It is unnecessary, and in general impossible, to define the compat
ioctl numbers except when building the filesystem with CONFIG_COMPAT
defined.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Use DECLARE_EVENT_CLASS, and save ~2.7K:

   text    data     bss     dec     hex filename
 274441    7200     260  281901   44d2d fs/ext4/ext4.o.orig
 271881    7040     256  279177   44289 fs/ext4/ext4.o

4 events are converted:

  ext4__mb_new_pa: ext4_mb_new_inode_pa, ext4_mb_new_group_pa
  ext4__mballoc:   ext4_mballoc_discard, ext4_mballoc_free

No change in functionality.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Commit f8ec9d68 added a
trace event ext4_da_release_space, but didn't add some
corresponding trace hook.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

If i_data_sem was internally dropped due to transaction restart, it is
necessary to restart path look-up because extents tree was possibly
modified by ext4_get_block().

https://bugzilla.kernel.org/show_bug.cgi?id=15827Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Acked-by: NJan Kara <jack@suse.cz>

Dimitry Monakhov discovered an edge case where it was possible for the
EXT4_EOFBLOCKS_FL flag could get cleared unnecessarily.  This is true;
I have a test case that can be exercised via downloading and
decompressing the file:

wget ftp://ftp.kernel.org/pub/linux/kernel/people/tytso/ext4-testcases/eofblocks-fl-test-case.img.bz2
bunzip2 eofblocks-fl-test-case.img
dd if=/dev/zero of=eofblocks-fl-test-case.img bs=1k seek=17925 bs=1k count=1 conv=notrunc

However, triggering it in real life is highly unlikely since it
requires an extremely fragmented sparse file with a hole in exactly
the right place in the extent tree.  (It actually took quite a bit of
work to generate this test case.)  Still, it's nice to get even
extreme corner cases to be correct, so this patch makes sure that we
don't clear the EXT4_EOFBLOCKS_FL incorrectly even in this corner
case.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

If the EOFBLOCK_FL flag is set when it should not be and the inode is
zero length, then eh_entries is zero, and ex is NULL, so dereferencing
ex to print ex->ee_block causes a kernel OOPS in
ext4_ext_map_blocks().

On top of that, the error message which is printed isn't very helpful.
So we fix this by printing something more explanatory which doesn't
involve trying to print ex->ee_block.

Addresses-Google-Bug: #2655740
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

At several places we modify EXT4_I(inode)->i_flags without holding
i_mutex (ext4_do_update_inode, ...). These modifications are racy and
we can lose updates to i_flags. So convert handling of i_flags to use
bitops which are atomic.

https://bugzilla.kernel.org/show_bug.cgi?id=15792Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

EXT4_ERROR_INODE() tends to provide better error information and in a
more consistent format.  Some errors were not even identifying the inode
or directory which was corrupted, which made them not very useful.

Addresses-Google-Bug: #2507977
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This saves a huge amount of stack space by avoiding unnecesary struct
buffer_head's from being allocated on the stack.

In addition, to make the code easier to understand, collapse and
refactor ext4_get_block(), ext4_get_block_write(),
noalloc_get_block_write(), into a single function.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Jack up ext4_get_blocks() and add a new function, ext4_map_blocks()
which uses a much smaller structure, struct ext4_map_blocks which is
20 bytes, as opposed to a struct buffer_head, which nearly 5 times
bigger on an x86_64 machine.  By switching things to use
ext4_map_blocks(), we can save stack space by using ext4_map_blocks()
since we can avoid allocating a struct buffer_head on the stack.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Make a copy of write_cache_pages() for the benefit of
ext4_da_writepages().  This allows us to simplify the code some, and
will allow us to further customize the code in future patches.

There are some nasty hacks in write_cache_pages(), which Linus has
(correctly) characterized as vile.  I've just copied it into
write_cache_pages_da(), without trying to clean those bits up lest I
break something in the ext4's delalloc implementation, which is a bit
fragile right now.  This will allow Dave Chinner to clean up
write_cache_pages() in mm/page-writeback.c, without worrying about
breaking ext4.  Eventually write_cache_pages_da() will go away when I
rewrite ext4's delayed allocation and create a general
ext4_writepages() which is used for all of ext4's writeback.  Until
now this is the lowest risk way to clean up the core
write_cache_pages() function.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Dave Chinner <david@fromorbit.com>

We failed to show journal_checksum option in /proc/mounts. Fix it.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Fix ext4_mb_collect_stats() to use the correct test for s_bal_success; it
should be testing "best-extent.fe_len >= orig-extent.fe_len" , not
"orig-extent.fe_len >= goal-extent.fe_len" .
Signed-off-by: NCurt Wohlgemuth <curtw@google.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This adds a new field in ext4_group_info to cache the largest available
block range in a block group; and don't load the buddy pages until *after*
we've done a sanity check on the block group.

