The idea is quite similar to the old functions, but note that the _fixed
function wasn't "fixed" as in that it would generate a packet with a fixed
size, but rather limited/bounded to PMTU.

Also, now with sctp_mtu_payload(), we have a more accurate limit.
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And do so if the skb doesn't have enough space for the payload.
This is a preparation for the next patch.
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Yixun Lan says:

====================
net: stmmac: dwmac-meson: 100M phy mode support for AXG SoC

Due to the dwmac glue layer register changed, we need to
introduce a new compatible name for the Meson-AXG SoC
to support for the RMII 100M ethernet PHY.

Change since v1 at [1]:
  - implement set_phy_mode() for each SoC

[1] https://lkml.kernel.org/r/20180426160508.29380-1-yixun.lan@amlogic.com
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the Meson-AXG SoC, the phy mode setting of PRG_ETH0 in the glue layer
is extended from bit[0] to bit[2:0].
  There is no problem if we configure it to the RGMII 1000M PHY mode,
since the register setting is coincidentally compatible with previous one,
but for the RMII 100M PHY mode, the configuration need to be changed to
value - b100.
  This patch was verified with a RTL8201F 100M ethernet PHY.
Signed-off-by: NYixun Lan <yixun.lan@amlogic.com>
Acked-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to introduce a new compatible name for the Meson-AXG SoC
in order to support the RMII 100M ethernet PHY, since the PRG_ETH0
register of the dwmac glue layer is changed from previous old SoC.
Signed-off-by: NYixun Lan <yixun.lan@amlogic.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Christian Brauner says:

====================
netns: uevent filtering

This is the new approach to uevent filtering as discussed (see the
threads in [1], [2], and [3]). It only contains *non-functional
changes*.

This series deals with with fixing up uevent filtering logic:
- uevent filtering logic is simplified
- locking time on uevent_sock_list is minimized
- tagged and untagged kobjects are handled in separate codepaths
- permissions for userspace are fixed for network device uevents in
  network namespaces owned by non-initial user namespaces
  Udev is now able to see those events correctly which it wasn't before.
  For example, moving a physical device into a network namespace not
  owned by the initial user namespaces before gave:

  root@xen1:~# udevadm --debug monitor -k
  calling: monitor
  monitor will print the received events for:
  KERNEL - the kernel uevent

  sender uid=65534, message ignored
  sender uid=65534, message ignored
  sender uid=65534, message ignored
  sender uid=65534, message ignored
  sender uid=65534, message ignored

  and now after the discussion and solution in [3] correctly gives:

  root@xen1:~# udevadm --debug monitor -k
  calling: monitor
  monitor will print the received events for:
  KERNEL - the kernel uevent

  KERNEL[625.301042] add      /devices/pci0000:00/0000:00:02.0/0000:01:00.1/net/enp1s0f1 (net)
  KERNEL[625.301109] move     /devices/pci0000:00/0000:00:02.0/0000:01:00.1/net/enp1s0f1 (net)
  KERNEL[625.301138] move     /devices/pci0000:00/0000:00:02.0/0000:01:00.1/net/eth1 (net)
  KERNEL[655.333272] remove /devices/pci0000:00/0000:00:02.0/0000:01:00.1/net/eth1 (net)

Thanks!
Christian

[1]: https://lkml.org/lkml/2018/4/4/739
[2]: https://lkml.org/lkml/2018/4/26/767
[3]: https://lkml.org/lkml/2018/4/26/738
====================
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 07e98962 ("kobject: Send hotplug events in all network namespaces")

enabled sending hotplug events into all network namespaces back in 2010.
Over time the set of uevents that get sent into all network namespaces has
shrunk. We have now reached the point where hotplug events for all devices
that carry a namespace tag are filtered according to that namespace.
Specifically, they are filtered whenever the namespace tag of the kobject
does not match the namespace tag of the netlink socket.
Currently, only network devices carry namespace tags (i.e. network
namespace tags). Hence, uevents for network devices only show up in the
network namespace such devices are created in or moved to.

However, any uevent for a kobject that does not have a namespace tag
associated with it will not be filtered and we will broadcast it into all
network namespaces. This behavior stopped making sense when user namespaces
were introduced.

