The debug field in struct video_device is for internal use only and
drivers should mix that with their own debug module options.

It is handled by the V4L2 core and users can set it using
/sys/class/video4linux/<devX>/debug.

It has been deprecated for some time now, so it is time to remove it
completely from the drivers.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] solo6x10: just pass frame motion flag from hardware, drop additional handling as complicated and unstable

Dropping code (introduced in 316d9e84)
which intends to make raising of motion events more "smooth"(?).

It made motion event never appear in my installation.
That code is complicated, so I couldn't figure out quickly how to fix
it, so dropping it seems better to me.

Another justification is that anyway application would implement
"motion signal stabilization" if required, it is not necessarily kernel
driver's job.
Signed-off-by: NAndrey Utkin <andrey.utkin@corp.bluecherry.net>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The video output functionality never worked for this driver. Now remove the
creation of the output video nodes as well to prevent users from thinking
that video output is available, when it isn't.

To correctly implement this the video output should use vb2 as well, and
that requires rewriting the output DMA setup. But without hardware to test
I am not able to do that.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add support for the VIDIOC_CREATE_BUFS ioctl. This was missing in this
driver and in vb2 it's trivial to add.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This patch converts the cx25821 driver from the old videobuf framework to
the new vb2 framework.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The alsa driver uses videobuf low-level functions that are not
available in vb2, so replace them by driver-specific functions.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The btcx-risc module is no longer used by other drivers except for bttv.
So move it from common to bt8xx and make it part of the bttv driver instead
of as a separate module.

This module should never have been a common module since most of the code
has always been bttv specific.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Those btcx_risc functions are meant for use with bttv, other drivers
should just allocate the memory themselves.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

1) This is not allowed by the kernel coding style
2) Just configure your editor correctly
3) It's really ugly
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The start_streaming op is responsible for starting the video dma,
so it shouldn't be called anymore from the buf_queue op.

Unfortunately, this call to start_video_dma() was added to the
start_streaming op, but was forgotten to be removed from the
buf_queue op, which is where it used to be before the vb2 conversion.

Calling this function twice causes very hard to find errors: sometimes
it works, sometimes it doesn't. It took me a whole friggin' day
to track this down, and in the end it was just luck that my eye suddenly
triggered on that line.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The cx88 vb2 conversion and the vb2 dma_sg improvements were developed separately and
were merged separately. Unfortunately, the patch updating drivers to the dma_sg
improvements didn't take the updated cx88 driver into account. Basically two ships
passing in the night, unaware of one another even though both ships have the same
owner, i.e. me :-)
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reported-by: NChris Lee <updatelee@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The dvb_unregister_device() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Querycap shouldn't set the version field (the core does that for you),
but it should set the device_caps field.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This was missing in this driver, so add this functionality.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

v2:
- Update Kconfig file.

DVBSky T9580 V3 card is the dual tuner card, which supports S/S2 and T2/T/C.
1>DVB-S/S2 frontend: M88DS3103/M88TS2022
2>DVB-T2/T/C frontend: SI2168B40/SI2157A30
2>PCIe bridge: SMI PCIe
Signed-off-by: NNibble Max <nibble.max@gmail.com>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

v2:
-no change, just resend with other patches.

"add_i2c_client" and "del_i2c_client" functions make code shorter and easy to maintain.
Signed-off-by: NNibble Max <nibble.max@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This moves dma_(un)map_sg to the get_userptr/put_userptr and alloc/put
memops of videobuf2-dma-sg.c and adds dma_sync_sg_for_device/cpu to the
prepare/finish memops.

Now that vb2-dma-sg will sync the buffers for you in the prepare/finish
memops we can drop that from the drivers that use dma-sg.

For the solo6x10 driver that was a bit more involved because it needs to
copy JPEG or MPEG headers to the buffer before returning it to userspace,
and that cannot be done in the old place since the buffer there is still
setup for DMA access, not for CPU access. However, the buf_finish
op is the ideal place to do this. By the time buf_finish is called
the buffer is available for CPU access, so copying to the buffer is fine.

