- 25 1月, 2007 2 次提交
-
-
由 Ralf Baechle 提交于
Definitions for TIF_FREEZE and _TIF_FREEZE were missing. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Alexey Dobriyan 提交于
Gcc major version number is in __GNUC__. As side effect fix checking with sparse if sparse was built with gcc 4.1 and mips cross-compiler is 3.4. Sparse will inherit version 4.1, __GNUC__ won't be filtered from "-dM -E -xc" output, sparse will pick only new major, effectively becoming gcc version 3.1 which is unsupported. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 24 1月, 2007 19 次提交
-
-
由 Oleg Nesterov 提交于
We are doing ->buf_prepare(buf) before adding buf to q->stream list. This means that videobuf_qbuf() should not try to re-add a STATE_PREPARED buffer. Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Linus Torvalds 提交于
This changes a few mentions of my email address to point to the new one, leaving things like old copyright messages alone. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Hemminger 提交于
Change my email address to reflect OSDL merger. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> [ The irony. Somebody still has his sign-off message hardcoded in a script or his brainstem ;^] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Any newly added irq handler may obviously make any old spurious irq status invalid, since the new handler may well be the thing that is supposed to handle any interrupts that came in. So just clear the statistics when adding handlers. Pointed-out-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Vr41xx: Fix after GENERIC_HARDIRQS_NO__DO_IRQ change [MIPS] SMTC: Instant IPI replay.
-
由 Guy Streeter 提交于
As written, sys_shmget will return ENOSPC when one page is still available for allocation. This patch corrects the test. Signed-off-by: NGuy Streeter <guy.streeter+lkml@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> --
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/ehca: Fix mismatched spin_unlock in irq handler IB/ehca: Fix improper use of yield() with spinlock held IB/srp: Check match_strdup() return
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
memset() after kmalloc() on size * 8 would better be on size * 8, not just size; fixed by switching to kcalloc() - it's more idiomatic anyway. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ingo Molnar 提交于
while lock-profiling the -rt kernel i noticed weird contention during mmap-intense workloads, and the tracer showed the following gem, in one of our MM hotpaths: threaded-2771 1.... 65us : sys_munmap (sysenter_do_call) threaded-2771 1.... 66us : profile_munmap (sys_munmap) threaded-2771 1.... 66us : blocking_notifier_call_chain (profile_munmap) threaded-2771 1.... 66us : rt_down_read (blocking_notifier_call_chain) ouch! a global rw-semaphore taken in one of the most performance- sensitive codepaths of the kernel. And i dont even have oprofile enabled! All distro kernels have CONFIG_PROFILING enabled, so this scalability problem affects the majority of Linux users. The fix is to enhance blocking_notifier_call_chain() to only take the lock if there appears to be work on the call-chain. With this patch applied i get nicely saturated system, and much higher munmap performance, on SMP systems. And as a bonus this also fixes a similar scalability bottleneck in the thread-exit codepath: profile_task_exit() ... Signed-off-by: NIngo Molnar <mingo@elte.hu> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NNick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: [ALSA] Repair snd-usb-usx2y over OHCI
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: NetXen: Use pci_register_driver() instead of pci_module_init() in init_module NetXen: Firmware check modifications ehea: Fixed possible nullpointer access ehea: Added logging off associated errors ehea: Improved logging of permission issues ehea: New method to determine number of available ports ehea: Modified initial autoneg state determination ehea: Fixing firmware queue config issue ehea: Fixed wrong dereferencation PHY: Export phy ethtool helpers modify 3c589_cs to be SMP safe
-
由 Linus Torvalds 提交于
* 'ftape' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: more ftape removal
-
由 Linus Torvalds 提交于
* 'kill-jffs-prep' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: Note that JFFS (v1) is to be deleted, in feature-removal-schedule.txt
-
由 Linas Vepstas 提交于