This patch simplifies and fixes couple of things:
- Split codepath for sending uevents by kobject namespace tags:
  1. Untagged kobjects - uevent_net_broadcast_untagged():
     Untagged kobjects will be broadcast into all uevent sockets recorded
     in uevent_sock_list, i.e. into all network namespacs owned by the
     intial user namespace.
  2. Tagged kobjects - uevent_net_broadcast_tagged():
     Tagged kobjects will only be broadcast into the network namespace they
     were tagged with.
  Handling of tagged kobjects in 2. does not cause any semantic changes.
  This is just splitting out the filtering logic that was handled by
  kobj_bcast_filter() before.
  Handling of untagged kobjects in 1. will cause a semantic change. The
  reasons why this is needed and ok have been discussed in [1]. Here is a
  short summary:
  - Userspace ignores uevents from network namespaces that are not owned by
    the intial user namespace:
    Uevents are filtered by userspace in a user namespace because the
    received uid != 0. Instead the uid associated with the event will be
    65534 == "nobody" because the global root uid is not mapped.
    This means we can safely and without introducing regressions modify the
    kernel to not send uevents into all network namespaces whose owning
    user namespace is not the initial user namespace because we know that
    userspace will ignore the message because of the uid anyway.
    I have a) verified that is is true for every udev implementation out
    there b) that this behavior has been present in all udev
    implementations from the very beginning.
  - Thundering herd:
    Broadcasting uevents into all network namespaces introduces significant
    overhead.
    All processes that listen to uevents running in non-initial user
    namespaces will end up responding to uevents that will be meaningless
    to them. Mainly, because non-initial user namespaces cannot easily
    manage devices unless they have a privileged host-process helping them
    out. This means that there will be a thundering herd of activity when
    there shouldn't be any.
  - Removing needless overhead/Increasing performance:
    Currently, the uevent socket for each network namespace is added to the
    global variable uevent_sock_list. The list itself needs to be protected
    by a mutex. So everytime a uevent is generated the mutex is taken on
    the list. The mutex is held *from the creation of the uevent (memory
    allocation, string creation etc. until all uevent sockets have been
    handled*. This is aggravated by the fact that for each uevent socket
    that has listeners the mc_list must be walked as well which means we're
    talking O(n^2) here. Given that a standard Linux workload usually has
    quite a lot of network namespaces and - in the face of containers - a
    lot of user namespaces this quickly becomes a performance problem (see
    "Thundering herd" above). By just recording uevent sockets of network
    namespaces that are owned by the initial user namespace we
    significantly increase performance in this codepath.
  - Injecting uevents:
    There's a valid argument that containers might be interested in
    receiving device events especially if they are delegated to them by a
    privileged userspace process. One prime example are SR-IOV enabled
    devices that are explicitly designed to be handed of to other users
    such as VMs or containers.
    This use-case can now be correctly handled since
    commit 692ec06d ("netns: send uevent messages"). This commit
    introduced the ability to send uevents from userspace. As such we can
    let a sufficiently privileged (CAP_SYS_ADMIN in the owning user
    namespace of the network namespace of the netlink socket) userspace
    process make a decision what uevents should be sent. This removes the
    need to blindly broadcast uevents into all user namespaces and provides
    a performant and safe solution to this problem.
  - Filtering logic:
    This patch filters by *owning user namespace of the network namespace a
    given task resides in* and not by user namespace of the task per se.
    This means if the user namespace of a given task is unshared but the
    network namespace is kept and is owned by the initial user namespace a
    listener that is opening the uevent socket in that network namespace
    can still listen to uevents.
- Fix permission for tagged kobjects:
  Network devices that are created or moved into a network namespace that
  is owned by a non-initial user namespace currently are send with
  INVALID_{G,U}ID in their credentials. This means that all current udev
  implementations in userspace will ignore the uevent they receive for
  them. This has lead to weird bugs whereby new devices showing up in such
  network namespaces were not recognized and did not get IPs assigned etc.
  This patch adjusts the permission to the appropriate {g,u}id in the
  respective user namespace. This way udevd is able to correctly handle
  such devices.
- Simplify filtering logic:
  do_one_broadcast() already ensures that only listeners in mc_list receive
  uevents that have the same network namespace as the uevent socket itself.
  So the filtering logic in kobj_bcast_filter is not needed (see [3]). This
  patch therefore removes kobj_bcast_filter() and replaces
  netlink_broadcast_filtered() with the simpler netlink_broadcast()
  everywhere.