[mchehab@osg.samsung.com: Fix a compilation breakage:
 drivers/media/v4l2-core/videobuf2-dma-sg.c:150:19: error: 'struct vb2_dma_sg_buf' has no member named 'dma_sgt']
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NPawel Osciak <pawel@osciak.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Require that dma-sg also uses an allocation context. This is in preparation
for adding prepare/finish memops to sync the memory between DMA and CPU.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NPawel Osciak <pawel@osciak.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Never use sg++, always use sg = sg_next(sg). Scatterlist entries can
be combined if the memory is contiguous but sg++ won't know about that.

As far as I can tell cx88 and ivtv are really broken because of this,
and bttv and cx25821 are OK because vb1 doesn't combine scatterlist
entries.

But regardless, sg++ should never be used, only sg_next is safe.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

In smipcie.c, the function i2c_bit_add_bus() is called. This
function is defined by the I2C bit-banging interfaces enabled
with CONFIG_I2C_ALGOBIT.

As there was no dependency in Kconfig, CONFIG_I2C_ALGOBIT could
be set to "m" while CONFIG_DVB_SMIPCIE was set to "y", resulting
in a build error due to an undefined reference.

This patch adds the dependency on CONFIG_I2C_ALGOBIT in Kconfig
by selecting it when CONFIG_DVB_SMIPCIE is selected.
Signed-off-by: NAndreas Ruprecht <rupran@einserver.de>
Reported-by: NJim Davis <jim.epost@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The cx23885 driver still used sg++ instead of sg = sg_next(sg). This worked with
vb1 since that filled in the sglist manually, page-by-page, but it fails with vb2
which uses core scatterlist code that can combine contiguous scatterlist entries
into one larger entry.

This bug led to the following crash as reported by Mariusz:

[20712.990258] BUG: Bad page state in process vb2-cx23885[0]  pfn:2ca34
[20712.990265] page:ffffea00009c3b60 count:-1 mapcount:0 mapping:          (null) index:0x0
[20712.990266] flags: 0x4000000000000000()
[20712.990268] page dumped because: nonzero _count
[20712.990269] Modules linked in: tun binfmt_misc nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables xt_mark xt_REDIRECT xt_limit xt_conntrack xt_nat xt_tcpudp iptable_mangle iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_filter ip_tables x_tables sit ip_tunnel nvidia(PO) stb6100 stv090x cx88_dvb videobuf_dvb cx88_vp3054_i2c tuner kvm_amd kvm cx8802 k10temp cx8800 cx88xx btcx_risc videobuf_dma_sg videobuf_core usb_storage ds2490 usbhid ftdi_sio cx23885 tveeprom cx2341x videobuf2_dvb videobuf2_core videobuf2_dma_sg videobuf2_memops asus_atk0110 snd_emu10k1 snd_hwdep snd_util_mem snd_ac97_codec ac97_bus snd_rawmidi snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd w1_therm wire ipv6
[20712.990301] CPU: 2 PID: 26942 Comm: vb2-cx23885[0] Tainted: P    B   W  O   3.18.0-rc5-00001-gb3652d1 #2
[20712.990303] Hardware name: System manufacturer System Product Name/M4A785TD-V EVO, BIOS 2105    07/23/2010
[20712.990305]  ffffffff81765734 ffff880137683a78 ffffffff815b6b32 0000000000000006
[20712.990307]  ffffea00009c3b60 ffff880137683aa8 ffffffff8108ec27 ffffffff81765712
[20712.990309]  ffffffff8189c840 0000000000000246 ffffea00009c3b60 ffff880137683b78
[20712.990312] Call Trace:
[20712.990317]  [<ffffffff815b6b32>] dump_stack+0x46/0x58
[20712.990321]  [<ffffffff8108ec27>] bad_page+0xe9/0x107
[20712.990323]  [<ffffffff810912ca>] get_page_from_freelist+0x3b2/0x505
[20712.990326]  [<ffffffff8109150a>] __alloc_pages_nodemask+0xed/0x65f
[20712.990330]  [<ffffffff81047a52>] ? ttwu_do_activate.constprop.78+0x57/0x5c
[20712.990332]  [<ffffffff81049ff3>] ? try_to_wake_up+0x21b/0x22d
[20712.990336]  [<ffffffff810070f4>] dma_generic_alloc_coherent+0x6e/0xf5
[20712.990339]  [<ffffffff810261a9>] gart_alloc_coherent+0x105/0x114
[20712.990341]  [<ffffffff81025963>] ? flush_gart+0x39/0x3d
[20712.990343]  [<ffffffff810260a4>] ? gart_map_sg+0x3a0/0x3a0
[20712.990349]  [<ffffffffa0141a1e>] cx23885_risc_databuffer+0xa7/0x133 [cx23885]
[20712.990354]  [<ffffffffa0142764>] cx23885_buf_prepare+0x121/0x134 [cx23885]
[20712.990359]  [<ffffffffa0144210>] buffer_prepare+0x14/0x16 [cx23885]
[20712.990363]  [<ffffffffa011f101>] __buf_prepare+0x190/0x279 [videobuf2_core]
[20712.990366]  [<ffffffffa011d906>] ? vb2_queue_or_prepare_buf+0xb8/0xc0 [videobuf2_core]
[20712.990369]  [<ffffffffa011f34b>] vb2_internal_qbuf+0x51/0x1e5 [videobuf2_core]
[20712.990372]  [<ffffffffa0120537>] vb2_thread+0x199/0x1f6 [videobuf2_core]
[20712.990376]  [<ffffffffa012039e>] ? vb2_fop_write+0xdf/0xdf [videobuf2_core]
[20712.990379]  [<ffffffff81043e61>] kthread+0xdf/0xe7
[20712.990381]  [<ffffffff81043d82>] ? kthread_create_on_node+0x16d/0x16d
[20712.990384]  [<ffffffff815bd46c>] ret_from_fork+0x7c/0xb0
[20712.990386]  [<ffffffff81043d82>] ? kthread_create_on_node+0x16d/0x16d
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reported-by: NMariusz Bialonczyk <manio@skyboo.net>
Tested-by: NMariusz Bialonczyk <manio@skyboo.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The IRQs have to be acknowledged before they are serviced, otherwise some events
may be skipped. Also, acknowledging IRQs just before returning from the handler
doesn't leave enough time for the device to deassert the INTx line, and for
bridges to propagate this change. This resulted in twice the IRQ rate on ARMv6
dual core CPU.
Signed-off-by: NKrzysztof Ha?asa <khalasa@piap.pl>
Acked-by: NAndrey Utkin <andrey.utkin@corp.bluecherry.net>
Tested-by: NAndrey Utkin <andrey.utkin@corp.bluecherry.net>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This patch fix spelling typo in printk and Kconfig within
various part of kernel sources.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

