task #25552995

commit f46f27a576cc3b1e3d45ea50bc06287aa46b04b2 upstream.

Commit bd82d4bd2188 ("arm64: Fix incorrect irqflag restore for priority
masking") added a macro to the entry.S call paths that leave the
PSTATE.I bit set. This tells the pPNMI masking logic that interrupts
are masked by the CPU, not by the PMR. This value is read back by
local_daif_save().

Commit bd82d4bd2188 added this call to el0_svc, as el0_svc_handler
is called with interrupts masked. el0_svc_compat was missed, but should
be covered in the same way as both of these paths end up in
el0_svc_common(), which expects to unmask interrupts.

Fixes: bd82d4bd2188 ("arm64: Fix incorrect irqflag restore for priority masking")
Signed-off-by: NJames Morse <james.morse@arm.com>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Signed-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

Fix #25552995

commit 48ce8f80f5901f1f031b00be66d659d39f33b0a1 upstream.

Using IRQ priority masking to enable/disable interrupts is a bit
sensitive as it requires to deal with both ICC_PMR_EL1 and PSR.I.

Introduce some validity checks to both highlight the states in which
functions dealing with IRQ enabling/disabling can (not) be called, and
bark a warning when called in an unexpected state.

Since these checks are done on hotpaths, introduce a build option to
choose whether to do the checking.

Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit bd82d4bd21880b7c4d5f5756be435095d6ae07b5 upstream.

When using IRQ priority masking to disable interrupts, in order to deal
with the PSR.I state, local_irq_save() would convert the I bit into a
PMR value (GIC_PRIO_IRQOFF). This resulted in local_irq_restore()
potentially modifying the value of PMR in undesired location due to the
state of PSR.I upon flag saving [1].

In an attempt to solve this issue in a less hackish manner, introduce
a bit (GIC_PRIO_IGNORE_PMR) for the PMR values that can represent
whether PSR.I is being used to disable interrupts, in which case it
takes precedence of the status of interrupt masking via PMR.

GIC_PRIO_PSR_I_SET is chosen such that (<pmr_value> |
GIC_PRIO_PSR_I_SET) does not mask more interrupts than <pmr_value> as
some sections (e.g. arch_cpu_idle(), interrupt acknowledge path)
requires PMR not to mask interrupts that could be signaled to the
CPU when using only PSR.I.

[1] https://www.spinics.net/lists/arm-kernel/msg716956.html

Fixes: 4a503217ce37 ("arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking")
Cc: <stable@vger.kernel.org> # 5.1.x-
Reported-by: NZenghui Yu <yuzenghui@huawei.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Pouloze <suzuki.poulose@arm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit 17ce302f3117e9518395847a3120c8a108b587b8 upstream.

In the presence of any form of instrumentation, nmi_enter() should be
done before calling any traceable code and any instrumentation code.

Currently, nmi_enter() is done in handle_domain_nmi(), which is much
too late as instrumentation code might get called before. Move the
nmi_enter/exit() calls to the arch IRQ vector handler.

On arm64, it is not possible to know if the IRQ vector handler was
called because of an NMI before acknowledging the interrupt. However, It
is possible to know whether normal interrupts could be taken in the
interrupted context (i.e. if taking an NMI in that context could
introduce a potential race condition).

When interrupting a context with IRQs disabled, call nmi_enter() as soon
as possible. In contexts with IRQs enabled, defer this to the interrupt
controller, which is in a better position to know if an interrupt taken
is an NMI.

Fixes: bc3c03ccb464 ("arm64: Enable the support of pseudo-NMIs")
Cc: <stable@vger.kernel.org> # 5.1.x-
Cc: Will Deacon <will.deacon@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit f57065782f245ca96f1472209a485073bbc11247 upstream.

Some of the inline assembly instruction use the condition flags and need
to include "cc" in the clobber list.

Fixes: 4a503217ce37 ("arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking")
Cc: <stable@vger.kernel.org> # 5.1.x-
Suggested-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit 19c36b185a1d13f79f3a382e08695a2633155e5a upstream.

Flags are only read by the instructions doing the irqflags restore
operation. Pass the operand as read only to the asm inline instead of
read-write.

Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NMark Rutland <mark.rutland@ar.com>
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit be604c616ca71cbf5c860d0cfa4595128ab74189 upstream.

