Get rid of some obnoxious and inappropriate messaging, mostly on
DaVinci, when usbcore tries to autosuspend a root hub if just a
mini/micro-A connector is connected.  Symptom: endless stream of
messages reading like:

 musb_bus_suspend 2221: trying to suspend as a_wait_vrise is_active=1

Improve that musb bus suspend primitive a bit.  Take advantage of
this call to update the OTG state machine if appropriate, moving
the device out of the A_WAIT_VRISE state.  There's basically no
timer for that state transition just now, except with tusb6010;
that can make trouble.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix config-dependent compiler warning:

  CC      drivers/usb/gadget/pxa25x_udc.o
drivers/usb/gadget/pxa25x_udc.c: In function 'pxa25x_udc_irq':
drivers/usb/gadget/pxa25x_udc.c:1806: warning: array subscript is above array bounds
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use gpio_is_valid instead of assuming that every GPIO
number != 0 is valid while 0 is not.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Acked-by: NEric Miao <eric.y.miao@gmail.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Numbering for GPIOs on the pcf857x chips on the dm644x EVM board
changed when DaVinci chips with more GPIOs were supported.  Update
the GPIO number used for nVBUS_DRV.

Longer term, we need a better abstraction of board-specific setup in
this code so we're not hard-coding board specific GPIOs into the
driver, but for now this at least gets it back to working with
mainline davinci core code.
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Finish merging updates for DM355 chips into musb/davinci.c now
that its support is in mainline:  kick in new DRVVBUS controls.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Support OID_802_3_MAC_OPTIONS in gen_ndis_query_resp() of rndis.c to
make RNDIS gadget pass 1c_SetMulticast subtest in Microsoft NDISTest6:

  http://www.microsoft.com/whdc/DevTools/tools/NDIStest.mspx

The other tests in NDISTest6 are passed.

[ dbrownell@users.sourceforge.net: remove OID_802_3_MAXIMUM_LIST_SIZE
setting ... it was bogus, this code only handles one entry, not 32.
And we don't know what would break if we lied about that... ]
Signed-off-by: NHelen Chen <helen.chen@intel.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If an error is returned kfree must also be called.
Signed-off-by: NOliver Neukum <oliver@neukum.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We could just make the USB_OHCI_HCD_PPC_OF option implicit
and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE
and USB_OHCI_HCD_PPC_OF_LE are set.

[ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ]
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Tested-by: NSubrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

commit 1a1fab51 accidentally added the
device id to both tables in the driver, which causes problems as this is
only a single port device, not a multiple port device.

Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The audio gadget driver should use a "Linux" device id, instead
of relying on NetChip's vendor id.  So provide one out of our reserved
namespace.

Cc: Bryan Wu <cooloney@kernel.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This reverts commit 453f7755.

The driver should not have been accepted as the MSRT code is not
in the main kernel yet, which this depends on.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Hao Wu <hao.wu@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch added Qisda(VID) & H21/H20(PID) into to supporting list.
Please help to check this patch,

From: Brad Lu <Brad.Lu@Qisda.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add modem portion of USB device labeled:
Model iCON 210, Qualcomm 3G HSDPA, designed in EU by Option

Device starts in usb-storage mode (1e0e:f000) and requires the use of a tool
like usb_modeswitch to switch it to modem mode (1e0e:9000).
Signed-off-by: NKai Engert <kaie@kuix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The isp1760_plat_remove function is declared with __devexit, so the
.remove assignment needs to be wrapped with __devexit_p().
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is an update to the "usb-ehci-update-toggle-state-for-linked-qhs"
patch.  Since an HCD's endpoint_reset method can be called in
interrupt context, it mustn't assume that interrupts are enabled or
that it can sleep.

So we revert to the original way of refreshing QHs' toggle bits.  Now
the endpoint_reset method merely clears the toggle flag in the device
structure (as was done before) and starts an async QH unlink.  When the
QH is linked again, after the unlink finishes and an URB is queued,
the qh_refresh() routine will update the QH's toggle bit.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NDavid <david@unsolicited.net>
CC: David Brownell <david-b@pacbell.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

FHCI_PORT_DISABLED, -LOW and -FULL are mutually exclusive as status.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The product ID's for the following devices have been added:
- LOAD-n-GO
- ICD-U64
- PRIME-8
Signed-off-by: NJan Capek <jan@ccsinfo.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Move USB_GADGET_IMX to the right section of Kconfig as this
controller is available only as integrated on i.MX CPU.
Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I recently bought a PC interface for the Cressi Edy dive computer
(www.cressi.it) and discovered that it uses the pl2303 chip, albeit
with ad-hoc vendor and product ids (04b8, 0521 respectively). Being in
the process of writing a linux software for such device (cressi only
provides a windows software), I patched the pl2303 linux driver to
have the interface recognized. I am submitting you the patch (very
basic) for inclusion in next kernel version.