There's no such thing as "list_struct".
Signed-off-by: NAndrey Utkin <andrey.krieger.utkin@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Acked-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

DVBSky T982 DVB-T2/T/C dual PCIe card:
1>dvb frontend: SI2158A20(tuner),SI2168A30(demod)
2>PCIe bridge: CX23885(port b: parallel mode, port c: serial mode)
3>rc: cx23885 integrated.
Signed-off-by: NNibble Max <nibble.max@gmail.com>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

this patch adds support for using vb2_start_streaming_called()
for cx88-blackbird driver.
Signed-off-by: NLad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

In order to have subsytem agnostic media bus format definitions we've
moved media bus definition to include/uapi/linux/media-bus-format.h and
prefixed values with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT.

Replace all references to the old definitions in pci drivers.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

DVBSky S952 dvb-s/s2 dual PCIe card:
1>dvb frontend: M88TS2022(tuner),M88DS3103(demod)
2>PCIe bridge: CX23885(port b: parallel mode, port c: serial mode)
3>rc: cx23885 integrated.
Signed-off-by: NNibble Max <nibble.max@gmail.com>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Reviewed-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

DVBSky S950 dvb-s/s2 PCIe card:
1>dvb frontend: M88TS2022(tuner),M88DS3103(demod)
2>PCIe bridge: cx23885
3>rc: cx23885 integrated.
Signed-off-by: NNibble Max <nibble.max@gmail.com>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Reviewed-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix many sparse warnings:

