ea99>] mlx5_dev_init+0x5e9/0x6e0 [mlx5_core] [<ffffffffa091ec29>] init_one+0x99/0x1c0 [mlx5_core] [<ffffffff812e2afc>] local_pci_probe+0x4c/0xa0 Fixing it by changing of the irqn type from u8 to unsigned int to support values > 255 Fixes: 61d0e73e ('net/mlx5_core: Use the the real irqn in eq->irqn') Reported-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDoron Tsur <doront@mellanox.com> Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 12月, 2015 4 次提交
-
-
由 Leon Romanovsky 提交于
Add support of cross-channel functionality to mlx5 driver. This includes ability to ignore overrun for CQ which intended for cross-channel, export device capability and configure the QP to be sync master/slave queues. The cross-channel enabled QP supports combination of three possible properties: * WQE processing on the receive queue of this QP * WQE processing on the send queue of this QP * WQE are supported on the send queue Reviewed-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Matan Barak 提交于
In order to create a CQ that supports timestamp, mlx5 needs to support the extended create CQ command with the timestamp flag. Signed-off-by: NMatan Barak <matanb@mellanox.com> Reviewed-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Christoph Hellwig 提交于
Remove the unused ib_allow_mw and ib_bind_mw functions, remove the unused IB_WR_BIND_MW and IB_WC_BIND_MW opcodes and move ib_dealloc_mw into the uverbs module. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NSagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core] Reviewed-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Achiad Shochat 提交于
When handling a responder completion, if the link layer is Ethernet, set the work completion network_hdr_type field according to CQE's info and the IB_WC_WITH_NETWORK_HDR_TYPE flag. Signed-off-by: NAchiad Shochat <achiad@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 29 10月, 2015 2 次提交
-
-
由 Sagi Grimberg 提交于
No ULP uses it anymore, go ahead and remove it. Keep only the local invalidate part of the handlers. Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Acked-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Sagi Grimberg 提交于
Support the new memory registration API by allocating a private page list array in mlx5_ib_mr and populate it when mlx5_ib_map_mr_sg is invoked. Also, support IB_WR_REG_MR by setting the exact WQE as IB_WR_FAST_REG_MR, just take the needed information from different places: - page_size, iova, length, access flags (ib_mr) - page array (mlx5_ib_mr) - key (ib_reg_wr) The IB_WR_FAST_REG_MR handlers will be removed later when all the ULPs will be converted. Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Acked-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 04 9月, 2015 1 次提交
-
-
由 Sagi Grimberg 提交于
Since patch series "Demux IB CM requests in the rdma_cm module" the P_Key index is taken from the work completion rather than the message itself. The HCA provides us with the message P_Key. In order to provide the P_Key index, we need to look it up. Given that this is relevant only for GSI messages (session establishments) which is less performance critical, micro-optimize against the GSI (is_qp1) branch. Fixes: 4c21b5bc ("IB/cma: Add net_dev and private data checks to RDMA CM") Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 13 6月, 2015 1 次提交
-
-
由 Matan Barak 提交于
Add a new ib_cq_init_attr structure which contains the previous cqe (minimum number of CQ entries) and comp_vector (completion vector) in addition to a new flags field. All vendors' create_cq callbacks are changed in order to work with the new API. This commit does not change any functionality. Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-By: Devesh Sharma <devesh.sharma@avagotech.com> to patch #2Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 31 5月, 2015 2 次提交
-
-
由 Saeed Mahameed 提交于
- Query all supported types of dev caps on driver load. - Store the Cap data outbox per cap type into driver private data. - Introduce new Macros to access/dump stored caps (using the auto generated data types). - Obsolete SW representation of dev caps (no need for SW copy for each cap). - Modify IB driver to use new macros for checking caps. Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
As David Daney pointed in mlx4_core driver [1], mlx5_core is also misusing the DMA-API. This patch is removing the code that vmap() memory allocated by dma_alloc_coherent(). After this patch, users of this drivers might fail allocating resources on memory fragmeneted systems. This will be fixed later on. [1] - https://patchwork.ozlabs.org/patch/458531/ CC: David Daney <david.daney@cavium.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 4月, 2015 4 次提交
-
-
由 Saeed Mahameed 提交于
Pass consumer index as a parameter to arm CQ Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
Preparation for ethernet driver. These functions will be used in drivers other than mlx5_ib. Signed-off-by: NAchiad Shochat <achiad@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
Signed-off-by: NAchiad Shochat <achiad@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
Do it in one place instead of every where the function is invoked Signed-off-by: NAchiad Shochat <achiad@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 11月, 2014 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Acked-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 10月, 2014 1 次提交
-
-
由 Eli Cohen 提交于
Rearrange struct mlx5_caps so it has a "gen" field to represent the current capabilities configured for the device. Max capabilities can also be queried from the device. Also update capabilities struct to contain more fields as per the latest revision if firmware specification. Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 7月, 2014 2 次提交
-
-
由 Jack Morgenstein 提交于
There were many places where parameters which should be u8/u16 were integer type. Additionally, in 2 places, a check for a non-null pointer was added before dereferencing the pointer (this is actually a bug fix). Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jack Morgenstein 提交于
