The storage driver (storvsc_drv.c) handles all block storage devices
assigned to Linux guests hosted on Hyper-V. This driver has been in the
staging tree for a while and this patch moves it out of the staging area.

James was willing to apply this patch during the 3.3-rc phase and a decision
was taken to defer this to 3.4 since Greg had queued up a bunch of storvsc
patches for 3.4. Now that Greg has applied all of the pending storvsc patches,
I am sending this patch to move this driver out of staging. Based on James'
recommendation, this patch gets rid of the unneeded files in the staging/hv
directory.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Acked-by: NJames Bottomley <JBottomley@Parallels.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Bump the version now that the driver has atapi support and the initial
round of hotplug fixes.  The EXPERIMENTAL tag should have been removed a
while back.  While we're here also kill the "select SCSI_SAS_HOST_SMP"
as the build error was separately fixed by commit d962480e "[SCSI]
libsas: fix try_test_sas_gpio_gp_bit() build error".
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

SCSI_ISCI needs to select SCSI_SAS_HOST_SMP to ensure that all
needed symbols are available to it.

Fixes this build error:

  ERROR: "try_test_sas_gpio_gp_bit" [drivers/scsi/isci/isci.ko] undefined!
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

DIF/DIX support for zfcp is no longer experimental,
and config option is no longer necessary.
Return error from queuecommand for unsupported data directions.
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

	The Marvell Universal Message Interface (UMI) defines a messaging
interface between host and Marvell products (Plato, for example). It
considers situations of limited system resource and optimized system
performance.
	UMI driver translates host request to message and sends message
to FW via UMI, FW receives message and processes it, then sends response
to UMI driver.
	FW generates an interrupt when it needs to send information or
response to UMI driver
Signed-off-by: NJianyun Li <jyli@marvell.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

This patch adds bsg support to the iscsi class. There is only
1 request, the host vendor one, supported. It is expected that
this would be used for things like flash updates.

This patch is made over this one
http://marc.info/?l=linux-scsi&m=131149780020992&w=2Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Pre-production silicon support is deprecated, and will be removed
completely in the future.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Now that phys_to_virt() and virt_to_phys() have been removed we are no
longer violating the dma mapping (or kmap apis).
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Support for the up to 2x4-port 6Gb/s SAS controllers embedded in the
chipset.

This is a snapshot of the first publicly available version of the driver,
commit 4c1db2d0 in the 'historical' branch.

   git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git historical
Signed-off-by: NMaciej Trela <maciej.trela@intel.com>
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

This driver is for Broadcom Netxtreme II 57712 chip. The following
patch contains the driver sources for bnx2fc driver.  libfc/libfcoe
changes to enable bnx2fc have already gone through the fcoe
tree. bnx2fc is a SCSI low level driver that interfaces with SCSI
midlayer, libfc, libfcoe, cnic modules.  bnx2fc driver uses services
of libfc for slow path operations such as FIP and fabric
discovery. The fast path IO perations are performed after offloading
the session information to the underlying FCoE firmware.
Signed-off-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

The patch below updates broken web addresses in the kernel
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Acked-by: NBen Pfaff <blp@cs.stanford.edu>
Acked-by: NHans J. Koch <hjk@linutronix.de>
Reviewed-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Fix kconfig dependency warnings in scsi/Kconfig:

warning: (SCSI_SAS_LIBSAS && SCSI || SCSI_MPT2SAS && SCSI_LOWLEVEL && PCI && SCSI || FUSION_SAS && FUSION && PCI && SCSI) selects SCSI_SAS_ATTRS which has unmet direct dependencies (SCSI && BLK_DEV_BSG)
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Signed-off-by: NKaren Xie <kxie@chelsio.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Added cxgb4i iSCSI driver.

This patch implements the cxgb4i iscsi connection acceleration for the
open-iscsi initiator.