With large allocation requests (e.g., fallocate(), 8MiB) and relatively full
partitions, it's easy to have no block groups with a block extent large
enough to satisfy the input request length.  This currently causes the loop
during cr == 0 in ext4_mb_regular_allocator() to load the buddy bitmap pages
for EVERY block group.  That can be a lot of pages.  The patch below allows
us to call ext4_mb_good_group() BEFORE we load the buddy pages (although we
have check again after we lock the block group).

Addresses-Google-Bug: #2578108
Addresses-Google-Bug: #2704453
Signed-off-by: NCurt Wohlgemuth <curtw@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Currently using posix_fallocate one can bypass an RLIMIT_FSIZE limit
and create a file larger than the limit. Add a check for that.
Signed-off-by: NNikanth Karthikesan <knikanth@suse.de>
Signed-off-by: NAmit Arora <aarora@in.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Addresses-Google-Bug: #2562325
Signed-off-by: NCurt Wohlgemuth <curtw@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This adds a "re-mounted" message to ext4_remount(), and both it and
the mount message in ext4_fill_super() now have the original mount
options data string.
Signed-off-by: NCurt Wohlgemuth <curtw@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Because we can badly over-reserve metadata when we
calculate worst-case, it complicates things for quota, since
we must reserve and then claim later, retry on EDQUOT, etc.
Quota is also a generally smaller pool than fs free blocks,
so this over-reservation hurts more, and more often.

I'm of the opinion that it's not the worst thing to allow
metadata to push a user slightly over quota.  This simplifies
the code and avoids the false quota rejections that result
from worst-case speculation.

This patch stops the speculative quota-charging for
worst-case metadata requirements, and just charges quota
when the blocks are allocated at writeout.  It also is
able to remove the try-again loop on EDQUOT.

This patch has been tested indirectly by running the xfstests
suite with a hack to mount & enable quota prior to the test.

I also did a more specific test of fragmenting freespace
and then doing a large delalloc write under quota; quota
stopped me at the right amount of file IO, and then the
writeout generated enough metadata (due to the fragmentation)
that it put me slightly over quota, as expected.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

To simplify metadata tracking for delalloc writes, ext4
will simply claim metadata blocks at allocation time, without
first speculatively reserving the worst case and then freeing
what was not used.

To do this, we need a mechanism to track allocations in
the quota subsystem, but potentially allow that allocation
to actually go over quota.

This patch adds a DQUOT_SPACE_NOFAIL flag and function
variants for this purpose.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Switch __dquot_alloc_space and __dquot_free_space to take flags
to indicate whether to warn and/or to reserve (or free reserve).

This is slightly more readable at the callpoints, and makes it
cleaner to add a "nofail" option in the next patch.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Currently block/inode/dir counters initialized before journal was
recovered. In fact after journal recovery this info will probably
change. And freeblocks it critical for correct delalloc mode
accounting.

https://bugzilla.kernel.org/show_bug.cgi?id=15768Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

- Reorganize locking scheme to batch two atomic operation in to one.
  This also allow us to state what healthy group must obey following rule
  ext4_free_inodes_count(sb, gdp) == ext4_count_free(inode_bitmap, NUM);
- Fix possible undefined pointer dereference.
- Even if group descriptor stats aren't accessible we have to update
  inode bitmaps.
- Move non-group members update out of group_lock.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The extents code will sometimes zero out blocks and mark them as
initialized instead of splitting an extent into several smaller ones.
This optimization however, causes problems if the extent is beyond
i_size because fsck will complain if there are uninitialized blocks
after i_size as this can not be distinguished from an inode that has
an incorrect i_size field.

https://bugzilla.kernel.org/show_bug.cgi?id=15742Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

One of the most contended locks in the jbd2 layer is j_state_lock when
running dbench.  This is especially true if using the real-time kernel
with its "sleeping spinlocks" patch that replaces spinlocks with
priority inheriting mutexes --- but it also shows up on large SMP
benchmarks.

Thanks to John Stultz for pointing this out.

Reviewed by Mingming Cao and Jan Kara.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

There was a bug reported on RHEL5 that a 10G dd on a 12G box
had a very, very slow sync after that.

At issue was the loop in write_cache_pages scanning all the way
to the end of the 10G file, even though the subsequent call
to mpage_da_submit_io would only actually write a smallish amt; then
we went back to the write_cache_pages loop ... wasting tons of time
in calling __mpage_da_writepage for thousands of pages we would
just revisit (many times) later.

Upstream it's not such a big issue for sys_sync because we get
to the loop with a much smaller nr_to_write, which limits the loop.

However, talking with Aneesh he realized that fsync upstream still
gets here with a very large nr_to_write and we face the same problem.

This patch makes mpage_add_bh_to_extent stop the loop after we've
accumulated 2048 pages, by setting mpd->io_done = 1; which ultimately
causes the write_cache_pages loop to break.

