The new reservation mode for interrupts assigns a dummy vector when the
interrupt is allocated and assigns a real vector when the interrupt is
requested. The reservation mode prevents vector pressure when devices with
a large amount of queues/interrupts are initialized, but only a minimal
subset of those queues/interrupts is actually used.

This mode has an issue with MSI interrupts which cannot be masked. If the
driver is not careful or the hardware emits an interrupt before the device
irq is requestd by the driver then the interrupt ends up on the dummy
vector as a spurious interrupt which can cause malfunction of the device or
in the worst case a lockup of the machine.

Change the logic for the reservation mode so that the early activation of
MSI interrupts checks whether:

 - the device is a PCI/MSI device
 - the reservation mode of the underlying irqdomain is activated
 - PCI/MSI masking is globally enabled
 - the PCI/MSI device uses either MSI-X, which supports masking, or
   MSI with the maskbit supported.

If one of those conditions is false, then clear the reservation mode flag
in the irq data of the interrupt and invoke irq_domain_activate_irq() with
the reserve argument cleared. In the x86 vector code, clear the can_reserve
flag in the vector allocation data so a subsequent free_irq() won't create
the same situation again. The interrupt stays assigned to a real vector
until pci_disable_msi() is invoked and all allocations are undone.

Fixes: 4900be83 ("x86/vector/msi: Switch to global reservation mode")
Reported-by: NAlexandru Chirvasitu <achirvasub@gmail.com>
Reported-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NAlexandru Chirvasitu <achirvasub@gmail.com>
Tested-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Mikael Pettersson <mikpelinux@gmail.com>
Cc: Josh Poulson <jopoulso@microsoft.com>
Cc: Mihai Costache <v-micos@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-pci@vger.kernel.org
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Simon Xiao <sixiao@microsoft.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: devel@linuxdriverproject.org
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Sakari Ailus <sakari.ailus@intel.com>,
Cc: linux-media@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712291406420.1899@nanos
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712291409460.1899@nanos

The 'early' argument of irq_domain_activate_irq() is actually used to
denote reservation mode. To avoid confusion, rename it before abuse
happens.

No functional change.

Fixes: 72491643 ("genirq/irqdomain: Update irq_domain_ops.activate() signature")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Alexandru Chirvasitu <achirvasub@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Mikael Pettersson <mikpelinux@gmail.com>
Cc: Josh Poulson <jopoulso@microsoft.com>
Cc: Mihai Costache <v-micos@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-pci@vger.kernel.org
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Simon Xiao <sixiao@microsoft.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: devel@linuxdriverproject.org
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Sakari Ailus <sakari.ailus@intel.com>,
Cc: linux-media@vger.kernel.org

Add a new flag to mark interrupts which can use reservation mode. This is
going to be used in subsequent patches to disable reservation mode for a
certain class of MSI devices.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NAlexandru Chirvasitu <achirvasub@gmail.com>
Tested-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Mikael Pettersson <mikpelinux@gmail.com>
Cc: Josh Poulson <jopoulso@microsoft.com>
Cc: Mihai Costache <v-micos@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-pci@vger.kernel.org
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Simon Xiao <sixiao@microsoft.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: devel@linuxdriverproject.org
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Sakari Ailus <sakari.ailus@intel.com>,
Cc: linux-media@vger.kernel.org

When analyzing the fallout of the x86 vector allocation rework it turned
out that the error handling in msi_domain_alloc_irqs() is broken.

If MSI_FLAG_MUST_REACTIVATE is set for a MSI domain then it clears the
activation flag for a successfully initialized msi descriptor. If a
subsequent initialization fails then the error handling code path does not
deactivate the interrupt because the activation flag got cleared.

Move the clearing of the activation flag outside of the initialization loop
so that an eventual failure can be cleaned up correctly.

