- 17 11月, 2016 28 次提交
-
-
由 Hans Verkuil 提交于
Make sure the TX counters are zeroed in the cec_msg struct. Non-zero TX counters make no sense when a message is received, and applications should not see non-zero values here. Signed-off-by: NHans Verkuil <hansverk@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
The cec framework and the pulse8-cec driver have been moved out of staging, so update the MAINTAINERS paths. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
Update the TODOs explaining why these two drivers remain in staging. The reason is that these drivers rely on userspace to set the physical address, but that should come from the HDMI output driver. This in turn needs the upcoming HDMI notifier framework. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
Now that the CEC framework has been moved out of staging and into the mainline kernel we can do the same for the pulse8-cec driver. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
An inner for-loop reused the outer loop variable. This was only noticeable with CEC adapters supporting more than one logical address. Signed-off-by: NHans Verkuil <hansverk@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
Replace bool by int or __u8 (when used in a struct). Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
The CEC_MSG_FL_REPLY_TO_FOLLOWERS message flag only makes sense for transmitted messages where you want to wait for the reply. Clear the flag in all other cases. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
The last open issues have been addressed, so it is time to move this out of staging and into the mainline and to move the public cec headers to include/uapi/linux. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
CDC-Only CEC devices are CEC devices that can only handle CDC messages, all other messages are ignored. Add a flag to signal that this is a CDC-Only device and act accordingly. Also add helper functions to identify if a CEC device is configured as a CDC-Only device, a second TV, a switch or a processor, since these variations cannot be determined by the logical address alone. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
The CEC_MSG_INITIATE_ARC message is special since it is the ONLY CEC message that accepts two possible valid replies: CEC_MSG_REPORT_ARC_INITIATED and CEC_MSG_REPORT_ARC_TERMINATED. So if the transmitted message is CEC_MSG_INITIATE_ARC and the remote side replied with CEC_MSG_REPORT_ARC_INITIATED or CEC_MSG_REPORT_ARC_TERMINATED, then a msg->reply value of CEC_MSG_REPORT_ARC_INITIATED or CEC_MSG_REPORT_ARC_TERMINATED will match either reply. I thought about either adding a second reply2 field, but that's ugly for all other messages that have only one reply, and what if in the future a new message is added that can have three replies? Another option would be to add a cec_msg flag, but really, the combination of CEC_MSG_REPORT_ARC_INITIATED and a reply value of one of the two possible replies already functions as a flag. Another advantage of this approach is that it is safe to re-use a cec_msg struct. No need to zero a flags field or a reply2 field. So since this really is an exception in the CEC specification, I decided to implement it as an exception as well. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
As per the CEC specification: - CEC messages with a too-small payload should be ignored. - Broadcast messages that are only allowed as directed messages should be ignored. - Directed messages that are only allowed as broadcast messages should be ignored. Implement this in the core CEC framework. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
Give the caller more control over how replies to a transmit are handled. By default the reply will only go to the filehandle that called CEC_TRANSMIT. If this new flag is set, then the reply will also go to all followers. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
By default the CEC_MSG_USER_CONTROL_PRESSED/RELEASED messages are passed on to the follower(s) only. If the new CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU flag is set in the flags field of struct cec_log_addrs then these messages are also passed on to the remote control input subsystem and they will appear as keystrokes. This used to be the default behavior, but now you have to explicitly enable it. This is done to force the caller to think about possible security issues (e.g. if these messages are used to enter passwords). Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
This uses Laurent's python script to convert all tables, dropping the useless 'row' comments. See commit c2b66caf ("[media] v4l: doc: Remove row numbers from tables") for the script that was used. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
When the persistent state is restored, the all_device_types field was never filled in. Fix this. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
The vmr_stat variable was filled with the contents of the control register, not the status register. Classic copy-and-paste error. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Wu-Cheng Li 提交于
vb2_qbuf will check the buffer index. If a driver overrides vidioc_qbuf and use the buffer index, the driver needs to check the index. Signed-off-by: NWu-Cheng Li <wuchengli@chromium.org> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
The code examples on how to enumerate controls were really long in the tooth. Update them. Using FLAG_NEXT_CTRL is preferred these days, so give that example first. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
Improve the internal CEC documentation. In particular add a section that specifies that transmit-related interrupts should be processed before receive interrupts. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Markus Elfring 提交于
Use a direct assignment for an array element which can be set over the pointer variable "inp" instead of calling the function "memcpy" here. Suggested-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Markus Elfring 提交于