[1]: https://lkml.org/lkml/2018/4/4/739
[2]: https://lkml.org/lkml/2018/4/26/767
[3]: https://lkml.org/lkml/2018/4/26/738Signed-off-by: NChristian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds alloc_uevent_skb() in preparation for follow up patches.
Signed-off-by: NChristian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Boris Pismenny says:

====================
TLS offload, netdev & MLX5 support

The following series provides TLS TX inline crypto offload.

v1->v2:
   - Added IS_ENABLED(CONFIG_TLS_DEVICE) and a STATIC_KEY for icsk_clean_acked
   - File license fix
   - Fix spelling, comment by DaveW
   - Move memory allocations out of tls_set_device_offload and other misc fixes,
	comments by Kiril.

v2->v3:
   - Reversed xmas tree where needed and style fixes
   - Removed the need for skb_page_frag_refill, per Eric's comment
   - IPv6 dependency fixes

v3->v4:
   - Remove "inline" from functions in C files
   - Make clean_acked_data_enabled a static variable and add enable/disable functions to control it.
   - Remove unnecessary variable initialization mentioned by ShannonN
   - Rebase over TLS RX
   - Refactor the tls_software_fallback to reduce the number of variables mentioned by KirilT

v4->v5:
   - Add missing CONFIG_TLS_DEVICE

v5->v6:
   - Move changes to the software implementation into a seperate patch
   - Fix some checkpatch warnings
   - GPL export the enable/disable clean_acked_data functions

v6->v7:
   - Use the dst_entry to obtain the netdev in dev_get_by_index
   - Remove the IPv6 patch since it is redundent now

v7->v8:
   - Fix a merge conflict in mlx5 header

v8->v9:
   - Fix false -Wmaybe-uninitialized warning
   - Fix empty space in the end of new files

v9->v10:
   - Remove default "n" in net/Kconfig

This series adds a generic infrastructure to offload TLS crypto to a
network devices. It enables the kernel TLS socket to skip encryption and
authentication operations on the transmit side of the data path. Leaving
those computationally expensive operations to the NIC.

The NIC offload infrastructure builds TLS records and pushes them to the
TCP layer just like the SW KTLS implementation and using the same API.
TCP segmentation is mostly unaffected. Currently the only exception is
that we prevent mixed SKBs where only part of the payload requires
offload. In the future we are likely to add a similar restriction
following a change cipher spec record.

The notable differences between SW KTLS and NIC offloaded TLS
implementations are as follows:
1. The offloaded implementation builds "plaintext TLS record", those
records contain plaintext instead of ciphertext and place holder bytes
instead of authentication tags.
2. The offloaded implementation maintains a mapping from TCP sequence
number to TLS records. Thus given a TCP SKB sent from a NIC offloaded
TLS socket, we can use the tls NIC offload infrastructure to obtain
enough context to encrypt the payload of the SKB.
A TLS record is released when the last byte of the record is ack'ed,
this is done through the new icsk_clean_acked callback.

The infrastructure should be extendable to support various NIC offload
implementations.  However it is currently written with the
implementation below in mind:
The NIC assumes that packets from each offloaded stream are sent as
plaintext and in-order. It keeps track of the TLS records in the TCP
stream. When a packet marked for offload is transmitted, the NIC
encrypts the payload in-place and puts authentication tags in the
relevant place holders.

The responsibility for handling out-of-order packets (i.e. TCP
retransmission, qdisc drops) falls on the netdev driver.

The netdev driver keeps track of the expected TCP SN from the NIC's
perspective.  If the next packet to transmit matches the expected TCP
SN, the driver advances the expected TCP SN, and transmits the packet
with TLS offload indication.

If the next packet to transmit does not match the expected TCP SN. The
driver calls the TLS layer to obtain the TLS record that includes the
TCP of the packet for transmission. Using this TLS record, the driver
posts a work entry on the transmit queue to reconstruct the NIC TLS
state required for the offload of the out-of-order packet. It updates
the expected TCP SN accordingly and transmit the now in-order packet.
The same queue is used for packet transmission and TLS context
reconstruction to avoid the need for flushing the transmit queue before
issuing the context reconstruction request.

Expected TCP SN is accessed without a lock, under the assumption that
TCP doesn't transmit SKBs from different TX queue concurrently.

If packets are rerouted to a different netdevice, then a software
fallback routine handles encryption.

Paper: https://www.netdevconf.org/1.2/papers/netdevconf-TLS.pdf
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBoris Pismenny <borisp@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBoris Pismenny <borisp@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add statistics for rare TLS related errors.
Since the errors are rare we have a counter per netdev
rather then per SQ.
Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com>
Signed-off-by: NBoris Pismenny <borisp@mellanox.com>
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement the TLS tx offload data path according to the
requirements of the TLS generic NIC offload infrastructure.