Fixes: 22d0b12f ("genirq/irqdomain: Add force reactivation flag to irq domains")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NAlexandru Chirvasitu <achirvasub@gmail.com>
Tested-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Mikael Pettersson <mikpelinux@gmail.com>
Cc: Josh Poulson <jopoulso@microsoft.com>
Cc: Mihai Costache <v-micos@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-pci@vger.kernel.org
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Simon Xiao <sixiao@microsoft.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: devel@linuxdriverproject.org
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Sakari Ailus <sakari.ailus@intel.com>,
Cc: linux-media@vger.kernel.org

An interrupt storm on a bad interrupt will cause the kernel
log to be clogged.

[   60.089234] ->handle_irq():  ffffffffbe2f803f,
[   60.090455] 0xffffffffbf2af380
[   60.090510] handle_bad_irq+0x0/0x2e5
[   60.090522] ->irq_data.chip(): ffffffffbf2af380,
[   60.090553]    IRQ_NOPROBE set
[   60.090584] ->handle_irq():  ffffffffbe2f803f,
[   60.090590] handle_bad_irq+0x0/0x2e5
[   60.090596] ->irq_data.chip(): ffffffffbf2af380,
[   60.090602] 0xffffffffbf2af380
[   60.090608] ->action():           (null)
[   60.090779] handle_bad_irq+0x0/0x2e5

This was seen when running an upstream kernel on Acer Chromebook R11.  The
system was unstable as result.

Guard the log message with __printk_ratelimit to reduce the impact.  This
won't prevent the interrupt storm from happening, but at least the system
remains stable.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dtor@chromium.org>
Cc: Joe Perches <joe@perches.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197953
Link: https://lkml.kernel.org/r/1512234784-21038-1-git-send-email-linux@roeck-us.net

Since the recent remote cpufreq callback work, its possible that a cpufreq
update is triggered from a remote CPU. For single policies however, the current
code uses the local CPU when trying to determine if the remote sg_cpu entered
idle or is busy. This is incorrect. To remedy this, compare with the nohz tick
idle_calls counter of the remote CPU.

Fixes: 674e7541 (sched: cpufreq: Allow remote cpufreq callbacks)
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NJoel Fernandes <joelaf@google.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The IRQ code already has support for lockdep class for the lock mutex
in an interrupt descriptor. Extend this to add a second class for the
request mutex in the descriptor. Not having a class is resulting in
false positive splats in some code paths.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: linus.walleij@linaro.org
Cc: grygorii.strashko@ti.com
Cc: f.fainelli@gmail.com
Link: https://lkml.kernel.org/r/1512234664-21555-1-git-send-email-andrew@lunn.ch

Jing Xia and Chunyan Zhang reported that on failing to allocate part of the
tracing buffer, memory is freed, but the pointers that point to them are not
initialized back to NULL, and later paths may try to free the freed memory
again. Jing and Chunyan fixed one of the locations that does this, but
missed a spot.

Link: http://lkml.kernel.org/r/20171226071253.8968-1-chunyan.zhang@spreadtrum.com

Cc: stable@vger.kernel.org
Fixes: 737223fb ("tracing: Consolidate buffer allocation code")
Reported-by: NJing Xia <jing.xia@spreadtrum.com>
Reported-by: NChunyan Zhang <chunyan.zhang@spreadtrum.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Double free of the ring buffer happens when it fails to alloc new
ring buffer instance for max_buffer if TRACER_MAX_TRACE is configured.
The root cause is that the pointer is not set to NULL after the buffer
is freed in allocate_trace_buffers(), and the freeing of the ring
buffer is invoked again later if the pointer is not equal to Null,
as:

instance_mkdir()
    |-allocate_trace_buffers()
        |-allocate_trace_buffer(tr, &tr->trace_buffer...)
	|-allocate_trace_buffer(tr, &tr->max_buffer...)