drivers/media/pci/saa7164/saa7164-core.c:97:18: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-core.c:122:31: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-core.c:122:31: warning: incorrect type in initializer (different address spaces)
drivers/media/pci/saa7164/saa7164-core.c:122:31:    expected unsigned char [noderef] [usertype] <asn:2>*bufcpu
drivers/media/pci/saa7164/saa7164-core.c:122:31:    got unsigned char [usertype] *<noident>
drivers/media/pci/saa7164/saa7164-core.c:282:44: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-core.c:286:38: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-core.c:286:35: warning: incorrect type in assignment (different address spaces)
drivers/media/pci/saa7164/saa7164-core.c:286:35:    expected unsigned char [noderef] [usertype] <asn:2>*p
drivers/media/pci/saa7164/saa7164-core.c:286:35:    got unsigned char [usertype] *<noident>
drivers/media/pci/saa7164/saa7164-core.c:352:44: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-core.c:527:53: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-core.c:129:30: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:133:38: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:133:72: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:134:35: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:287:61: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:288:65: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:289:65: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:290:65: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:291:65: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:292:65: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:293:65: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:294:65: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-fw.c:548:52: warning: incorrect type in argument 5 (different address spaces)
drivers/media/pci/saa7164/saa7164-fw.c:548:52:    expected unsigned char [usertype] *dst
drivers/media/pci/saa7164/saa7164-fw.c:548:52:    got unsigned char [noderef] [usertype] <asn:2>*
drivers/media/pci/saa7164/saa7164-fw.c:579:44: warning: incorrect type in argument 5 (different address spaces)
drivers/media/pci/saa7164/saa7164-fw.c:579:44:    expected unsigned char [usertype] *dst
drivers/media/pci/saa7164/saa7164-fw.c:579:44:    got unsigned char [noderef] [usertype] <asn:2>*
drivers/media/pci/saa7164/saa7164-fw.c:597:44: warning: incorrect type in argument 5 (different address spaces)
drivers/media/pci/saa7164/saa7164-fw.c:597:44:    expected unsigned char [usertype] *dst
drivers/media/pci/saa7164/saa7164-fw.c:597:44:    got unsigned char [noderef] [usertype] <asn:2>*
drivers/media/pci/saa7164/saa7164-bus.c:36:36: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-bus.c:41:36: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-bus.c:151:19: warning: incorrect type in assignment (different base types)
drivers/media/pci/saa7164/saa7164-bus.c:151:19:    expected unsigned short [unsigned] [usertype] size
drivers/media/pci/saa7164/saa7164-bus.c:151:19:    got restricted __le16 [usertype] <noident>
drivers/media/pci/saa7164/saa7164-bus.c:152:22: warning: incorrect type in assignment (different base types)
drivers/media/pci/saa7164/saa7164-bus.c:152:22:    expected unsigned int [unsigned] [usertype] command
drivers/media/pci/saa7164/saa7164-bus.c:152:22:    got restricted __le32 [usertype] <noident>