Clang's integrated assembler does not allow assembly macros defined
in one inline asm block using the .macro directive to be used across
separate asm blocks. LLVM developers consider this a feature and not a
bug, recommending code refactoring:

  https://bugs.llvm.org/show_bug.cgi?id=19749

As binutils doesn't allow macros to be redefined, this change uses
UNDEFINE_MRS_S and UNDEFINE_MSR_S to define corresponding macros
in-place and workaround gcc and clang limitations on redefining macros
across different assembler blocks.

Specifically, the current state after preprocessing looks like this:

asm volatile(".macro mXX_s ... .endm");
void f()
{
	asm volatile("mXX_s a, b");
}

With GCC, it gives macro redefinition error because sysreg.h is included
in multiple source files, and assembler code for all of them is later
combined for LTO (I've seen an intermediate file with hundreds of
identical definitions).

With clang, it gives macro undefined error because clang doesn't allow
sharing macros between inline asm statements.

I also seem to remember catching another sort of undefined error with
GCC due to reordering of macro definition asm statement and generated
asm code for function that uses the macro.

The solution with defining and undefining for each use, while certainly
not elegant, satisfies both GCC and clang, LTO and non-LTO.
Co-developed-by: NAlex Matveev <alxmtvv@gmail.com>
Co-developed-by: NYury Norov <ynorov@caviumnetworks.com>
Co-developed-by: NSami Tolvanen <samitolvanen@google.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit a80554fc36ba41d96af8e72fb54cd5d490e06c54 upstream

Clang complains when passing asm operands that are smaller than the
registers they are mapped to:

arch/arm64/include/asm/irqflags.h:50:10: warning: value size does not
	match register size specified by the constraint and modifier
	[-Wasm-operand-widths]
                : "r" (GIC_PRIO_IRQON)

Fix it by casting the affected input operands to a type of the correct
size.
Reported-by: NNathan Chancellor <natechancellor@gmail.com>
Tested-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit bc3c03ccb4641fb940b27a0d369431876923a8fe upstream

Add a build option and a command line parameter to build and enable the
support of pseudo-NMIs.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Suggested-by: NDaniel Thompson <daniel.thompson@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

add PSEUDO_NMI configuration item
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit c25349fd3c8024cfebcc9b01ee6cfb093fab9be0 upstream

When an NMI is raised while interrupts where disabled, the IRQ tracing
already is in the correct state (i.e. hardirqs_off) and should be left
as such when returning to the interrupted context.

Check whether PMR was masking interrupts when the NMI was raised and
skip IRQ tracing if necessary.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit 1234ad686fb1bde5a9c2447fc4c9df8430358763 upstream

Handling of an NMI should not set any TIF flags. For NMIs received from
EL0 the current exit path is safe to use.

However, an NMI received at EL1 could have interrupted some task context
that has set the TIF_NEED_RESCHED flag. Preempting a task should not
happen as a result of an NMI.

Skip preemption after handling an NMI from EL1.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit 7d31464adf20fb8c075a3a3dfe2002a195566510 upstream

Per definition of the daifflags, Serrors can occur during any interrupt
context, that includes NMI contexts. Trying to nmi_enter in an nmi context
will crash.

Skip nmi_enter/nmi_exit when serror occurred during an NMI.
Suggested-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit 101b35f7def1775bf589d86676983bc359843916 upstream

Implement NMI callbacks for GICv3 irqchip. Install NMI safe handlers
when setting up interrupt line as NMI.

Only SPIs and PPIs are allowed to be set up as NMI.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit f32c926651dcd1683f4d896ee52609000a62a3dc upstream

Provide a higher priority to be used for pseudo-NMIs. When such an
interrupt is received, keep interrupts fully disabled at CPU level to
prevent receiving other pseudo-NMIs while handling the current one.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit d98d0a990ca1446d3c0ca8f0b9ac127a66e40cdf upstream

The values non secure EL1 needs to use for PMR and RPR registers depends on
the value of SCR_EL3.FIQ.

The values non secure EL1 sees from the distributor and redistributor
depend on whether security is enabled for the GIC or not.

To avoid having to deal with two sets of values for PMR
masking/unmasking, only enable pseudo-NMIs when GIC has non-secure view
of priorities.

Also, add firmware requirements related to SCR_EL3.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit b334481ab76b2a9031aef5393b07de6d21a08244 upstream

Implement architecture specific primitive allowing the GICv3 driver to
use priorities to mask interrupts.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Suggested-by: NDaniel Thompson <daniel.thompson@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit e79321883842ca7b77d8a58fe8303e8da35c085e upstream

Once the boot CPU has been prepared or a new secondary CPU has been
brought up, use ICC_PMR_EL1 to mask interrupts on that CPU and clear
PSR.I bit.