          // allocate fail(-ENOMEM),first free
          // and the buffer pointer is not set to null
        |-ring_buffer_free(tr->trace_buffer.buffer)

       // out_free_tr
    |-free_trace_buffers()
        |-free_trace_buffer(&tr->trace_buffer);

	      //if trace_buffer is not null, free again
	    |-ring_buffer_free(buf->buffer)
                |-rb_free_cpu_buffer(buffer->buffers[cpu])
                    // ring_buffer_per_cpu is null, and
                    // crash in ring_buffer_per_cpu->pages

Link: http://lkml.kernel.org/r/20171226071253.8968-1-chunyan.zhang@spreadtrum.com

Cc: stable@vger.kernel.org
Fixes: 737223fb ("tracing: Consolidate buffer allocation code")
Signed-off-by: NJing Xia <jing.xia@spreadtrum.com>
Signed-off-by: NChunyan Zhang <chunyan.zhang@spreadtrum.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

To free the reader page that is allocated with ring_buffer_alloc_read_page(),
ring_buffer_free_read_page() must be called. For faster performance, this
page can be reused by the ring buffer to avoid having to free and allocate
new pages.

The issue arises when the page is used with a splice pipe into the
networking code. The networking code may up the page counter for the page,
and keep it active while sending it is queued to go to the network. The
incrementing of the page ref does not prevent it from being reused in the
ring buffer, and this can cause the page that is being sent out to the
network to be modified before it is sent by reading new data.

Add a check to the page ref counter, and only reuse the page if it is not
being used anywhere else.

Cc: stable@vger.kernel.org
Fixes: 73a757e6 ("ring-buffer: Return reader page back into existing ring buffer")
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

The ring_buffer_read_page() takes care of zeroing out any extra data in the
page that it returns. There's no need to zero it out again from the
consumer. It was removed from one consumer of this function, but
read_buffers_splice_read() did not remove it, and worse, it contained a
nasty bug because of it.

Cc: stable@vger.kernel.org
Fixes: 2711ca23 ("ring-buffer: Move zeroing out excess in page to ring buffer code")
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Two info bits were added to the "commit" part of the ring buffer data page
when returned to be consumed. This was to inform the user space readers that
events have been missed, and that the count may be stored at the end of the
page.

What wasn't handled, was the splice code that actually called a function to
return the length of the data in order to zero out the rest of the page
before sending it up to user space. These data bits were returned with the
length making the value negative, and that negative value was not checked.
It was compared to PAGE_SIZE, and only used if the size was less than
PAGE_SIZE. Luckily PAGE_SIZE is unsigned long which made the compare an
unsigned compare, meaning the negative size value did not end up causing a
large portion of memory to be randomly zeroed out.

Cc: stable@vger.kernel.org
Fixes: 66a8cb95 ("ring-buffer: Add place holder recording of dropped events")
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

In order to sanitize the LDT initialization on x86 arch_dup_mmap() must be
allowed to fail. Fix up all instances.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: dan.j.williams@intel.com
Cc: hughd@google.com
Cc: keescook@google.com
Cc: kirill.shutemov@linux.intel.com
Cc: linux-mm@kvack.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Do not allow root to convert valid pointers into unknown scalars.
In particular disallow:
 ptr &= reg
 ptr <<= reg
 ptr += ptr
and explicitly allow:
 ptr -= ptr
since pkt_end - pkt == length

1.
This minimizes amount of address leaks root can do.
In the future may need to further tighten the leaks with kptr_restrict.

2.
If program has such pointer math it's likely a user mistake and
when verifier complains about it right away instead of many instructions
later on invalid memory access it's easier for users to fix their progs.

3.
when register holding a pointer cannot change to scalar it allows JITs to
optimize better. Like 32-bit archs could use single register for pointers
instead of a pair required to hold 64-bit scalars.

4.
reduces architecture dependent behavior. Since code:
r1 = r10;
r1 &= 0xff;
if (r1 ...)
will behave differently arm64 vs x64 and offloaded vs native.

A significant chunk of ptr mangling was allowed by
commit f1174f77 ("bpf/verifier: rework value tracking")
yet some of it was allowed even earlier.
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

There were various issues related to the limited size of integers used in
the verifier:
 - `off + size` overflow in __check_map_access()
 - `off + reg->off` overflow in check_mem_access()
 - `off + reg->var_off.value` overflow or 32-bit truncation of
   `reg->var_off.value` in check_mem_access()
 - 32-bit truncation in check_stack_boundary()

Make sure that any integer math cannot overflow by not allowing
pointer math with large values.