drivers/media/pci/saa7164/saa7164-bus.c:153:30: warning: incorrect type in assignment (different base types)
drivers/media/pci/saa7164/saa7164-bus.c:153:30:    expected unsigned short [unsigned] [usertype] controlselector
drivers/media/pci/saa7164/saa7164-bus.c:153:30:    got restricted __le16 [usertype] <noident>
drivers/media/pci/saa7164/saa7164-bus.c:172:20: warning: cast to restricted __le32
drivers/media/pci/saa7164/saa7164-bus.c:173:20: warning: cast to restricted __le32
drivers/media/pci/saa7164/saa7164-bus.c:206:28: warning: cast to restricted __le32
drivers/media/pci/saa7164/saa7164-bus.c:287:9: warning: incorrect type in argument 1 (different base types)
drivers/media/pci/saa7164/saa7164-bus.c:287:9:    expected unsigned int [unsigned] val
drivers/media/pci/saa7164/saa7164-bus.c:287:9:    got restricted __le32 [usertype] <noident>
drivers/media/pci/saa7164/saa7164-bus.c:339:20: warning: cast to restricted __le32
drivers/media/pci/saa7164/saa7164-bus.c:340:20: warning: cast to restricted __le32
drivers/media/pci/saa7164/saa7164-bus.c:463:9: warning: incorrect type in argument 1 (different base types)
drivers/media/pci/saa7164/saa7164-bus.c:463:9:    expected unsigned int [unsigned] val
drivers/media/pci/saa7164/saa7164-bus.c:463:9:    got restricted __le32 [usertype] <noident>
drivers/media/pci/saa7164/saa7164-bus.c:466:21: warning: cast to restricted __le16
drivers/media/pci/saa7164/saa7164-bus.c:467:24: warning: cast to restricted __le32
drivers/media/pci/saa7164/saa7164-bus.c:468:32: warning: cast to restricted __le16
drivers/media/pci/saa7164/saa7164-buffer.c:122:18: warning: incorrect type in assignment (different address spaces)
drivers/media/pci/saa7164/saa7164-buffer.c:122:18:    expected unsigned long long [noderef] [usertype] <asn:2>*cpu
drivers/media/pci/saa7164/saa7164-buffer.c:122:18:    got void *
drivers/media/pci/saa7164/saa7164-buffer.c:127:21: warning: incorrect type in assignment (different address spaces)
drivers/media/pci/saa7164/saa7164-buffer.c:127:21:    expected unsigned long long [noderef] [usertype] <asn:2>*pt_cpu
drivers/media/pci/saa7164/saa7164-buffer.c:127:21:    got void *
drivers/media/pci/saa7164/saa7164-buffer.c:134:20: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-buffer.c:156:63: warning: incorrect type in argument 3 (different address spaces)
drivers/media/pci/saa7164/saa7164-buffer.c:156:63:    expected void *vaddr
drivers/media/pci/saa7164/saa7164-buffer.c:156:63:    got unsigned long long [noderef] [usertype] <asn:2>*cpu
drivers/media/pci/saa7164/saa7164-buffer.c:179:57: warning: incorrect type in argument 3 (different address spaces)
drivers/media/pci/saa7164/saa7164-buffer.c:179:57:    expected void *vaddr
drivers/media/pci/saa7164/saa7164-buffer.c:179:57:    got unsigned long long [noderef] [usertype] <asn:2>*cpu
drivers/media/pci/saa7164/saa7164-buffer.c:180:56: warning: incorrect type in argument 3 (different address spaces)
drivers/media/pci/saa7164/saa7164-buffer.c:180:56:    expected void *vaddr
drivers/media/pci/saa7164/saa7164-buffer.c:180:56:    got unsigned long long [noderef] [usertype] <asn:2>*pt_cpu
drivers/media/pci/saa7164/saa7164-buffer.c:84:17: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-buffer.c:147:31: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-buffer.c:148:17: warning: dereference of noderef expression