Special metadata ethertype is used to pass information to
the hardware.
Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com>
Signed-off-by: NBoris Pismenny <borisp@mellanox.com>
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add NETIF_F_HW_TLS_TX capability and expose tlsdev_ops to work with the
TLS generic NIC offload infrastructure.
The NETIF_F_HW_TLS_TX capability will be added in the next patch.
Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com>
Signed-off-by: NBoris Pismenny <borisp@mellanox.com>
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add routines for manipulating TLS TX offload contexts.

In Innova TLS, TLS contexts are added or deleted
via a command message over the SBU connection.
The HW then sends a response message over the same connection.

Add implementation for Innova TLS (FPGA-based) hardware.

These routines will be used by the TLS offload support in a later patch

mlx5/accel is a middle acceleration layer to allow mlx5e and other ULPs
to work directly with mlx5_core rather than Innova FPGA or other mlx5
acceleration providers.

In the future, when IPSec/TLS or any other acceleration gets integrated
into ConnectX chip, mlx5/accel layer will provide the integrated
acceleration, rather than the Innova one.
Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com>
Signed-off-by: NBoris Pismenny <borisp@mellanox.com>
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The defines are not IPSEC specific.
Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com>
Signed-off-by: NBoris Pismenny <borisp@mellanox.com>
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a generic infrastructure to offload TLS crypto to a
network device. It enables the kernel TLS socket to skip encryption
and authentication operations on the transmit side of the data path.
Leaving those computationally expensive operations to the NIC.

The NIC offload infrastructure builds TLS records and pushes them to
the TCP layer just like the SW KTLS implementation and using the same
API.
TCP segmentation is mostly unaffected. Currently the only exception is
that we prevent mixed SKBs where only part of the payload requires
offload. In the future we are likely to add a similar restriction
following a change cipher spec record.

The notable differences between SW KTLS and NIC offloaded TLS
implementations are as follows:
1. The offloaded implementation builds "plaintext TLS record", those
records contain plaintext instead of ciphertext and place holder bytes
instead of authentication tags.
2. The offloaded implementation maintains a mapping from TCP sequence
number to TLS records. Thus given a TCP SKB sent from a NIC offloaded
TLS socket, we can use the tls NIC offload infrastructure to obtain
enough context to encrypt the payload of the SKB.
A TLS record is released when the last byte of the record is ack'ed,
this is done through the new icsk_clean_acked callback.

The infrastructure should be extendable to support various NIC offload
implementations.  However it is currently written with the
implementation below in mind:
The NIC assumes that packets from each offloaded stream are sent as
plaintext and in-order. It keeps track of the TLS records in the TCP
stream. When a packet marked for offload is transmitted, the NIC
encrypts the payload in-place and puts authentication tags in the
relevant place holders.

The responsibility for handling out-of-order packets (i.e. TCP
retransmission, qdisc drops) falls on the netdev driver.

The netdev driver keeps track of the expected TCP SN from the NIC's
perspective.  If the next packet to transmit matches the expected TCP
SN, the driver advances the expected TCP SN, and transmits the packet
with TLS offload indication.

If the next packet to transmit does not match the expected TCP SN. The
driver calls the TLS layer to obtain the TLS record that includes the
TCP of the packet for transmission. Using this TLS record, the driver
posts a work entry on the transmit queue to reconstruct the NIC TLS
state required for the offload of the out-of-order packet. It updates
the expected TCP SN accordingly and transmits the now in-order packet.
The same queue is used for packet transmission and TLS context
reconstruction to avoid the need for flushing the transmit queue before
issuing the context reconstruction request.
Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com>
Signed-off-by: NBoris Pismenny <borisp@mellanox.com>
Signed-off-by: NAviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In TLS inline crypto, we can have one direction in software
and another in hardware. Thus, we split the TLS configuration to separate
structures for receive and transmit.
Signed-off-by: NBoris Pismenny <borisp@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a netdev feature to configure TLS TX offloads.
Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com>
Signed-off-by: NBoris Pismenny <borisp@mellanox.com>
Signed-off-by: NAviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add new netdev ops to add and delete tls context
Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com>
Signed-off-by: NBoris Pismenny <borisp@mellanox.com>
Signed-off-by: NAviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With socket dependent offloads we rely on the netdev to transform
the transmitted packets before sending them to the wire.
When a packet from an offloaded socket is rerouted to a different
device we need to detect it and do the transformation in software.
Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com>
Signed-off-by: NBoris Pismenny <borisp@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

copy_skb_header is renamed to skb_copy_header and
exported. Exposing this function give more flexibility
in copying SKBs.
skb_copy and skb_copy_expand do not give enough control
over which parts are copied.
Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com>
Signed-off-by: NBoris Pismenny <borisp@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Called when a TCP segment is acknowledged.
Could be used by application protocols who hold additional
metadata associated with the stream data.