The cxgb4i driver offers the iscsi PDU based offload:
- digest insertion and verification
- payload direct-placement into host memory buffer.
Signed-off-by: NKaren Xie <kxie@chelsio.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

pmcraid should depend on NET since it uses netlink interfaces.
This fixes multiple build errors when CONFIG_NET is not enabled:

ERROR: "genl_register_family" [drivers/scsi/pmcraid.ko] undefined!
ERROR: "genl_unregister_family" [drivers/scsi/pmcraid.ko] undefined!
ERROR: "nla_put" [drivers/scsi/pmcraid.ko] undefined!
ERROR: "init_net" [drivers/scsi/pmcraid.ko] undefined!
ERROR: "__alloc_skb" [drivers/scsi/pmcraid.ko] undefined!
ERROR: "netlink_broadcast" [drivers/scsi/pmcraid.ko] undefined!
ERROR: "kfree_skb" [drivers/scsi/pmcraid.ko] undefined!
ERROR: "skb_put" [drivers/scsi/pmcraid.ko] undefined!
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Anil Ravindranath <anil_ravindranath@pmc-sierra.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

iscsi_boot_sysfs does not depend on firmware. Any iscsi driver
can use it. This patch moves iscsi_boot_sysfs to the scsi
dir, so that it can be used on any arch with any driver.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Acked-by: NKonrad Rzeszutek Wilk <konrad@kernel.org>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Introduce support for DIF/DIX in zfcp: Report the capabilities for the
Scsi_host, map the protection data when issuing I/O requests and
handle the new error codes. Also add the fsf data_direction field to
the hba trace, it is useful information for debugging in that area.
This is an EXPERIMENTAL feature for now.
Signed-off-by: NFelix Beck <felix.beck@de.ibm.com>
Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

RAID attributes uses scsi_is_sdev_device() to gate some SCSI specific
checking code.  This causes two problems.  Firstly if SCSI == n just
defining scsi_is_sdev_device() to return false might not be enough to
prevent gcc from emitting the code (and thus referring to undefined
symbols), so this needs surrounding with an ifdef.  Secondly, using
scsi_is_sdev_device() when SCSI is either y or m gives a subtle
problem in the m case: raid_attrs must also be m to use the symbol.
Do the usual Kconfig jiggery-pokery to fix this.
Reported-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

This driver supports a subset of HP Smart Array Controllers.
It is a SCSI alternative to the cciss driver.

[akpm@linux-foundation.org: avoid helpful cleanup patches]
[achiang@hp.com: make device attrs static]
[akpm@linux-foundation.org: msleep() does set_current_state() itself]
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NMike Miller <mikem@beardog.cce.hp.com>
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Use libfcoe as a common FIP implementation with fcoe.
FIP or non-FIP mode is fully automatic if the firmware
supports and enables it.

Even if FIP is not supported, this uses libfcoe for the non-FIP
handling of FLOGI and its response.

Use the new lport_set_port_id() notification to capture
successful FLOGI responses and port_id resets.

While transitioning between Ethernet and FC mode, all rx and
tx FC frames are queued.  In Ethernet mode, all frames are
passed to the exchange manager to capture FLOGI responses.

Change to set data_src_addr to the ctl_src_addr whenever it
would have previously been zero because we're not logged in.
This seems safer so we'll never send a frame with a 0 source MAC.
This also eliminates a special case for sending FLOGI frames.
Signed-off-by: NJoe Eykholt <jeykholt@cisco.com>
Signed-off-by: NRobert Love <robert.w.love@intel.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

[jejb: fix up for new queue depth code]
Signed-off-by: NAdam Radford <aradford@gmail.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

This is a driver for VMware's paravirtualized SCSI device,
which should improve disk performance for guests running
under control of VMware hypervisors that support such devices.
Signed-off-by: NAlok N Kataria <akataria@vmware.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

This driver supports PMC-Sierra PCIe SAS/SATA 8x6G SPC 8001 chip based
host adapters.
Signed-off-by: NJack Wang <jack_wang@usish.com>
Signed-off-by: NLindar Liu <lindar_liu@usish.com>
Signed-off-by: NTom Peng <tom_peng@usish.com>
Signed-off-by: NKevin Ao <aoqingyun@usish.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

[v2: fixed up virt_to_bus() issue spotted by sfr]
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Add new driver for Brocade Hardware
Signed-off-by: NJing Huang <huangj@brocade.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Signed-off-by: NAnil Ravindranath <anil_ravindranath@pmc-sierra.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

People keep sending patches to expose CONFIG_SCSI_WAIT_SCAN as a tunable
item.  These patches aren't accepted upstream, so let's stop the ongoing
irritation of people due to the unconditionally installed module and its
Kconfig symbol.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

New iSCSI driver for Broadcom BNX2 devices.  The driver interfaces with
the CNIC driver to access the hardware.
Signed-off-by: NAnil Veerabhadrappa <anilgv@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

I had to set CONFIG_SCSI_MULTI_LUN to y in order to get my SE W595
working when plugging it as a mass storage. Looking at SCSI option to
get a phone behaving correctly was convoluted to say the least. There
are quite a few other reports about USB card readers needing this option
as well. This patch improves the help text to make the use of the option
more obvious.
Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Zero functional changes, just file movement.