From: Gianpaolo Cugola <gianpaoloc@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This reverts commit 097041e5.

Trond had a better fix, which is the parent of this one ("Fix compile
error due to congestion_wait() changes")
Requested-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move the definition of BLK_RW_ASYNC/BLK_RW_SYNC into linux/backing-dev.h
so that it is available to all callers of set/clear_bdi_congested().

This replaces commit 097041e5 ("fuse:
Fix build error"), which will be reverted.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: NLarry Finger <Larry.Finger@lwfinger.net>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - targa and targa-2ch fix
  ALSA: hda - fix beep tone calculation for IDT/STAC codecs
  ALSA: hda - Missing volume controls for Intel HDA (ALC269/EeePC)
  ALSA: hda - Disable AMD SB600 64bit address support only
  ALSA: hda - Check widget types while parsing capture source in patch_via.c
  ALSA: hda - Fix capture source selection in patch_via.c
  ALSA: hda - Add missing EAPD initialization for VIA codecs
  ALSA: hda - Clean up VT170x dig-in initialization code
  ALSA: hda - Fix error path in the sanity check in azx_pcm_open()
  ALSA: hda - move 8086:fb30 quirk (stac9205) to the proper section
  ASoC: Fix wm8753 register cache size and initialization
  ASoC: add locking to mpc5200-psc-ac97 driver
  ASoC: Fix mpc5200-psc-ac97 to ensure the data ready bit is cleared
  ASoC: Fix register cache initialisation for WM8753

commit 5404ac8e ("isofs: cleanup mount
option processing") missed conversion of joliet option flag resulting
in non-working Joliet support.

CC: walt <w41ter@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

PL2303 has private data shovelling methods that also have no fast path. Fix
them to work the same way as the default handler.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The sysrq code acquired a kref leak. Fix it by passing the tty separately
from the caller (thus effectively using the callers kref which all the
callers hold anyway)
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We can't go around calling all sorts of magic per character functions at
full rate 3G data speed.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: fix compilation warnings
  UBI: fix NOR flash recovery
  UBI: nicify image sequence number handling
  UBI: add image sequence number to EC header
  UBI: remove bogus debugging checks
  UBI: add empty eraseblocks verification

* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: fix corruption dump
  UBIFS: clean up free space checking
  UBIFS: small amendments in the LEB scanning code
  UBIFS: dump a little more in case of corruptions
  MAINTAINERS: update ahunter's e-mail address
  UBIFS: allow more than one volume to be mounted
  UBIFS: fix assertion warning
  UBIFS: minor spelling and grammar fixes
  UBIFS: fix 64-bit divisions in debug print
  UBIFS: few spelling fixes
  UBIFS: set write-buffer timout to 3-5 seconds
  UBIFS: slightly optimize write-buffer timer usage
  UBIFS: improve debugging messaged
  UBIFS: fix integer overflow warning

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] define KTIME_SCALAR for 32-bit s390
  [S390] add generic atomic64 support for 31 bit
  [S390] improve suspend/resume error messages
  [S390] set SCHED_OMIT_FRAME_POINTER for s390
  [S390] add __ucmpdi2() helper function
  [S390] perf_counter build fix
  [S390] shutdown actions: save/return rc from init function
  [S390] dasd: correct debugfeature sense dump
  [S390] udelay: disable lockdep to avoid false positives
  [S390] monreader: fix dev_set_drvdata conversion
  [S390] sclp: fix compile error for !SCLP_CONSOLE

* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  osdblk: Adjust queue limits to lower device's limits
  osdblk: a Linux block device for OSD objects
  MAINTAINERS: Add osd maintained files (F:)
  exofs: Avoid using file_fsync()
  exofs: Remove IBM copyrights
  exofs: Fix bio leak in error handling path (sync read)

* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (22 commits)
  drm/i915: Fix for LVDS VBT change on IGDNG
  drm/i915: Zap the GTT mapping when transitioning from untiled to tiled.
  drm/i915: Refactor calls to unmap_mapping_range
  drm/i915: Avoid saving/restore the modesetting registers twice in KMS mode
  drm: Disable the unused connectors explicitly when resuming with KMS.
  drm/i915: Restore the KMS modeset for every activated CRTC
  drm/i915: Fix harmless warning from patch merged after i2c rework.
  drm/i915: Disable GEM when a broken video BIOS takes up the whole aperture.
  drm/i915: Check the LID device to decide whether the LVDS should be initialized
  drm/i915: Move lock to more reasonable location
  drm/i915: Add gtt_offset to gem object list debugfs output
  drm/i915: Remove gtt_bound from drm_i915_gem_object
  drm/i915: Disable VGA output when doing DRM_MODE_DPMS_OFF.
  drm/i915: crt fetch EDID by DVI-I converter on G4x platform
  drm/i915: Don't update display FIFO watermark on IGDNG
  drm/i915: Adjust DisplayPort clocks to use 96MHz reference
  drm/i915: Make driver less chatty
  drm/i915: fix up a raw 64bit divide
  drm/i915: enable sdvo lvds scaling function.
  drm/i915: Set SSC frequency for 8xx chips correctly
  ...