Also reduce the scope of "scalar op scalar" tracking.

Fixes: f1174f77 ("bpf/verifier: rework value tracking")
Reported-by: NJann Horn <jannh@google.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This could be made safe by passing through a reference to env and checking
for env->allow_ptr_leaks, but it would only work one way and is probably
not worth the hassle - not doing it will not directly lead to program
rejection.

Fixes: f1174f77 ("bpf/verifier: rework value tracking")
Signed-off-by: NJann Horn <jannh@google.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Force strict alignment checks for stack pointers because the tracking of
stack spills relies on it; unaligned stack accesses can lead to corruption
of spilled registers, which is exploitable.

Fixes: f1174f77 ("bpf/verifier: rework value tracking")
Signed-off-by: NJann Horn <jannh@google.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Prevent indirect stack accesses at non-constant addresses, which would
permit reading and corrupting spilled pointers.

Fixes: f1174f77 ("bpf/verifier: rework value tracking")
Signed-off-by: NJann Horn <jannh@google.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

32-bit ALU ops operate on 32-bit values and have 32-bit outputs.
Adjust the verifier accordingly.

Fixes: f1174f77 ("bpf/verifier: rework value tracking")
Signed-off-by: NJann Horn <jannh@google.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Properly handle register truncation to a smaller size.

The old code first mirrors the clearing of the high 32 bits in the bitwise
tristate representation, which is correct. But then, it computes the new
arithmetic bounds as the intersection between the old arithmetic bounds and
the bounds resulting from the bitwise tristate representation. Therefore,
when coerce_reg_to_32() is called on a number with bounds
[0xffff'fff8, 0x1'0000'0007], the verifier computes
[0xffff'fff8, 0xffff'ffff] as bounds of the truncated number.
This is incorrect: The truncated number could also be in the range [0, 7],
and no meaningful arithmetic bounds can be computed in that case apart from
the obvious [0, 0xffff'ffff].

Starting with v4.14, this is exploitable by unprivileged users as long as
the unprivileged_bpf_disabled sysctl isn't set.

Debian assigned CVE-2017-16996 for this issue.

v2:
 - flip the mask during arithmetic bounds calculation (Ben Hutchings)
v3:
 - add CVE number (Ben Hutchings)

Fixes: b03c9f9f ("bpf/verifier: track signed and unsigned min/max values")
Signed-off-by: NJann Horn <jannh@google.com>
Acked-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Distinguish between
BPF_ALU64|BPF_MOV|BPF_K (load 32-bit immediate, sign-extended to 64-bit)
and BPF_ALU|BPF_MOV|BPF_K (load 32-bit immediate, zero-padded to 64-bit);
only perform sign extension in the first case.

Starting with v4.14, this is exploitable by unprivileged users as long as
the unprivileged_bpf_disabled sysctl isn't set.

Debian assigned CVE-2017-16995 for this issue.

v3:
 - add CVE number (Ben Hutchings)

Fixes: 48461135 ("bpf: allow access into map value arrays")
Signed-off-by: NJann Horn <jannh@google.com>
Acked-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Incorrect signed bounds were being computed.
If the old upper signed bound was positive and the old lower signed bound was
negative, this could cause the new upper signed bound to be too low,
leading to security issues.

Fixes: b03c9f9f ("bpf/verifier: track signed and unsigned min/max values")
Reported-by: NJann Horn <jannh@google.com>
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
[jannh@google.com: changed description to reflect bug impact]
Signed-off-by: NJann Horn <jannh@google.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

[ Note, this is a Git cherry-pick of the following commit:

    506458ef ("locking/barriers: Convert users of lockless_dereference() to READ_ONCE()")

  ... for easier x86 PTI code testing and back-porting. ]

READ_ONCE() now has an implicit smp_read_barrier_depends() call, so it
can be used instead of lockless_dereference() without any change in
semantics.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1508840570-22169-4-git-send-email-will.deacon@arm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Some JITs don't cache skb context on stack in prologue, so when
LD_ABS/IND is used and helper calls yield bpf_helper_changes_pkt_data()
as true, then they temporarily save/restore skb pointer. However,
the assumption that skb always has to be in r1 is a bit of a
gamble. Right now it turned out to be true for all helpers listed
in bpf_helper_changes_pkt_data(), but lets enforce that from verifier
side, so that we make this a guarantee and bail out if the func
proto is misconfigured in future helpers.