Most are caused by pointers marked as __iomem when they aren't or not marked as
__iomem when they should.

Also note that readl/writel already do endian conversion, so there is no need to
do it again.

saa7164_bus_set/get were a bit tricky: you have to make sure the msg endian
conversion is done at the right time, and that the code isn't using fields that
are still little endian instead of cpu-endianness.

The approach chosen is to convert just before writing to the ring buffer
and to convert it back right after reading from the ring buffer.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

It makes no sense to block the SOLO_IRQ_ENCODER interrupt from being sent while
processing an earlier interrupt. New interrupts will just kick the thread
again once it is done processing.
Signed-off-by: NAndrey Utkin <andrey.krieger.utkin@gmail.com>
[hans.verkuil@cisco.com: fix commit description]
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Before, it was called from individual encoder (de)init procedures, which
lead to spare threads running (which were actually lost, leaked).
The current fix uses trivial approach, and the downside is that the
processing thread is working always, even when there's no consumer.
Signed-off-by: NAndrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Fixes this warning:

[  956.730136] ------------[ cut here ]------------
[  956.730143] WARNING: CPU: 1 PID: 10134 at lib/dma-debug.c:963 dma_debug_device_change+0x191/0x1f0()
[  956.730146] pci 0000:07:05.0: DMA-API: device driver has pending DMA allocations while released from device [count=8]
One of leaked entries details: [device address=0x00000000d3d57000] [size=512 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent]
[  956.730147] Modules linked in: solo6x10(-) videobuf2_dma_contig videobuf2_dma_sg videobuf2_memops videobuf2_core ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat videobuf_vmalloc videobuf_core v4l2_common videodev rt2800usb rt2800lib rt2x00usb rt2x00lib mac80211 cfg80211 crc_ccitt usbkbd hid_a4tech hid_generic usbhid snd_hda_codec_hdmi snd_hda_codec_via snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm x86_pkg_temp_thermal snd_timer snd soundcore
[  956.730172] CPU: 1 PID: 10134 Comm: rmmod Not tainted 3.18.0-rc1-next-20141023-zver-dirty #24
[  956.730173] Hardware name: System manufacturer System Product Name/P8H77-V, BIOS 0501 02/28/2012
[  956.730175]  0000000000000009 ffff8801df9e3c58 ffffffff817ffe6b 0000000000000001
[  956.730177]  ffff8801df9e3ca8 ffff8801df9e3c98 ffffffff81091ec7 0000000000000046
[  956.730180]  ffff880215457e90 0000000000000008 ffffffff81cbb10f ffff880215570098
[  956.730183] Call Trace:
[  956.730188]  [<ffffffff817ffe6b>] dump_stack+0x4f/0x7c
[  956.730192]  [<ffffffff81091ec7>] warn_slowpath_common+0x87/0xb0
[  956.730194]  [<ffffffff81091f91>] warn_slowpath_fmt+0x41/0x50
[  956.730197]  [<ffffffff81412558>] ? dma_debug_device_change+0xb8/0x1f0
[  956.730199]  [<ffffffff81412631>] dma_debug_device_change+0x191/0x1f0
[  956.730203]  [<ffffffff810b14ad>] notifier_call_chain+0x4d/0x70
[  956.730205]  [<ffffffff810b15f9>] __blocking_notifier_call_chain+0x59/0x80
[  956.730207]  [<ffffffff810b1631>] blocking_notifier_call_chain+0x11/0x20
[  956.730211]  [<ffffffff815873af>] __device_release_driver+0xcf/0xf0
[  956.730213]  [<ffffffff81587ee8>] driver_detach+0xc8/0xd0
[  956.730215]  [<ffffffff81587147>] bus_remove_driver+0x57/0xd0
[  956.730218]  [<ffffffff815887e9>] driver_unregister+0x29/0x60
[  956.730221]  [<ffffffff81420131>] pci_unregister_driver+0x21/0x90
[  956.730225]  [<ffffffffa03219d7>] solo_pci_driver_exit+0x10/0x12 [solo6x10]
[  956.730228]  [<ffffffff81112ee0>] SyS_delete_module+0x170/0x1f0
[  956.730232]  [<ffffffff813eb76e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  956.730234]  [<ffffffff8180abd2>] system_call_fastpath+0x12/0x17
[  956.730235] ---[ end trace e730af02713a6c53 ]---
[  956.730237] Mapped at:
[  956.730238]  [<ffffffff8141186c>] debug_dma_alloc_coherent+0x3c/0xb0
[  956.730240]  [<ffffffffa03203f6>] solo_enc_v4l2_init+0x706/0xba0 [solo6x10]
[  956.730243]  [<ffffffffa03165b3>] solo_pci_probe+0x503/0x700 [solo6x10]
[  956.730245]  [<ffffffff81420459>] local_pci_probe+0x49/0xa0
[  956.730248]  [<ffffffff814207a1>] pci_device_probe+0xd1/0x120
Signed-off-by: NAndrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This fixes warning from drivers/media/v4l2-core/videobuf2-core.c,
WARN_ON(atomic_read(&q->owned_by_drv_count)).
Signed-off-by: NAndrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Precedence of & and >> is not the same and is not left to right.
shift has higher precedence and should be done after the mask.

This use has a mask then shift which is not the normal style.

Move the shift before the mask to match nearly all the other
uses in kernel.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add a new helper function snd_pcm_stop_xrun() to the standard sequnce
lock/snd_pcm_stop(XRUN)/unlock by a single call, and replace the
existing open codes with this helper.

The function checks the PCM running state to prevent setting the wrong
state, too, for more safety.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

smipcie.c:950:31: warning: Using plain integer as NULL pointer
smipcie.c:973:31: warning: Using plain integer as NULL pointer
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

bttv-cards.c:3874:55: warning: incorrect type in initializer (different base types)

Also clean up the code a little by adding spaces.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

DVBSky S952 V3 card has a dual channels of dvb-s/s2.
1>Frontend: Integrated tuner and demod: M88RS6000
2>PCIe bridge: SMI PCIe
Signed-off-by: NNibble Max <nibble.max@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>