exception.txt only explains the code on x86, so it's better to
move it into Documentation/x86 directory.

And also rename it to exception-tables.txt which looks much
more reasonable.

This patch is on top of the previous one.
Signed-off-by: NWANG Cong <amwang@redhat.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update Documentation/exception.txt.
Remove trailing whitespaces in it.
Signed-off-by: NWANG Cong <amwang@redhat.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When building v2.6.31-rc2-344-g69ca06c9, the following build errors are
found due to missing includes:

 CC [M]  fs/fuse/dev.o
fs/fuse/dev.c: In function ‘request_end’:
fs/fuse/dev.c:289: error: ‘BLK_RW_SYNC’ undeclared (first use in this function)
...
fs/nfs/write.c: In function ‘nfs_set_page_writeback’:
fs/nfs/write.c:207: error: ‘BLK_RW_ASYNC’ undeclared (first use in this function)

Signed-off-by: Larry Finger@lwfinger.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cfq-iosched: reset oom_cfqq in cfq_set_request()
  block: fix sg SG_DXFER_TO_FROM_DEV regression
  block: call blk_scsi_ioctl_init()
  Fix congestion_wait() sync/async vs read/write confusion

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix disorder in cp count on error during deleting checkpoints
  nilfs2: fix lockdep warning between regular file and inode file
  nilfs2: fix incorrect KERN_CRIT messages in case of write failures
  nilfs2: fix hang problem of log writer which occurs after write failures
  nilfs2: remove unlikely directive causing mis-conversion of error code

Merge branch 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  dma-debug: Fix the overlap() function to be correct and readable
  oprofile: reset bt_lost_no_mapping with other stats
  x86/oprofile: rename kernel parameter for architectural perfmon to arch_perfmon
  signals: declare sys_rt_tgsigqueueinfo in syscalls.h
  rcu: Mark Hierarchical RCU no longer experimental
  dma-debug: Put all hash-chain locks into the same lock class
  dma-debug: fix off-by-one error in overlap function

Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits)
  perf report: Add "Fractal" mode output - support callchains with relative overhead rate
  perf_counter tools: callchains: Manage the cumul hits on the fly
  perf report: Change default callchain parameters
  perf report: Use a modifiable string for default callchain options
  perf report: Warn on callchain output request from non-callchain file
  x86: atomic64: Inline atomic64_read() again
  x86: atomic64: Clean up atomic64_sub_and_test() and atomic64_add_negative()
  x86: atomic64: Improve atomic64_xchg()
  x86: atomic64: Export APIs to modules
  x86: atomic64: Improve atomic64_read()
  x86: atomic64: Code atomic(64)_read and atomic(64)_set in C not CPP
  x86: atomic64: Fix unclean type use in atomic64_xchg()
  x86: atomic64: Make atomic_read() type-safe
  x86: atomic64: Reduce size of functions
  x86: atomic64: Improve atomic64_add_return()
  x86: atomic64: Improve cmpxchg8b()
  x86: atomic64: Improve atomic64_read()
  x86: atomic64: Move the 32-bit atomic64_t implementation to a .c file
  x86: atomic64: The atomic64_t data type should be 8 bytes aligned on 32-bit too
  perf report: Annotate variable initialization
  ...

Optimize cond_resched() by removing one conditional.

Currently cond_resched() checks system_state ==
SYSTEM_RUNNING in order to avoid scheduling before the
scheduler is running.

We can however, as per suggestion of Matt, use
PREEMPT_ACTIVE to accomplish that very same.
Suggested-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull the initial preempt_count value into a single
definition site.

Maintainers for: alpha, ia64 and m68k, please have a look,
your arch code is funny.

The header magic is a bit odd, but similar to the KERNEL_DS
one, CPP waits with expanding these macros until the
INIT_THREAD_INFO macro itself is expanded, which is in
arch/*/kernel/init_task.c where we've already included
sched.h so we're good.

Cc: tony.luck@intel.com
Cc: rth@twiddle.net
Cc: geert@linux-m68k.org
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>