In preparation for a new mlx5 device which is VPI (i.e., ports can be either IB or ETH), move the pci device functionality from mlx5_ib to mlx5_core. This involves the following changes: 1. Move mlx5_core_dev struct out of mlx5_ib_dev. mlx5_core_dev is now an independent structure maintained by mlx5_core. mlx5_ib_dev now has a pointer to that struct. This requires changing a lot of places where the core_dev struct was accessed via mlx5_ib_dev (now, this needs to be a pointer dereference). 2. All PCI initializations are now done in mlx5_core. Thus, it is now mlx5_core which does pci_register_device (and not mlx5_ib, as was previously). 3. mlx5_ib now registers itself with mlx5_core as an "interface" driver. This is very similar to the mechanism employed for the mlx4 (ConnectX) driver. Once the HCA is initialized (by mlx5_core), it invokes the interface drivers to do their initializations. 4. There is a new event handler which the core registers: mlx5_core_event(). This event handler invokes the event handlers registered by the interfaces. Based on a patch by Eli Cohen <eli@mellanox.com> Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 5月, 2014 1 次提交
-
-
由 Yann Droneaud 提交于
The i386 ABI disagrees with most other ABIs regarding alignment of data type larger than 4 bytes: on most ABIs a padding must be added at end of the structures, while it is not required on i386. So for most ABI struct mlx5_ib_create_cq get padded to be aligned on a 8 bytes multiple, while for i386, such padding is not added. The tool pahole can be used to find such implicit padding: $ pahole --anon_include \ --nested_anon_include \ --recursive \ --class_name mlx5_ib_create_cq \ drivers/infiniband/hw/mlx5/mlx5_ib.o Then, structure layout can be compared between i386 and x86_64: +++ obj-i386/drivers/infiniband/hw/mlx5/mlx5_ib.o.pahole.txt 2014-03-28 11:43:07.386413682 +0100 --- obj-x86_64/drivers/infiniband/hw/mlx5/mlx5_ib.o.pahole.txt 2014-03-27 13:06:17.788472721 +0100 @@ -34,9 +34,8 @@ struct mlx5_ib_create_cq { __u64 db_addr; /* 8 8 */ __u32 cqe_size; /* 16 4 */ - /* size: 20, cachelines: 1, members: 3 */ - /* last cacheline: 20 bytes */ + /* size: 24, cachelines: 1, members: 3 */ + /* padding: 4 */ + /* last cacheline: 24 bytes */ }; This ABI disagreement will make an x86_64 kernel try to read past the buffer provided by an i386 binary. When boundary check will be implemented, a x86_64 kernel will refuse to read past the i386 userspace provided buffer and the uverb will fail. Anyway, if the structure lies in memory on a page boundary and next page is not mapped, ib_copy_from_udata() will fail when trying to read the 4 bytes of padding and the uverb will fail. This patch makes create_cq_user() takes care of the input data size to handle the case where no padding is provided. This way, x86_64 kernel will be able to handle struct mlx5_ib_create_cq as sent by unpatched and patched i386 libmlx5. Link: http://marc.info/?i=cover.1399309513.git.ydroneaud@opteya.com Cc: <stable@vger.kernel.org> Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapter") Signed-off-by: NYann Droneaud <ydroneaud@opteya.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 08 3月, 2014 1 次提交
-
-
由 Sagi Grimberg 提交于
This commit takes care of the generated signature error CQE generated by the HW (if happened). The underlying mlx5 driver will handle signature error completions and will mark the relevant memory region as dirty. Once the consumer gets the completion for the transaction, it must check for signature errors on signature memory region using a new lightweight verb ib_check_mr_status(). In case the user doesn't check for signature error (i.e. doesn't call ib_check_mr_status() with status check IB_MR_CHECK_SIG_STATUS), the memory region cannot be used for another signature operation (REG_SIG_MR work request will fail). Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 23 1月, 2014 3 次提交
-
-
由 Eli Cohen 提交于
Verify that reserved fields in struct mlx5_ib_resize_cq are cleared before continuing execution of the verb. This is required to allow making use of this area in future revisions. Signed-off-by: NYann Droneaud <ydroneaud@opteya.com> Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Eli Cohen 提交于
Implement resize CQ which is a mandatory verb in mlx5. Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Eli Cohen 提交于
Modify CQ is used by ULPs like IPoIB to change moderation parameters. This patch adds support in mlx5. Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 16 11月, 2013 1 次提交
-
-
由 Eli Cohen 提交于
When creating a CQ, we must use mlx5 adapter page shift. Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 09 11月, 2013 4 次提交
-
-
由 Eli Cohen 提交于
The Connect-IB adapter has an inherent page size which equals 4K. Define an new enum that equals the page shift and use it instead of using the value 12 throughout the code. Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Eli Cohen 提交于
Connect-IB firmware requires 4K pages to be communicated with the driver. This patch breaks larger pages to 4K units to enable support for architectures utilizing larger page size, such as PowerPC. This patch also fixes several places that referred to PAGE_SHIFT instead of explicit 12 which is the inherent page shift on Connect-IB. Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Moshe Lazer 提交于
On destroy QP the driver walks over the relevant CQ and removes CQEs reported for the destroyed QP. It also frees the related SRQ entry without checking that this is actually an SRQ-related CQE. In case of a CQ used for both send and receive QP, we could free SRQ entries for send CQEs. This patch resolves this issue by verifying that this is a SRQ related CQE by checking the SRQ number in the CQE is not zero. Signed-off-by: NMoshe Lazer <moshel@mellanox.com> Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Eli Cohen 提交于
Verify that the value is non negative before rounding up to power of 2. Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 09 7月, 2013 1 次提交
-
-
由 Eli Cohen 提交于
The driver is comprised of two kernel modules: mlx5_ib and mlx5_core. This partitioning resembles what we have for mlx4, except that mlx5_ib is the pci device driver and not mlx5_core. mlx5_core is essentially a library that provides general functionality that is intended to be used by other Mellanox devices that will be introduced in the future. mlx5_ib has a similar role as any hardware device under drivers/infiniband/hw. Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> [ Merge in coccinelle fixes from Fengguang Wu <fengguang.wu@intel.com>. - Roland ] Signed-off-by: NRoland Dreier <roland@purestorage.com>
-