* A function was called over the pointer "setup_if_config" in the data structure "venc_platform_data". But the return value was not used so far. Thus assign it to the local variable "ret" which will be checked with the next statement. Fixes: 9a7f95ad ("[media] davinci vpbe: add dm365 VPBE display driver changes") * Pass a value to this function call without storing it in an intermediate variable before. * Delete the local variable "if_params" which became unnecessary with this refactoring. Acked-by: NLad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Maninder Singh 提交于
This patch fixes the following checkpatch.pl error: ERROR: Macros with complex values should be enclosed in parentheses Signed-off-by: NManinder Singh <maninder.s2@samsung.com> Acked-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
Obtain the correct timings based on the VIC code from the AVI InfoFrame. It does a sanity check to see if at least the measured width and height are in line with what the VIC code reports. If not, then use the timings instead of the VIC code (as per the CEA-861 spec). Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
Now that the timings contain picture aspect ratio information, we can support cropcap to return the pixel aspect ratio. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
Add a helper to find timings based on the CEA-861 VIC code. Also, add a helper that returns the pixel aspect ratio based on the v4l2_dv_timings struct. [mchehab@s-opensource.com: fix coding style] Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
Add the CEA-861 VIC, the HDMI VIC and the picture aspect ratio information where applicable. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
Document the new flags. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
Add picture aspect ratio information, the CEA-861 VIC (Video Identification Code) and the HDMI VIC to struct v4l2_bt_timings. The picture aspect was chosen rather than the pixel aspect since 1) the CEA-861 standard uses picture aspect, and 2) pixel aspect ratio can become tricky when dealing with pixel repeat timings. While we don't support those yet at the moment, this might become necessary. And in that case using picture aspect ratio makes more sense. And converting picture aspect ratio to pixel aspect ratio is easy enough. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 16 11月, 2016 12 次提交
-
-
由 Hans Verkuil 提交于
Format comments according to what checkpatch wants. No other changes. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Jonathan Sims 提交于
This is a reworking of a patch originally submitted by Ryley Angus, modified by Hans Verkuil and then seemingly forgotten before changes suggested by Keith Pyle here: http://www.mail-archive.com/linux-media@vger.kernel.org/msg75163.html were made and tested. I have implemented the suggested changes and have been testing for the last 2 months. I am no longer experiencing lockups while recording (with blue light on, requiring power cycling) which had been a long standing problem with the HD-PVR. I have not noticed any other problems since applying the patch. Signed-off-by: NJonathan Sims <jonathan.625266@earthlink.net> Reported-by: NRyley Angus <ryleyjangus@gmail.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Sakari Ailus 提交于
Memory-to-memory V4L2 devices all have file handle specific context. Say this in the API documentation so that the user space may rely on it being the case. Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Colin Ian King 提交于
The second check for an error on hva->lmi_err_reg appears to be a copy-and-paste error, it should be hva->emi_err_reg instead. Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NJean-Christophe Trotin <jean-christophe.trotin@st.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Masahiro Yamada 提交于
Remove unneeded variables and assignments. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Wei Yongjun 提交于
Remove including <linux/version.h> that don't need it. Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Fengguang Wu 提交于
drivers/media/platform/mtk-mdp/mtk_mdp_core.c:284:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci CC: Minghsiu Tsai <minghsiu.tsai@mediatek.com> Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Vincent Stehlé 提交于
The mtk_mdp_comp_dt_ids[] array should be NULL-terminated; add therefore an empty entry in the end. Fixes: c8eb2d7e ("[media] media: Add Mediatek MDP Driver") Signed-off-by: NVincent Stehlé <vincent.stehle@laposte.net> Cc: Minghsiu Tsai <minghsiu.tsai@mediatek.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Andrey Utkin 提交于
This fixes a lockup at device probing which happens on some solo6010 hardware samples. This is a regression introduced by commit e1ceb25a ("[media] SOLO6x10: remove unneeded register locking and barriers") The observed lockup happens in solo_set_motion_threshold() called from solo_motion_config(). This extra "flushing" is not fundamentally needed for every write, but apparently the code in driver assumes such behaviour at last in some places. Actual fix was proposed by Hans Verkuil. Fixes: e1ceb25a ("[media] SOLO6x10: remove unneeded register locking and barriers") Cc: stable@vger.kernel.org # 4.3 and up Signed-off-by: NAndrey Utkin <andrey.utkin@corp.bluecherry.net> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Masanari Iida 提交于
This patch fix spelling typos found in vidioc-g-tuner.rst Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Javier Martinez Canillas 提交于
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/staging/media//st-cec/stih-cec.ko | grep alias $ After this patch: $ modinfo drivers/staging/media//st-cec/stih-cec.ko | grep alias alias: of:N*T*Cst,stih-cecC* alias: of:N*T*Cst,stih-cec Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Acked-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Javier Martinez Canillas 提交于
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/staging/media/s5p-cec/s5p-cec.ko | grep alias $ After this patch: $ modinfo drivers/staging/media/s5p-cec/s5p-cec.ko | grep alias alias: of:N*T*Csamsung,s5p-cecC* alias: of:N*T*Csamsung,s5p-cec Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-