A flag was recently added to the elevator code to avoid performing an unplug when reuests are being re-queued. The goal of this flag was to avoid a deep recursion that can occur when re-queueing requests after a SCSI device/host reset. See http://lkml.org/lkml/2006/5/17/254 However, that fix added the flag near the bottom of a case statement, where an earlier break (in an if statement) could transport one out of the case, without setting the flag. This patch sets the flag earlier in the case statement. I re-discovered the deep recursion recently during testing; I was told that it was a known problem, and the fix to it was in the kernel I was testing. Indeed it was ... but it didn't fix the bug. With the patch below, I no longer see the bug. Signed-off by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: NJens Axboe <axboe@suse.de> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yoichi Yuasa 提交于
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
SMTC pseudo-interrupts between TCs are deferred and queued if the target TC is interrupt-inhibited (IXMT). In the first SMTC prototypes, these queued IPIs were serviced on return to user mode, or on entry into the kernel idle loop. The INSTANT_REPLAY option dispatches them as part of local_irq_restore() processing, which adds runtime overhead (hence the option to turn it off), but ensures that IPIs are handled promptly even under heavy I/O interrupt load. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 23 1月, 2007 19 次提交
-
-
由 Jeff Chua 提交于
Seems to be some left-over debug code. Cc: Len Brown <lenb@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Horms 提交于
this patch fills in the portions for ia64 kexec. Signed-off-by: NSimon Horman <horms@verge.net.au> Cc: "Zou, Nanhai" <nanhai.zou@intel.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Horms 提交于
Mohan Kumar suggested making kexec-tools-testing.tar.gz a link to the latest version. I have done this and this patch updates the documentation accordingly. Signed-off-by: NSimon Horman <horms@verge.net.au> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Saveliev 提交于
This patch fixes a confusion reiserfs has for a long time. On release file operation reiserfs used to try to pack file data stored in last incomplete page of some files into metadata blocks. After packing the page got cleared with clear_page_dirty. It did not take into account that the page may be mmaped into other process's address space. Recent replacement for clear_page_dirty cancel_dirty_page found the confusion with sanity check that page has to be not mapped. The patch fixes the confusion by making reiserfs avoid tail packing if an inode was ever mmapped. reiserfs_mmap and reiserfs_file_release are serialized with mutex in reiserfs specific inode. reiserfs_mmap locks the mutex and sets a bit in reiserfs specific inode flags. reiserfs_file_release checks the bit having the mutex locked. If bit is set - tail packing is avoided. This eliminates a possibility that mmapped page gets cancel_page_dirty-ed. Signed-off-by: NVladimir Saveliev <vs@namesys.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <mason@suse.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
Currently one can specify an arbitrary node mask to mbind that includes nodes not allowed. If that is done with an interleave policy then we will go around all the nodes. Those outside of the currently allowed cpuset will be redirected to the border nodes. Interleave will then create imbalances at the borders of the cpuset. This patch restricts the nodes to the currently allowed cpuset. The RFC for this patch was discussed at http://marc.theaimsgroup.com/?t=116793842100004&r=1&w=2Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: Paul Jackson <pj@sgi.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mark Gross 提交于
The following patch fixes a few problems with the tlclk driver. * bug in the select_amcb1_transmit_clock * racy read sys call * racy open sys call * use of add_timer where mod_timer would be better * change to the timer data parameter use Signed-off-by: NMark Gross <mark.gross@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chen, Kenneth W 提交于
For large size DIO that needs multiple bio, one full page worth of data was lost at the boundary of bio's maximum sector or segment limits. After a bio is full and got submitted. The outer while (nbytes) { ... } loop will allocate a new bio and just march on to index into next page. It just forgets about the page that bio_add_page() rejected when previous bio is full. Fix it by put the rejected page back to pvec so we pick it up again for the next bio. Signed-off-by: NKen Chen <kenneth.w.chen@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jamie Lenehan 提交于
This fixes the SH rtc driver correctly act on the "enabled" flag when setting an alarm. Signed-off-by: NJamie Lenehan <lenehan@twibble.org> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <alessandro.zummo@towertech.it> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Avi Kivity 提交于