Since ICC_PMR_EL1 is initialized at CPU bringup, avoid overwriting
it in the GICv3 driver.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Suggested-by: NDaniel Thompson <daniel.thompson@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit b5cf607370d0ee257e4bfa80740952fa6110c2c7 upstream

The code to detect whether Linux has access to group0 interrupts can
prove useful in other parts of the driver.

Provide a separate function to do this.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit 0ceb0d56905e3d141fae77e5936d00eee9233473 upstream

Currently alternatives are applied very late in the boot process (and
a long time after we enable scheduling). Some alternative sequences,
such as those that alter the way CPU context is stored, must be applied
much earlier in the boot sequence.

Introduce apply_boot_alternatives() to allow some alternatives to be
applied immediately after we detect the CPU features of the boot CPU.
Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org>
[julien.thierry@arm.com: rename to fit new cpufeature framework better,
			 apply BOOT_SCOPE feature early in boot]
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit e9ab7a2e333615497b3fc426c379c330230c2b50 upstream

In preparation for the application of alternatives at different points
during the boot process, provide the possibility to check whether
alternatives for a feature of interest was already applied instead of
having a global boolean for all alternatives.

Make VHE enablement code check for the VHE feature instead of considering
all alternatives.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Marc Zyngier <Marc.Zyngier@arm.com>
Cc: Christoffer Dall <Christoffer.Dall@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit 8cb7eff32cc00697d4a37b1ed569c72ee2039ca4 upstream

The addition of PMR should not bypass the semantics of daifflags.

When DA_F are set, I bit is also set as no interrupts (even of higher
priority) is allowed.

When DA_F are cleared, I bit is cleared and interrupt enabling/disabling
goes through ICC_PMR_EL1.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit 4a503217ce37e1f4f3d9b681bbcbbac103776bf1 upstream

Instead disabling interrupts by setting the PSR.I bit, use a priority
higher than the one used for interrupts to mask them via PMR.

When using PMR to disable interrupts, the value of PMR will be used
instead of PSR.[DAIF] for the irqflags.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Suggested-by: NDaniel Thompson <daniel.thompson@linaro.org>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit 13b210ddf474d9f3368766008a89fe82a6f90b48 upstream

Currently, irqflags are saved before calling runtime services and
checked for mismatch on return.

Provide a pair of overridable macros to save and restore (if needed) the
state that need to be preserved on return from a runtime service.
This allows to check for flags that are not necesarly related to
irqflags.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: linux-efi@vger.kernel.org
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit 85738e05dc38a80921e1e1944e5b835f6668fc30 upstream

Interrupts masked by ICC_PMR_EL1 will not be signaled to the CPU. This
means that hypervisor will not receive masked interrupts while running a
guest.

We need to make sure that all maskable interrupts are masked from the
time we call local_irq_disable() in the main run loop, and remain so
until we call local_irq_enable() after returning from the guest, and we
need to ensure that we see no interrupts at all (including pseudo-NMIs)
in the middle of the VM world-switch, while at the same time we need to
ensure we exit the guest when there are interrupts for the host.

We can accomplish this with pseudo-NMIs enabled by:
  (1) local_irq_disable: set the priority mask
  (2) enter guest: set PSTATE.I
  (3)              clear the priority mask
  (4) eret to guest
  (5) exit guest:  set the priotiy mask
                   clear PSTATE.I (and restore other host PSTATE bits)
  (6) local_irq_enable: clear the priority mask.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit a9806aa259feb2f6fd582b6342c835a3482fccc6 upstream

CPU does not received signals for interrupts with a priority masked by
ICC_PMR_EL1. This means the CPU might not come back from a WFI
instruction.

Make sure ICC_PMR_EL1 does not mask interrupts when doing a WFI.

Since the logic of cpu_do_idle is becoming a bit more complex than just
two instructions, lets turn it from ASM to C.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Suggested-by: NDaniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit 133d05186325ce04494ea6488a6b86e50a446c12 upstream

In order to replace PSR.I interrupt disabling/enabling with ICC_PMR_EL1
interrupt masking, ICC_PMR_EL1 needs to be saved/restored when
taking/returning from an exception. This mimics the way hardware saves
and restores PSR.I bit in spsr_el1 for exceptions and ERET.

