Moorestown has PMIC chip which contains GPIO blocks. The PMIC chip is
connected to Langwell by SPI interface. So this GPIO driver will be regarded
as SPI GPIO expander though the actual GPIO access is through IPC and SRAM.
The SPI master contoller will probe this device driver by parsing SPIB table.

Cleaned up for new IPC, GPE removed and some printk and other tidying by
Alan Cox. Fixes for points noted by Matthew Garrett
Signed-off-by: NAlek Du <alek.du@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Formerly these have been exposed through /proc/..
Better register them where all IO ports should get registered
and scream loud if someone else claims to use them.

EC data and command port typically should show up like this
then:
...
  0060-0060 : keyboard
  0062-0062 : EC data
  0064-0064 : keyboard
  0066-0066 : EC command
  0070-0071 : rtc0
...
Signed-off-by: NThomas Renninger <trenn@suse.de>

CC: Alexey Starikovskiy <astarikovskiy@suse.de>
CC: Len Brown <lenb@kernel.org>
CC: linux-kernel@vger.kernel.org
CC: linux-acpi@vger.kernel.org
CC: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: platform-driver-x86@vger.kernel.org
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

A userspace app to easily read/write the EC can be found here:
ftp://ftp.suse.com/pub/people/trenn/sources/ec/ec_access.c

Multiple ECs are not supported, but shouldn't be hard to add as soon
as the ec driver itself will support them.
Signed-off-by: NThomas Renninger <trenn@suse.de>
CC: Alexey Starikovskiy <astarikovskiy@suse.de>
CC: Len Brown <lenb@kernel.org>
CC: linux-kernel@vger.kernel.org
CC: linux-acpi@vger.kernel.org
CC: platform-driver-x86@vger.kernel.org
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

This patch provides the same information through debugfs, which previously was
provided through /proc/acpi/embedded_controller/*/info

This is the gpe the EC is connected to and whether the global lock
gets used.
The io ports used are added to /proc/ioports in another patch.
Beside the fact that /proc/acpi is deprecated for quite some time,
this info is not needed for applications and thus can be moved
to debugfs instead of a public interface like /sys.
Signed-off-by: NThomas Renninger <trenn@suse.de>

CC: Alexey Starikovskiy <astarikovskiy@suse.de>
CC: Len Brown <lenb@kernel.org>
CC: linux-kernel@vger.kernel.org
CC: linux-acpi@vger.kernel.org
CC: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: platform-driver-x86@vger.kernel.org
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NThomas Renninger <trenn@suse.de>

CC: Alexey Starikovskiy <astarikovskiy@suse.de>
CC: Len Brown <lenb@kernel.org>
CC: linux-kernel@vger.kernel.org
CC: linux-acpi@vger.kernel.org
CC: platform-driver-x86@vger.kernel.org
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The .add function must not be declared __init.
Signed-off-by: NThomas Renninger <trenn@suse.de>

CC: Alexey Starikovskiy <astarikovskiy@suse.de>
CC: Len Brown <lenb@kernel.org>
CC: linux-kernel@vger.kernel.org
CC: linux-acpi@vger.kernel.org
CC: platform-driver-x86@vger.kernel.org
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

There is a general interface for that now (provided by
other patches in this patch series):
/sys/kernel/debug/ec/*/io
Signed-off-by: NThomas Renninger <trenn@suse.de>

CC: Alexey Starikovskiy <astarikovskiy@suse.de>
CC: Len Brown <lenb@kernel.org>
CC: linux-kernel@vger.kernel.org
CC: linux-acpi@vger.kernel.org
CC: platform-driver-x86@vger.kernel.org
CC: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
CC: ibm-acpi-devel@lists.sourceforge.net
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Other patches in this series add the same info to /sys/... and
/proc/ioports.

The info removed should never have been used in an application,
eventually someone read it manually.
/proc/acpi is deprecated for more than a year anyway...
Signed-off-by: NThomas Renninger <trenn@suse.de>

CC: Alexey Starikovskiy <astarikovskiy@suse.de>
CC: Len Brown <lenb@kernel.org>
CC: linux-kernel@vger.kernel.org
CC: linux-acpi@vger.kernel.org
CC: platform-driver-x86@vger.kernel.org
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

In current implementation, acpi_pcc_write_sset return 1
if write is successful, 0 if write is failed.
But all the callers consider acpi_pcc_write_sset return 0
if write is successful and return negtive if write is failed.