This is required by TLS device offload to release
metadata associated with acknowledged TLS records.
Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com>
Signed-off-by: NBoris Pismenny <borisp@mellanox.com>
Signed-off-by: NAviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2018-04-30

This series contains updates to i40e and i40evf only.

Jia-Ju Bai replaces an instance of GFP_ATOMIC to GFP_KERNEL, since
i40evf is not in atomic context when i40evf_add_vlan() is called.

Jake cleans up function header comments to ensure that the function
parameter comments actually match the function parameters.  Fixed a
possible overflow error in the PTP clock code.  Fixed warnings regarding
restricted __be32 type usage.

Mariusz fixes the reading of the LLDP configuration, which moves from
using relative values to calculating the absolute address.

Jakub adds a check for 10G LR mode for i40e.

Paweł fixes an issue, where changing the MTU would turn on TSO, GSO and
GRO.

Alex fixes a couple of issues with the UDP tunnel filter configuration.
First being that the tunnels did not have mutual exclusion in place to
prevent a race condition between a user request to add/remove a port and
an update.  The second issue was we were deleting filters that were not
associated with the actual filter we wanted to delete.

Harshitha ensures that the queue map sent by the VF is taken into
account when enabling/disabling queues in the VF VSI.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: SPAN: Support routes pointing at bridges

Petr says:

When mirroring to a gretap or ip6gretap netdevice, the route that
directs the encapsulated packets can reference a bridge. In that case,
in the software model, the packet is switched.

Thus when offloading mirroring like that, take into consideration FDB,
STP, PVID configured at the bridge, and whether that VLAN ID should be
tagged on egress.

Patch #1 introduces functions to get bridge PVID, VLAN flags and to look
up an FDB entry.

Patches #2 and #3 refactor some existing code and introduce a new
accessor function.

With patches #4 and #5 mlxsw calls mlxsw_sp_span_respin() on switchdev
events as well. There is no impact yet, because bridge as an underlay
device is still not allowed.

That is implemented in patch #6, which uses the new interfaces to figure
out on which one port the mirroring should be configured, and whether
the mirrored packets should be VLAN-tagged and how.

Changes from v2 to v3:

- Rename the suite of bridge accessor function to br_vlan_get_pvid(),
  br_vlan_get_info() and br_fdb_find_port(). The _get bit is to avoid
  clashing with an existing static function.

Changes from v1 to v2:

- Change the suite of bridge accessor functions to br_vlan_pvid_rtnl(),
  br_vlan_info_rtnl(), br_fdb_find_port_rtnl().
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When handling mirroring to a gretap or ip6gretap netdevice in mlxsw, the
underlay address (i.e. the remote address of the tunnel) may be routed
to a bridge.

In that case, look up the resolved neighbor Ethernet address in that
bridge's FDB. Then configure the offload to direct the mirrored traffic
to that port, possibly with tagging.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Changes to switchdev artifact can make a SPAN entry offloadable or
unoffloadable. To that end:

- Listen to SWITCHDEV_FDB_*_TO_BRIDGE notifications in addition to
  the *_TO_DEVICE ones, to catch whatever activity is sent to the
  bridge (likely by mlxsw itself).

  On each FDB notification, respin SPAN to reconcile it with the FDB
  changes.

- Also respin on switchdev port attribute changes (which currently
  covers changes to STP state of ports) and port object additions and
  removals.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since switchdev events can trigger SPAN respin, it is necessary that the
data structures are available. Register SPAN first, with a commentary on
what the dependencies are.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Publish the existing function mlxsw_sp_bridge_port_find(), and add
another service accessor mlxsw_sp_bridge_port_stp_state(). Publish both
in a new file spectrum_switchdev.h.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of duplicating the decision regarding port forwarding state made
by mlxsw_sp_port_vid_stp_set(), extract the decision-making into a new
function and reuse.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a couple new functions to allow querying FDB and vlan settings of a
bridge.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix warnings regarding restricted __be32 type usage by strictly
specifying the type of the ipv4 address being printed in the dev_err
statement.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The expectation of the ops VIRTCHNL_OP_ENABLE_QUEUES and
VIRTCHNL_OP_DISABLE_QUEUES is that the queue map sent by
the VF is taken into account when enabling/disabling
queues in the VF VSI. This patch makes sure that happens.