In case of BPF helper calls from cBPF, bpf_helper_changes_pkt_data()
is completely unrelevant here (since cBPF is context read-only) and
therefore always false.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Daniel Wagner reported a crash on the BeagleBone Black SoC.

This is a single CPU architecture, and does not have a functional
arch_send_call_function_single_ipi() implementation which can crash
the kernel if that is called.

As it only has one CPU, it shouldn't be called, but if the kernel is
compiled for SMP, the push/pull RT scheduling logic now calls it for
irq_work if the one CPU is overloaded, it can use that function to call
itself and crash the kernel.

Ideally, we should disable the SCHED_FEAT(RT_PUSH_IPI) if the system
only has a single CPU. But SCHED_FEAT is a constant if sched debugging
is turned off. Another fix can also be used, and this should also help
with normal SMP machines. That is, do not initiate the pull code if
there's only one RT overloaded CPU, and that CPU happens to be the
current CPU that is scheduling in a lower priority task.

Even on a system with many CPUs, if there's many RT tasks waiting to
run on a single CPU, and that CPU schedules in another RT task of lower
priority, it will initiate the PULL logic in case there's a higher
priority RT task on another CPU that is waiting to run. But if there is
no other CPU with waiting RT tasks, it will initiate the RT pull logic
on itself (as it still has RT tasks waiting to run). This is a wasted
effort.

Not only does this help with SMP code where the current CPU is the only
one with RT overloaded tasks, it should also solve the issue that
Daniel encountered, because it will prevent the PULL logic from
executing, as there's only one CPU on the system, and the check added
here will cause it to exit the RT pull code.
Reported-by: NDaniel Wagner <wagi@monom.org>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-rt-users <linux-rt-users@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: 4bdced5c ("sched/rt: Simplify the IPI based RT balancing logic")
Link: http://lkml.kernel.org/r/20171202130454.4cbbfe8d@vmware.local.homeSigned-off-by: NIngo Molnar <mingo@kernel.org>

timer_create() specifies via sigevent->sigev_notify the signal delivery for
the new timer. The valid modes are SIGEV_NONE, SIGEV_SIGNAL, SIGEV_THREAD
and (SIGEV_SIGNAL | SIGEV_THREAD_ID).

The sanity check in good_sigevent() is only checking the valid combination
for the SIGEV_THREAD_ID bit, i.e. SIGEV_SIGNAL, but if SIGEV_THREAD_ID is
not set it accepts any random value.

This has no real effects on the posix timer and signal delivery code, but
it affects show_timer() which handles the output of /proc/$PID/timers. That
function uses a string array to pretty print sigev_notify. The access to
that array has no bound checks, so random sigev_notify cause access beyond
the array bounds.

Add proper checks for the valid notify modes and remove the SIGEV_THREAD_ID
masking from various code pathes as SIGEV_NONE can never be set in
combination with SIGEV_THREAD_ID.
Reported-by: NEric Biggers <ebiggers3@gmail.com>
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Reported-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: stable@vger.kernel.org

The stack tracer records a stack dump whenever it sees a stack usage that is
more than what it ever saw before. This can happen at any function that is
being traced. If it happens when the CPU is going idle (or other strange
locations), RCU may not be watching, and in this case, the recording of the
stack trace will trigger a warning. There's been lots of efforts to make
hacks to allow stack tracing to proceed even if RCU is not watching, but
this only causes more issues to appear. Simply do not trace a stack if RCU
is not watching. It probably isn't a bad stack anyway.
Acked-by: N"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

gcc toggle -fisolate-erroneous-paths-dereference (default at -O2
onwards) isolates faulty code paths such as null pointer access, divide
by zero etc.  If gcc port doesnt implement __builtin_trap, an abort() is
generated which causes kernel link error.