This patch changes the implementation of acpi_pcc_write_sset to
return 0 if write is successful, -EIO if write is failed.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The hotplug_disabled module parameter is determinated at the module load
time.  Change the value after the module is loaded does not make sense and
has no effect at all, thus set the permissions to 0444 instead of 0644.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The wapf module parameters defines the behavior of the Fn+Fx wlan key.
The wlan_status and bluetooth_status module parameters are for setting the
wlan/bluetooth status on boot.

All above module parameters are determinated only at the module load time.
 Change the value after the module is loaded does not make sense and has
no effect at all, thus set the permissions to 0444 instead of 0644.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Remove non-used acer_quirks struct definition.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

When acpi_evaluate_object() is passed ACPI_ALLOCATE_BUFFER, the caller
must kfree the returned buffer if AE_OK is returned.

Call Trace:
wmab_execute
  -> wmi_evaluate_method
    -> acpi_evaluate_object

Thus if callers of wmab_execute() pass ACPI_ALLOCATE_BUFFER, the return
buffer must be kfreed if wmab_execute return AE_OK.

[akpm@linux-foundation.org: avoid multiple return points, remove unneeded cast, remove unneeded initialisation of `status']
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

When acpi_evaluate_object() is passed ACPI_ALLOCATE_BUFFER, the caller
must kfree the returned buffer if AE_OK is returned.

The callers of wmi_query_block() pass ACPI_ALLOCATE_BUFFER, and thus must
check its return value before accessing or kfree() on the buffer.

This patch adds a missing kfree(out.pointer) before exit
WMID_set_capabilities() and get_wmid_devices().
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

toshiba_acpi: rename add_device() and remove_device() to create_toshiba_proc_entries() and remove_toshiba_proc_entries()

To improve readability rename add_device() to
create_toshiba_proc_entries() and rename remove_device() to
remove_toshiba_proc_entries().
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Márton Németh <nm127@freemail.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Add error checking and return -ENOMEM if input_allocate_device() fail.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NThomas Renninger <trenn@suse.de>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

remove_device() and add_device() are not related to ACPI APIs, it does not
make sense to return acpi_status for both functions.

Current implementation of add_device() always AE_OK, thus the return value
checking for add_device() always return false for ACPI_FAILURE(status).
This patch makes add_device() to be void and remove the unnecessary return
value checking.

remove_proc_entry() won't fail, thus change remove_device() to be void.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Márton Németh <nm127@freemail.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Fix resource reclaim in below cases:

1. acerhdf_register_platform() does not properly handle
   platform_device_alloc() failure and platform_device_add() failure This
   patch adds error handing for acerhdf_register_platform().

2. acerhdf_register_platform() return err with acerhdf_dev == NULL.
   as a result, acerhdf_unregister_platform() does not do resource reclaim
   in acerhdf_init() error path.  This patch adds error handing for
   acerhdf_register_platform(), thus correct the error handing path in
   acerhdf_init().  goto out_err instead of err_unreg if
   acerhdf_register_platform() fail.

3. platform_device_del() should only used in error handling.  Current
   implementation missed a platform_device_put() in acerhdf_exit.  This
   patch fixes it by using platform_device_unregister() instead of
   platform_device_del() in acerhdf_unregister_platform.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NPeter Feuerer <peter@piie.net>
Cc: Matthew Garrett <mjg@redhat.com>
Acked-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

In current implementation, store_ledd() does not return error if
write_acpi_int fail.  This patch fixes it by return -ENODEV if
write_acpi_int fail.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

According to the comments of write_acpi_int_ret(), write_acpi_int_ret()
should return 0 if write is successful, -1 else.  Thus if handle is NULL,
the write does not happen, it should return -1.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

rfkill uses a const struct rfkill_ops pointer.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The following symbols are needlessly defined global:

logolamp_led
kblamps_led

This patch makes the symbols static.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Acked-by: NJonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

cmpc_accel_sensitivity_attr is needlessly defined global.
This patch makes the symbol static.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Cc: Daniel Oliveira Nascimento <don@syst.com.br>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The following symbols are needlessly defined global:

thz_dev
cl_dev
acerhdf_dev
acerhdf_dev_ops
acerhdf_cooling_ops

This patch makes the symbols static.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NBorislav Petkov <bp@alien8.de>
Acked-by: NPeter Feuerer <peter@piie.net>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

In the case of no match ( hotk->model == END_MODEL ), the only posible
case to return 0 is to have a Samsung P30 detected.  This patch improves
readability by moving related code after if/else clause to be inside if
clause.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Karol Kozimor <sziwan@users.sourceforge.net>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

In the case of no match ( hotk->model == END_MODEL ), model sholud be
kfreed before return AE_OK.