By breaking out the individual queue set up functions so
that they can be called directly from the i40e_virtchnl_pf.c
file, only the queues as specified by the queue bit map that
accompanies the enable/disable queues ops will be handled.
Signed-off-by: NHarshitha Ramamurthy <harshitha.ramamurthy@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

When operating at 1GbE, the base incval for the PTP clock is so large
that multiplying it by numbers close to the max_adj can overflow the
u64.

Rather than attempting to limit the max_adj to a value small enough to
avoid overflow, instead calculate the incvalue adjustment based on the
40GbE incvalue, and then multiply that by the scaling factor for the
link speed.

This sacrifices a small amount of precision in the adjustment but we
avoid erratic behavior of the clock due to the overflow caused if ppb is
very near the maximum adjustment.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This fixes at least 2 issues I have found with the UDP tunnel filter
configuration.

The first issue is the fact that the tunnels didn't have any sort of mutual
exclusion in place to prevent an update from racing with a user request to
add/remove a port. As such you could request to add and remove a port
before the port update code had a chance to respond which would result in a
very confusing result. To address it I have added 2 changes. First I added
the RTNL mutex wrapper around our updating of the pending, port, and
filter_index bits. Second I added logic so that we cannot use a port that
has a pending deletion since we need to free the space in hardware before
we can allow software to reuse it.

The second issue addressed is the fact that we were not recording the
actual filter index provided to us by the admin queue. As a result we were
deleting filters that were not associated with the actual filter we wanted
to delete. To fix that I added a filter_index member to the UDP port
tracking structure.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fixes the problem where each MTU change turns TSO,
GSO and GRO on from off state.

Now when TSO, GSO or GRO is turned off, MTU change does not
turn them on.
Signed-off-by: NPaweł Jabłoński <pawel.jablonski@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The advertising 10G LR mode should be possible to set
but in the function i40e_set_link_ksettings() check for this
is missed. This patch adds check for 10000baseLR_Full
flag for 10G modes.
Signed-off-by: NJakub Pawlak <jakub.pawlak@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The seg6_make_flowlabel() is used by seg6_do_srh_encap() to compute the
flowlabel from a given skb. It relies on skb_get_hash() which eventually
calls __skb_flow_dissect() to extract the flow_keys struct values from
the skb.

In case of IPv4 traffic, calling seg6_make_flowlabel() after skb_push(),
skb_reset_network_header(), and skb_mac_header_rebuild() will results in
flow_keys struct of all key values set to zero.

This patch calls seg6_make_flowlabel() before resetting the headers of skb
to get the right key values.

Extracted Key values are based on the type inner packet as follows:
1) IPv6 traffic: src_IP, dst_IP, L4 proto, and flowlabel of inner packet.
2) IPv4 traffic: src_IP, dst_IP, L4 proto, src_port, and dst_port
3) L2 traffic: depends on what kind of traffic carried into the L2
frame. IPv6 and IPv4 traffic works as discussed 1) and 2)

Here a hex_dump of struct flow_keys for IPv4 and IPv6 traffic
10.100.1.100: 47302 > 30.0.0.2: 5001
00000000: 14 00 02 00 00 00 00 00 08 00 11 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 13 89 b8 c6 1e 00 00 02
00000020: 0a 64 01 64

fc00:a1:a > b2::2
00000000: 28 00 03 00 00 00 00 00 86 dd 11 00 99 f9 02 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 b2 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 02 fc 00 00 a1
00000030: 00 00 00 00 00 00 00 00 00 00 00 0a
Signed-off-by: NAhmed Abdelsalam <amsalam20@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previous method for reading LLDP config was based on hard-coded
offsets. It happened to work, because of structured architecture of
the NVM memory. In the new approach, known as FLAT, we need to
calculate the absolute address, instead of using relative values.
Needed defines for memory location were added.
Signed-off-by: NMariusz Stachura <mariusz.stachura@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Recent versions of the Linux kernel now warn about incorrect parameter
definitions for function comments. Fix up several function comments to
correctly reflect the current function arguments. This cleans up the
warnings and helps ensure our documentation is accurate.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>