Add PMR to the registers to save in the pt_regs struct upon kernel entry,
and restore it before ERET. Also, initialize it to a sane value when
creating new tasks.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit cdbc81ddef43c8fdcbd3a26e1a7530c70b629cfc upstream

Introduce fixed values for PMR that are going to be used to mask and
unmask interrupts by priority.

The current priority given to GIC interrupts is 0xa0, so clearing PMR's
most significant bit is enough to mask interrupts.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Suggested-by: NDaniel Thompson <daniel.thompson@linaro.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit 3f1f3234bc2db1c16b9818b9a15a5d58ad45251c upstream

Mask the IRQ priority through PMR and re-enable IRQs at CPU level,
allowing only higher priority interrupts to be received during interrupt
handling.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit e99da7c6f51b487280406d8dc31cc7532cfb2017 upstream

Add helper functions to access system registers related to interrupt
priorities: PMR and RPR.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

Add a cpufeature indicating whether a cpu supports masking interrupts
by priority.

The feature will be properly enabled in a later patch.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

[ Shile: fixed conflicts in arch/arm64/include/asm/cpucaps.h ]
Signed-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>

task #25552995

commit c9bfdf734d4c0e7dc25f39dd636ba1952994865a upstream

It is not supported to have some CPUs using GICv3 sysreg CPU interface
while some others do not.

Once ICC_SRE_EL1.SRE is set on a CPU, the bit cannot be cleared. Since
matching this feature require setting ICC_SRE_EL1.SRE, it cannot be
turned off if found on a CPU.

Set the feature as STRICT_BOOT, if boot CPU has it, all other CPUs are
required to have it.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Suggested-by: NDaniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit a82785a953e03444fe38616aed4d27b01da79a97 upstream

There are some helpers to modify PSR.[DAIF] bits that are not referenced
anywhere. The less these bits are available outside of local_irq_*
functions the better.

Get rid of those unused helpers.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit 6e4933a006616343f66c4702dc4fc56bb25e7b02 upstream

NMI handling code should be executed between calls to nmi_enter and
nmi_exit.

Add a separate domain handler to properly setup NMI context when handling
an interrupt requested as NMI.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit 2dcf1fbcad352baaa5f47b17e57c5743c8eedbad upstream

Provide flow handlers that are NMI safe for interrupts and percpu_devid
interrupts.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit 4b078c3f1a26487c39363089ba0d5c6b09f2a89f upstream

Add support for percpu_devid interrupts treated as NMIs.

Percpu_devid NMIs need to be setup/torn down on each CPU they target.

The same restrictions as for global NMIs still apply for percpu_devid NMIs.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

[ Shile: fixed conflicts in include/linux/interrupt.h ]
Signed-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>

task #25552995

commit b525903c254dab2491410f0f23707691b7c2c317 upstream

Add functionality to allocate interrupt lines that will deliver IRQs
as Non-Maskable Interrupts. These allocations are only successful if
the irqchip provides the necessary support and allows NMI delivery for the
interrupt line.

Interrupt lines allocated for NMI delivery must be enabled/disabled through
enable_nmi/disable_nmi_nosync to keep their state consistent.

To treat a PERCPU IRQ as NMI, the interrupt must not be shared nor threaded,
the irqchip directly managing the IRQ must be the root irqchip and the
irqchip cannot be behind a slow bus.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit f05692919bdd44ad2a1a1fe85222dec16fec7e80 upstream.

Some of the work done in daifflags save/restore is already provided
by irqflags functions. Daifflags should always be a superset of irqflags
(it handles irq status + status of other flags). Modifying behaviour of
irqflags should alter the behaviour of daifflags.

Use irqflags_save/restore functions for the corresponding daifflags
operation.
Reviewed-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit 2130b789b3ef6a518b9c9c6f245642620e2b0c0c upstream.

LPIs use the same priority value as other GIC interrupts.

Make the GIC default priority definition visible to ITS implementation
and use this same definition for LPI priorities.
Tested-by: NDaniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>

task #25552995

commit 342677d70ab92142b483fc68bcade74cdf969785 upstream.

Multiple interrupts pending for a CPU is actually rare. Doing an
acknowledge loop does not give much better performance or even can
deteriorate them.

Do not loop when an interrupt has been acknowledged, just return
from interrupt and wait for another one to be raised.
Tested-by: NDaniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>