This patch includes below fixes:

1. adds a missing kfree(model) before return AE_OK.

2. asus_hotk_get_info should return int, thus return 0 instead of AE_OK.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Karol Kozimor <sziwan@users.sourceforge.net>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

dmi_check_system() walks the table running matching functions until
someone returns non zero or we hit the end.

This patch makes dmi_check_cb to return 1 so dmi_check_system() return
immediately when a match is found.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NJonathan Woithe <jwoithe@physics.adelaide.edu.au>
Cc: Matthew Garrett <mjg@redhat.com>a
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The driver now supports the Compal JHL90 (which I use) and it has some
added features.  The biggest novelties are a battery interface
(power_supply) and a temperature and fan control interface (hmwon).  It
also adds a power-off feature to the backlight subsystem and it exports a
few files that can enable/disable wake_on_XXX events.

Much of the original code of the old features is still there, but I've
changed some names to keep the naming more coherent with the added
functionalities.  (Sorry for the huge patch)

Some technical stuff about the new driver:

First of all, I'm not sure if the extra features also work on the other
Compal boards.  Currently they only get enabled if the DMI data indicates
you are on a JHL90 board.

Secondly, I've noticed a quirk in my fan controller.  I have to re-send
the wanted pwm-level to the controller every so often.  If I don't do
this, the fanspeed will slowly rise until after a couple of minutes it's
at full speed.  (Note that every normal userland application will probably
update the pwm-level every so often anyway, based on temperature readings,
so this might not be an issue in practice) If this turns out to be a
problem with all the controllers, maybe we should implement a kernel timer
and have the driver re-send the pwm level every XX seconds to make this
transparent to userspace?  (However, I couldn't immediately find a way to
do this cleanly.)

Additional information can be found in the source comments.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: add missing semicolon]
Signed-off-by: NRoald Frederickx <roald.frederickx@gmail.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

compal-laptop uses hwmon interfaces, so it should depend on HWMON.

compal-laptop.c:(.devinit.text+0x4071f): undefined reference to `hwmon_device_register'
compal-laptop.c:(.devexit.text+0x6ec0): undefined reference to `hwmon_device_unregister'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Roald Frederickx <roald.frederickx@gmail.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

input_free_device() should only be used if input_register_device() was not
called yet or if it failed.  This patch removes unnecessary
input_free_device calls.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NJonathan Woithe <jwoithe@physics.adelaide.edu.au>
Acked-by: NDmitry Torokhov <dtor@mail.ru>
Cc: Matthew Garrett <mjg@redhat.com>a
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NPeter Feuerer <peter@piie.net>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Cc: Len Brown <lenb@kernel.org>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Driver didn't verify the pointers in which it got product information back
from DMI; on QEMU one of the pointers came back null, which made the
driver crash and subsequently caused a kernel panic.
Signed-off-by: NRahul Chaturvedi <rkc@chromium.org>
Signed-off-by: NPeter Feuerer <peter@piie.net>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Cc: Len Brown <lenb@kernel.org>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Remove "chk_off" as it was only needed for T31 netbooks.  But those
netbooks can also be handled just with "cmd_off" register (0x9e) for
reading the state back.
Signed-off-by: NPeter Feuerer <peter@piie.net>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Cc: Len Brown <lenb@kernel.org>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Add new BIOS versions for Acer 1410 and 1810xx and Packard Bell netbooks.

Fixed registers of Acer AOA150 BIOS version v0.3114: Old registers caused
Fan to spin up at every temperature check.
Signed-off-by: NPeter Feuerer <peter@piie.net>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NThomas Renninger <trenn@suse.de>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Axel Lin <axel.lin@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Thomas Bächler reports that his machine generates two keycodes for zooming
in and out. Add these to the default keymap.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Cc: Thomas Bächler <thomas@archlinux.org>

platform_device_unregister calls platform_device_del and platform_device_put,
thus this change is logically equivalent to original code.

I made this change because the documents in platform.c shows that:
platform_device_del and platform_device_put must _only_ be externally called
in error cases.  All other usage is a bug.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

If dell_new_hk_type is true, dell_legacy_wmi_keymap will point to a memory
allocated in setup_new_hk_map().
In this case, the memory is not freed in current implementation.
This patch fixes the leak by kfree(dell_wmi_keymap) if dell_new_hk_type is true.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

dmi_check_system() walks the table running matching functions until someone
returns non zero or we hit the end.

This patch makes dmi_matched to return 1 so dmi_check_system() return
immediately when a match is found.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The interface file is not writable, thus set permissions to S_IRUGO.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>