In this case, gcc is generating abort due to 'divide by zero' in
lib/mpi/mpih-div.c.

Currently 'frv' and 'arc' are failing.  Previously other arch was also
broken like m32r was fixed by commit d22e3d69 ("m32r: fix build
failure").

Let's define this weak function which is common for all arch and fix the
problem permanently.  We can even remove the arch specific 'abort' after
this is done.

Link: http://lkml.kernel.org/r/1513118956-8718-1-git-send-email-sudipm.mukherjee@gmail.comSigned-off-by: NSudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In testing, we found that nfsd threads may call set_groups in parallel
for the same entry cached in auth.unix.gid, racing in the call of
groups_sort, corrupting the groups for that entry and leading to
permission denials for the client.

This patch:
 - Make groups_sort globally visible.
 - Move the call to groups_sort to the modifiers of group_info
 - Remove the call to groups_sort from set_groups

Link: http://lkml.kernel.org/r/20171211151420.18655-1-thiago.becker@gmail.comSigned-off-by: NThiago Rafael Becker <thiago.becker@gmail.com>
Reviewed-by: NMatthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: NNeilBrown <neilb@suse.com>
Acked-by: N"J. Bruce Fields" <bfields@fieldses.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix a silly copy-paste bug.  We truncated u32 args to u16.

Link: http://lkml.kernel.org/r/20171207101134.107168-1-dvyukov@google.com
Fixes: ded97d2c ("kcov: support comparison operands collection")
Signed-off-by: NDmitry Vyukov <dvyukov@google.com>
Cc: syzkaller@googlegroups.com
Cc: Alexander Potapenko <glider@google.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While using large percpu maps, htab_map_alloc() can hold
cpu for hundreds of ms.

This patch adds cond_resched() calls to percpu alloc/free
call sites, all running in process context.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

When tracing and networking programs are both attached in the
system and both use event-output helpers that eventually call
into perf_event_output(), then we could end up in a situation
where the tracing attached program runs in user context while
a cls_bpf program is triggered on that same CPU out of softirq
context.

Since both rely on the same per-cpu perf_sample_data, we could
potentially corrupt it. This can only ever happen in a combination
of the two types; all tracing programs use a bpf_prog_active
counter to bail out in case a program is already running on
that CPU out of a different context. XDP and cls_bpf programs
by themselves don't have this issue as they run in the same
context only. Therefore, split both perf_sample_data so they
cannot be accessed from each other.

Fixes: 20b9d7ac ("bpf: avoid excessive stack usage for perf_sample_data")
Reported-by: NAlexei Starovoitov <ast@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Tested-by: NSong Liu <songliubraving@fb.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

This code (CONFIG_LOCKDEP_CROSSRELEASE=y and CONFIG_LOCKDEP_COMPLETIONS=y),
while it found a number of old bugs initially, was also causing too many
false positives that caused people to disable lockdep - which is arguably
a worse overall outcome.

If we disable cross-release by default but keep the code upstream then
in practice the most likely outcome is that we'll allow the situation
to degrade gradually, by allowing entropy to introduce more and more
false positives, until it overwhelms maintenance capacity.

Another bad side effect was that people were trying to work around
the false positives by uglifying/complicating unrelated code. There's
a marked difference between annotating locking operations and
uglifying good code just due to bad lock debugging code ...

This gradual decrease in quality happened to a number of debugging
facilities in the kernel, and lockdep is pretty complex already,
so we cannot risk this outcome.

Either cross-release checking can be done right with no false positives,
or it should not be included in the upstream kernel.

( Note that it might make sense to maintain it out of tree and go through
  the false positives every now and then and see whether new bugs were
  introduced. )

Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

When CONFIG_GENERIC_LOCKBEAK=y, locking structures grow an extra int ->break_lock
field which is used to implement raw_spin_is_contended() by setting the field
to 1 when waiting on a lock and clearing it to zero when holding a lock.
However, there are a few problems with this approach:

  - There is a write-write race between a CPU successfully taking the lock
    (and subsequently writing break_lock = 0) and a waiter waiting on
    the lock (and subsequently writing break_lock = 1). This could result
    in a contended lock being reported as uncontended and vice-versa.