Repeating the test with a dirty_ratio of 80 (to leave something for
fsync to do), I don't see huge IO performance gains, but the reduction
in cpu usage is striking: 80% usage with stock, and 2% with the
below patch.  Instrumenting the loop in write_cache_pages clearly
shows that we are wasting time here.

Eventually we need to change mpage_da_map_pages() also submit its I/O
to the block layer, subsuming mpage_da_submit_io(), and then change it
call ext4_get_blocks() multiple times.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Turn off issuance of discard requests if the device does
not support it - similar to the action we take for barriers.
This will save a little computation time if a non-discardable
device is mounted with -o discard, and also makes it obvious
that it's not doing what was asked at mount time ...
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

ext4_freeze() used jbd2_journal_lock_updates() which takes
the j_barrier mutex, and then returns to userspace.  The
kernel does not like this:

================================================
[ BUG: lock held when returning to user space! ]
------------------------------------------------
lvcreate/1075 is leaving the kernel with locks still held!
1 lock held by lvcreate/1075:
 #0:  (&journal->j_barrier){+.+...}, at: [<ffffffff811c6214>]
jbd2_journal_lock_updates+0xe1/0xf0

Use vfs_check_frozen() added to ext4_journal_start_sb() and
ext4_force_commit() instead.

Addresses-Red-Hat-Bugzilla: #568503
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

generic setattr implementation is no longer responsible for
quota transfer so synlinks must be handled via ext4_setattr.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

If groups_per_flex < 2, sbi->s_flex_groups[] doesn't get filled out,
and every other access to this first tests s_log_groups_per_flex;
same thing needs to happen in resize or we'll wander off into
a null pointer when doing an online resize of the file system.

Thanks to Christoph Biedl, who came up with the trivial testcase:

# truncate --size 128M fsfile
# mkfs.ext3 -F fsfile
# tune2fs -O extents,uninit_bg,dir_index,flex_bg,huge_file,dir_nlink,extra_isize fsfile
# e2fsck -yDf -C0 fsfile
# truncate --size 132M fsfile
# losetup /dev/loop0 fsfile
# mount /dev/loop0 mnt
# resize2fs -p /dev/loop0

	https://bugzilla.kernel.org/show_bug.cgi?id=13549Reported-by: NAlessandro Polverini <alex@nibbles.it>
Test-case-by: NChristoph Biedl  <bugzilla.kernel.bpeb@manchmal.in-ulm.de>
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

allocated_meta_data is already included in 'used' variable.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

I have an x86_64 kernel with i386 userspace. e4defrag fails on the
EXT4_IOC_MOVE_EXT ioctl because it is not wired up for the compat
case. It seems that struct move_extent is compat save, only types
with fixed widths are used:
{
        __u32 reserved;         /* should be zero */
        __u32 donor_fd;         /* donor file descriptor */
        __u64 orig_start;       /* logical start offset in block for orig */
        __u64 donor_start;      /* logical start offset in block for donor */
        __u64 len;              /* block length to be moved */
        __u64 moved_len;        /* moved block length */
};

Lets just wire up EXT4_IOC_MOVE_EXT for the compat case.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: NEric Sandeen <sandeen@redhat.com>
CC: Akira Fujita <a-fujita@rs.jp.nec.com> 

This function cleans up after ext4_mb_load_buddy(), so the renaming
makes the code clearer.
Signed-off-by: NJing Zhang <zj.barak@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: NJing Zhang <zj.barak@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

When EIO occurs after bio is submitted, there is no memory free
operation for bio, which results in memory leakage. And there is also
no check against bio_alloc() for bio.
Acked-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: NJing Zhang <zj.barak@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Making sure ee_block is initialized to zero to prevent gcc from
kvetching.  It's harmless (although it's not obvious that it's
harmless) from code inspection:

fs/ext4/move_extent.c:478: warning: 'start_ext.ee_block' may be used
uninitialized in this function

Thanks to Stefan Richter for first bringing this to the attention of
linux-ext4@vger.kernel.org.
Signed-off-by: LiuQi <lingjiujianke@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>

Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] Retry commands with UNIT_ATTENTION sense codes to fix ext3/ext4 I/O error
  [SCSI] Enable retries for SYNCRONIZE_CACHE commands to fix I/O error
  [SCSI] scsi_debug: virtual_gb ignores sector_size
  [SCSI] libiscsi: regression: fix header digest errors
  [SCSI] fix locking around blk_abort_request()
  [SCSI] advansys: fix narrow board error path

commit 672917dc ("cpuidle: menu governor: reduce latency on exit")
added an optimization, where the analysis on the past idle period moved
from the end of idle, to the beginning of the new idle.

Unfortunately, this optimization had a bug where it zeroed one key
variable for new use, that is needed for the analysis.  The fix is
simple, zero the variable after doing the work from the previous idle.

During the audit of the code that found this issue, another issue was
also found; the ->measured_us data structure member is never set, a
local variable is always used instead.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Corrado Zoccolo <czoccolo@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>