If a page is marked as dirty in the guest pte, set_pte_common() can set the writable bit on newly-instantiated shadow pte. This optimization avoids a write fault after the initial read fault. However, if a write fault instantiates the pte, fix_write_pf() incorrectly reports the fault as a guest page fault, and the guest oopses on what appears to be a correctly-mapped page. Fix is to detect the condition and only report a guest page fault on a user access to a kernel page. With the fix, a kvm guest can survive a whole night of running the kernel hacker's screensaver (make -j9 in a loop). Signed-off-by: NAvi Kivity <avi@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Avi Kivity 提交于
The various bit string instructions (bts, btc, etc.) fail to adjust the address correctly if the bit address is beyond BITS_PER_LONG. This bug creeped in as the emulator originally relied on cr2 to contain the memory address; however we now decode it from the mod r/m bits, and must adjust the offset to account for large bit indices. The patch is rather large because it switches src and dst decoding around, so that the bit index is available when decoding the memory address. This fixes workloads like the FC5 installer. Signed-off-by: NAvi Kivity <avi@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Avi Kivity 提交于
The kvm mmio read path looks like: 1. guest read faults 2. kvm emulates read, calls emulator_read_emulated() 3. fails as a read requires userspace help 4. exit to userspace 5. userspace emulates read, kvm sets vcpu->mmio_read_completed 6. re-enter guest, fault again 7. kvm emulates read, calls emulator_read_emulated() 8. succeeds as vcpu->mmio_read_emulated is set 9. instruction completes and guest is resumed A problem surfaces if the userspace exit (step 5) also requests an interrupt injection. In that case, the guest does not re-execute the original instruction, but the interrupt handler. The next time an mmio read is exectued (likely for a different address), step 3 will find vcpu->mmio_read_completed set and return the value read for the original instruction. The problem manifested itself in a few annoying ways: - little squares appear randomly on console when switching virtual terminals - ne2000 fails under nfs read load - rtl8139 complains about "pci errors" even though the device model is incapable of issuing them. Fix by skipping interrupt injection if an mmio read is pending. A better fix is to avoid re-entry into the guest, and re-emulating immediately instead. However that's a bit more complex. Signed-off-by: NAvi Kivity <avi@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Avi Kivity 提交于
This makes the vmwrite errors on vm shutdown go away. Signed-off-by: NAvi Kivity <avi@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ingo Molnar 提交于
The paravirt subsystem is still in flux so all exports from it are definitely internal use only. The APIs around this /will/ change. Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@suse.de> Cc: Zachary Amsden <zach@vmware.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Sing the praises of `gcc -W'. Would have prevented that blockdev direct-IO bug. Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
size_t is unsigned. IO errors aren't getting through. Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Venkatesh Pallipadi 提交于
Commit f2802e7f and its x86 version (b7471c6d) adds nmi_known_cpu() check while parsing boot options in x86_64 and i386. With that, "nmi_watchdog=2" stops working for me on Intel Core 2 CPU based system. The problem is, setup_nmi_watchdog is called while parsing the boot option and identify_cpu is not done yet. So, the return value of nmi_known_cpu() is not valid at this point. So revert that check. This should not have any adverse effect as the nmi_known_cpu() check is done again later in enable_lapic_nmi_watchdog(). Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Andi Kleen <ak@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
export profile_hits() on !SMP too. Cc: Ingo Molnar <mingo@elte.hu> Cc: Avi Kivity <avi@qumranet.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Karsten Wiese 提交于
The previous patch 'Repair snd-usb-usx2y for usb 2.6.18' assumed urb->start_frame roll over beyond MAX_INT for both UHCI & OHCI. This isn't true until now (kernel 2.6.20). Fix this by only looking at the common between OHCI & UHCI Frame number range. This is for mainline and stable kernels >= 2.6.18. Signed-off-by: NKarsten Wiese <fzu@wemgehoertderstaat.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Amit S. Kale 提交于
This will use pci_register_driver() instead of pci_module_init(). Signed-off-by: NAmit S. Kale <amitkale@netxen.com> Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-