  - On machines with store buffers, nothing guarantees that the writes
    to break_lock are visible to other CPUs at any particular time.

  - READ_ONCE/WRITE_ONCE are not used, so the field is potentially
    susceptible to harmful compiler optimisations,

Consequently, the usefulness of this field is unclear and we'd be better off
removing it and allowing architectures to implement raw_spin_is_contended() by
providing a definition of arch_spin_is_contended(), as they can when
CONFIG_GENERIC_LOCKBREAK=n.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1511894539-7988-3-git-send-email-will.deacon@arm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Commit:

  a8a217c2 ("locking/core: Remove {read,spin,write}_can_lock()")

removed the definition of raw_spin_can_lock(), causing the GENERIC_LOCKBREAK
spin_lock() routines to poll the ->break_lock field when waiting on a lock.

This has been reported to cause a deadlock during boot on s390, because
the ->break_lock field is also set by the waiters, and can potentially
remain set indefinitely if no other CPUs come in to take the lock after
it has been released.

This patch removes the explicit spinning on ->break_lock from the waiters,
instead relying on the outer trylock() operation to determine when the
lock is available.
Reported-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Tested-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: a8a217c2 ("locking/core: Remove {read,spin,write}_can_lock()")
Link: http://lkml.kernel.org/r/1511894539-7988-2-git-send-email-will.deacon@arm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The filw was converted from print_symbol() to %pf some time
ago (044c782c "workqueue: fix checkpatch issues").
kallsyms does not seem to be needed anymore.
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Fix the following kernel-doc warnings after code restructuring:

  ../kernel/sched/core.c:5113: warning: No description found for parameter 't'
  ../kernel/sched/core.c:5113: warning: Excess function parameter 'interval' description in 'sched_rr_get_interval'

	get rid of set_fs()")
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: abca5fc5 ("sched_rr_get_interval(): move compat to native,
Link: http://lkml.kernel.org/r/995c6ded-b32e-bbe4-d9f5-4d42d121aff1@infradead.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

sign_extend32 counts the sign bit parameter from 0, not from 1.  So we
have to use "11" for 12th bit, not "12".

This mistake means we have not allowed negative op and cmp args since
commit 30d6e0a4 ("futex: Remove duplicated code and fix undefined
behaviour") till now.

Fixes: 30d6e0a4 ("futex: Remove duplicated code and fix undefined behaviour")
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

kallsyms_symbol_next() returns a boolean (true on success). Currently
kdb_read() tests the return value with an inequality that
unconditionally evaluates to true.

This is fixed in the obvious way and, since the conditional branch is
supposed to be unreachable, we also add a WARN_ON().
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

Unlike running, the runnable part can't be directly propagated through
the hierarchy when we migrate a task. The main reason is that runnable
time can be shared with other sched_entities that stay on the rq and
this runnable time will also remain on prev cfs_rq and must not be
removed.

Instead, we can estimate what should be the new runnable of the prev
cfs_rq and check that this estimation stay in a possible range. The
prop_runnable_sum is a good estimation when adding runnable_sum but
fails most often when we remove it. Instead, we could use the formula
below instead:

  gcfs_rq's runnable_sum = gcfs_rq->avg.load_sum / gcfs_rq->load.weight

which assumes that tasks are equally runnable which is not true but
easy to compute.

Beside these estimates, we have several simple rules that help us to filter
out wrong ones:

 - ge->avg.runnable_sum <= than LOAD_AVG_MAX
 - ge->avg.runnable_sum >= ge->avg.running_sum (ge->avg.util_sum << LOAD_AVG_MAX)
 - ge->avg.runnable_sum can't increase when we detach a task

The effect of these fixes is better cgroups balancing.
Signed-off-by: NVincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Chris Mason <clm@fb.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yuyang Du <yuyang.du@intel.com>
Link: http://lkml.kernel.org/r/1510842112-21028-1-git-send-email-vincent.guittot@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>