This commit prepares for the upcoming integration of the
Marvell-provided driver update that splits the driver into support
for both 64xx and 94xx chip families.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

fnic is a driver for the Cisco PCI-Express FCoE HBA
Signed-off-by: NAbhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: NJoe Eykholt <jeykholt@cisco.com>
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Mention ATAPI. We could insert an essay about libata and ide-scsi etc but
the failure case is someone enables it which is just fine so keep it
simple.

(Revised text from suggestion by Matthew Wilcox)

Closes #7736
Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Just sets up build environment for libfcoe module towards a
libfcoe library for libfc LLDs using FCoE as libfc transport.

Common library code to libfcoe is added in next patch.

Also, updated MODULE_LICENSE from "GPL" string to "GPL v2" for
libfc, libfcoe and fcoe modules to accurately match the licenses.
Signed-off-by: NVasu Dev <vasu.dev@intel.com>
Signed-off-by: NRobert Love <robert.w.love@intel.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Signed-off-by: NMatt LaPlante <kernel1@cyberdogtech.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

* This is new scsi lld device driver from LSI supporting the SAS 2.0
  standard. I have split patchs by filename.

* Here is list of new 6gb host controllers:

  LSI SAS2004
  LSI SAS2008
  LSI SAS2108
  LSI SAS2116

* Here are the changes in the 4th posting of this patch set:

(1) fix compile errors when SCSI_MPT2SAS_LOGGING is not enabled
(2) add mpt2sas to the SCSI Mid Layer Makefile
(3) append mpt2sas_ to the naming of all non-static functions
(4) fix oops for SMP_PASSTHRU
(5) doorbell algorithm imported changes from windows driver

* Here are the changes in the 3rd posting of this patch set:

(1) add readl following writel from the function that disables interrupts
(2) replace 0xFFFFFFFFFFFFFFFFULL with ~0ULL
(3) when calling pci_enable_msix, only pass one msix entry (instead of 15).
(4) remove the "current HW implementation uses..... " comment in the sources
(5) merged bug fix for SIGIO/POLLIN notifcation; reported by the storlib team.

* Here are the changes in the 2nd posting of this patch set:

(1) use little endian types in the mpi headers
(2) merged in bug fix's from inhouse drivers.
Signed-off-by: NEric Moore <eric.moore@lsi.com>
Tested-by: Npeter Bogdanovic <pbog@us.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

OSD in kernel source code is assumed to be at:
drivers/scsi/osd/ with its own Makefile and Kconfig

Add includes to them from drivers/scsi Makefile and Kconfig
Add OSD to MAINTAINERS file
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Reviewed-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

The Kconfig entry for SCSI_LOGGING refers the reader to
drivers/scsi/scsi.c, but I didn't find any useful information
there. There is certainly logging code in that file, but the
logging types and logging levels are described in
drivers/scsi/scsi_logging.h.

Also, the procfs file referred to in the section is incorrect.
It should be /proc/sys/dev/scsi/logging_level and not
/proc/scsi/scsi.
Signed-off-by: NRobert Love <robert.w.love@intel.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

libfc uses crc32 functions, so cause it to be built
via select:

drivers/built-in.o: In function `fc_frame_crc_check':
(.text+0x75dae): undefined reference to `crc32_le'
drivers/built-in.o: In function `fc_fcp_recv':
fc_fcp.c:(.text+0x7b919): undefined reference to `crc32_le'
fc_fcp.c:(.text+0x7b9d5): undefined reference to `crc32_le'
fc_fcp.c:(.text+0x7ba54): undefined reference to `crc32_le'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NRobert Love <robert.w.love@intel.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Fix scsi_debug build error:

drivers/built-in.o: In function `resp_read':
scsi_debug.c:(.text+0x21379a): undefined reference to `crc_t10dif'
drivers/built-in.o: In function `resp_write':
scsi_debug.c:(.text+0x213fca): undefined reference to `crc_t10dif'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>